From 6f02d76161e7d1b52e4994d83177209a5a93bc7e Mon Sep 17 00:00:00 2001 From: Erik Andr?n Date: Tue, 6 Jan 2009 12:58:50 -0300 Subject: [PATCH] V4L/DVB (11455): gspca - m5602-ov9650: Improve the vflip quirk handling. Regardless of the actual sensor orientation vflip = 0 is normal, and vflip = 1 is upside down. This patch makes that happen Signed-off-by: Erik Andr?n Signed-off-by: Mauro Carvalho Chehab --- .../media/video/gspca/m5602/m5602_ov9650.c | 21 ++++++++++++------- 1 file changed, 13 insertions(+), 8 deletions(-) diff --git a/drivers/media/video/gspca/m5602/m5602_ov9650.c b/drivers/media/video/gspca/m5602/m5602_ov9650.c index 5ea93a85b7d8..2107f3cf6739 100644 --- a/drivers/media/video/gspca/m5602/m5602_ov9650.c +++ b/drivers/media/video/gspca/m5602/m5602_ov9650.c @@ -289,12 +289,6 @@ sensor_found: for (i = 0; i < ARRAY_SIZE(ov9650_ctrls); i++) sensor_settings[i] = ov9650_ctrls[i].qctrl.default_value; sd->sensor_priv = sensor_settings; - - if (dmi_check_system(ov9650_flip_dmi_table) && !err) { - info("vflip quirk active"); - sensor_settings[VFLIP_IDX] = 1; - } - return 0; } @@ -360,7 +354,10 @@ int ov9650_start(struct sd *sd) int ver_offs = cam->cam_mode[sd->gspca_dev.curr_mode].priv; int hor_offs = OV9650_LEFT_OFFSET; - if (sensor_settings[VFLIP_IDX]) + if ((!dmi_check_system(ov9650_flip_dmi_table) && + sensor_settings[VFLIP_IDX]) || + (dmi_check_system(ov9650_flip_dmi_table) && + !sensor_settings[VFLIP_IDX])) ver_offs--; if (width <= 320) @@ -629,7 +626,12 @@ int ov9650_set_hflip(struct gspca_dev *gspca_dev, __s32 val) PDEBUG(D_V4L2, "Set horizontal flip to %d", val); sensor_settings[HFLIP_IDX] = val; - i2c_data = ((val & 0x01) << 5) | (sensor_settings[VFLIP_IDX] << 4); + + if (!dmi_check_system(ov9650_flip_dmi_table)) + i2c_data = ((val & 0x01) << 5) | (sensor_settings[VFLIP_IDX] << 4); + else + i2c_data = ((val & 0x01) << 5) | (!sensor_settings[VFLIP_IDX] << 4); + err = m5602_write_sensor(sd, OV9650_MVFP, &i2c_data, 1); return err; @@ -656,6 +658,9 @@ int ov9650_set_vflip(struct gspca_dev *gspca_dev, __s32 val) PDEBUG(D_V4L2, "Set vertical flip to %d", val); sensor_settings[VFLIP_IDX] = val; + if (dmi_check_system(ov9650_flip_dmi_table)) + val = !val; + i2c_data = ((val & 0x01) << 4) | (sensor_settings[VFLIP_IDX] << 5); err = m5602_write_sensor(sd, OV9650_MVFP, &i2c_data, 1); if (err < 0) -- 2.34.1