From 5d40018623a53f5e21cb3393ab9ef2a3a7bc57dd Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Mon, 18 Aug 2014 08:51:29 -0300 Subject: [PATCH] [media] au0828: fill tuner type on all boards This is used by the I2C code in order to slow down the speed to 20 kHz on devices with xc5000 or xc5000c. So, it needs to be filled for all devices that use either xc5000 or xc5000c. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/usb/au0828/au0828-cards.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/media/usb/au0828/au0828-cards.c b/drivers/media/usb/au0828/au0828-cards.c index 9fd3c4b222f6..9eb77ac2153b 100644 --- a/drivers/media/usb/au0828/au0828-cards.c +++ b/drivers/media/usb/au0828/au0828-cards.c @@ -98,20 +98,20 @@ struct au0828_board au0828_boards[] = { }, [AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL] = { .name = "Hauppauge HVR950Q rev xxF8", - .tuner_type = UNSET, - .tuner_addr = ADDR_UNSET, + .tuner_type = TUNER_XC5000, + .tuner_addr = 0x61, .i2c_clk_divider = AU0828_I2C_CLK_250KHZ, }, [AU0828_BOARD_DVICO_FUSIONHDTV7] = { .name = "DViCO FusionHDTV USB", - .tuner_type = UNSET, - .tuner_addr = ADDR_UNSET, + .tuner_type = TUNER_XC5000, + .tuner_addr = 0x61, .i2c_clk_divider = AU0828_I2C_CLK_250KHZ, }, [AU0828_BOARD_HAUPPAUGE_WOODBURY] = { .name = "Hauppauge Woodbury", - .tuner_type = UNSET, - .tuner_addr = ADDR_UNSET, + .tuner_type = TUNER_NXP_TDA18271, + .tuner_addr = 0x60, .i2c_clk_divider = AU0828_I2C_CLK_250KHZ, }, }; -- 2.34.1