From 7c68d6b7171aa2f3d0c68b9ff54a2e1f0f0e228f Mon Sep 17 00:00:00 2001 From: =?utf8?q?David=20T=C3=A4ht?= Date: Tue, 20 Jan 2009 08:33:20 -0600 Subject: [PATCH] Staging: frontier: Make checkpatch.pl considerably happier with tranzport driver. MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Transfer-Encoding: 8bit Signed-off-by: David Täht Signed-off-by: Greg Kroah-Hartman --- drivers/staging/frontier/tranzport.c | 729 +++++++++++++++------------ 1 file changed, 414 insertions(+), 315 deletions(-) diff --git a/drivers/staging/frontier/tranzport.c b/drivers/staging/frontier/tranzport.c index 79abb6b16f74..4ed8ac8b6430 100644 --- a/drivers/staging/frontier/tranzport.c +++ b/drivers/staging/frontier/tranzport.c @@ -18,7 +18,7 @@ * */ -/** +/* * This driver uses a ring buffer for time critical reading of * interrupt in reports and provides read and write methods for * raw interrupt reports. @@ -30,7 +30,7 @@ * as we only have 17 commands for the tranzport. In particular this is * key for getting lights to flash in time as otherwise many commands * can be buffered up before the light change makes it to the interface. -*/ + */ #include #include @@ -40,56 +40,47 @@ #include #include -#include +#include #include #include #include -#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 19) -#include frontier_compat.h -#endif - /* Define these values to match your devices */ #define VENDOR_ID 0x165b -#define PRODUCT_ID 0x8101 +#define PRODUCT_ID 0x8101 #ifdef CONFIG_USB_DYNAMIC_MINORS #define USB_TRANZPORT_MINOR_BASE 0 -#else -// FIXME 176 - is the ldusb driver's minor - apply for a minor soon +#else /* FIXME 176 - is the ldusb driver's minor - apply for a minor soon */ #define USB_TRANZPORT_MINOR_BASE 177 #endif /* table of devices that work with this driver */ -static struct usb_device_id usb_tranzport_table [] = { - { USB_DEVICE(VENDOR_ID, PRODUCT_ID) }, - { } /* Terminating entry */ +static struct usb_device_id usb_tranzport_table[] = { + {USB_DEVICE(VENDOR_ID, PRODUCT_ID)}, + {} /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, usb_tranzport_table); -MODULE_VERSION("0.33"); +MODULE_VERSION("0.34"); MODULE_AUTHOR("Mike Taht "); MODULE_DESCRIPTION("Tranzport USB Driver"); MODULE_LICENSE("GPL"); MODULE_SUPPORTED_DEVICE("Frontier Designs Tranzport Control Surface"); -/* These two aren't done yet */ - -#define SUPPRESS_EXTRA_ONLINE_EVENTS 0 -#define BUFFERED_WRITES 0 - #define SUPPRESS_EXTRA_OFFLINE_EVENTS 1 #define COMPRESS_WHEEL_EVENTS 1 #define BUFFERED_READS 1 #define RING_BUFFER_SIZE 1000 #define WRITE_BUFFER_SIZE 34 #define TRANZPORT_USB_TIMEOUT 10 +#define TRANZPORT_DEBUG 0 - -static int debug = 0; +static int debug = TRANZPORT_DEBUG; /* Use our own dbg macro */ -#define dbg_info(dev, format, arg...) do { if (debug) dev_info(dev , format , ## arg); } while (0) +#define dbg_info(dev, format, arg...) do \ + { if (debug) dev_info(dev , format , ## arg); } while (0) /* Module parameters */ @@ -102,13 +93,13 @@ MODULE_PARM_DESC(debug, "Debug enabled or not"); static int ring_buffer_size = RING_BUFFER_SIZE; -module_param(ring_buffer_size, int, S_IRUGO); +module_param(ring_buffer_size, int, S_IRUGO); MODULE_PARM_DESC(ring_buffer_size, "Read ring buffer size in reports"); /* The write_buffer can one day contain more than one interrupt out transfer. */ static int write_buffer_size = WRITE_BUFFER_SIZE; -module_param(write_buffer_size, int, S_IRUGO); +module_param(write_buffer_size, int, S_IRUGO); MODULE_PARM_DESC(write_buffer_size, "Write buffer size"); /* @@ -118,14 +109,16 @@ MODULE_PARM_DESC(write_buffer_size, "Write buffer size"); static int min_interrupt_in_interval = TRANZPORT_USB_TIMEOUT; module_param(min_interrupt_in_interval, int, 0); -MODULE_PARM_DESC(min_interrupt_in_interval, "Minimum interrupt in interval in ms"); +MODULE_PARM_DESC(min_interrupt_in_interval, + "Minimum interrupt in interval in ms"); static int min_interrupt_out_interval = TRANZPORT_USB_TIMEOUT; module_param(min_interrupt_out_interval, int, 0); -MODULE_PARM_DESC(min_interrupt_out_interval, "Minimum interrupt out interval in ms"); +MODULE_PARM_DESC(min_interrupt_out_interval, + "Minimum interrupt out interval in ms"); struct tranzport_cmd { - unsigned char cmd[8]; + unsigned char cmd[8]; }; enum LightID { @@ -136,50 +129,45 @@ enum LightID { LightAnysolo, LightLoop, LightPunch - }; +}; /* Structure to hold all of our device specific stuff */ struct usb_tranzport { - struct semaphore sem; /* locks this structure */ - struct usb_interface* intf; /* save off the usb interface pointer */ - - int open_count; /* number of times this port has been opened */ - - struct tranzport_cmd (*ring_buffer)[RING_BUFFER_SIZE]; /* just make c happy */ - unsigned int ring_head; - unsigned int ring_tail; - - wait_queue_head_t read_wait; - wait_queue_head_t write_wait; - - unsigned char* interrupt_in_buffer; - struct usb_endpoint_descriptor* interrupt_in_endpoint; - struct urb* interrupt_in_urb; - int interrupt_in_interval; - size_t interrupt_in_endpoint_size; - int interrupt_in_running; - int interrupt_in_done; - - char* interrupt_out_buffer; - struct usb_endpoint_descriptor* interrupt_out_endpoint; - struct urb* interrupt_out_urb; - int interrupt_out_interval; - size_t interrupt_out_endpoint_size; - int interrupt_out_busy; + struct semaphore sem; /* locks this structure */ + struct usb_interface *intf; /* save off the usb interface pointer */ + int open_count; /* number of times this port opened */ + struct tranzport_cmd (*ring_buffer)[RING_BUFFER_SIZE]; + unsigned int ring_head; + unsigned int ring_tail; + wait_queue_head_t read_wait; + wait_queue_head_t write_wait; + unsigned char *interrupt_in_buffer; + struct usb_endpoint_descriptor *interrupt_in_endpoint; + struct urb *interrupt_in_urb; + int interrupt_in_interval; + size_t interrupt_in_endpoint_size; + int interrupt_in_running; + int interrupt_in_done; + char *interrupt_out_buffer; + struct usb_endpoint_descriptor *interrupt_out_endpoint; + struct urb *interrupt_out_urb; + int interrupt_out_interval; + size_t interrupt_out_endpoint_size; + int interrupt_out_busy; /* Sysfs and translation support */ - int event; /* alternate interface to events */ - int wheel; /* - for negative, 0 for none, + for positive */ - unsigned char dump_state; /* 0 if disabled 1 if enabled */ - unsigned char enable; /* 0 if disabled 1 if enabled */ - unsigned char offline; /* if the device is out of range or asleep */ - unsigned char compress_wheel; /* flag to compress wheel events */ - unsigned char light; /* 7 bits used */ + int event; /* alternate interface to events */ + int wheel; /* - for negative, 0 for none, + for positive */ + unsigned char dump_state; /* 0 if disabled 1 if enabled */ + unsigned char enable; /* 0 if disabled 1 if enabled */ + unsigned char offline; /* if the device is out of range or asleep */ + unsigned char compress_wheel; /* flag to compress wheel events */ + unsigned char light; /* 7 bits used */ unsigned char last_cmd[8]; unsigned char last_input[8]; - unsigned char screen[40]; // We'll also have cells + unsigned char screen[40]; /* We'll also have cells */ }; @@ -205,27 +193,30 @@ static void usb_tranzport_abort_transfers(struct usb_tranzport *dev) usb_kill_urb(dev->interrupt_out_urb); } -// FIXME ~light not good enough or correct - need atomic set_bit - -#define show_set_light(value) \ -static ssize_t show_##value(struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - struct usb_interface *intf = to_usb_interface(dev); \ - struct usb_tranzport *t = usb_get_intfdata(intf); \ - enum LightID light = value; \ - int temp = (1 && (t->light & (1 << light))); \ - return sprintf(buf, "%d\n", temp ); \ -} \ -static ssize_t set_##value(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) \ -{ \ - struct usb_interface *intf = to_usb_interface(dev); \ - struct usb_tranzport *t = usb_get_intfdata(intf); \ - int temp = simple_strtoul(buf, NULL, 10); \ - enum LightID light = (temp << value) & (t->light << value); \ - t->light = (t->light & ~light) ; \ - return count; \ -} \ -static DEVICE_ATTR(value, S_IWUGO | S_IRUGO, show_##value, set_##value); +/* FIXME ~light not good enough or correct - need atomic set_bit */ + +#define show_set_light(value) \ + static ssize_t show_##value( \ + struct device *dev, struct device_attribute *attr, char *buf) \ + { \ + struct usb_interface *intf = to_usb_interface(dev); \ + struct usb_tranzport *t = usb_get_intfdata(intf); \ + enum LightID light = value; \ + int temp = (1 && (t->light & (1 << light))); \ + return sprintf(buf, "%d\n", temp); \ + } \ + static ssize_t set_##value( \ + struct device *dev, struct device_attribute *attr, \ + const char *buf, size_t count) \ + { \ + struct usb_interface *intf = to_usb_interface(dev); \ + struct usb_tranzport *t = usb_get_intfdata(intf); \ + int temp = simple_strtoul(buf, NULL, 10); \ + enum LightID light = (temp << value) & (t->light << value); \ + t->light = (t->light & ~light) ; \ + return count; \ + } \ + static DEVICE_ATTR(value, S_IWUGO | S_IRUGO, show_##value, set_##value); show_set_light(LightRecord); show_set_light(LightTrackrec); @@ -235,25 +226,25 @@ show_set_light(LightAnysolo); show_set_light(LightLoop); show_set_light(LightPunch); - -#define show_set_int(value) \ -static ssize_t show_##value(struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - struct usb_interface *intf = to_usb_interface(dev); \ - struct usb_tranzport *t = usb_get_intfdata(intf); \ - \ - return sprintf(buf, "%d\n", t->value); \ -} \ -static ssize_t set_##value(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) \ -{ \ - struct usb_interface *intf = to_usb_interface(dev); \ - struct usb_tranzport *t = usb_get_intfdata(intf); \ - int temp = simple_strtoul(buf, NULL, 10); \ - \ - t->value = temp; \ - return count; \ -} \ -static DEVICE_ATTR(value, S_IWUGO | S_IRUGO, show_##value, set_##value); +#define show_set_int(value) \ + static ssize_t show_##value(struct device *dev, \ + struct device_attribute *attr, char *buf) \ + { \ + struct usb_interface *intf = to_usb_interface(dev); \ + struct