From 6df07e7f7e7a5e01a9c17b439334f99f51723af6 Mon Sep 17 00:00:00 2001 From: David Edelsohn Date: Mon, 22 Jan 1996 17:53:34 +0000 Subject: [PATCH] * config/tc-sparc.h (TARGET_FORMAT): Use #ifdef SPARC_ARCH64 instead of #ifdef sparcv9 when choosing value. (ENV64): Delete. (md_end): Define. (sparc_md_end): Declare. * config/tc-sparc.c (SPARC_V9): Renamed from sparcv9. (initial_architecture): New static local. (can_bump_v9_p): Likewise. (NO_V9): Delete all occurrences. (sparc_md_end): New function. (sparc_ip): New local v9_arg_p. Rework fp reg number test. Don't bump architecture to v9 unless can_bump_v9_p set. (md_parse_option): -A passed, set can_bump_v9_p accordingly. * configure.in (sparc64 target cpu): Don't set obj_format here. (SPARC_V9): Renamed from sparcv9. (sparc64-*-elf*): Define SPARC_ARCH64. * configure: Regenerated. * acconfig.h (SPARC_V9): Renamed from sparcv9. (SPARC_ARCH64): Add. * config/vmsconf.h: Update. --- gas/ChangeLog | 23 +++ gas/acconfig.h | 5 +- gas/config/tc-sparc.c | 366 +++++++++++++++++++++++------------------- gas/config/vms-conf.h | 3 +- gas/configure | 51 +++--- gas/configure.in | 14 +- 6 files changed, 267 insertions(+), 195 deletions(-) diff --git a/gas/ChangeLog b/gas/ChangeLog index c24871e576..12315d244f 100644 --- a/gas/ChangeLog +++ b/gas/ChangeLog @@ -1,3 +1,26 @@ +Mon Jan 22 09:21:36 1996 Doug Evans + + * config/tc-sparc.h (TARGET_FORMAT): Use #ifdef SPARC_ARCH64 instead of + #ifdef sparcv9 when choosing value. + (ENV64): Delete. + (md_end): Define. + (sparc_md_end): Declare. + * config/tc-sparc.c (SPARC_V9): Renamed from sparcv9. + (initial_architecture): New static local. + (can_bump_v9_p): Likewise. + (NO_V9): Delete all occurrences. + (sparc_md_end): New function. + (sparc_ip): New local v9_arg_p. Rework fp reg number test. + Don't bump architecture to v9 unless can_bump_v9_p set. + (md_parse_option): -A passed, set can_bump_v9_p accordingly. + * configure.in (sparc64 target cpu): Don't set obj_format here. + (SPARC_V9): Renamed from sparcv9. + (sparc64-*-elf*): Define SPARC_ARCH64. + * configure: Regenerated. + * acconfig.h (SPARC_V9): Renamed from sparcv9. + (SPARC_ARCH64): Add. + * config/vmsconf.h: Update. + Mon Jan 22 17:24:47 1996 James G. Smith * config/tc-mips.c (load_register): Optimise "dli" loads. diff --git a/gas/acconfig.h b/gas/acconfig.h index 57fdd83e5b..1626d38b5d 100644 --- a/gas/acconfig.h +++ b/gas/acconfig.h @@ -28,8 +28,9 @@ #undef MANY_SEGMENTS -/* Needed only for sparc configuration */ -#undef sparcv9 +/* Needed only for sparc configuration. */ +#undef SPARC_V9 +#undef SPARC_ARCH64 /* Needed only for some configurations that can produce multiple output formats. */ diff --git a/gas/config/tc-sparc.c b/gas/config/tc-sparc.c index 2ed4267f85..d2aebdf439 100644 --- a/gas/config/tc-sparc.c +++ b/gas/config/tc-sparc.c @@ -1,5 +1,5 @@ /* tc-sparc.c -- Assemble for the SPARC - Copyright (C) 1989, 90, 91, 92, 93, 94, 1995 Free Software Foundation, Inc. + Copyright (C) 1989, 90-95, 1996 Free Software Foundation, Inc. This file is part of GAS, the GNU Assembler. @@ -28,11 +28,25 @@ static void sparc_ip PARAMS ((char *)); -#ifdef sparcv9 -static enum sparc_architecture current_architecture = v9; +#ifdef SPARC_V9 +/* In a 32 bit environment, don't bump up to v9 unless necessary. */ +#ifdef SPARC_ARCH64 +static enum sparc_architecture initial_architecture = v9; #else -static enum sparc_architecture current_architecture = v6; +static enum sparc_architecture initial_architecture = v6; #endif +#else +static enum sparc_architecture