From 1b0621af505006c535edab36e7cc154534cabebd Mon Sep 17 00:00:00 2001 From: Heiner Kallweit Date: Thu, 29 Oct 2015 17:28:08 -0200 Subject: [PATCH] [media] media: rc: ir-sharp-decoder: add support for Denon variant of the protocol Denon also uses the Sharp protocol, however with different check bits. It would have been also possible to add this as a separate protocol but this may not be worth the effort. Successfully tested with a Denon RC-1002 remote control. Signed-off-by: Heiner Kallweit Signed-off-by: Mauro Carvalho Chehab --- drivers/media/rc/Kconfig | 3 ++- drivers/media/rc/ir-sharp-decoder.c | 4 +++- 2 files changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/media/rc/Kconfig b/drivers/media/rc/Kconfig index b6e13116c6f5..bd4d68500085 100644 --- a/drivers/media/rc/Kconfig +++ b/drivers/media/rc/Kconfig @@ -101,7 +101,8 @@ config IR_SHARP_DECODER ---help--- Enable this option if you have an infrared remote control which - uses the Sharp protocol, and you need software decoding support. + uses the Sharp protocol (Sharp, Denon), and you need software + decoding support. config IR_MCE_KBD_DECODER tristate "Enable IR raw decoder for the MCE keyboard/mouse protocol" diff --git a/drivers/media/rc/ir-sharp-decoder.c b/drivers/media/rc/ir-sharp-decoder.c index b7acdbae8159..1f331644d07c 100644 --- a/drivers/media/rc/ir-sharp-decoder.c +++ b/drivers/media/rc/ir-sharp-decoder.c @@ -118,7 +118,9 @@ static int ir_sharp_decode(struct rc_dev *dev, struct ir_raw_event ev) if (data->count == SHARP_NBITS) { /* exp,chk bits should be 1,0 */ - if ((data->bits & 0x3) != 0x2) + if ((data->bits & 0x3) != 0x2 && + /* DENON variant, both chk bits 0 */ + (data->bits & 0x3) != 0x0) break; data->state = STATE_ECHO_SPACE; } else { -- 2.34.1