From 24a385253d4ceec4b1304926e7159344881b6497 Mon Sep 17 00:00:00 2001 From: Dawn Perchik Date: Sat, 4 Apr 1998 18:06:55 +0000 Subject: [PATCH] * infrun.c: Fix prototype of signals_info to match static funtion. --- gdb/ChangeLog | 7 ++++ gdb/infrun.c | 92 ++++++++++++++++++++++++++++++++++++++++----------- 2 files changed, 80 insertions(+), 19 deletions(-) diff --git a/gdb/ChangeLog b/gdb/ChangeLog index 0584971d41..70f085deea 100644 --- a/gdb/ChangeLog +++ b/gdb/ChangeLog @@ -1,3 +1,10 @@ +Sat Apr 4 10:05:00 1998 Dawn Perchik + * infrun.c: Fix prototype of signals_info to match static funtion. + +Thu Apr 2 12:47:41 1998 Frank Ch. Eigler + * sol-thread.c (sol_thread_store_registers): Save & restore new + value of single updated register to prevent accidental clobbering. + Wed Apr 1 22:01:09 1998 Mark Alexander * config/sparc/tm-sparclite.h (TARGET_BYTE_ORDER_SELECTABLE): Define. diff --git a/gdb/infrun.c b/gdb/infrun.c index 2e1dc95f63..9c5d1ea8c8 100644 --- a/gdb/infrun.c +++ b/gdb/infrun.c @@ -1,6 +1,6 @@ /* Target-struct-independent code to start (run) and stop an inferior process. - Copyright 1986, 1987, 1988, 1989, 1991, 1992, 1993, 1994, 1995, 1996 - Free Software Foundation, Inc. + Copyright 1986, 1987, 1988, 1989, 1991, 1992, 1993, 1994, 1995, 1996, 1997, + 1998 Free Software Foundation, Inc. This file is part of GDB. @@ -31,6 +31,7 @@ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ #include "target.h" #include "gdbthread.h" #include "annotate.h" +#include "symfile.h" /* for overlay functions */ #include @@ -82,6 +83,15 @@ static void delete_breakpoint_current_contents PARAMS ((PTR)); #define DYNAMIC_TRAMPOLINE_NEXTPC(pc) 0 #endif +/* On SVR4 based systems, determining the callee's address is exceedingly + difficult and depends on the implementation of the run time loader. + If we are stepping at the source level, we single step until we exit + the run time loader code and reach the callee's address. */ + +#ifndef IN_SOLIB_DYNSYM_RESOLVE_CODE +#define IN_SOLIB_DYNSYM_RESOLVE_CODE(pc) 0 +#endif + /* For SVR4 shared libraries, each call goes through a small piece of trampoline code in the ".plt" section. IN_SOLIB_CALL_TRAMPOLINE evaluates to nonzero if we are current stopped in one of these. */ @@ -489,6 +499,10 @@ wait_for_inferior () while (1) { + extern int overlay_cache_invalid; /* declared in symfile.h */ + + overlay_cache_invalid = 1; + /* We have to invalidate the registers BEFORE calling target_wait because they can be loaded from the target while in target_wait. This makes remote debugging a bit more efficient for those targets that provide @@ -512,11 +526,12 @@ wait_for_inferior () /* If it's a new process, add it to the thread database */ - if (pid != inferior_pid + if (w.kind != TARGET_WAITKIND_EXITED + && pid != inferior_pid && !in_thread_list (pid)) { - fprintf_unfiltered (gdb_stderr, "[New %s]\n", target_pid_to_str (pid)); add_thread (pid); + printf_filtered ("[New %s]\n", target_pid_to_str (pid)); /* We may want to consider not doing a resume here in order to give the user a chance to play with the new thread. It might be good @@ -533,12 +548,35 @@ wait_for_inferior () switch (w.kind) { case TARGET_WAITKIND_LOADED: - /* Ignore it gracefully. */ - if (breakpoints_inserted) + /* Ignore gracefully during startup of the inferior, as it + might be the shell which has just loaded some objects, + otherwise add the symbols for the newly loaded objects. */ +#ifdef SOLIB_ADD + if (!stop_soon_quietly) { - mark_breakpoints_out (); - insert_breakpoints (); + extern int auto_solib_add; + + /* Remove breakpoints, SOLIB_ADD might adjust + breakpoint addresses via breakpoint_re_set. */ + if (breakpoints_inserted) + remove_breakpoints (); + + /* Check for any newly added shared libraries if we're + supposed to be adding them automatically. */ + if (auto_solib_add) + { + /* Switch terminal for any messages produced by + breakpoint_re_set. */ + target_terminal_ours_for_output (); + SOLIB_ADD (NULL, 0, NULL); + target_terminal_inferior (); + } + + /* Reinsert