initial_architecture = v6; +#endif + +/* If sparc64 was the configured cpu, allow bumping up to v9 by default. */ +#ifdef SPARC_V9 +static int can_bump_v9_p = 1; +#else +static int can_bump_v9_p = 0; +#endif + +static enum sparc_architecture current_architecture; static int architecture_requested; static int warn_on_bump; @@ -62,12 +76,10 @@ const pseudo_typeS md_pseudo_table[] = {"seg", s_seg, 0}, {"skip", s_space, 0}, {"word", cons, 4}, -#ifndef NO_V9 {"xword", cons, 8}, #ifdef OBJ_ELF {"uaxword", cons, 8}, #endif -#endif #ifdef OBJ_ELF /* these are specific to sparc/svr4 */ {"pushsection", obj_elf_section, 0}, @@ -502,7 +514,7 @@ s_proc (ignore) ++input_line_pointer; } -#ifndef NO_V9 +/* sparc64 priviledged registers */ struct priv_reg_entry { @@ -532,26 +544,6 @@ struct priv_reg_entry priv_reg_table[] = {"", -1}, /* end marker */ }; -struct membar_masks -{ - char *name; - unsigned int len; - unsigned int mask; -}; - -#define MEMBAR_MASKS_SIZE 7 - -static const struct membar_masks membar_masks[MEMBAR_MASKS_SIZE] = -{ - {"Sync", 4, 0x40}, - {"MemIssue", 8, 0x20}, - {"Lookaside", 9, 0x10}, - {"StoreStore", 10, 0x08}, - {"LoadStore", 9, 0x04}, - {"StoreLoad", 9, 0x02}, - {"LoadLoad", 8, 0x01}, -}; - static int cmp_reg_entry (p, q) struct priv_reg_entry *p, *q; @@ -559,10 +551,9 @@ cmp_reg_entry (p, q) return strcmp (q->name, p->name); } -#endif - /* This function is called once, at assembler startup time. It should set up all the tables, etc. that the MD part of the assembler will need. */ + void md_begin () { @@ -608,12 +599,42 @@ md_begin () for (i = 'A'; i <= 'F'; ++i) toHex[i] = i + 10 - 'A'; -#ifndef NO_V9 qsort (priv_reg_table, sizeof (priv_reg_table) / sizeof (priv_reg_table[0]), sizeof (priv_reg_table[0]), cmp_reg_entry); -#endif target_big_endian = 1; + current_architecture = initial_architecture; +} + +/* Called after all assembly has been done. */ + +void +sparc_md_end () +{ + /* If we bumped up in architecture, we need to change bfd's mach number. */ + /* ??? We could delete this test, I think. */ + if (current_architecture != initial_architecture) + { +#ifdef BFD64 + if (current_architecture < v9) + abort (); + else if (current_architecture == v9) + bfd_set_arch_mach (stdoutput, bfd_arch_sparc, bfd_mach_sparc_v9); + else if (current_architecture == v9a) + bfd_set_arch_mach (stdoutput, bfd_arch_sparc, bfd_mach_sparc_v9a); + else + abort (); +#else + if (current_architecture < v9) + bfd_set_arch_mach (stdoutput, bfd_arch_sparc, bfd_mach_sparc); + else if (current_architecture == v9) + bfd_set_arch_mach (stdoutput, bfd_arch_sparc, bfd_mach_sparc_v8plus); + else if (current_architecture == v9a) + bfd_set_arch_mach (stdoutput, bfd_arch_sparc, bfd_mach_sparc_v8plusa); + else + abort (); +#endif + } } void @@ -710,6 +731,67 @@ BSR (val, amount) return val >> amount; } +/* Parse an argument that can be expressed as a keyword. + (eg: #StoreStore). + The result is a boolean indicating success. + If successful, INPUT_POINTER is updated. */ + +static int +parse_keyword_arg (lookup_fn, input_pointerP, valueP) + int (*lookup_fn) (); + char **input_pointerP; + int *valueP; +{ + int value; + char c, *p, *q; + + p = *input_pointerP; + for (q = p + (*p == '#'); isalpha (*q) || *q == '_'; ++q) + continue; + c = *q; + *q = 0; + value = (*lookup_fn) (p); + *q = c; + if (value == -1) + return 0; + *valueP = value; + *input_pointerP = q; + return 1; +} + +/* Parse an argument that is a constant expression. + The result is a boolean indicating success. */ + +static int +parse_const_expr_arg (input_pointerP, valueP) + char **input_pointerP; + int *valueP; +{ + char *save = input_line_pointer; + expressionS exp; + + input_line_pointer = *input_pointerP; + /* The next expression may be something other than a constant + (say if we're not processing the right variant of the insn). + Don't call expression unless we're sure it will succeed as it will + signal an error (which we want to defer until later). */ + /* FIXME: It might be better to define md_operand and have it recognize + things like %asi, etc. but continuing that route through to the end + is a lot of work. */ + if (*input_line_pointer == '%') + { + input_line_pointer = save; + return 0; + } + expression (&exp); + *input_pointerP = input_line_pointer; + input_line_pointer = save; + if (exp.X_op != O_constant) + return 0; + *valueP = exp.X_add_number; + return 1; +} + static void sparc_ip (str) char *str; @@ -725,12 +807,13 @@ sparc_ip (str) int match = 0; int comma = 0; long immediate_max = 0; + int v9_arg_p; for (s = str; islower (*s) || (*s >= '0' && *s <= '3'); ++s) ; + switch (*s) { - case '\0': break; @@ -756,12 +839,14 @@ sparc_ip (str) { *--s = ','; } + argsStart = s; for (;;) { opcode = insn->match; memset (&the_insn, '\0', sizeof (the_insn)); the_insn.reloc = BFD_RELOC_NONE; + v9_arg_p = 0; /* * Build the opcode, checking as we go to make @@ -771,114 +856,81 @@ sparc_ip (str) { switch (*args) { -#ifndef NO_V9 case 'K': { int kmask = 0; - int i; /* Parse a series of masks. */ if (*s == '#') { while (*s == '#') { - ++s; - for (i = 0; i < MEMBAR_MASKS_SIZE; i++) - if (!strncmp (s, membar_masks[i].name, - membar_masks[i].len)) - break; - if (i < MEMBAR_MASKS_SIZE) - { - kmask |= membar_masks[i].mask; - s += membar_masks[i].len; - } - else + int mask; + + if (! parse_keyword_arg (sparc_encode_membar, &s, + &mask)) { error_message = ": invalid membar mask name"; goto error; } - if (*s == '|') + kmask |= mask; + while (*s == ' ') { ++s; continue; } + if (*s == '|' || *s == '+') ++s; + while (*s == ' ') { ++s; continue; } } } else { - expressionS exp; - char *hold; - char *send; - - hold = input_line_pointer; - input_line_pointer = s; - expression (&exp); - send = input_line_pointer; - input_line_pointer = hold; - - kmask = exp.X_add_number; - if (exp.X_op != O_constant - || kmask < 0 - || kmask > 127) + if (! parse_const_expr_arg (&s, &kmask)) + { + error_message = ": invalid membar mask expression"; + goto error; + } + if (kmask < 0 || kmask > 127) { error_message = ": invalid membar mask number"; goto error; } - - s = send; } - opcode |= SIMM13 (kmask); + opcode |= MEMBAR (kmask); continue; } case '*': { - int prefetch_fcn = 0; + int fcn = 0; /* Parse a prefetch function. */ if (*s == '#') { - s += 1; - if (!strncmp (s, "n_reads", 7)) - prefetch_fcn = 0, s += 7; - else if (!strncmp (s, "one_read", 8)) - prefetch_fcn = 1, s += 8; - else if (!strncmp (s, "n_writes", 8)) - prefetch_fcn = 2, s += 8; - else if (!strncmp (s, "one_write", 9)) - prefetch_fcn = 3, s += 9; - else if (!strncmp (s, "page", 4)) - prefetch_fcn = 4, s += 4; - else + if (! parse_keyword_arg (sparc_encode_prefetch, &s, &fcn)) { error_message = ": invalid prefetch function name"; goto error; } } - else if (isdigit (*s)) + else { - while (isdigit (*s)) + if (! parse_const_expr_arg (&s, &fcn)) { - prefetch_fcn = prefetch_fcn * 10 + *s - '0'; - ++s; + error_message = ": invalid prefetch function expression"; + goto error; } - - if (prefetch_fcn < 0 || prefetch_fcn > 31) + if (fcn < 0 || fcn > 31) { error_message = ": invalid prefetch function number"; goto