From 55fde31cae6a815a184271317abf15f468abcb44 Mon Sep 17 00:00:00 2001 From: Joel Fernandes Date: Tue, 29 Apr 2014 21:53:47 -0500 Subject: [PATCH] ARM: OMAP5: Redo THUMB mode switch on secondary CPU Here's a redo of the patch [1] that effectively does the same thing but is the right way to do things by using ENDPROC instead. The firmware correctly switches to THUMB before entry. The patch applies ontop of the earlier patch [1]. [1] https://lkml.org/lkml/2014/4/22/1044 Suggested-by: Dave Martin Cc: Dave Martin Cc: Santosh Shilimkar Cc: Russell King Cc: Nishanth Menon Cc: Tony Lindgren Signed-off-by: Joel Fernandes Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/omap-headsmp.S | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) diff --git a/arch/arm/mach-omap2/omap-headsmp.S b/arch/arm/mach-omap2/omap-headsmp.S index 40c5d5f1451c..4993d4bfe9b2 100644 --- a/arch/arm/mach-omap2/omap-headsmp.S +++ b/arch/arm/mach-omap2/omap-headsmp.S @@ -31,10 +31,6 @@ * register AuxCoreBoot0. */ ENTRY(omap5_secondary_startup) -.arm -THUMB( adr r9, BSYM(wait) ) @ CPU may be entered in ARM mode. -THUMB( bx r9 ) @ If this is a Thumb-2 kernel, -THUMB( .thumb ) @ switch to Thumb now. wait: ldr r2, =AUX_CORE_BOOT0_PA @ read from AuxCoreBoot0 ldr r0, [r2] mov r0, r0, lsr #5 @@ -43,7 +39,7 @@ wait: ldr r2, =AUX_CORE_BOOT0_PA @ read from AuxCoreBoot0 cmp r0, r4 bne wait b secondary_startup -END(omap5_secondary_startup) +ENDPROC(omap5_secondary_startup) /* * OMAP4 specific entry point for secondary CPU to jump from ROM * code. This routine also provides a holding flag into which -- 2.34.1