From 6c482fd15d4ff211ce0e63a628cbda17201b33a0 Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Tue, 12 Jan 2016 15:55:12 +0100 Subject: [PATCH] ARM: dts: at91: sama5d2 xplained: add phy address and IRQ for macb0 After 57a38effa598 (net: phy: micrel: disable broadcast for KSZ8081/KSZ8091) the macb0 interface has difficulties to come back from power saving mode if address not explicitly set up. As the micrel phy on the board is actually configured to show up at address 1 we use this explicitly. Adding the phy node and its real address fixes the issue. The phy IRQ and associated pinmux node is also added. Signed-off-by: Nicolas Ferre Acked-by: Alexandre Belloni Cc: stable@vger.kernel.org # 4.4+ // manual merge needed --- arch/arm/boot/dts/at91-sama5d2_xplained.dts | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts index 77ddff036409..e683856c507c 100644 --- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts @@ -114,9 +114,15 @@ macb0: ethernet@f8008000 { pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_macb0_default>; + pinctrl-0 = <&pinctrl_macb0_default &pinctrl_macb0_phy_irq>; phy-mode = "rmii"; status = "okay"; + + ethernet-phy@1 { + reg = <0x1>; + interrupt-parent = <&pioA>; + interrupts = <73 IRQ_TYPE_LEVEL_LOW>; + }; }; pdmic@f8018000 { @@ -300,6 +306,10 @@ bias-disable; }; + pinctrl_macb0_phy_irq: macb0_phy_irq { + pinmux = ; + }; + pinctrl_pdmic_default: pdmic_default { pinmux = , ; -- 2.34.1