error; } } - else - { - error_message = ": unrecognizable prefetch function"; - goto error; - } - opcode |= RD (prefetch_fcn); + opcode |= RD (fcn); continue; } case '!': case '?': - /* Parse a privileged register. */ + /* Parse a sparc64 privileged register. */ if (*s == '%') { struct priv_reg_entry *p = priv_reg_table; @@ -911,7 +963,6 @@ sparc_ip (str) error_message = ": unrecognizable privileged register"; goto error; } -#endif case 'M': case 'm': @@ -947,7 +998,6 @@ sparc_ip (str) } /* if %asr */ break; -#ifndef NO_V9 case 'I': the_insn.reloc = BFD_RELOC_SPARC_11; immediate_max = 0x03FF; @@ -1071,7 +1121,6 @@ sparc_ip (str) continue; } break; -#endif /* NO_V9 */ case '\0': /* end of args */ if (*s == '\0') @@ -1245,10 +1294,9 @@ sparc_ip (str) default: goto error; } - /* - * Got the register, now figure out where - * it goes in the opcode. - */ + + /* Got the register, now figure out where + it goes in the opcode. */ switch (*args) { @@ -1310,23 +1358,27 @@ sparc_ip (str) break; } /* register must be multiple of 4 */ -#ifndef NO_V9 if (mask >= 64) { - error_message = ": There are only 64 f registers; [0-63]"; + if (can_bump_v9_p) + error_message = ": There are only 64 f registers; [0-63]"; + else + error_message = ": There are only 32 f registers; [0-31]"; goto error; } /* on error */ - if (mask >= 32) - { - mask -= 31; - } /* wrap high bit */ -#else - if (mask >= 32) + else if (mask >= 32) { - error_message = ": There are only 32 f registers; [0-31]"; - goto error; - } /* on error */ -#endif + if (can_bump_v9_p) + { + v9_arg_p = 1; + mask -= 31; /* wrap high bit */ + } + else + { + error_message = ": There are only 32 f registers; [0-31]"; + goto error; + } + } } else { @@ -1335,7 +1387,6 @@ sparc_ip (str) switch (*args) { - case 'v': case 'V': case 'e': @@ -1407,13 +1458,13 @@ sparc_ip (str) the_insn.reloc = BFD_RELOC_LO10; s += 3; } -#ifndef NO_V9 else if (c == 'u' && s[2] == 'h' && s[3] == 'i') { the_insn.reloc = BFD_RELOC_SPARC_HH22; s += 4; + v9_arg_p = 1; } else if (c == 'u' && s[2] == 'l' @@ -1421,8 +1472,8 @@ sparc_ip (str) { the_insn.reloc = BFD_RELOC_SPARC_HM10; s += 4; + v9_arg_p = 1; } -#endif /* NO_V9 */ else break; } @@ -1469,7 +1520,6 @@ sparc_ip (str) && the_insn.exp.X_add_symbol == 0 && the_insn.exp.X_op_symbol == 0) { -#ifndef NO_V9 /* Handle %uhi/%ulo by moving the upper word to the lower one and pretending it's %hi/%lo. We also need to watch for %hi/%lo: the top word needs to be zeroed otherwise @@ -1484,14 +1534,14 @@ sparc_ip (str) the_insn.reloc = BFD_RELOC_LO10; the_insn.exp.X_add_number = BSR (the_insn.exp.X_add_number, 32); break; - default: - break; case BFD_RELOC_HI22: case BFD_RELOC_LO10: the_insn.exp.X_add_number &= 0xffffffff; break; + default: + break; } -#endif + /* For pc-relative call instructions, we reject constants to get better code. */ if (the_insn.pcrel @@ -1548,40 +1598,22 @@ sparc_ip (str) /* Parse an asi. */ if (*s == '#') { - char c, *p; - - for (p = s + 1; isalpha (*p) || *p == '_'; ++p) - continue; - c = *p; - *p = 0; - asi = sparc_encode_asi (s); - *p = c; - if (asi == -1) + if (! parse_keyword_arg (sparc_encode_asi, &s, &asi)) { - error_message = ": invalid asi name"; + error_message = ": invalid ASI name"; goto error; } - s = p; } else { - char *push = input_line_pointer; - expressionS e; - input_line_pointer = s; - - expression (&e); - if (e.X_op != O_constant) + if (! parse_const_expr_arg (&s, &asi)) { - error_message = ": constant required for ASI"; + error_message = ": invalid ASI expression"; goto error; } - asi = e.X_add_number; - s = input_line_pointer; - input_line_pointer = push; - if (asi < 0 || asi > 255) { - error_message = ": invalid asi number"; + error_message = ": invalid ASI number"; goto error; } } @@ -1626,7 +1658,6 @@ sparc_ip (str) } break; -#ifndef NO_V9 case 'o': if (strncmp (s, "%asi", 4) != 0) break; @@ -1644,7 +1675,6 @@ sparc_ip (str) break; s += 4; continue; -#endif /* NO_V9 */ case 't': if (strncmp (s, "%tbr", 4) != 0) @@ -1658,7 +1688,6 @@ sparc_ip (str) s += 4; continue; -#ifndef NO_V9 case 'x': { char *push = input_line_pointer; @@ -1680,7 +1709,6 @@ sparc_ip (str) input_line_pointer = push; continue; } -#endif case 'y': if (strncmp (s, "%y", 2) != 0) @@ -1691,8 +1719,11 @@ sparc_ip (str) default: as_fatal ("failed sanity check."); } /* switch on arg code */ + + /* Break out of for() loop. */ break; } /* for each arg that we expect */ + error: if (match == 0) { @@ -1715,29 +1746,36 @@ sparc_ip (str) { if (insn->architecture > current_architecture || (insn->architecture != current_architecture - && current_architecture > v8)) + && current_architecture > v8) + || (v9_arg_p && current_architecture < v9)) { + enum sparc_architecture needed_architecture = + ((v9_arg_p && insn->architecture < v9) + ? v9 : insn->architecture); + if ((!architecture_requested || warn_on_bump) && !ARCHITECTURES_CONFLICT_P (current_architecture, - insn->architecture) - && !ARCHITECTURES_CONFLICT_P (insn->architecture, - current_architecture)) + needed_architecture) + && !ARCHITECTURES_CONFLICT_P (needed_architecture, + current_architecture) + && (needed_architecture < v9 || can_bump_v9_p)) { if (warn_on_bump) { as_warn ("architecture bumped from \"%s\" to \"%s\" on \"%s\"", architecture_pname[current_architecture], - architecture_pname[insn->architecture], + architecture_pname[needed_architecture], str); } /* if warning */ - current_architecture = insn->architecture; + if (needed_architecture > current_architecture) + current_architecture = needed_architecture; } else { as_bad ("Architecture mismatch on \"%s\".", str); as_tsktsk (" (Requires %s; current architecture is %s.)", - architecture_pname[insn->architecture], + architecture_pname[needed_architecture], architecture_pname[current_architecture]); return; } /* if bump ok else error */ @@ -1947,7 +1985,6 @@ md_apply_fix (fixP, value) buf[3] = val; break; -#ifndef NO_V9 case BFD_RELOC_64: { bfd_vma valh = BSR (val, 32); @@ -2013,11 +2050,8 @@ md_apply_fix (fixP, value) case BFD_RELOC_SPARC_HH22: val = BSR (val, 32); /* intentional fallthrough */ -#endif /* NO_V9 */ -#ifndef NO_V9 case BFD_RELOC_SPARC_LM22: -#endif case BFD_RELOC_HI22: if (!fixP->fx_addsy) { @@ -2042,11 +2076,9 @@ md_apply_fix (fixP, value) buf[3] = val & 0xff; break; -#ifndef NO_V9 case BFD_RELOC_SPARC_HM10: val = BSR (val, 32); /* intentional fallthrough */ -#endif /* NO_V9 */ case BFD_RELOC_LO10: if (!fixP->fx_addsy) @@ -2280,7 +2312,9 @@ print_insn (insn) * supported by the selected architecture cause fatal errors. * * The default is to start at v6, and bump the architecture up - * whenever an instruction is seen at a higher level. + * whenever an instruction is seen at a higher level. If sparc64 + * was not the target cpu, v9 is not bumped up to, the user must + * pass -Av9. * * If -bump is specified, a warning is printing when bumping to * higher levels. @@ -2289,7 +2323,7 @@ print_insn (insn) * that architecture. Any higher level instructions are flagged * as errors. * - * if both an architecture and -bump are specified, the + * If both an architecture and -bump are specified, the * architecture