From 3428f018e6101fe2b999a39850755e8c70a72c75 Mon Sep 17 00:00:00 2001 From: =?utf8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Tue, 1 Apr 2014 09:42:20 +0200 Subject: [PATCH] i2c: efm32: fix binding doc MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Transfer-Encoding: 8bit Fix dt compatible string in the binding document which was changed during review in the driver, but it seem I messed up to adapt the documentation accordingly. Also change status from "disabled" to "ok" which makes more sense for an example. Signed-off-by: Uwe Kleine-König Signed-off-by: Wolfram Sang --- Documentation/devicetree/bindings/i2c/i2c-efm32.txt | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/Documentation/devicetree/bindings/i2c/i2c-efm32.txt b/Documentation/devicetree/bindings/i2c/i2c-efm32.txt index ead4dd33ab66..fc15ac519437 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-efm32.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-efm32.txt @@ -3,7 +3,7 @@ Required properties : - reg : Offset and length of the register set for the device - - compatible : should be "efm32,i2c" + - compatible : should be "energymicro,efm32-i2c" - interrupts : the interrupt number - clocks : reference to the module clock @@ -17,12 +17,12 @@ Example: i2c0: i2c@4000a000 { #address-cells = <1>; #size-cells = <0>; - compatible = "efm32,i2c"; + compatible = "energymicro,efm32-i2c"; reg = <0x4000a000 0x400>; interrupts = <9>; clocks = <&cmu clk_HFPERCLKI2C0>; clock-frequency = <100000>; - status = "disabled"; + status = "ok"; efm32,location = <3>; eeprom@50 { -- 2.34.1