From 70fb2c9247df9d48d097257f2d303e3540a2e686 Mon Sep 17 00:00:00 2001 From: John Gilmore Date: Sun, 8 Dec 1991 00:51:08 +0000 Subject: [PATCH] Set version to 4.3.1 so we won't mistake experimental for standard. --- gdb/ChangeLog | 4 + gdb/Makefile.in | 741 ------------------------------------------------ 2 files changed, 4 insertions(+), 741 deletions(-) diff --git a/gdb/ChangeLog b/gdb/ChangeLog index c4de0262d2..9021ee38fd 100644 --- a/gdb/ChangeLog +++ b/gdb/ChangeLog @@ -1,3 +1,7 @@ +Sat Dec 7 16:49:35 1991 John Gilmore (gnu at cygnus.com) + + * Makefile.in: Roll VERSION to 4.3.1. + Sat Dec 7 04:12:35 1991 John Gilmore (gnu at cygnus.com) GDB-4.3 release! diff --git a/gdb/Makefile.in b/gdb/Makefile.in index 2df7405b56..e69de29bb2 100644 --- a/gdb/Makefile.in +++ b/gdb/Makefile.in @@ -1,741 +0,0 @@ -##Copyright (C) 1989-1991 Free Software Foundation, Inc. - -# This file is part of GDB. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - -prefix = /usr/local - -bindir = $(prefix)/bin -datadir = $(prefix)/lib -libdir = $(prefix)/lib -mandir = $(datadir)/man -man1dir = $(mandir)/man1 -man2dir = $(mandir)/man2 -man3dir = $(mandir)/man3 -man4dir = $(mandir)/man4 -man5dir = $(mandir)/man5 -man6dir = $(mandir)/man6 -man7dir = $(mandir)/man7 -man8dir = $(mandir)/man8 -man9dir = $(mandir)/man9 -infodir = $(prefix)/info -includedir = $(prefix)/include -docdir = $(datadir)/doc - -SHELL = /bin/sh - -INSTALL = install -c -INSTALL_PROGRAM = $(INSTALL) -INSTALL_DATA = $(INSTALL) - -AR = ar -AR_FLAGS = qv -RANLIB = ranlib - -#### Host, target, and site specific Makefile fragments come in here. -### - -# Host and target-dependent makefile fragments come in here. -#### -# End of host and target-dependent makefile fragments - -# System V: If you compile gdb with a compiler which uses the coff -# encapsulation feature (this is a function of the compiler used, NOT -# of the m-?.h file selected by config.gdb), you must make sure that -# the GNU nm is the one that is used by munch. - -# If you are compiling with GCC, make sure that either 1) You use the -# -traditional flag, or 2) You have the fixed include files where GCC -# can reach them. Otherwise the ioctl calls in inflow.c -# will be incorrectly compiled. The "fixincludes" script in the gcc -# distribution will fix your include files up. -#CC=cc -#CC=gcc -traditional -GCC=gcc - -# Directory containing source files. Don't clean up the spacing, -# this exact string is matched for by the "configure" script. -srcdir = . - -# It is also possible that you will need to add -I/usr/include/sys to the -# CFLAGS section if your system doesn't have fcntl.h in /usr/include (which -# is where it should be according to Posix). - -BISON=bison -y -BISONFLAGS= -YACC=$(BISON) $(BISONFLAGS) -# YACC=yacc -MAKE=make - -# Documentation (gdb.dvi) needs either GNU m4 or SysV m4; -# Berkeley/Sun don't have quite enough. -#M4=/usr/5bin/m4 -M4=gm4 - -# where to find texinfo; GDB dist should include a recent one -TEXIDIR=${srcdir}/../texinfo/fsf - -# where to find makeinfo, preferably one designed for texinfo-2 -MAKEINFO=makeinfo - -# Set this up with gcc if you have gnu ld and the loader will print out -# line numbers for undefinded refs. -#CC-LD=gcc -static -CC-LD=${CC} - -# define this to be "gmalloc.o" if you want to use the gnu malloc routine -# (useful for debugging memory allocation problems in gdb). To use your -# system malloc, uncomment the following two lines. -#GNU_MALLOC = -#MALLOC_CFLAGS = -DNO_MALLOC_CHECK -GNU_MALLOC = gmalloc.o mcheck.o mtrace.o -MALLOC_CFLAGS = - -# Where is the "include" directory? Traditionally ../include or ./include -INCLUDE_DIR = ${srcdir}/../include -INCLUDE_DEP = $$(INCLUDE_DIR) - -# Where is the source dir for the BFD library? Traditionally ../bfd or ./bfd -# (When we want the binary library built from it, we use ${BFD_DIR}${subdir}.) -BFD_DIR = ${srcdir}/../bfd -BFD_DEP = $$(BFD_DIR) -BFD_LIB = $(unsubdir)/../bfd${subdir}/libbfd.a - -# Where is the source dir for the READLINE library? Traditionally in .. or . -# (For the binary library built from it, we use ${READLINE_DIR}${subdir}.) -READLINE_DIR = ${srcdir}/../readline -READLINE_DEP = $$(READLINE_DIR) -RL_LIB = $(unsubdir)/../readline${subdir}/libreadline.a - -# All the includes used for CFLAGS and for lint. -# -I. for config files. -# -I${srcdir} possibly for regex.h also. -INCLUDE_CFLAGS = -I. -I${srcdir} -I$(INCLUDE_DIR) -I$(READLINE_DIR) -I${srcdir}/vx-share - -# {X,T}M_CFLAGS, if defined, has system-dependent CFLAGS. -# CFLAGS for GDB -MINUS_G=-g -GLOBAL_CFLAGS = ${MINUS_G} ${TM_CFLAGS} ${XM_CFLAGS} -#PROFILE_CFLAGS = -pg - -CFLAGS = ${GLOBAL_CFLAGS} ${PROFILE_CFLAGS} ${MALLOC_CFLAGS} ${INCLUDE_CFLAGS} -# None of the things in CFLAGS will do any harm, and on some systems -# (e.g. SunOS4) it is important to use the M_CFLAGS. -LDFLAGS = $(CFLAGS) - -# Where is the "-liberty" library, containing getopt and obstack? -LIBIBERTY_DIR = ${srcdir}/../libiberty -LIBIBERTY = $(unsubdir)/../libiberty${subdir}/libiberty.a - -# Flags that describe where you can find the termcap library. -# You may need to make other arrangements for USG. -TERMCAP = -ltermcap - -# The config/mh-* file must define REGEX and REGEX1 on USG machines. -# If your sysyem is missing alloca(), or, more likely, it's there but -# it doesn't work, define ALLOCA & ALLOCA1 too. -# If your system is missing putenv(), add putenv.c to XM_ADD_FILES. - -# Libraries and corresponding dependencies for compiling gdb. -# {X,T}M_CLIBS, defined in *config files, have host- and target-dependent libs. -# TERMCAP comes after readline, since readline depends on it. -CLIBS = ${BFD_LIB} ${RL_LIB} ${TERMCAP} ${LIBIBERTY} ${XM_CLIBS} ${TM_CLIBS} -CDEPS = ${XM_CDEPS} ${TM_CDEPS} ${BFD_LIB} ${LIBIBERTY} ${RL_LIB} - -ADD_FILES = ${REGEX} ${ALLOCA} ${GNU_MALLOC} ${XM_ADD_FILES} ${TM_ADD_FILES} -ADD_DEPS = ${REGEX1} ${ALLOCA1} ${GNU_MALLOC} ${XM_ADD_FILES} ${TM_ADD_FILES} - -VERSION = 4.3 -DIST=gdb - -LINT=/usr/5bin/lint -LINTFLAGS= -I${BFD_DIR} - -# Source files in the main directory. -# Files which are included via a config/* Makefile fragment -# should *not* be specified here; they're in "ALLDEPFILES". -SFILES_MAINDIR = \ - blockframe.c breakpoint.c command.c core.c \ - environ.c eval.c expprint.c findvar.c infcmd.c inflow.c infrun.c \ - main.c printcmd.c \ - remote.c source.c stack.c symmisc.c symtab.c symfile.c \ - utils.c valarith.c valops.c valprint.c values.c c-exp.y m2-exp.y \ - signame.c cplus-dem.c mem-break.c target.c inftarg.c \ - dbxread.c coffread.c elfread.c dwarfread.c xcoffread.c \ - ieee-float.c language.c parse.c buildsym.c - -# Source files in subdirectories (which will be handled separately by -# 'make gdb.tar.Z'). -# Files which are included via a config/* Makefile fragment -# should *not* be specified here; they're in "ALLDEPFILES". -SFILES_SUBDIR = \ - ${srcdir}/vx-share/dbgRpcLib.h \ - ${srcdir}/vx-share/ptrace.h \ - ${srcdir}/vx-share/reg.h \ - ${srcdir}/vx-share/vxTypes.h \ - ${srcdir}/vx-share/vxWorks.h \ - ${srcdir}/vx-share/wait.h \ - ${srcdir}/vx-share/xdr_ld.h \ - ${srcdir}/vx-share/xdr_ptrace.h \ - ${srcdir}/vx-share/xdr_rdb.h \ - ${srcdir}/vx-share/xdr_regs.h \ - ${srcdir}/nindy-share/b.out.h \ - ${srcdir}/nindy-share/block_io.h \ - ${srcdir}/nindy-share/coff.h \ - ${srcdir}/nindy-share/demux.h \ - ${srcdir}/nindy-share/env.h \ - ${srcdir}/nindy-share/stop.h \ - ${srcdir}/nindy-share/ttycntl.h - -# Non-source files in subdirs, that should go into gdb.tar.Z. -NONSRC_SUBDIR = \ - ${srcdir}/nindy-share/Makefile \ - ${srcdir}/nindy-share/VERSION - -# All source files that go into linking GDB, except config-specified files. -SFILES = $(SFILES_MAINDIR) $(SFILES_SUBDIR) - -# All source files that lint should look at -LINTFILES = $(SFILES) $(YYFILES) init.c - -# Any additional files specified on these lines should also be added to -# the OTHERS = definition below, so they go in the tar files. -SFILES_STAND = $(SFILES) standalone.c -SFILES_KGDB = $(SFILES) stuff.c kdb-start.c - -# Header files that are not named in config/* Makefile fragments go here. -HFILES= breakpoint.h buildsym.h command.h defs.h environ.h \ - expression.h frame.h gdbcmd.h gdbcore.h \ - ieee-float.h inferior.h minimon.h \ - signals.h signame.h symfile.h symtab.h \ - target.h terminal.h tm-68k.h tm-i960.h tm-sunos.h tm-svr4.h \ - xm-m68k.h xm-svr4.h language.h parser-defs.h value.h - -# Header files for machine opcode tables. -# when OPCODE_DIR changes to ../include, remove the whole $(OPCODES) -# business, since they will be put into the GDB release files by somebody else. -OPCODE_DIR = -OPCODES = $(OPCODE_DIR)pn-opcode.h $(OPCODE_DIR)np1-opcode.h \ - $(OPCODE_DIR)sparc-opcode.h $(OPCODE_DIR)vax-opcode.h \ - $(OPCODE_DIR)m68k-opcode.h $(OPCODE_DIR)ns32k-opcode.h \ - $(OPCODE_DIR)convx-opcode.h $(OPCODE_DIR)pyr-opcode.h \ - $(OPCODE_DIR)mips-opcode.h $(OPCODE_DIR)am29k-opcode.h \ - $(OPCODE_DIR)arm-opcode.h $(OPCODE_DIR)m88k-opcode.h \ - $(OPCODE_DIR)tahoe-opcode.h $(OPCODE_DIR)rs6k-opcode.h - -REMOTE_EXAMPLES = m68k-stub.c i386-stub.c rem-multi.shar - -MALLOCSRC = gmalloc.c mcheck.c mtrace.c mtrace.awk \ - ansidecl.h gmalloc.h - -POSSLIBS_MAINDIR = regex.c regex.h alloca.c $(MALLOCSRC) -POSSLIBS = $(POSSLIBS_MAINDIR) - -TESTS = testbpt.c testfun.c testrec.c testreg.c testregs.c - -OTHERS = Makefile.in depend alldeps.mak createtags munch configure.in \ - ChangeLog ChangeLog-3.x gdb.1 refcard.ps \ - README TODO TAGS WHATS.NEW Projects \ - .gdbinit COPYING $(YYFILES) \ - copying.c Convex.notes copying.awk \ - saber.suppress standalone.c stuff.c kdb-start.c \ - putenv.c - -# Subdirectories of gdb, which should be included in their entirety in -# gdb-xxx.tar.Z: -TARDIRS = doc # tests - -# GDB "info" files, which should be included in their entirety -INFOFILES = gdb.info* - -DEPFILES= ${TDEPFILES} ${XDEPFILES} - -SOURCES=$(SFILES) $(ALLDEPFILES) $(YYFILES) -TAGFILES = $(SOURCES) ${HFILES} ${OPCODES} ${ALLPARAM} ${POSSLIBS} -TAGFILES_MAINDIR = $(SFILES_MAINDIR) $(ALLDEPFILES_MAINDIR) \ - ${HFILES} ${OPCODES} ${ALLPARAM} ${POSSLIBS_MAINDIR} -TARFILES = ${TAGFILES_MAINDIR} ${OTHERS} ${REMOTE_EXAMPLES} - -OBS = main.o blockframe.o breakpoint.o findvar.o stack.o source.o \ - values.o eval.o valops.o valarith.o valprint.o printcmd.o \ - symtab.o symfile.o symmisc.o infcmd.o infrun.o remote.o \ - command.o utils.o expprint.o environ.o version.o \ - copying.o $(DEPFILES) signame.o cplus-dem.o mem-break.o target.o \ - inftarg.o ieee-float.o putenv.o parse.o language.o $(YYOBJ) \ - buildsym.o \ - dbxread.o coffread.o elfread.o dwarfread.o xcoffread.o # mipsread.o - -RAPP_OBS = rgdb.o rudp.o rserial.o serial.o udp.o $(XDEPFILES) - -TSOBS = core.o inflow.o - -NTSOBS = standalone.o - -TSSTART = /lib/crt0.o - -NTSSTART = kdb-start.o - -SUBDIRS = doc - -# For now, shortcut the "configure GDB for fewer languages" stuff. -YYFILES = c-exp.tab.c m2-exp.tab.c -YYOBJ = c-exp.tab.o m2-exp.tab.o - -# Prevent Sun make from putting in the machine type. Setting -# TARGET_ARCH to nothing works for SunOS 3, 4.0, but not for 4.1. -.c.o: - ${CC} -c ${CFLAGS} $< - -all: gdb - $(MAKE) subdir_do DO=all "DODIRS=$(SUBDIRS)" -info: force - $(MAKE) subdir_do DO=info "DODIRS=$(SUBDIRS)" -install-info: force - $(MAKE) subdir_do DO=install-info "DODIRS=$(SUBDIRS)" -clean-info: force - $(MAKE) subdir_do DO=clean-info "DODIRS=$(SUBDIRS)" - -gdb.z:gdb.1 - nroff -man $(srcdir)/gdb.1 | col -b > gdb.t - pack gdb.t ; rm -f gdb.t - mv gdb.t.z gdb.z - -install: gdb - $(INSTALL_PROGRAM) gdb $(bindir)/gdb - $(M_INSTALL) - $(MAKE) subdir_do DO=install "DODIRS=$(SUBDIRS)" - -init.c: $(srcdir)/munch $(OBS) $(TSOBS) - $(srcdir)/munch ${MUNCH_DEFINE} $(OBS) $(TSOBS) > init.c - -gdb: $(OBS) $(TSOBS) ${ADD_DEPS} ${CDEPS} init.o - ${CC-LD} $(LDFLAGS) -o gdb init.o $(OBS) $(TSOBS) $(ADD_FILES) \ - $(CLIBS) $(LOADLIBES) - -saber_gdb: $(SFILES) $(DEPFILES) copying.c version.c - #setopt load_flags $(CFLAGS) -I$(BFD_DIR) -DHOST_SYS=SUN4_SYS - #load ./init.c $(SFILES) - #unload ${srcdir}/c-exp.y ${srcdir}/m2-exp.y ${srcdir}/vx-share/*.h - #unload ${srcdir}/nindy-share/[A-Z]* - #load c-exp.tab.c m2-exp.tab.c - #load copying.c version.c - #load `echo " "$(DEPFILES) | sed -e 's/\.o/.c/g' -e 's, , ../,g'` - #load ${LIBIBERTY_DIR}/*.c - #load ${BFD_DIR}/*.c - #load ${READLINE_DIR}/*.c - #load -ltermcap - ##void mcheck(a) void (*a)(); { } - ##void mtrace() { } - - - -# This is useful when debugging GDB, because some Unix's don't let you run GDB -# on itself without copying the executable. So "make gdb1" will make -# gdb and put a copy in gdb1, and you can run it with "gdb gdb1". -# Removing gdb1 before the copy is the right thing if gdb1 is open -# in another process. -gdb1: gdb - rm -f gdb1 - cp gdb gdb1 - -# This is a remote stub which runs under unix and starts up an -# inferior process. This is at least useful for debugging GDB's -# remote support. -rapp: $(RAPP_OBS) - rm -f rapp_init.c - ${srcdir}/munch ${MUNCH_DEFINE} ${RAPP_OBS} > rapp_init.c - ${CC-LD} $(LDFLAGS) -o $@ rapp_init.c $(RAPP_OBS) - -# Support for building Makefile out of configured pieces, automatically -# generated dependencies, etc. alldeps.mak is a file that contains -# "make" variable definitions for all ALLDEPFILES, ALLDEPFILES_MAINDIR, -# ALLDEPFILES_SUBDIR, ALLPARAM, and ALLCONFIG, all cadged from the current -# contents of the config subdirectory. - -alldeps.mak: ${srcdir}/config - rm -f alldeps.mak alldeps.tmp allparam.tmp allconfig.tmp - for i in `ls -d ${srcdir}/config/m[ht]-*` ; do \ - echo $$i >>allconfig.tmp; \ - awk <$$i ' \ - $$1 == "TDEPFILES=" || $$1 == "XDEPFILES=" { \ - for (i = 2; i <= NF; i++) \ - print $$i >> "alldeps.tmp" ; \ - } \ - $$1 == "TM_FILE=" || $$1 == "XM_FILE=" { \ - print $$2 >> "allparam.tmp" }' ; \ - done - sort alldeps2.tmp - echo '# Start of "alldeps.mak" definitions' \ - >>alldeps.mak; - echo 'ALLDEPFILES = $$(ALLDEPFILES_MAINDIR) $$(ALLDEPFILES_SUBDIR)' \ - >>alldeps.mak; - grep -v / alldeps2.tmp | \ - awk 'BEGIN {printf "ALLDEPFILES_MAINDIR="} \ - NR == 0 {printf $$0;} \ - NR != 0 {printf "\\\n" $$0} \ - END {printf "\n\n"}' >>alldeps.mak; - grep / alldeps2.tmp | \ - awk 'BEGIN {printf "ALLDEPFILES_SUBDIR="} \ - NR == 0 {printf $$0;} \ - NR != 0 {printf "\\\n" $$0} \ - END {printf "\n\n"}' >>alldeps.mak; - sort >alldeps.mak; - sort >alldeps.mak; - echo '# End of "alldeps.mak" definitions' \ - >>alldeps.mak; - rm -f alldeps.tmp alldeps2.tmp allparam.tmp allconfig.tmp - -# The sed script makes everything which depends on {x,t}m.h depend on -# config.status as well, in case someone reconfigures gdb out from -# under an already compiled gdb. -depend: $(SOURCES) Makefile.in - @echo Ignore errors about non-existent system-supplied include files - @echo for systems other than the one you are using. - @echo "If xm.h and tm.h don't exist, the error messages saying so" - @echo can safely be ignored. - @echo Also ignore parse errors in valops.c, and any errors in - @echo arm-convert.s. - -$(GCC) -MM $(CFLAGS) -I$(BFD_DIR) \ - `ls $(SOURCES) | grep -v '\.