starts at the specified level, but bumps are * warnings. * @@ -2346,15 +2380,17 @@ md_parse_option (c, arg) else { enum sparc_architecture new_arch = arch - architecture_pname; -#ifdef NO_V9 - if (new_arch == v9) - { - as_error ("v9 support not compiled in"); - return 0; - } -#endif - current_architecture = new_arch; + + initial_architecture = new_arch; architecture_requested = 1; + + /* ??? May wish an option to explicitly set `can_bump_v9_p'. */ + /* Set `can_bump_v9_p' if v9: we assume that if the current + architecture is v9, it's set. */ + if (new_arch >= v9) + can_bump_v9_p = 1; + else + can_bump_v9_p = 0; } } break; diff --git a/gas/config/vms-conf.h b/gas/config/vms-conf.h index 3c5b743320..c948d1a033 100644 --- a/gas/config/vms-conf.h +++ b/gas/config/vms-conf.h @@ -66,7 +66,8 @@ #undef MANY_SEGMENTS /* Needed only for sparc configuration */ -#undef sparcv9 +#undef SPARC_V9 +#undef SPARC_ARCH64 /* Define if you have the remove function. */ #define HAVE_REMOVE diff --git a/gas/configure b/gas/configure index c092ceecc2..34cb0dae2e 100755 --- a/gas/configure +++ b/gas/configure @@ -686,9 +686,9 @@ case ${target_cpu} in powerpcle*) cpu_type=ppc endian=little ;; powerpc*) cpu_type=ppc endian=big ;; rs6000*) cpu_type=ppc ;; - sparc64) cpu_type=sparc obj_format=elf + sparc64) cpu_type=sparc cat >> confdefs.h <<\EOF -#define sparcv9 1 +#define SPARC_V9 1 EOF ;; sparclite*) cpu_type=sparc ;; @@ -753,7 +753,7 @@ for this_target in $target $canon_targets ; do powerpcle*) cpu_type=ppc endian=little ;; powerpc*) cpu_type=ppc endian=big ;; rs6000*) cpu_type=ppc ;; - sparc64) cpu_type=sparc obj_format=elf want_sparcv9=true ;; + sparc64) cpu_type=sparc want_sparc_v9=true ;; sparclite*) cpu_type=sparc ;; *) cpu_type=${cpu} ;; esac @@ -946,7 +946,7 @@ for this_target in $target $canon_targets ; do *-*-xray | *-*-hms) fmt=coff ;; *-*-sim) fmt=coff ;; *-*-elf | *-*-sysv4* | *-*-solaris*) - echo "configure: warning: GAS support for ELF format is incomplete." 1>&2 + echo "configure: warning: GAS support for ${generic_target} is incomplete." 1>&2 fmt=elf dev=yes ;; *-*-vxworks) fmt=aout ;; *-*-netware) fmt=elf ;; @@ -968,11 +968,18 @@ for this_target in $target $canon_targets ; do # Other random stuff. - test -n "$want_sparcv9" && cat >> confdefs.h <<\EOF -#define sparcv9 1 + test -n "$want_sparc_v9" && cat >> confdefs.h <<\EOF +#define SPARC_V9 1 EOF + case ${cpu}-${vendor}-${os} in + sparc64-*-elf*) cat >> confdefs.h <<\EOF +#define SPARC_ARCH64 1 +EOF + ;; + esac + case ${cpu_type} in m68k) extra_objects="$extra_objects m68k-parse.o" ;; esac @@ -1432,7 +1439,7 @@ else # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. cat > conftest.$ac_ext < Syntax Error @@ -1446,7 +1453,7 @@ else rm -rf conftest* CPP="${CC-cc} -E -traditional-cpp" cat > conftest.$ac_ext < Syntax Error @@ -1479,7 +1486,7 @@ if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF @@ -1531,7 +1538,7 @@ else ac_cv_c_cross=yes else cat > conftest.$ac_ext <&6 else cat > conftest.$ac_ext < int main() { return 0; } @@ -1587,7 +1594,7 @@ if eval "test \"`echo '$''{'ac_cv_func_alloca'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&6 else cat > conftest.$ac_ext <&6 else cat > conftest.$ac_ext < conftest.$ac_ext < conftest.$ac_ext <&6 else cat > conftest.$ac_ext <&6 else cat > conftest.$ac_ext <&6 else cat > conftest.$ac_ext < #include @@ -1975,7 +1982,7 @@ if eval "test \"`echo '$''{'gas_cv_decl_needed_malloc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&6 else cat > conftest.$ac_ext <&6 else cat > conftest.$ac_ext <