breakpoints and continue. */ + if (breakpoints_inserted) + insert_breakpoints (); } +#endif resume (0, TARGET_SIGNAL_0); continue; @@ -710,7 +748,6 @@ wait_for_inferior () &step_frame_address, &handling_longjmp, &another_trap); printf_filtered ("[Switching to %s]\n", target_pid_to_str (pid)); - flush_cached_frames (); } @@ -778,6 +815,7 @@ wait_for_inferior () write_pc (stop_pc - DECR_PC_AFTER_BREAK); remove_breakpoints (); + registers_changed(); target_resume (pid, 1, TARGET_SIGNAL_0); /* Single step */ if (target_wait_hook) @@ -1181,6 +1219,13 @@ wait_for_inferior () /* We stepped out of the stepping range. */ + /* If we are stepping at the source level and entered the runtime + loader dynamic symbol resolution code, we keep on single stepping + until we exit the run time loader code and reach the callee's + address. */ + if (step_over_calls < 0 && IN_SOLIB_DYNSYM_RESOLVE_CODE (stop_pc)) + goto keep_going; + /* We can't update step_sp every time through the loop, because reading the stack pointer would slow down stepping too much. But we can update it every time we leave the step range. */ @@ -1207,7 +1252,8 @@ wait_for_inferior () struct symtab_and_line sr_sal; INIT_SAL (&sr_sal); /* initialize to zeroes */ - sr_sal.pc = prev_pc; + sr_sal.pc = prev_pc; + sr_sal.section = find_pc_overlay (sr_sal.pc); /* We could probably be setting the frame to step_frame_address; I don't think anyone thought to try it. */ step_resume_breakpoint = @@ -1343,7 +1389,8 @@ wait_for_inferior () /* Why isn't this s_a_l called "sr_sal", like all of the other s_a_l's where this code is duplicated? */ INIT_SAL (&xxx); /* initialize to zeroes */ - xxx.pc = tmp; + xxx.pc = tmp; + xxx.section = find_pc_overlay (xxx.pc); step_resume_breakpoint = set_momentary_breakpoint (xxx, NULL, bp_step_resume); insert_breakpoints (); @@ -1373,12 +1420,13 @@ step_over_function: INIT_SAL (&sr_sal); /* initialize to zeroes */ sr_sal.pc = - ADDR_BITS_REMOVE - (SAVED_PC_AFTER_CALL (get_current_frame ())); + ADDR_BITS_REMOVE (SAVED_PC_AFTER_CALL (get_current_frame ())); + sr_sal.section = find_pc_overlay (sr_sal.pc); step_resume_breakpoint = set_momentary_breakpoint (sr_sal, get_current_frame (), bp_step_resume); - step_resume_breakpoint->frame = step_frame_address; + if (!IN_SOLIB_DYNSYM_RESOLVE_CODE (sr_sal.pc)) + step_resume_breakpoint->frame = step_frame_address; if (breakpoints_inserted) insert_breakpoints (); } @@ -1421,7 +1469,8 @@ step_into_function: struct symtab_and_line sr_sal; INIT_SAL (&sr_sal); /* initialize to zeroes */ - sr_sal.pc = stop_func_start; + sr_sal.pc = stop_func_start; + sr_sal.section = find_pc_overlay (stop_func_start); /* Do not specify what the fp should be when we stop since on some machines the prologue is where the new fp value is established. */ @@ -1464,7 +1513,8 @@ step_into_function: struct symtab_and_line sr_sal; INIT_SAL (&sr_sal); /* initialize to zeroes */ - sr_sal.pc = tmp; + sr_sal.pc = tmp; + sr_sal.section = find_pc_overlay (sr_sal.pc); /* Do not specify what the fp should be when we stop since on some machines the prologue is where the new fp value is established. */ @@ -1543,7 +1593,8 @@ step_into_function: struct symtab_and_line sr_sal; INIT_SAL (&sr_sal); /* initialize to zeroes */ - sr_sal.pc = prev_pc; + sr_sal.pc = prev_pc; + sr_sal.section = find_pc_overlay (sr_sal.pc); /* We perhaps could set the frame if we kept track of what the frame corresponding to prev_pc was. But we don't, so don't. */ @@ -1803,9 +1854,12 @@ sig_print_info (oursig) enum target_signal oursig; { char *name = target_signal_to_name (oursig); + int name_padding = 13 - strlen (name); + if (name_padding <= 0) + name_padding = 0; + printf_filtered ("%s", name); - printf_filtered ("%*.*s ", 13 - strlen (name), 13 - strlen (name), - " "); + printf_filtered ("%*.*s ", name_padding, name_padding, " "); printf_filtered ("%s\t", signal_stop[oursig] ? "Yes" : "No"); printf_filtered ("%s\t", signal_print[oursig] ? "Yes" : "No"); printf_filtered ("%s\t\t", signal_program[oursig] ? "Yes" : "No"); -- 2.34.1