From 1f7750343db115cc2a15024ceb7f86c621b3fb77 Mon Sep 17 00:00:00 2001 From: Xenia Ragiadakou Date: Thu, 10 Oct 2013 10:43:58 +0300 Subject: [PATCH] staging: rtl8192u: fix alignment in r819xU_HTType.h This patch fixes some alignment issues in r819xU_HTType.h to impreove code readability. Signed-off-by: Xenia Ragiadakou Signed-off-by: Greg Kroah-Hartman --- drivers/staging/rtl8192u/r819xU_HTType.h | 174 +++++++++++------------ 1 file changed, 87 insertions(+), 87 deletions(-) diff --git a/drivers/staging/rtl8192u/r819xU_HTType.h b/drivers/staging/rtl8192u/r819xU_HTType.h index 60e8e1b9ebd8..a99e3c764f5d 100644 --- a/drivers/staging/rtl8192u/r819xU_HTType.h +++ b/drivers/staging/rtl8192u/r819xU_HTType.h @@ -10,11 +10,11 @@ /* Operation mode value */ #define HT_OPMODE_NO_PROTECT 0 #define HT_OPMODE_OPTIONAL 1 -#define HT_OPMODE_40MHZ_PROTECT 2 +#define HT_OPMODE_40MHZ_PROTECT 2 #define HT_OPMODE_MIXED 3 /* MIMO Power Save Settings */ -#define MIMO_PS_STATIC 0 +#define MIMO_PS_STATIC 0 #define MIMO_PS_DYNAMIC 1 #define MIMO_PS_NOLIMIT 3 @@ -22,12 +22,12 @@ /* There should be 128 bits to cover all of the MCS rates. However, since * 8190 does not support too much rates, one integer is quite enough. */ -#define sHTCLng 4 +#define sHTCLng 4 -#define HT_SUPPORTED_MCS_1SS_BITMAP 0x000000ff -#define HT_SUPPORTED_MCS_2SS_BITMAP 0x0000ff00 -#define HT_SUPPORTED_MCS_1SS_2SS_BITMAP HT_MCS_1SS_BITMAP|HT_MCS_1SS_2SS_BITMAP +#define HT_SUPPORTED_MCS_1SS_BITMAP 0x000000ff +#define HT_SUPPORTED_MCS_2SS_BITMAP 0x0000ff00 +#define HT_SUPPORTED_MCS_1SS_2SS_BITMAP HT_MCS_1SS_BITMAP|HT_MCS_1SS_2SS_BITMAP typedef enum _HT_MCS_RATE { @@ -41,18 +41,18 @@ typedef enum _HT_MCS_RATE { HT_MCS7 = 0x00000080, HT_MCS8 = 0x00000100, HT_MCS9 = 0x00000200, - HT_MCS10 = 0x00000400, - HT_MCS11 = 0x00000800, - HT_MCS12 = 0x00001000, - HT_MCS13 = 0x00002000, - HT_MCS14 = 0x00004000, - HT_MCS15 = 0x00008000, + HT_MCS10 = 0x00000400, + HT_MCS11 = 0x00000800, + HT_MCS12 = 0x00001000, + HT_MCS13 = 0x00002000, + HT_MCS14 = 0x00004000, + HT_MCS15 = 0x00008000, /* Do not define MCS32 here although 8190 support MCS32 */ } HT_MCS_RATE,*PHT_MCS_RATE; /* Represent Channel Width in HT Capabilities */ typedef enum _HT_CHANNEL_WIDTH { - HT_CHANNEL_WIDTH_20 = 0, + HT_CHANNEL_WIDTH_20 = 0, HT_CHANNEL_WIDTH_20_40 = 1, } HT_CHANNEL_WIDTH, *PHT_CHANNEL_WIDTH; @@ -60,15 +60,15 @@ typedef enum _HT_CHANNEL_WIDTH { * This is available only in 40Mhz mode. */ typedef enum _HT_EXTCHNL_OFFSET { HT_EXTCHNL_OFFSET_NO_EXT = 0, - HT_EXTCHNL_OFFSET_UPPER = 1, + HT_EXTCHNL_OFFSET_UPPER = 1, HT_EXTCHNL_OFFSET_NO_DEF = 2, - HT_EXTCHNL_OFFSET_LOWER = 3, + HT_EXTCHNL_OFFSET_LOWER = 3, } HT_EXTCHNL_OFFSET, *PHT_EXTCHNL_OFFSET; typedef enum _CHNLOP { - CHNLOP_NONE = 0, /* No Action now */ - CHNLOP_SCAN = 1, /* Scan