From 1a57c286d8ced1e4144c6201a19bbb70827edee6 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 4 Sep 2016 21:45:56 +0100 Subject: [PATCH] ARM: pxa/lubbock: add pcmcia clock Add the required PCMCIA clock for the SA1111 "1800" device. This clock is used to compute timing information for the PCMCIA interface in the SoC device, rather than the SA1111. Hence, the provision of this clock is a convenience for the driver and does not reflect the hardware, so this must not be copied into DT. Acked-by: Robert Jarzmik Tested-by: Robert Jarzmik Signed-off-by: Russell King --- arch/arm/mach-pxa/lubbock.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c index 7245f3359564..d6159f8ef0c2 100644 --- a/arch/arm/mach-pxa/lubbock.c +++ b/arch/arm/mach-pxa/lubbock.c @@ -137,6 +137,18 @@ static struct pxa2xx_udc_mach_info udc_info __initdata = { // no D+ pullup; lubbock can't connect/disconnect in software }; +static void lubbock_init_pcmcia(void) +{ + struct clk *clk; + + /* Add an alias for the SA1111 PCMCIA clock */ + clk = clk_get_sys("pxa2xx-pcmcia", NULL); + if (!IS_ERR(clk)) { + clkdev_create(clk, NULL, "1800"); + clk_put(clk); + } +} + static struct resource sa1111_resources[] = { [0] = { .start = 0x10000000, @@ -467,6 +479,8 @@ static void __init lubbock_init(void) pxa_set_btuart_info(NULL); pxa_set_stuart_info(NULL); + lubbock_init_pcmcia(); + clk_add_alias("SA1111_CLK", NULL, "GPIO11_CLK", NULL); pxa_set_udc_info(&udc_info); pxa_set_fb_info(NULL, &sharp_lm8v31); -- 2.34.1