From 765919103a50ab80723f4e1c01ba1173c12938e5 Mon Sep 17 00:00:00 2001 From: =?utf8?q?Lothar=20Wa=C3=9Fmann?= Date: Wed, 20 Jan 2016 13:57:03 +0100 Subject: [PATCH] ARM: dts: imx6qdl-tx6: add ENET_OUT clock to fec node MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Transfer-Encoding: 8bit ENET_OUT is used as reference clock for the ethernet PHY on the Ka-Ro TX6 modules. Specify this clock in DTB to let it be managed correctly by the driver. Signed-off-by: Lothar Waßmann Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6qdl-tx6.dtsi | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/arm/boot/dts/imx6qdl-tx6.dtsi b/arch/arm/boot/dts/imx6qdl-tx6.dtsi index 29f2c2a8f4fd..efd06b576f1d 100644 --- a/arch/arm/boot/dts/imx6qdl-tx6.dtsi +++ b/arch/arm/boot/dts/imx6qdl-tx6.dtsi @@ -227,6 +227,11 @@ &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; + clocks = <&clks IMX6QDL_CLK_ENET>, + <&clks IMX6QDL_CLK_ENET>, + <&clks IMX6QDL_CLK_ENET_REF>, + <&clks IMX6QDL_CLK_ENET_REF>; + clock-names = "ipg", "ahb", "ptp", "enet_out"; phy-mode = "rmii"; phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_HIGH>; phy-supply = <®_3v3_etn>; -- 2.34.1