From 2c91e61dc97cce57ffd9dd654a6ee284e1f45a1f Mon Sep 17 00:00:00 2001 From: Boris BREZILLON Date: Tue, 23 Sep 2014 16:45:12 +0200 Subject: [PATCH] rtc: at91sam9: add DT bindings documentation Add RTT bindings documentation. Signed-off-by: Boris BREZILLON Acked-by: Johan Hovold Acked-by: Arnd Bergmann Signed-off-by: Nicolas Ferre --- .../bindings/rtc/atmel,at91sam9-rtc.txt | 23 +++++++++++++++++++ 1 file changed, 23 insertions(+) create mode 100644 Documentation/devicetree/bindings/rtc/atmel,at91sam9-rtc.txt diff --git a/Documentation/devicetree/bindings/rtc/atmel,at91sam9-rtc.txt b/Documentation/devicetree/bindings/rtc/atmel,at91sam9-rtc.txt new file mode 100644 index 000000000000..6ae79d1843f3 --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/atmel,at91sam9-rtc.txt @@ -0,0 +1,23 @@ +Atmel AT91SAM9260 Real Time Timer + +Required properties: +- compatible: should be: "atmel,at91sam9260-rtt" +- reg: should encode the memory region of the RTT controller +- interrupts: rtt alarm/event interrupt +- clocks: should contain the 32 KHz slow clk that will drive the RTT block. +- atmel,rtt-rtc-time-reg: should encode the GPBR register used to store + the time base when the RTT is used as an RTC. + The first cell should point to the GPBR node and the second one + encode the offset within the GPBR block (or in other words, the + GPBR register used to store the time base). + + +Example: + +rtt@fffffd20 { + compatible = "atmel,at91sam9260-rtt"; + reg = <0xfffffd20 0x10>; + interrupts = <1 4 7>; + clocks = <&clk32k>; + atmel,rtt-rtc-time-reg = <&gpbr 0x0>; +}; -- 2.34.1