From 4612c715a6ea6b3af2aee0163c0721375b2548d7 Mon Sep 17 00:00:00 2001 From: Denys Vlasenko Date: Mon, 18 May 2015 12:58:40 +0200 Subject: [PATCH] mtd: cfi: deinline large functions With this .config: http://busybox.net/~vda/kernel_config, after uninlining these functions have sizes and callsite counts as follows: cfi_udelay(): 74 bytes, 26 callsites cfi_send_gen_cmd(): 153 bytes, 95 callsites cfi_build_cmd(): 274 bytes, 123 callsites cfi_build_cmd_addr(): 49 bytes, 15 callsites cfi_merge_status(): 230 bytes, 3 callsites Reduction in code size is about 50,000: text data bss dec hex filename 85842882 22294584 20627456 128764922 7accbfa vmlinux.before 85789648 22294616 20627456 128711720 7abfc28 vmlinux Signed-off-by: Denys Vlasenko CC: Dan Carpenter CC: Jingoo Han CC: Brian Norris CC: Aaron Sierra CC: Artem Bityutskiy CC: David Woodhouse CC: linux-mtd@lists.infradead.org CC: linux-kernel@vger.kernel.org Signed-off-by: Brian Norris --- drivers/mtd/chips/cfi_util.c | 188 +++++++++++++++++++++++++++++++++++ include/linux/mtd/cfi.h | 188 ++--------------------------------- 2 files changed, 196 insertions(+), 180 deletions(-) diff --git a/drivers/mtd/chips/cfi_util.c b/drivers/mtd/chips/cfi_util.c index 09c79bd0b4f4..6f16552cd59f 100644 --- a/drivers/mtd/chips/cfi_util.c +++ b/drivers/mtd/chips/cfi_util.c @@ -23,6 +23,194 @@ #include #include +void cfi_udelay(int us) +{ + if (us >= 1000) { + msleep((us+999)/1000); + } else { + udelay(us); + cond_resched(); + } +} +EXPORT_SYMBOL(cfi_udelay); + +/* + * Returns the command address according to the given geometry. + */ +uint32_t cfi_build_cmd_addr(uint32_t cmd_ofs, + struct map_info *map, struct cfi_private *cfi) +{ + unsigned bankwidth = map_bankwidth(map); + unsigned interleave = cfi_interleave(cfi); + unsigned type = cfi->device_type; + uint32_t addr; + + addr = (cmd_ofs * type) * interleave; + + /* Modify the unlock address if we are in compatibility mode. + * For 16bit devices on 8 bit busses + * and 32bit devices on 16 bit busses + * set the low bit of the alternating bit sequence of the address. + */ + if (((type * interleave) > bankwidth) && ((cmd_ofs & 0xff) == 0xaa)) + addr |= (type >> 1)*interleave; + + return addr; +} +EXPORT_SYMBOL(cfi_build_cmd_addr); + +/* + * Transforms the CFI command for the given geometry (bus width & interleave). + * It looks too long to be inline, but in the common case it should almost all + * get optimised away. + */ +map_word cfi_build_cmd(u_long cmd, struct map_info *map, struct cfi_private *cfi) +{ + map_word val = { {0} }; + int wordwidth, words_per_bus, chip_mode, chips_per_word; + unsigned long onecmd; + int i; + + /* We do it this way to give the compiler a fighting chance + of optimising away all the crap for 'bankwidth' larger than + an unsigned long, in the common case where that support is + disabled */ + if (map_bankwidth_is_large(map)) { + wordwidth = sizeof(unsigned long); + words_per_bus = (map_bankwidth(map)) / wordwidth; // i.e. normally 1 + } else { + wordwidth = map_bankwidth(map); + words_per_bus = 1; + } + + chip_mode = map_bankwidth(map) / cfi_interleave(cfi); + chips_per_word = wordwidth * cfi_interleave(cfi) / map_bankwidth(map); + + /* First, determine what the bit-pattern should be for a single + device, according to chip mode and endianness... */ + switch (chip_mode) { + default: BUG(); + case 1: + onecmd = cmd; + break; + case 2: + onecmd = cpu_to_cfi16(map, cmd); + break; + case 4: + onecmd = cpu_to_cfi32(map, cmd); + break; + } + + /* Now replicate it across the size of an unsigned long, or + just to the bus width as appropriate */ + switch (chips_per_word) { + default: BUG(); +#if BITS_PER_LONG >= 64 + case 8: + onecmd |= (onecmd << (chip_mode * 32)); +#endif + case 4: + onecmd |= (onecmd << (chip_mode * 16)); + case 2: + onecmd |= (onecmd << (chip_mode * 8)); + case 1: + ; + } + + /* And finally, for the multi-word case, replicate it + in all words in the structure */ + for (i=0; i < words_per_bus; i++) { + val.x[i] = onecmd; + } + + return