From 50f0a9df275b81096fbc0878c6deb5d99311549e Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Sat, 28 Dec 2013 08:23:30 -0300 Subject: [PATCH] [media] em28xx-i2c: cleanup I2C debug messages The I2C output messages is too polluted. Clean it a little bit, by: - use the proper core support for memory dumps; - hide most stuff under the i2c_debug umbrella; - add the missing KERN_CONT where needed; - use 2 levels or verbosity. Only the second one will show the I2C transfer data. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/usb/em28xx/em28xx-i2c.c | 84 ++++++++++++++------------- 1 file changed, 44 insertions(+), 40 deletions(-) diff --git a/drivers/media/usb/em28xx/em28xx-i2c.c b/drivers/media/usb/em28xx/em28xx-i2c.c index 76f956635bd9..e8eb83160d36 100644 --- a/drivers/media/usb/em28xx/em28xx-i2c.c +++ b/drivers/media/usb/em28xx/em28xx-i2c.c @@ -41,7 +41,7 @@ MODULE_PARM_DESC(i2c_scan, "scan i2c bus at insmod time"); static unsigned int i2c_debug; module_param(i2c_debug, int, 0644); -MODULE_PARM_DESC(i2c_debug, "enable debug messages [i2c]"); +MODULE_PARM_DESC(i2c_debug, "i2c debug message level (1: normal debug, 2: show I2C transfers)"); /* * em2800_i2c_send_bytes() @@ -89,7 +89,8 @@ static int em2800_i2c_send_bytes(struct em28xx *dev, u8 addr, u8 *buf, u16 len) } msleep(5); } - em28xx_warn("write to i2c device at 0x%x timed out\n", addr); + if (i2c_debug) + em28xx_warn("write to i2c device at 0x%x timed out\n", addr); return -ETIMEDOUT; } @@ -132,8 +133,11 @@ static int em2800_i2c_recv_bytes(struct em28xx *dev, u8 addr, u8 *buf, u16 len) } msleep(5); } - if (ret != 0x84 + len - 1) - em28xx_warn("read from i2c device at 0x%x timed out\n", addr); + if (ret != 0x84 + len - 1) { + if (i2c_debug) + em28xx_warn("read from i2c device at 0x%x timed out\n", + addr); + } /* get the received message */ ret = dev->em28xx_read_reg_req_len(dev, 0x00, 4-len, buf2, len); @@ -213,7 +217,9 @@ static int em28xx_i2c_send_bytes(struct em28xx *dev, u16 addr, u8 *buf, * (even with high payload) ... */ } - em28xx_warn("write to i2c device at 0x%x timed out (status=%i)\n", addr, ret); + if (i2c_debug) + em28xx_warn("write to i2c device at 0x%x timed out (status=%i)\n", + addr, ret); return -ETIMEDOUT; } @@ -409,10 +415,6 @@ static inline int i2c_check_for_device(struct em28xx_i2c_bus *i2c_bus, u16 addr) rc = em2800_i2c_check_for_device(dev, addr); else if (i2c_bus->algo_type == EM28XX_I2C_ALGO_EM25XX_BUS_B) rc = em25xx_bus_B_check_for_device(dev, addr); - if (rc == -ENXIO) { - if (i2c_debug) - printk(" no device\n"); - } return rc; } @@ -421,7 +423,7 @@ static inline int i2c_recv_bytes(struct em28xx_i2c_bus *i2c_bus, { struct em28xx *dev = i2c_bus->dev; u16 addr = msg.addr << 1; - int byte, rc = -EOPNOTSUPP; + int rc = -EOPNOTSUPP; if (i2c_bus->algo_type == EM28XX_I2C_ALGO_EM28XX) rc = em28xx_i2c_recv_bytes(dev, addr, msg.buf, msg.len); @@ -429,10 +431,6 @@ static inline int i2c_recv_bytes(struct em28xx_i2c_bus *i2c_bus, rc = em2800_i2c_recv_bytes(dev, addr, msg.buf, msg.len); else if (i2c_bus->algo_type == EM28XX_I2C_ALGO_EM25XX_BUS_B) rc = em25xx_bus_B_recv_bytes(dev, addr, msg.buf, msg.len); - if (i2c_debug) { - for (byte = 0; byte < msg.len; byte++) - printk(" %02x", msg.buf[byte]); - } return rc; } @@ -441,12 +439,8 @@ static inline int i2c_send_bytes(struct em28xx_i2c_bus *i2c_bus, { struct em28xx *dev = i2c_bus->dev; u16 addr = msg.addr << 1; - int byte, rc = -EOPNOTSUPP; + int rc = -EOPNOTSUPP; - if (i2c_debug) { - for (byte = 0; byte < msg.len; byte++) - printk(" %02x", msg.buf[byte]); - } if (i2c_bus->algo_type == EM28XX_I2C_ALGO_EM28XX) rc = em28xx_i2c_send_bytes(dev, addr, msg.buf, msg.len, stop); else if (i2c_bus->algo_type == EM28XX_I2C_ALGO_EM2800) @@ -491,7 +485,7 @@ static int em28xx_i2c_xfer(struct i2c_adapter *i2c_adap, } for (i = 0; i < num; i++) { addr = msgs[i].addr << 1; - if (i2c_debug) + if (i2c_debug > 1) printk(KERN_DEBUG "%s at %s: %s %s addr=%02x len=%d:", dev->name, __func__ , (msgs[i].flags & I2C_M_RD) ? "read" : "write", @@ -503,25 +497,41 @@ static int em28xx_i2c_xfer(struct i2c_adapter *i2c_adap, * This code is only called during device probe. */ rc = i2c_check_for_device(i2c_bus, addr); - if (rc == -ENXIO) { + if (rc < 0) { + if (rc == -ENXIO) { + if (i2c_debug > 1) + printk(KERN_CONT " no device\n"); + rc = -ENODEV; + } else { + if (i2c_debug > 1) + printk(KERN_CONT " ERROR: %i\n", rc); + } rt_mutex_unlock(&dev->i2c_bus_lock); - return -ENODEV; + return rc; } } else if (msgs[i].flags & I2C_M_RD) { /* read bytes */ rc = i2c_recv_bytes(i2c_bus, msgs[i]); + + if (i2c_debug > 1 && rc >= 0) + printk(KERN_CONT " %*ph", + msgs[i].len, msgs[i].buf); } else { + if (i2c_debug > 1) + printk(KERN_CONT " %*ph", + msgs[i].len, msgs[i].buf); + /* write bytes */ rc = i2c_send_bytes(i2c_bus, msgs[i], i == num - 1); } if (rc < 0) { - if (i2c_debug) - printk(" ERROR: %i\n", rc); + if (i2c_debug > 1) + printk(KERN_CONT " ERROR: %i\n", rc); rt_mutex_unlock(&dev->i2c_bus_lock); return rc; } - if (i2c_debug) - printk("\n"); + if (i2c_debug > 1) + printk(KERN_CONT "\n"); } rt_mutex_unlock(&dev->i2c_bus_lock); @@ -604,7 +614,7 @@ static int em28xx_i2c_eeprom(struct em28xx *dev, unsigned bus, * calculation and returned device dataset. Simplifies the code a lot, * but we might have to deal with multiple sizes in the future ! */ - int i, err; + int err; struct em28xx_eeprom *dev_config; u8 buf, *data; @@ -635,20 +645,14 @@ static int em28xx_i2c_eeprom(struct em28xx *dev, unsigned bus, goto error; } - /* Display eeprom content */ - for (i = 0; i < len; i++) { - if (0 == (i % 16)) { - if (dev->eeprom_addrwidth_16bit) - em28xx_info("i2c eeprom %04x:", i); - else - em28xx_info("i2c eeprom %02x:", i); - } - printk(" %02x", data[i]); - if (15 == (i % 16)) - printk("\n"); + if (i2c_debug) { + /* Display eeprom content */ + print_hex_dump(KERN_INFO, "eeprom ", DUMP_PREFIX_OFFSET, + 16, 1, data, len, true); + + if (dev->eeprom_addrwidth_16bit) + em28xx_info("eeprom %06x: ... (skipped)\n", 256); } - if (dev->eeprom_addrwidth_16bit) - em28xx_info("i2c eeprom %04x: ... (skipped)\n", i); if (dev->eeprom_addrwidth_16bit && data[0] == 0x26 && data[3] == 0x00) { -- 2.34.1