From 23402bddf9e56eecb27bbd1e5467b3b79b3dbe58 Mon Sep 17 00:00:00 2001 From: Claudiu Manoil Date: Mon, 12 Aug 2013 13:53:26 +0300 Subject: [PATCH] gianfar: Add flow control support eTSEC has Rx and Tx flow control capabilities that may be enabled through MACCFG1[Rx_Flow, Tx_Flow] bits. These bits must not be set however when eTSEC is operated in Half-Duplex mode. Unfortunately, the driver currently sets these bits unconditionally. This patch adds the proper handling of the PAUSE frame capability register bits by implementing the ethtool -A interface. When pause autoneg is enabled, the controller uses the phy's capability to negotiate PAUSE frame settings with the link partner and reconfigures its Rx_Flow and Tx_Flow settings to match the capabilities of the link partner. If pause autoneg is off, the PAUSE frame generation may be forced manually (ethtool -A). Flow control is disabled by default now. This implementation is inspired by the tg3 driver. Signed-off-by: Lutz Jaenicke Signed-off-by: Claudiu Manoil Signed-off-by: David S. Miller --- drivers/net/ethernet/freescale/gianfar.c | 51 ++++++++++++- drivers/net/ethernet/freescale/gianfar.h | 10 ++- .../net/ethernet/freescale/gianfar_ethtool.c | 74 +++++++++++++++++++ 3 files changed, 132 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/freescale/gianfar.c b/drivers/net/ethernet/freescale/gianfar.c index 3cb464780777..b2c91dcd245f 100644 --- a/drivers/net/ethernet/freescale/gianfar.c +++ b/drivers/net/ethernet/freescale/gianfar.c @@ -1016,7 +1016,14 @@ static int gfar_probe(struct platform_device *ofdev) /* We need to delay at least 3 TX clocks */ udelay(2); - tempval = (MACCFG1_TX_FLOW | MACCFG1_RX_FLOW); + tempval = 0; + if (!priv->pause_aneg_en && priv->tx_pause_en) + tempval |= MACCFG1_TX_FLOW; + if (!priv->pause_aneg_en && priv->rx_pause_en) + tempval |= MACCFG1_RX_FLOW; + /* the soft reset bit is not self-resetting, so we need to + * clear it before resuming normal operation + */ gfar_write(®s->maccfg1, tempval); /* Initialize MACCFG2. */ @@ -1460,7 +1467,7 @@ static int init_phy(struct net_device *dev) struct gfar_private *priv = netdev_priv(dev); uint gigabit_support = priv->device_flags & FSL_GIANFAR_DEV_HAS_GIGABIT ? - SUPPORTED_1000baseT_Full : 0; + GFAR_SUPPORTED_GBIT : 0; phy_interface_t interface; priv->oldlink = 0; @@ -3023,6 +3030,41 @@ static irqreturn_t gfar_interrupt(int irq, void *grp_id) return IRQ_HANDLED; } +static u32 gfar_get_flowctrl_cfg(struct gfar_private *priv) +{ + struct phy_device *phydev = priv->phydev; + u32 val = 0; + + if (!phydev->duplex) + return val; + + if (!priv->pause_aneg_en) { + if (priv->tx_pause_en) + val |= MACCFG1_TX_FLOW; + if (priv->rx_pause_en) + val |= MACCFG1_RX_FLOW; + } else { + u16 lcl_adv, rmt_adv; + u8 flowctrl; + /* get link partner capabilities */ + rmt_adv = 0; + if (phydev->pause) + rmt_adv = LPA_PAUSE_CAP; + if (phydev->asym_pause) + rmt_adv |= LPA_PAUSE_ASYM; + + lcl_adv = mii_advertise_flowctrl(phydev->advertising); + + flowctrl = mii_resolve_flowctrl_fdx(lcl_adv, rmt_adv); + if (flowctrl & FLOW_CTRL_TX) + val |= MACCFG1_TX_FLOW; + if (flowctrl & FLOW_CTRL_RX) + val |= MACCFG1_RX_FLOW; + } + + return val; +} + /* Called every time the controller might need to be made * aware of new link state. The PHY code conveys this * information through variables in the phydev structure, and this @@ -3041,6 +3083,7 @@ static void adjust_link(struct net_device *dev) lock_tx_qs(priv); if (phydev->link) { + u32 tempval1 = gfar_read(®s->maccfg1); u32 tempval = gfar_read(®s->maccfg2); u32 ecntrl = gfar_read(®s->ecntrl); @@ -3089,6 +3132,10 @@ static void adjust_link(struct net_device *dev) priv->oldspeed = phydev->speed; } + tempval1 &= ~(MACCFG1_TX_FLOW | MACCFG1_RX_FLOW); + tempval1 |= gfar_get_flowctrl_cfg(priv); + + gfar_write(®s->maccfg1, tempval1); gfar_write(®s->maccfg2, tempval); gfar_write(®s->ecntrl, ecntrl); diff --git a/drivers/net/ethernet/freescale/gianfar.h b/drivers/net/ethernet/freescale/gianfar.h index ee19f2c138a6..46f56f36118f 100644 --- a/drivers/net/ethernet/freescale/gianfar.h +++ b/drivers/net/ethernet/freescale/gianfar.h @@ -146,6 +146,10 @@ extern const char gfar_driver_version[]; | SUPPORTED_Autoneg \ | SUPPORTED_MII) +#define GFAR_SUPPORTED_GBIT (SUPPORTED_1000baseT_Full \ + | SUPPORTED_Pause \ + | SUPPORTED_Asym_Pause) + /* TBI register addresses */ #define MII_TBICON 0x11 @@ -1100,7 +1104,11 @@ struct gfar_private { /* Wake-on-LAN enabled */ wol_en:1, /* Enable priorty based Tx scheduling in Hw */ - prio_sched_en:1; + prio_sched_en:1, + /* Flow control flags */ + pause_aneg_en:1, + tx_pause_en:1, + rx_pause_en:1; /* The total tx and rx ring size for the enabled queues */ unsigned int total_tx_ring_size; diff --git a/drivers/net/ethernet/freescale/gianfar_ethtool.c b/drivers/net/ethernet/freescale/gianfar_ethtool.c index 21cd88124ca9..d3d7ede27ef1 100644 --- a/drivers/net/ethernet/freescale/gianfar_ethtool.c +++ b/drivers/net/ethernet/freescale/gianfar_ethtool.c @@ -535,6 +535,78 @@ static int gfar_sringparam(struct net_device *dev, return err; } +static void gfar_gpauseparam(struct net_device *dev, + struct ethtool_pauseparam *epause) +{ + struct gfar_private *priv = netdev_priv(dev); + + epause->autoneg = !!priv->pause_aneg_en; + epause->rx_pause = !!priv->rx_pause_en; + epause->tx_pause = !!priv->tx_pause_en; +} + +static int gfar_spauseparam(struct net_device *dev, + struct ethtool_pauseparam *epause) +{ + struct gfar_private *priv = netdev_priv(dev); + struct phy_device *phydev = priv->phydev; + struct gfar __iomem *regs = priv->gfargrp[0].regs; + u32 oldadv, newadv; + + if (!(phydev->supported & SUPPORTED_Pause) || + (!(phydev->supported & SUPPORTED_Asym_Pause) && + (epause->rx_pause != epause->tx_pause))) + return -EINVAL; + + priv->rx_pause_en = priv->tx_pause_en = 0; + if (epause->rx_pause) { + priv->rx_pause_en = 1; + + if (epause->tx_pause) { + priv->tx_pause_en = 1; + /* FLOW_CTRL_RX & TX */ + newadv = ADVERTISED_Pause; + } else /* FLOW_CTLR_RX */ + newadv = ADVERTISED_Pause | ADVERTISED_Asym_Pause; + } else if (epause->tx_pause) { + priv->tx_pause_en = 1; + /* FLOW_CTLR_TX */ + newadv = ADVERTISED_Asym_Pause; + } else + newadv = 0; + + if (epause->autoneg) + priv->pause_aneg_en = 1; + else + priv->pause_aneg_en = 0; + + oldadv = phydev->advertising & + (ADVERTISED_Pause | ADVERTISED_Asym_Pause); + if (oldadv != newadv) { + phydev->advertising &= + ~(ADVERTISED_Pause | ADVERTISED_Asym_Pause); + phydev->advertising |= newadv; + if (phydev->autoneg) + /* inform link partner of our + * new flow ctrl settings + */ + return phy_start_aneg(phydev); + + if (!epause->autoneg) { + u32 tempval; + tempval = gfar_read(®s->maccfg1); + tempval &= ~(MACCFG1_TX_FLOW | MACCFG1_RX_FLOW); + if (priv->tx_pause_en) + tempval |= MACCFG1_TX_FLOW; + if (priv->rx_pause_en) + tempval |= MACCFG1_RX_FLOW; + gfar_write(®s->maccfg1, tempval); + } + } + + return 0; +} + int gfar_set_features(struct net_device *dev, netdev_features_t features) { struct gfar_private *priv = netdev_priv(dev); @@ -1806,6 +1878,8 @@ const struct ethtool_ops gfar_ethtool_ops = { .set_coalesce = gfar_scoalesce, .get_ringparam = gfar_gringparam, .set_ringparam = gfar_sringparam, + .get_pauseparam = gfar_gpauseparam, + .set_pauseparam = gfar_spauseparam, .get_strings = gfar_gstrings, .get_sset_count = gfar_sset_count, .get_ethtool_stats = gfar_fill_stats, -- 2.34.1