From 7536656f08d0c1a3b4c487d00785c5186ec6f533 Mon Sep 17 00:00:00 2001 From: Andy Lutomirski Date: Wed, 9 Mar 2016 19:00:32 -0800 Subject: [PATCH] x86/entry/32: Simplify and fix up the SYSENTER stack #DB/NMI fixup Right after SYSENTER, we can get a #DB or NMI. On x86_32, there's no IST, so the exception handler is invoked on the temporary SYSENTER stack. Because the SYSENTER stack is very small, we have a fixup to switch off the stack quickly when this happens. The old fixup had several issues: 1. It checked the interrupt frame's CS and EIP. This wasn't obviously correct on Xen or if vm86 mode was in use [1]. 2. In the NMI handler, it did some frightening digging into the stack frame. I'm not convinced this digging was correct. 3. The fixup didn't switch stacks and then switch back. Instead, it synthesized a brand new stack frame that would redirect the IRET back to the SYSENTER code. That frame was highly questionable. For one thing, if NMI nested inside #DB, we would effectively abort the #DB prologue, which was probably safe but was frightening. For another, the code used PUSHFL to write the FLAGS portion of the frame, which was simply bogus -- by the time PUSHFL was called, at least TF, NT, VM, and all of the arithmetic flags were clobbered. Simplify this considerably. Instead of looking at the saved frame to see where we came from, check the hardware ESP register against the SYSENTER stack directly. Malicious user code cannot spoof the kernel ESP register, and by moving the check after SAVE_ALL, we can use normal PER_CPU accesses to find all the relevant addresses. With this patch applied, the improved syscall_nt_32 test finally passes on 32-bit kernels. [1] It isn't obviously correct, but it is nonetheless safe from vm86 shenanigans as far as I can tell. A user can't point EIP at entry_SYSENTER_32 while in vm86 mode because entry_SYSENTER_32, like all kernel addresses, is greater than 0xffff and would thus violate the CS segment limit. Signed-off-by: Andy Lutomirski Cc: Andrew Cooper Cc: Andy Lutomirski Cc: Borislav Petkov Cc: Brian Gerst Cc: Denys Vlasenko Cc: H. Peter Anvin Cc: Linus Torvalds Cc: Oleg Nesterov Cc: Peter Zijlstra Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/b2cdbc037031c07ecf2c40a96069318aec0e7971.1457578375.git.luto@kernel.org Signed-off-by: Ingo Molnar --- arch/x86/entry/entry_32.S | 114 ++++++++++++++----------------- arch/x86/kernel/asm-offsets_32.c | 5 ++ 2 files changed, 56 insertions(+), 63 deletions(-) diff --git a/arch/x86/entry/entry_32.S b/arch/x86/entry/entry_32.S index b2e1d446bdf8..7b3ec24ede82 100644 --- a/arch/x86/entry/entry_32.S +++ b/arch/x86/entry/entry_32.S @@ -976,51 +976,48 @@ error_code: jmp ret_from_exception END(page_fault) -/* - * Debug traps and NMI can happen at the one SYSENTER instruction - * that sets up the real kernel stack. Check here, since we can't - * allow the wrong stack to be used. - * - * "TSS_sysenter_sp0+12" is because the NMI/debug handler will have - * already pushed 3 words if it hits on the sysenter instruction: - * eflags, cs and eip. - * - * We just load the right stack, and push the three (known) values - * by hand onto the new stack - while updating the return eip past - * the instruction that would have done it for sysenter. - */ -.macro FIX_STACK offset ok label - cmpw $__KERNEL_CS, 4(%esp) - jne \ok -\label: - movl TSS_sysenter_sp0 + \offset(%esp), %esp - pushfl - pushl $__KERNEL_CS - pushl $sysenter_past_esp -.endm - ENTRY(debug) + /* + * #DB can happen at the first instruction of + * entry_SYSENTER_32 or in Xen's SYSENTER prologue. If this + * happens, then we will be running on a very small stack. We + * need to detect this condition and switch to the thread + * stack before calling any C code at all. + * + * If you edit this code, keep in mind that NMIs can happen in here. + */ ASM_CLAC - cmpl $entry_SYSENTER_32, (%esp) - jne debug_stack_correct - FIX_STACK 12, debug_stack_correct, debug_esp_fix_insn -debug_stack_correct: pushl $-1 # mark this as an int SAVE_ALL - TRACE_IRQS_OFF xorl %edx, %edx # error code 0 movl %esp, %eax # pt_regs pointer + + /* Are we currently on the SYSENTER stack? */ + PER_CPU(cpu_tss + CPU_TSS_SYSENTER_stack + SIZEOF_SYSENTER_stack, %ecx) + subl %eax, %ecx /* ecx = (end of SYSENTER_stack) - esp */ + cmpl $SIZEOF_SYSENTER_stack, %ecx + jb .Ldebug_from_sysenter_stack + + TRACE_IRQS_OFF + call do_debug + jmp ret_from_exception + +.Ldebug_from_sysenter_stack: + /* We're on the SYSENTER stack. Switch off. */ + movl %esp, %ebp + movl PER_CPU_VAR(cpu_current_top_of_stack), %esp + TRACE_IRQS_OFF call do_debug + movl %ebp, %esp jmp ret_from_exception END(debug) /* - * NMI is doubly nasty. It can happen _while_ we're handling - * a debug fault, and the debug fault hasn't yet been able to - * clear up the stack. So we first check whether we got an - * NMI on the sysenter entry path, but after that we need to - * check whether we got an NMI on the debug path where the debug - * fault happened on the sysenter path. + * NMI is doubly nasty. It can happen on the first instruction of + * entry_SYSENTER_32 (just like #DB), but it can also interrupt the beginning + * of the #DB handler even if that #DB in turn hit before entry_SYSENTER_32 + * switched stacks. We handle both conditions by simply checking whether we + * interrupted kernel code running on the SYSENTER stack. */ ENTRY(nmi) ASM_CLAC @@ -1031,41 +1028,32 @@ ENTRY(nmi) popl %eax je nmi_espfix_stack #endif - cmpl $entry_SYSENTER_32, (%esp) - je nmi_stack_fixup - pushl %eax - movl %esp, %eax - /* - * Do not access memory above the end of our stack page, - * it might not exist. - */ - andl $(THREAD_SIZE-1), %eax - cmpl $(THREAD_SIZE-20), %eax - popl %eax - jae nmi_stack_correct - cmpl $entry_SYSENTER_32, 12(%esp) - je nmi_debug_stack_check -nmi_stack_correct: - pushl %eax + + pushl %eax # pt_regs->orig_ax SAVE_ALL xorl %edx, %edx # zero error code movl %esp, %eax # pt_regs pointer + + /* Are we currently on the SYSENTER stack? */ + PER_CPU(cpu_tss + CPU_TSS_SYSENTER_stack + SIZEOF_SYSENTER_stack, %ecx) + subl %eax, %ecx /* ecx = (end of SYSENTER_stack) - esp */ + cmpl $SIZEOF_SYSENTER_stack, %ecx + jb .Lnmi_from_sysenter_stack + + /* Not on SYSENTER stack. */ call do_nmi jmp restore_all_notrace -nmi_stack_fixup: - FIX_STACK 12, nmi_stack_correct, 1 - jmp nmi_stack_correct - -nmi_debug_stack_check: - cmpw $__KERNEL_CS, 16(%esp) - jne nmi_stack_correct - cmpl $debug, (%esp) - jb nmi_stack_correct - cmpl $debug_esp_fix_insn, (%esp) - ja nmi_stack_correct - FIX_STACK 24, nmi_stack_correct, 1 - jmp nmi_stack_correct +.Lnmi_from_sysenter_stack: + /* + * We're on the SYSENTER stack. Switch off. No one (not even debug) + * is using the thread stack right now, so it's safe for us to use it. + */ + movl %esp, %ebp + movl PER_CPU_VAR(cpu_current_top_of_stack), %esp + call do_nmi + movl %ebp, %esp + jmp restore_all_notrace #ifdef CONFIG_X86_ESPFIX32 nmi_espfix_stack: diff --git a/arch/x86/kernel/asm-offsets_32.c b/arch/x86/kernel/asm-offsets_32.c index fdeb0ce07c16..ecdc1d217dc0 100644 --- a/arch/x86/kernel/asm-offsets_32.c +++ b/arch/x86/kernel/asm-offsets_32.c @@ -52,6 +52,11 @@ void foo(void) DEFINE(TSS_sysenter_sp0, offsetof(struct tss_struct, x86_tss.sp0) - offsetofend(struct tss_struct, SYSENTER_stack)); + /* Offset from cpu_tss to SYSENTER_stack */ + OFFSET(CPU_TSS_SYSENTER_stack, tss_struct, SYSENTER_stack); + /* Size of SYSENTER_stack */ + DEFINE(SIZEOF_SYSENTER_stack, sizeof(((struct tss_struct *)0)->SYSENTER_stack)); + #if defined(CONFIG_LGUEST) || defined(CONFIG_LGUEST_GUEST) || defined(CONFIG_LGUEST_MODULE) BLANK(); OFFSET(LGUEST_DATA_irq_enabled, lguest_data, irq_enabled); -- 2.34.1