From 363c2cd657afd8138b06f459baa9b6eb892d488f Mon Sep 17 00:00:00 2001 From: Phoebe Buckheister Date: Wed, 18 Jun 2014 16:28:49 +0200 Subject: [PATCH] at86rf230: fix irq setup Commit 8eba0eefae24953962067 ("at86rf230: remove irq_type in request_irq") removed the trigger configuration when requesting an irq, and instead relied on the interrupt trigger to be properly configured already. This does not seem to be an assumption that can be safely made, since boards disable all interrupt triggers on boot. On these boards, force the irq to trigger on rising edge, which is also the default for the chip. Signed-off-by: Phoebe Buckheister Signed-off-by: David S. Miller --- drivers/net/ieee802154/at86rf230.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/net/ieee802154/at86rf230.c b/drivers/net/ieee802154/at86rf230.c index 4517b149ed07..50899416f668 100644 --- a/drivers/net/ieee802154/at86rf230.c +++ b/drivers/net/ieee802154/at86rf230.c @@ -1137,6 +1137,8 @@ static int at86rf230_probe(struct spi_device *spi) dev->flags = IEEE802154_HW_OMIT_CKSUM | IEEE802154_HW_AACK; irq_type = irq_get_trigger_type(spi->irq); + if (!irq_type) + irq_type = IRQF_TRIGGER_RISING; if (irq_type & (IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING)) { irq_worker = at86rf230_irqwork; irq_handler = at86rf230_isr; @@ -1168,7 +1170,8 @@ static int at86rf230_probe(struct spi_device *spi) if (rc) goto err_hw_init; - rc = devm_request_irq(&spi->dev, spi->irq, irq_handler, IRQF_SHARED, + rc = devm_request_irq(&spi->dev, spi->irq, irq_handler, + IRQF_SHARED | irq_type, dev_name(&spi->dev), lp); if (rc) goto err_hw_init; -- 2.34.1