val; +} +EXPORT_SYMBOL(cfi_build_cmd); + +unsigned long cfi_merge_status(map_word val, struct map_info *map, + struct cfi_private *cfi) +{ + int wordwidth, words_per_bus, chip_mode, chips_per_word; + unsigned long onestat, res = 0; + int i; + + /* We do it this way to give the compiler a fighting chance + of optimising away all the crap for 'bankwidth' larger than + an unsigned long, in the common case where that support is + disabled */ + if (map_bankwidth_is_large(map)) { + wordwidth = sizeof(unsigned long); + words_per_bus = (map_bankwidth(map)) / wordwidth; // i.e. normally 1 + } else { + wordwidth = map_bankwidth(map); + words_per_bus = 1; + } + + chip_mode = map_bankwidth(map) / cfi_interleave(cfi); + chips_per_word = wordwidth * cfi_interleave(cfi) / map_bankwidth(map); + + onestat = val.x[0]; + /* Or all status words together */ + for (i=1; i < words_per_bus; i++) { + onestat |= val.x[i]; + } + + res = onestat; + switch(chips_per_word) { + default: BUG(); +#if BITS_PER_LONG >= 64 + case 8: + res |= (onestat >> (chip_mode * 32)); +#endif + case 4: + res |= (onestat >> (chip_mode * 16)); + case 2: + res |= (onestat >> (chip_mode * 8)); + case 1: + ; + } + + /* Last, determine what the bit-pattern should be for a single + device, according to chip mode and endianness... */ + switch (chip_mode) { + case 1: + break; + case 2: + res = cfi16_to_cpu(map, res); + break; + case 4: + res = cfi32_to_cpu(map, res); + break; + default: BUG(); + } + return res; +} +EXPORT_SYMBOL(cfi_merge_status); + +/* + * Sends a CFI command to a bank of flash for the given geometry. + * + * Returns the offset in flash where the command was written. + * If prev_val is non-null, it will be set to the value at the command address, + * before the command was written. + */ +uint32_t cfi_send_gen_cmd(u_char cmd, uint32_t cmd_addr, uint32_t base, + struct map_info *map, struct cfi_private *cfi, + int type, map_word *prev_val) +{ + map_word val; + uint32_t addr = base + cfi_build_cmd_addr(cmd_addr, map, cfi); + val = cfi_build_cmd(cmd, map, cfi); + + if (prev_val) + *prev_val = map_read(map, addr); + + map_write(map, val, addr); + + return addr - base; +} +EXPORT_SYMBOL(cfi_send_gen_cmd); + int __xipram cfi_qry_present(struct map_info *map, __u32 base, struct cfi_private *cfi) { diff --git a/include/linux/mtd/cfi.h b/include/linux/mtd/cfi.h index 299d7d31fe53..9b57a9b1b081 100644 --- a/include/linux/mtd/cfi.h +++ b/include/linux/mtd/cfi.h @@ -296,183 +296,19 @@ struct cfi_private { struct flchip chips[0]; /* per-chip data structure for each chip */ }; -/* - * Returns the command address according to the given geometry. - */ -static inline uint32_t cfi_build_cmd_addr(uint32_t cmd_ofs, - struct map_info *map, struct cfi_private *cfi) -{ - unsigned bankwidth = map_bankwidth(map); - unsigned interleave = cfi_interleave(cfi); - unsigned type = cfi->device_type; - uint32_t addr; - - addr = (cmd_ofs * type) * interleave; - - /* Modify the unlock address if we are in compatibility mode. - * For 16bit devices on 8 bit busses - * and 32bit devices on 16 bit busses - * set the low bit of the alternating bit sequence of the address. - */ - if (((type * interleave) > bankwidth) && ((cmd_ofs & 0xff) == 0xaa)) - addr |= (type >> 1)*interleave; - - return addr; -} - -/* - * Transforms the CFI command for the given geometry (bus width & interleave). - * It looks too long to be inline, but in the common case it should almost all - * get optimised away. - */ -static inline map_word cfi_build_cmd(u_long cmd, struct map_info *map, struct cfi_private *cfi) -{ - map_word val = { {0} }; - int wordwidth, words_per_bus, chip_mode, chips_per_word; - unsigned long onecmd; - int i; - - /* We do it this way to give the compiler a fighting chance - of optimising away all the crap for 'bankwidth' larger than - an unsigned long, in the common case where that support is - disabled */ - if (map_bankwidth_is_large(map)) { - wordwidth = sizeof(unsigned long); - words_per_bus = (map_bankwidth(map)) / wordwidth; // i.e. normally 1 - } else { - wordwidth = map_bankwidth(map); - words_per_bus = 1; - } - - chip_mode = map_bankwidth(map) / cfi_interleave(cfi); - chips_per_word = wordwidth * cfi_interleave(cfi) / map_bankwidth(map); - - /* First, determine what the bit-pattern should be for a single - device, according to chip mode and endianness... */ - switch (chip_mode) { - default: BUG(); - case 1: - onecmd = cmd; - break; - case 2: - onecmd = cpu_to_cfi16(map, cmd); - break; - case 4: - onecmd = cpu_to_cfi32(map, cmd); - break; - } - - /* Now replicate it across the size of an unsigned long, or - just to the bus width as appropriate */ - switch (chips_per_word) { - default: BUG(); -#if BITS_PER_LONG >= 64 - case 8: - onecmd |= (onecmd << (chip_mode * 32)); -#endif - case 4: - onecmd |= (onecmd << (chip_mode * 16)); - case 2: - onecmd |= (onecmd << (chip_mode * 8)); - case 1: - ; - } +uint32_t cfi_build_cmd_addr(uint32_t cmd_ofs, + struct map_info *map, struct cfi_private *cfi); - /* And finally, for the multi-word case, replicate it - in all words in the structure */ - for (i=0; i < words_per_bus; i++) { - val.x[i] = onecmd; - } - - return val; -} +map_word cfi_build_cmd(u_long cmd, struct map_info *map, struct cfi_private *cfi); #define CMD(x) cfi_build_cmd((x), map, cfi) - -static inline unsigned long cfi_merge_status(map_word val, struct map_info *map, - struct cfi_private *cfi) -{ - int wordwidth, words_per_bus, chip_mode, chips_per_word; - unsigned long onestat, res = 0; - int i; - - /* We do it this way to give the compiler a fighting chance - of optimising away all the crap for 'bankwidth' larger than - an unsigned long, in the common case where that support is - disabled */ - if (map_bankwidth_is_large(map)) { - wordwidth = sizeof(unsigned long); - words_per_bus = (map_bankwidth(map)) / wordwidth; // i.e. normally 1 - } else { - wordwidth = map_bankwidth(map); - words_per_bus = 1; - } - - chip_mode = map_bankwidth(map) / cfi_interleave(cfi); - chips_per_word = wordwidth * cfi_interleave(cfi) / map_bankwidth(map); - - onestat = val.x[0]; - /* Or all status words together */ - for (i=1; i < words_per_bus; i++) { - onestat |= val.x[i]; - } - - res = onestat; - switch(chips_per_word) { - default: BUG(); -#if BITS_PER_LONG >= 64 - case 8: - res |= (onestat >> (chip_mode * 32)); -#endif - case 4: - res |= (onestat >> (chip_mode * 16)); - case 2: - res |= (onestat >> (chip_mode * 8)); - case 1: - ; - } - - /* Last, determine what the bit-pattern should be for a single - device, according to chip mode and endianness... */ - switch (chip_mode) { - case 1: - break; - case 2: - res = cfi16_to_cpu(map, res); - break; - case 4: - res = cfi32_to_cpu(map, res); - break; - default: BUG(); - } - return res; -} - +unsigned long cfi_merge_status(map_word val, struct map_info *map, + struct cfi_private *cfi); #define MERGESTATUS(x) cfi_merge_status((x), map, cfi) - -/* - * Sends a CFI command to a bank of flash for the given geometry. - * - * Returns the offset in flash where the command was written. - * If prev_val is non-null, it will be set to the value at the command address, - * before the command was written. - */ -static inline uint32_t cfi_send_gen_cmd(u_char cmd, uint32_t cmd_addr, uint32_t base, +uint32_t cfi_send_gen_cmd(u_char cmd, uint32_t cmd_addr, uint32_t base, struct map_info *map, struct cfi_private *cfi, - int type, map_word *prev_val) -{ - map_word val; - uint32_t addr = base + cfi_build_cmd_addr(cmd_addr, map, cfi); - val = cfi_build_cmd(cmd, map, cfi); - - if (prev_val) - *prev_val = map_read(map, addr); - - map_write(map, val, addr); - - return addr - base; -} + int type, map_word *prev_val); static inline uint8_t cfi_read_query(struct map_info *map, uint32_t addr) { @@ -506,15 +342,7 @@ static inline uint16_t cfi_read_query16(struct map_info *map, uint32_t addr) } } -static inline void cfi_udelay(int us) -{ - if (us >= 1000) { - msleep((us+999)/1000); - } else { - udelay(us); - cond_resched(); - } -} +void cfi_udelay(int us); int __xipram cfi_qry_present(struct map_info *map, __u32 base, struct cfi_private *cfi); -- 2.34.1