in progress */ - CHNLOP_SWBW = 2, /* Bandwidth switching in progress */ + CHNLOP_NONE = 0, /* No Action now */ + CHNLOP_SCAN = 1, /* Scan in progress */ + CHNLOP_SWBW = 2, /* Bandwidth switching in progress */ CHNLOP_SWCHNL = 3, /* Software Channel switching in progress */ } CHNLOP, *PCHNLOP; @@ -80,12 +80,12 @@ typedef enum _CHNLOP { typedef enum _HT_ACTION { ACT_RECOMMAND_WIDTH = 0, ACT_MIMO_PWR_SAVE = 1, - ACT_PSMP = 2, + ACT_PSMP = 2, ACT_SET_PCO_PHASE = 3, - ACT_MIMO_CHL_MEASURE = 4, - ACT_RECIPROCITY_CORRECT = 5, + ACT_MIMO_CHL_MEASURE = 4, + ACT_RECIPROCITY_CORRECT = 5, ACT_MIMO_CSI_MATRICS = 6, - ACT_MIMO_NOCOMPR_STEER = 7, + ACT_MIMO_NOCOMPR_STEER = 7, ACT_MIMO_COMPR_STEER = 8, ACT_ANTENNA_SELECT = 9, } HT_ACTION, *PHT_ACTION; @@ -94,8 +94,8 @@ typedef enum _HT_ACTION { /* Define sub-carrier mode for 40MHZ. */ typedef enum _HT_Bandwidth_40MHZ_Sub_Carrier { SC_MODE_DUPLICATE = 0, - SC_MODE_LOWER = 1, - SC_MODE_UPPER = 2, + SC_MODE_LOWER = 1, + SC_MODE_UPPER = 2, SC_MODE_FULL40MHZ = 3, } HT_BW40_SC_E; @@ -195,23 +195,23 @@ typedef enum _HT_AGGRE_MODE_E { *----------------------------------------------------------------------------*/ typedef struct _RT_HIGH_THROUGHPUT { - u8 bEnableHT; - u8 bCurrentHTSupport; + u8 bEnableHT; + u8 bCurrentHTSupport; /* Tx 40MHz channel capability */ - u8 bRegBW40MHz; - u8 bCurBW40MHz; + u8 bRegBW40MHz; + u8 bCurBW40MHz; /* Tx Short GI for 40Mhz */ - u8 bRegShortGI40MHz; - u8 bCurShortGI40MHz; + u8 bRegShortGI40MHz; + u8 bCurShortGI40MHz; /* Tx Short GI for 20MHz */ - u8 bRegShortGI20MHz; - u8 bCurShortGI20MHz; + u8 bRegShortGI20MHz; + u8 bCurShortGI20MHz; /* Tx CCK rate capability */ - u8 bRegSuppCCK; - u8 bCurSuppCCK; + u8 bRegSuppCCK; + u8 bCurSuppCCK; /* 802.11n spec version for "peer" */ - HT_SPEC_VER ePeerHTSpecVer; + HT_SPEC_VER ePeerHTSpecVer; /* HT related information for "Self" */ @@ -221,83 +221,83 @@ typedef struct _RT_HIGH_THROUGHPUT { HT_INFORMATION_ELE SelfHTInfo; /* HT related information for "Peer" */ - u8 PeerHTCapBuf[32]; - u8 PeerHTInfoBuf[32]; + u8 PeerHTCapBuf[32]; + u8 PeerHTInfoBuf[32]; /* A-MSDU related */ /* This indicates Tx A-MSDU capability */ - u8 bAMSDU_Support; - u16 nAMSDU_MaxSize; - u8 bCurrent_AMSDU_Support; - u16 nCurrent_AMSDU_MaxSize; + u8 bAMSDU_Support; + u16 nAMSDU_MaxSize; + u8 bCurrent_AMSDU_Support; + u16 nCurrent_AMSDU_MaxSize; /* A-MPDU related */ /* This indicate Tx A-MPDU capability */ - u8 bAMPDUEnable; - u8 bCurrentAMPDUEnable; - u8 AMPDU_Factor; - u8 CurrentAMPDUFactor; - u8 MPDU_Density; - u8 CurrentMPDUDensity; + u8 bAMPDUEnable; + u8 bCurrentAMPDUEnable; + u8 AMPDU_Factor; + u8 CurrentAMPDUFactor; + u8 MPDU_Density; + u8 CurrentMPDUDensity; /* Forced A-MPDU enable */ - HT_AGGRE_MODE_E ForcedAMPDUMode; - u8 ForcedAMPDUFactor; - u8 