From 56ed5665ebde995210d4a7f7a0ba7d1d67bc82f7 Mon Sep 17 00:00:00 2001 From: Javier Martinez Canillas Date: Fri, 13 Nov 2015 01:54:14 -0300 Subject: [PATCH] ARM: dts: twl6030: Use OMAP4_IOPAD pinmux macro Use the pinmux IOPAD macros to define the register as an offset from the padconf physical address instead of the offset from padconf base. This makes the DTS easier to read since matches the addresses listed in the Technical Reference Manual. Signed-off-by: Javier Martinez Canillas Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/twl6030_omap4.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/twl6030_omap4.dtsi b/arch/arm/boot/dts/twl6030_omap4.dtsi index a4fa5703c42b..e373f59cea9c 100644 --- a/arch/arm/boot/dts/twl6030_omap4.dtsi +++ b/arch/arm/boot/dts/twl6030_omap4.dtsi @@ -24,7 +24,7 @@ &omap4_pmx_wkup { twl6030_wkup_pins: pinmux_twl6030_wkup_pins { pinctrl-single,pins = < - 0x14 (PIN_OUTPUT | MUX_MODE2) /* fref_clk0_out.sys_drm_msecure */ + OMAP4_IOPAD(0x054, PIN_OUTPUT | MUX_MODE2) /* fref_clk0_out.sys_drm_msecure */ >; }; }; @@ -32,7 +32,7 @@ &omap4_pmx_core { twl6030_pins: pinmux_twl6030_pins { pinctrl-single,pins = < - 0x15e (WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE0) /* sys_nirq1.sys_nirq1 */ + OMAP4_IOPAD(0x19e, WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE0) /* sys_nirq1.sys_nirq1 */ >; }; }; -- 2.34.1