From 678565c3cb2100a8f03c23592f13f6b78e69a590 Mon Sep 17 00:00:00 2001 From: Hai Li Date: Wed, 10 Jun 2015 13:18:18 -0400 Subject: [PATCH] drm/msm/dsi: Rename *dual panel* to *dual DSI* The current term of *dual panel* in DSI driver code causes confusion. It is supposed to indicate the panel using two DSI links. Rename it to *dual DSI*. Signed-off-by: Hai Li Signed-off-by: Rob Clark --- .../devicetree/bindings/drm/msm/dsi.txt | 12 +-- drivers/gpu/drm/msm/dsi/dsi_manager.c | 84 +++++++++---------- 2 files changed, 48 insertions(+), 48 deletions(-) diff --git a/Documentation/devicetree/bindings/drm/msm/dsi.txt b/Documentation/devicetree/bindings/drm/msm/dsi.txt index cd8fe6cf536c..6ccd8608fe91 100644 --- a/Documentation/devicetree/bindings/drm/msm/dsi.txt +++ b/Documentation/devicetree/bindings/drm/msm/dsi.txt @@ -30,11 +30,11 @@ Optional properties: - panel@0: Node of panel connected to this DSI controller. See files in Documentation/devicetree/bindings/panel/ for each supported panel. -- qcom,dual-panel-mode: Boolean value indicating if the DSI controller is +- qcom,dual-dsi-mode: Boolean value indicating if the DSI controller is driving a panel which needs 2 DSI links. -- qcom,master-panel: Boolean value indicating if the DSI controller is driving +- qcom,master-dsi: Boolean value indicating if the DSI controller is driving the master link of the 2-DSI panel. -- qcom,sync-dual-panel: Boolean value indicating if the DSI controller is +- qcom,sync-dual-dsi: Boolean value indicating if the DSI controller is driving a 2-DSI panel whose 2 links need receive command simultaneously. - interrupt-parent: phandle to the MDP block if the interrupt signal is routed through MDP block @@ -90,9 +90,9 @@ Example: qcom,dsi-phy = <&mdss_dsi_phy0>; - qcom,dual-panel-mode; - qcom,master-panel; - qcom,sync-dual-panel; + qcom,dual-dsi-mode; + qcom,master-dsi; + qcom,sync-dual-dsi; panel: panel@0 { compatible = "sharp,lq101r1sx01"; diff --git a/drivers/gpu/drm/msm/dsi/dsi_manager.c b/drivers/gpu/drm/msm/dsi/dsi_manager.c index cfa632fc1cbe..bd247b7dbc44 100644 --- a/drivers/gpu/drm/msm/dsi/dsi_manager.c +++ b/drivers/gpu/drm/msm/dsi/dsi_manager.c @@ -29,16 +29,16 @@ struct msm_dsi_manager { struct msm_dsi *dsi[DSI_MAX]; - bool is_dual_panel; + bool is_dual_dsi; bool is_sync_needed; - int master_panel_id; + int master_dsi_link_id; }; static struct msm_dsi_manager msm_dsim_glb; -#define IS_DUAL_PANEL() (msm_dsim_glb.is_dual_panel) +#define IS_DUAL_DSI() (msm_dsim_glb.is_dual_dsi) #define IS_SYNC_NEEDED() (msm_dsim_glb.is_sync_needed) -#define IS_MASTER_PANEL(id) (msm_dsim_glb.master_panel_id == id) +#define IS_MASTER_DSI_LINK(id) (msm_dsim_glb.master_dsi_link_id == id) static inline struct msm_dsi *dsi_mgr_get_dsi(int id) { @@ -50,23 +50,23 @@ static inline struct msm_dsi *dsi_mgr_get_other_dsi(int id) return msm_dsim_glb.dsi[(id + 1) % DSI_MAX]; } -static int dsi_mgr_parse_dual_panel(struct device_node *np, int id) +static int dsi_mgr_parse_dual_dsi(struct device_node *np, int id) { struct msm_dsi_manager *msm_dsim = &msm_dsim_glb; - /* We assume 2 dsi nodes have the same information of dual-panel and + /* We assume 2 dsi nodes have the same information of dual-dsi and * sync-mode, and only one node specifies master in case of dual mode. */ - if (!msm_dsim->is_dual_panel) - msm_dsim->is_dual_panel = of_property_read_bool( - np, "qcom,dual-panel-mode"); + if (!msm_dsim->is_dual_dsi) + msm_dsim->is_dual_dsi = of_property_read_bool( + np, "qcom,dual-dsi-mode"); - if (msm_dsim->is_dual_panel) { - if (of_property_read_bool(np, "qcom,master-panel")) - msm_dsim->master_panel_id = id; + if (msm_dsim->is_dual_dsi) { + if (of_property_read_bool(np, "qcom,master-dsi")) + msm_dsim->master_dsi_link_id = id; if (!msm_dsim->is_sync_needed) msm_dsim->is_sync_needed = of_property_read_bool( - np, "qcom,sync-dual-panel"); + np, "qcom,sync-dual-dsi"); } return 0; @@ -80,7 +80,7 @@ static int dsi_mgr_host_register(int id) struct msm_dsi_pll *src_pll; int ret; - if (!IS_DUAL_PANEL()) { + if (!IS_DUAL_DSI()) { ret = msm_dsi_host_register(msm_dsi->host, true); if (ret) return ret; @@ -90,9 +90,9 @@ static int dsi_mgr_host_register(int id) } else if (!other_dsi) { ret = 0; } else { - struct msm_dsi *mdsi = IS_MASTER_PANEL(id) ? + struct msm_dsi *mdsi = IS_MASTER_DSI_LINK(id) ? msm_dsi : other_dsi; - struct msm_dsi *sdsi = IS_MASTER_PANEL(id) ? + struct msm_dsi *sdsi = IS_MASTER_DSI_LINK(id) ? other_dsi : msm_dsi; /* Register slave host first, so that slave DSI device * has a chance to probe, and do not block the master @@ -159,23 +159,23 @@ static enum drm_connector_status dsi_mgr_connector_detect( &msm_dsi->panel_flags); /* There is only 1 panel in the global panel list - * for dual panel mode. Therefore slave dsi should get + * for dual DSI mode. Therefore slave dsi should get * the drm_panel instance from master dsi, and * keep using the panel flags got from the current DSI link. */ - if (!msm_dsi->panel && IS_DUAL_PANEL() && - !IS_MASTER_PANEL(id) && other_dsi) + if (!msm_dsi->panel && IS_DUAL_DSI() && + !IS_MASTER_DSI_LINK(id) && other_dsi) msm_dsi->panel = msm_dsi_host_get_panel( other_dsi->host, NULL); - if (msm_dsi->panel && IS_DUAL_PANEL()) + if (msm_dsi->panel && IS_DUAL_DSI()) drm_object_attach_property(&connector->base, connector->dev->mode_config.tile_property, 0); - /* Set split display info to kms once dual panel is connected - * to both hosts + /* Set split display info to kms once dual DSI panel is + * connected to both hosts. */ - if (msm_dsi->panel && IS_DUAL_PANEL() && + if (msm_dsi->panel && IS_DUAL_DSI() && other_dsi && other_dsi->panel) { bool cmd_mode = !(msm_dsi->panel_flags & MIPI_DSI_MODE_VIDEO); @@ -188,7 +188,7 @@ static enum drm_connector_status dsi_mgr_connector_detect( kms->funcs->set_split_display(kms, encoder, slave_enc, cmd_mode); else - pr_err("mdp does not support dual panel\n"); + pr_err("mdp does not support dual DSI\n"); } } @@ -285,7 +285,7 @@ static int dsi_mgr_connector_get_modes(struct drm_connector *connector) if (!num) return 0; - if (IS_DUAL_PANEL()) { + if (IS_DUAL_DSI()) { /* report half resolution to user */ dsi_dual_connector_fix_modes(connector); ret = dsi_dual_connector_tile_init(connector, id); @@ -340,11 +340,11 @@ static void dsi_mgr_bridge_pre_enable(struct drm_bridge *bridge) struct msm_dsi *msm_dsi1 = dsi_mgr_get_dsi(DSI_1); struct mipi_dsi_host *host = msm_dsi->host; struct drm_panel *panel = msm_dsi->panel; - bool is_dual_panel = IS_DUAL_PANEL(); + bool is_dual_dsi = IS_DUAL_DSI(); int ret; DBG("id=%d", id); - if (!panel || (is_dual_panel && (DSI_1 == id))) + if (!panel || (is_dual_dsi && (DSI_1 == id))) return; ret = msm_dsi_host_power_on(host); @@ -353,7 +353,7 @@ static void dsi_mgr_bridge_pre_enable(struct drm_bridge *bridge) goto host_on_fail; } - if (is_dual_panel && msm_dsi1) { + if (is_dual_dsi && msm_dsi1) { ret = msm_dsi_host_power_on(msm_dsi1->host); if (ret) { pr_err("%s: power on host1 failed, %d\n", @@ -377,7 +377,7 @@ static void dsi_mgr_bridge_pre_enable(struct drm_bridge *bridge) goto host_en_fail; } - if (is_dual_panel && msm_dsi1) { + if (is_dual_dsi && msm_dsi1) { ret = msm_dsi_host_enable(msm_dsi1->host); if (ret) { pr_err("%s: enable host1 failed, %d\n", __func__, ret); @@ -394,14 +394,14 @@ static void dsi_mgr_bridge_pre_enable(struct drm_bridge *bridge) return; panel_en_fail: - if (is_dual_panel && msm_dsi1) + if (is_dual_dsi && msm_dsi1) msm_dsi_host_disable(msm_dsi1->host); host1_en_fail: msm_dsi_host_disable(host); host_en_fail: drm_panel_unprepare(panel); panel_prep_fail: - if (is_dual_panel && msm_dsi1) + if (is_dual_dsi && msm_dsi1) msm_dsi_host_power_off(msm_dsi1->host); host1_on_fail: msm_dsi_host_power_off(host); @@ -426,12 +426,12 @@ static void dsi_mgr_bridge_post_disable(struct drm_bridge *bridge) struct msm_dsi *msm_dsi1 = dsi_mgr_get_dsi(DSI_1); struct mipi_dsi_host *host = msm_dsi->host; struct drm_panel *panel = msm_dsi->panel; - bool is_dual_panel = IS_DUAL_PANEL(); + bool is_dual_dsi = IS_DUAL_DSI(); int ret; DBG("id=%d", id); - if (!panel || (is_dual_panel && (DSI_1 == id))) + if (!panel || (is_dual_dsi && (DSI_1 == id))) return; ret = drm_panel_disable(panel); @@ -442,7 +442,7 @@ static void dsi_mgr_bridge_post_disable(struct drm_bridge *bridge) if (ret) pr_err("%s: host %d disable failed, %d\n", __func__, id, ret); - if (is_dual_panel && msm_dsi1) { + if (is_dual_dsi && msm_dsi1) { ret = msm_dsi_host_disable(msm_dsi1->host); if (ret) pr_err("%s: host1 disable failed, %d\n", __func__, ret); @@ -456,7 +456,7 @@ static void dsi_mgr_bridge_post_disable(struct drm_bridge *bridge) if (ret) pr_err("%s: host %d power off failed,%d\n", __func__, id, ret); - if (is_dual_panel && msm_dsi1) { + if (is_dual_dsi && msm_dsi1) { ret = msm_dsi_host_power_off(msm_dsi1->host); if (ret) pr_err("%s: host1 power off failed, %d\n", @@ -472,7 +472,7 @@ static void dsi_mgr_bridge_mode_set(struct drm_bridge *bridge, struct msm_dsi *msm_dsi = dsi_mgr_get_dsi(id); struct msm_dsi *other_dsi = dsi_mgr_get_other_dsi(id); struct mipi_dsi_host *host = msm_dsi->host; - bool is_dual_panel = IS_DUAL_PANEL(); + bool is_dual_dsi = IS_DUAL_DSI(); DBG("set mode: %d:\"%s\" %d %d %d %d %d %d %d %d %d %d 0x%x 0x%x", mode->base.id, mode->name, @@ -483,11 +483,11 @@ static void dsi_mgr_bridge_mode_set(struct drm_bridge *bridge, mode->vsync_end, mode->vtotal, mode->type, mode->flags); - if (is_dual_panel && (DSI_1 == id)) + if (is_dual_dsi && (DSI_1 == id)) return; msm_dsi_host_set_display_mode(host, adjusted_mode); - if (is_dual_panel && other_dsi) + if (is_dual_dsi && other_dsi) msm_dsi_host_set_display_mode(other_dsi->host, adjusted_mode); } @@ -610,7 +610,7 @@ int msm_dsi_manager_phy_enable(int id, { struct msm_dsi *msm_dsi = dsi_mgr_get_dsi(id); struct msm_dsi_phy *phy = msm_dsi->phy; - int src_pll_id = IS_DUAL_PANEL() ? DSI_CLOCK_MASTER : id; + int src_pll_id = IS_DUAL_DSI() ? DSI_CLOCK_MASTER : id; int ret; ret = msm_dsi_phy_enable(phy, src_pll_id, bit_rate, esc_rate); @@ -635,7 +635,7 @@ void msm_dsi_manager_phy_disable(int id) * first controller only when the second controller is disabled. */ msm_dsi->phy_enabled = false; - if (IS_DUAL_PANEL() && mdsi && sdsi) { + if (IS_DUAL_DSI() && mdsi && sdsi) { if (!mdsi->phy_enabled && !sdsi->phy_enabled) { msm_dsi_phy_disable(sdsi->phy); msm_dsi_phy_disable(mdsi->phy); @@ -726,9 +726,9 @@ int msm_dsi_manager_register(struct msm_dsi *msm_dsi) msm_dsim->dsi[id] = msm_dsi; - ret = dsi_mgr_parse_dual_panel(msm_dsi->pdev->dev.of_node, id); + ret = dsi_mgr_parse_dual_dsi(msm_dsi->pdev->dev.of_node, id); if (ret) { - pr_err("%s: failed to parse dual panel info\n", __func__); + pr_err("%s: failed to parse dual DSI info\n", __func__); goto fail; } -- 2.34.1