ForcedMPDUDensity; + HT_AGGRE_MODE_E ForcedAMPDUMode; + u8 ForcedAMPDUFactor; + u8 ForcedMPDUDensity; /* Forced A-MSDU enable */ - HT_AGGRE_MODE_E ForcedAMSDUMode; - u16 ForcedAMSDUMaxSize; + HT_AGGRE_MODE_E ForcedAMSDUMode; + u16 ForcedAMSDUMaxSize; - u8 bForcedShortGI; + u8 bForcedShortGI; - u8 CurrentOpMode; + u8 CurrentOpMode; /* MIMO PS related */ - u8 SelfMimoPs; - u8 PeerMimoPs; + u8 SelfMimoPs; + u8 PeerMimoPs; /* 40MHz Channel Offset settings. */ HT_EXTCHNL_OFFSET CurSTAExtChnlOffset; - u8 bCurTxBW40MHz; /* If we use 40 MHz to Tx */ - u8 PeerBandwidth; + u8 bCurTxBW40MHz; /* If we use 40 MHz to Tx */ + u8 PeerBandwidth; /* For Bandwidth Switching */ - u8 bSwBwInProgress; - CHNLOP ChnlOp; /* software switching channel in progress. */ - u8 SwBwStep; - struct timer_list SwBwTimer; + u8 bSwBwInProgress; + CHNLOP ChnlOp; /* software switching channel in progress. */ + u8 SwBwStep; + struct timer_list SwBwTimer; /* For Realtek proprietary A-MPDU factor for aggregation */ - u8 bRegRT2RTAggregation; - u8 bCurrentRT2RTAggregation; - u8 bCurrentRT2RTLongSlotTime; - u8 szRT2RTAggBuffer[10]; + u8 bRegRT2RTAggregation; + u8 bCurrentRT2RTAggregation; + u8 bCurrentRT2RTLongSlotTime; + u8 szRT2RTAggBuffer[10]; /* Rx Reorder control */ - u8 bRegRxReorderEnable; - u8 bCurRxReorderEnable; - u8 RxReorderWinSize; - u8 RxReorderPendingTime; - u16 RxReorderDropCounter; + u8 bRegRxReorderEnable; + u8 bCurRxReorderEnable; + u8 RxReorderWinSize; + u8 RxReorderPendingTime; + u16 RxReorderDropCounter; #ifdef USB_TX_DRIVER_AGGREGATION_ENABLE - u8 UsbTxAggrNum; + u8 UsbTxAggrNum; #endif #ifdef USB_RX_AGGREGATION_SUPPORT - u8 UsbRxFwAggrEn; - u8 UsbRxFwAggrPageNum; - u8 UsbRxFwAggrPacketNum; - u8 UsbRxFwAggrTimeout; + u8 UsbRxFwAggrEn; + u8 UsbRxFwAggrPageNum; + u8 UsbRxFwAggrPacketNum; + u8 UsbRxFwAggrTimeout; #endif /* Add for Broadcom(Linksys) IOT. */ - u8 bIsPeerBcm; + u8 bIsPeerBcm; /* For IOT issue. */ - u32 IOTAction; + u32 IOTAction; } RT_HIGH_THROUGHPUT, *PRT_HIGH_THROUGHPUT; @@ -341,15 +341,15 @@ typedef struct _BSS_HT { u8 bdSupportHT; /* HT related elements */ - u8 bdHTCapBuf[32]; - u16 bdHTCapLen; - u8 bdHTInfoBuf[32]; - u16 bdHTInfoLen; + u8 bdHTCapBuf[32]; + u16 bdHTCapLen; + u8 bdHTInfoBuf[32]; + u16 bdHTInfoLen; - HT_SPEC_VER bdHTSpecVer; + HT_SPEC_VER bdHTSpecVer; - u8 bdRT2RTAggregation; - u8 bdRT2RTLongSlotTime; + u8 bdRT2RTAggregation; + u8 bdRT2RTLongSlotTime; } BSS_HT, *PBSS_HT; typedef struct _MIMO_RSSI { @@ -363,12 +363,12 @@ typedef struct _MIMO_RSSI { typedef struct _MIMO_EVM { u32 EVM1; - u32 EVM2; + u32 EVM2; } MIMO_EVM, *PMIMO_EVM; typedef struct _FALSE_ALARM_STATISTICS { u32 Cnt_Parity_Fail; - u32 Cnt_Rate_Illegal; + u32 Cnt_Rate_Illegal; u32 Cnt_Crc8_fail; u32 Cnt_all; } FALSE_ALARM_STATISTICS, *PFALSE_ALARM_STATISTICS; -- 2.34.1