[hy]$$' |sort -u` >depend.tmp -# If running in srcdir, translate "./foo.c" into "$srcdir/foo.c" except -# for xm.h and tm.h. This allows the same "depend" file to be used -# by the various subdirectories. - if [ "${srcdir}" = "." ] ; then \ - depend.tm2; \ - rm depend.tmp; \ - mv depend.tm2 depend.tmp; \ - fi - depend - rm depend.tmp - -config.status: - @echo "You must configure gdb. Look at the README file for details." - @false - -# These are not generated by "make depend" because they only are there -# for some machines. -# But these rules don't do what we want; we want to hack the foo.o: tm.h -# dependency to do the right thing. -tm-isi.h tm-sun3.h tm-news.h tm-hp300bsd.h tm-altos.h: tm-68k.h -tm-hp300hpux.h tm-sun2.h tm-3b1.h: tm-68k.h -xm-news1000.h: xm-news.h -xm-i386-sv32.h: xm-i386.h -tm-i386gas.h: tm-i386.h -xm-sun4os4.h: xm-sparc.h -tm-sun4os4.h: tm-sparc.h - -kdb: $(NTSSTART) $(OBS) $(NTSOBS) ${ADD_DEPS} ${CDEPS} - rm -f init.c - $(srcdir)/munch ${MUNCH_DEFINE} $(OBS) $(NTSOBS) > init.c - $(CC) $(LDFLAGS) -c init.c $(CLIBS) - ld -o kdb $(NTSSTART) $(OBS) $(NTSOBS) init.o $(ADD_FILES) \ - -lc $(CLIBS) - -# Put the proper machine-specific files first. -# createtags will edit the .o in DEPFILES into .c -TAGS: ${TAGFILES} - $(srcdir)/createtags $(TM_FILE) ${XM_FILE} $(DEPFILES) ${TAGFILES} -tags: TAGS - -# Making distributions of GDB and friends. - -# Make a directory `proto-gdb.dir' that contains an image of the GDB -# directory of the distribution, built up with symlinks. -make-proto-gdb.dir: force_update - $(MAKE) $(MFLAGS) -f Makefile.in setup-to-dist - $(MAKE) $(MFLAGS) -f Makefile make-proto-gdb-1 - -# Make a tar file containing the GDB directory of the distribution. -gdb.tar.Z: force_update - $(MAKE) $(MFLAGS) -f Makefile.in setup-to-dist - $(MAKE) $(MFLAGS) -f Makefile.in gdb-$(VERSION).tar.Z - -# Set up the GDB directory for distribution, by building all files that -# are products of other files. -setup-to-dist: force_update - ../configure none - rm -f alldeps.mak - $(MAKE) $(MFLAGS) alldeps.mak - ../configure none - rm -f depend - $(MAKE) $(MFLAGS) depend - ../configure none - (cd doc; $(MAKE) $(MFLAGS) rdl-apps.texi gdbVN.m4) - $(MAKE) $(MFLAGS) gdb.info - $(MAKE) $(MFLAGS) refcard.ps - -# Build a tar file from a proto-gdb.dir. -gdb-$(VERSION).tar.Z: force_update - rm -f gdb.tar gdb-$(VERSION).tar.Z - $(MAKE) $(MFLAGS) -f Makefile make-proto-gdb-1 - ln -s proto-gdb.dir $(DIST) - tar chf - $(DIST) | compress >gdb-$(VERSION).tar.Z - rm -rf $(DIST) proto-gdb.dir - -# Build a proto-gdb.dir after GDB has been set up for distribution. -# This stuff must be run in `Makefile', not `Makefile.in`; we use the makefile -# built in the setup-to-dist process, since it defines things like ALLCONFIG -# and ALLDEPFILES, that we need. -make-proto-gdb-1: ${TARFILES} ${TARDIRS} gdb.info - rm -rf proto-gdb.dir - mkdir proto-gdb.dir - cd proto-gdb.dir ; for i in ${TARFILES} ; do ln -s ../$$i . ; done - cd proto-gdb.dir ; ln -s ../${INFOFILES} . - cd proto-gdb.dir ; for i in ${TARDIRS}; do \ - (mkdir $$i; cd $$i; \ - ln -s ../../$$i/* .; \ - rm -rf SCCS CVS.adm RCS config.status); done - mkdir proto-gdb.dir/config - cd proto-gdb.dir/config ; \ - for i in $(ALLCONFIG) ; do ln -s ../../$$i ../$$i ; done - mkdir proto-gdb.dir/vx-share proto-gdb.dir/nindy-share - cd proto-gdb.dir/config ; \ - for i in $(SFILES_SUBDIR) $(NONSRC_SUBDIR) $(ALLDEPFILES_SUBDIR); \ - do ln -s ../../$$i ../$$i ; done - chmod og=u `find . -print` - -clean: - rm -f ${OBS} ${TSOBS} ${NTSOBS} ${ADD_FILES} - rm -f init.c init.o version.c - rm -f gdb core gdb.tar gdb.tar.Z make.log - rm -f gdb[0-9] - $(MAKE) subdir_do DO=clean "DODIRS=$(SUBDIRS)" - -distclean: clean c-exp.tab.c m2-exp.tab.c TAGS - rm -f tm.h xm.h config.status - rm -f y.output yacc.acts yacc.tmp - rm -f ${TESTS} Makefile depend - $(MAKE) subdir_do DO=distclean "DODIRS=$(SUBDIRS)" - -realclean: clean - rm -f c-exp.tab.c m2-exp.tab.c TAGS - rm -f tm.h xm.h config.status - rm -f Makefile depend - $(MAKE) subdir_do DO=realclean "DODIRS=$(SUBDIRS)" - -STAGESTUFF=${OBS} ${TSOBS} ${NTSOBS} ${ADD_FILES} init.c init.o version.c gdb - -subdir_do: force - for i in $(DODIRS); do \ - if [ -d $(unsubdir)/$$i ] ; then \ - if (cd $(unsubdir)/$$i$(subdir); \ - $(MAKE) \ - "against=$(against)" \ - "AR=$(AR)" \ - "AR_FLAGS=$(AR_FLAGS)" \ - "CC=$(CC)" \ - "RANLIB=$(RANLIB)" \ - "BISON=$(BISON)" $(DO)) ; then true ; \ - else exit 1 ; fi ; \ - else true ; fi ; \ - done - -# Copy the object files from a particular stage into a subdirectory. -stage1: force - -mkdir stage1 - -mv -f $(STAGESTUFF) stage1 - $(MAKE) subdir_do DO=stage1 "DODIRS=$(SUBDIRS)" - -stage2: force - -mkdir stage2 - -mv -f $(STAGESTUFF) stage2 - $(MAKE) subdir_do DO=stage2 "DODIRS=$(SUBDIRS)" - -stage3: force - -mkdir stage3 - -mv -f $(STAGESTUFF) stage3 - $(MAKE) subdir_do DO=stage3 "DODIRS=$(SUBDIRS)" - -against=stage2 - -comparison: force - for i in $(STAGESTUFF) ; do cmp $$i $(against)/$$i ; done - $(MAKE) subdir_do DO=comparison "DODIRS=$(SUBDIRS)" - -de-stage1: force - -(cd stage1 ; mv -f * ..) - -rmdir stage1 - $(MAKE) subdir_do DO=de-stage1 "DODIRS=$(SUBDIRS)" - -de-stage2: force - -(cd stage2 ; mv -f * ..) - -rmdir stage2 - $(MAKE) subdir_do DO=de-stage2 "DODIRS=$(SUBDIRS)" - -de-stage3: force - -(cd stage3 ; mv -f * ..) - -rmdir stage3 - $(MAKE) subdir_do DO=de-stage3 "DODIRS=$(SUBDIRS)" - -Makefile: $(srcdir)/Makefile.in $(host_makefile_frag) $(target_makefile_frag) - $(SHELL) ./config.status - -force: - -# Documentation! -# GDB QUICK REFERENCE (TeX dvi file, CM fonts) -refcard.dvi: $(srcdir)/doc/refcard.tex - ( cd $(srcdir)/doc; $(MAKE) refcard.dvi ) - mv $(srcdir)/doc/refcard.dvi . - -# GDB QUICK REFERENCE (PostScript output, common PS fonts) -refcard.ps: $(srcdir)/doc/refcard.tex - ( cd $(srcdir)/doc; $(MAKE) refcard.ps ) - mv $(srcdir)/doc/refcard.ps . - -# GDB MANUAL: TeX dvi file -gdb.dvi: $(srcdir)/doc/gdb-all.texi $(srcdir)/doc/rdl-apps.texi - ( cd $(srcdir)/doc; $(MAKE) M4=$(M4) gdb.dvi ) - mv $(srcdir)/doc/gdb.dvi . - -# GDB MANUAL: info file -gdb.info: $(srcdir)/doc/gdb-all.texi - ( cd $(srcdir)/doc; $(MAKE) M4=$(M4) gdb.info ) - mv $(srcdir)/doc/gdb.info* . - -$(srcdir)/doc/gdb-all.texi: - (cd $(srcdir)/doc; $(MAKE) M4=$(M4) gdb-all.texi) -$(srcdir)/doc/rdl-apps.texi: - (cd $(srcdir)/doc; $(MAKE) rdl-apps.texi) - -# Make copying.c from COPYING -copying.c: ${srcdir}/COPYING ${srcdir}/copying.awk - awk -f ${srcdir}/copying.awk < ${srcdir}/COPYING > copying.c - -version.c: Makefile.in - echo 'char *version = "$(VERSION)";' >version.c - -# c-exp.tab.c is generated in target dir from c-exp.y if it doesn't exist -# in srcdir, then compiled in target dir to c-exp.tab.o. -c-exp.tab.o: c-exp.tab.c -c-exp.tab.c: $(srcdir)/c-exp.y - @echo 'Expect 4 shift/reduce conflicts.' - ${YACC} $(srcdir)/c-exp.y - -mv y.tab.c c-exp.tab.c - -# m2-exp.tab.c is generated in target dir from m2-exp.y if it doesn't exist -# in srcdir, then compiled in target dir to m2-exp.tab.o. -m2-exp.tab.o: m2-exp.tab.c -m2-exp.tab.c: $(srcdir)/m2-exp.y - ${YACC} $(srcdir)/m2-exp.y - -mv y.tab.c m2-exp.tab.c - -# The symbol-file readers have dependencies on BFD header files. -dbxread.o: ${srcdir}/dbxread.c - ${CC} -c ${CFLAGS} -I$(BFD_DIR) ${srcdir}/dbxread.c - -coffread.o: ${srcdir}/coffread.c - ${CC} -c ${CFLAGS} -I$(BFD_DIR) ${srcdir}/coffread.c - -mipsread.o: ${srcdir}/mipsread.c - ${CC} -c ${CFLAGS} -I$(BFD_DIR) ${srcdir}/mipsread.c - -elfread.o: ${srcdir}/elfread.c - ${CC} -c ${CFLAGS} -I$(BFD_DIR) ${srcdir}/elfread.c - -xcoffread.o: ${srcdir}/xcoffread.c - ${CC} -c ${CFLAGS} -I$(BFD_DIR) ${srcdir}/xcoffread.c - -xcoffexec.o: ${srcdir}/xcoffexec.c - ${CC} -c ${CFLAGS} -I$(BFD_DIR) ${srcdir}/xcoffexec.c - -# Drag in the files that are in another directory. - -xdr_ld.o: ${srcdir}/vx-share/xdr_ld.c - ${CC} -c ${CFLAGS} ${srcdir}/vx-share/xdr_ld.c - -xdr_ptrace.o: ${srcdir}/vx-share/xdr_ptrace.c - ${CC} -c ${CFLAGS} ${srcdir}/vx-share/xdr_ptrace.c - -xdr_rdb.o: ${srcdir}/vx-share/xdr_rdb.c - ${CC} -c ${CFLAGS} ${srcdir}/vx-share/xdr_rdb.c - -xdr_regs.o: ${srcdir}/vx-share/xdr_regs.c - ${CC} -c ${CFLAGS} ${srcdir}/vx-share/xdr_regs.c - -nindy.o: ${srcdir}/nindy-share/nindy.c - ${CC} -c ${CFLAGS} ${srcdir}/nindy-share/nindy.c - -Onindy.o: ${srcdir}/nindy-share/Onindy.c - ${CC} -c ${CFLAGS} ${srcdir}/nindy-share/Onindy.c - -ttybreak.o: ${srcdir}/nindy-share/ttybreak.c - ${CC} -c ${CFLAGS} ${srcdir}/nindy-share/ttybreak.c - -ttyflush.o: ${srcdir}/nindy-share/ttyflush.c - ${CC} -c ${CFLAGS} ${srcdir}/nindy-share/ttyflush.c - -lint: $(LINTFILES) - $(LINT) $(INCLUDE_CFLAGS) $(LINTFLAGS) $(LINTFILES) \ - `echo ${DEPFILES} | sed 's/\.o /\.c /g' - -gdb.cxref: $(SFILES) - cxref -I. $(SFILES) >gdb.cxref - -force_update: - -# When used with GDB, the demangler should never look for leading -# underscores because GDB strips them off during symbol read-in. Thus -# -Dnounderscore. - -cplus-dem.o: cplus-dem.c - ${CC} -c ${CFLAGS} -Dnounderscore \ - `echo ${srcdir}/cplus-dem.c | sed 's,^\./,,'` - -# GNU Make has an annoying habit of putting *all* the Makefile variables -# into the environment, unless you include this target as a circumvention. -# Rumor is that this will be fixed (and this target can be removed) -# in GNU Make 4.0. -.NOEXPORT: - -# This is the end of "Makefile.in". When built into "Makefile" -# by the configure script, two things are added below this point: -# alldeps.mak -- defintions of all files that are used in -# host- or target-dependent configurations -# depend -- what .o files depend on what .c and .h files, -# for all configurations. - - -- 2.34.1