usb_tranzport *t = usb_get_intfdata(intf); \ + return sprintf(buf, "%d\n", t->value); \ + } \ + static ssize_t set_##value(struct device *dev, \ + struct device_attribute *attr, \ + const char *buf, size_t count) \ + { \ + struct usb_interface *intf = to_usb_interface(dev); \ + struct usb_tranzport *t = usb_get_intfdata(intf); \ + int temp = simple_strtoul(buf, NULL, 10); \ + t->value = temp; \ + return count; \ + } \ + static DEVICE_ATTR(value, S_IWUGO | S_IRUGO, show_##value, set_##value); show_set_int(enable); show_set_int(offline); @@ -262,27 +253,27 @@ show_set_int(dump_state); show_set_int(wheel); show_set_int(event); -#define show_set_cmd(value) \ -static ssize_t show_##value(struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - struct usb_interface *intf = to_usb_interface(dev); \ - struct usb_tranzport *t = usb_get_intfdata(intf); \ +#define show_set_cmd(value) \ + static ssize_t show_##value(struct device *dev, \ + struct device_attribute *attr, char *buf) \ + { \ + struct usb_interface *intf = to_usb_interface(dev); \ + struct usb_tranzport *t = usb_get_intfdata(intf); \ \ - return sprintf(buf, "%d\n", t->value); \ -} \ -static ssize_t set_##value(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) \ -{ \ - struct usb_interface *intf = to_usb_interface(dev); \ - struct usb_tranzport *t = usb_get_intfdata(intf); \ - int temp = simple_strtoul(buf, NULL, 10); \ + return sprintf(buf, "%d\n", t->value); \ + } \ + static ssize_t set_##value(struct device *dev, \ + struct device_attribute *attr, \ + const char *buf, size_t count) \ + { \ + struct usb_interface *intf = to_usb_interface(dev); \ + struct usb_tranzport *t = usb_get_intfdata(intf); \ + int temp = simple_strtoul(buf, NULL, 10); \ \ - t->value = temp; \ - return count; \ -} \ -static DEVICE_ATTR(value, S_IWUGO | S_IRUGO, show_##value, set_##value); - - - + t->value = temp; \ + return count; \ + } \ + static DEVICE_ATTR(value, S_IWUGO | S_IRUGO, show_##value, set_##value); /** * usb_tranzport_delete @@ -291,22 +282,21 @@ static void usb_tranzport_delete(struct usb_tranzport *dev) { usb_tranzport_abort_transfers(dev); /* This is just too twisted to be correct */ - if(dev->intf != NULL) { - device_remove_file(&dev->intf->dev, &dev_attr_LightRecord); - device_remove_file(&dev->intf->dev, &dev_attr_LightTrackrec); - device_remove_file(&dev->intf->dev, &dev_attr_LightTrackmute); - device_remove_file(&dev->intf->dev, &dev_attr_LightTracksolo); - device_remove_file(&dev->intf->dev, &dev_attr_LightTrackmute); - device_remove_file(&dev->intf->dev, &dev_attr_LightAnysolo); - device_remove_file(&dev->intf->dev, &dev_attr_LightLoop); - device_remove_file(&dev->intf->dev, &dev_attr_LightPunch); - device_remove_file(&dev->intf->dev, &dev_attr_wheel); - device_remove_file(&dev->intf->dev, &dev_attr_enable); - device_remove_file(&dev->intf->dev, &dev_attr_event); - device_remove_file(&dev->intf->dev, &dev_attr_offline); - device_remove_file(&dev->intf->dev, &dev_attr_compress_wheel); - - device_remove_file(&dev->intf->dev, &dev_attr_dump_state); + if (dev->intf != NULL) { + device_remove_file(&dev->intf->dev, &dev_attr_LightRecord); + device_remove_file(&dev->intf->dev, &dev_attr_LightTrackrec); + device_remove_file(&dev->intf->dev, &dev_attr_LightTrackmute); + device_remove_file(&dev->intf->dev, &dev_attr_LightTracksolo); + device_remove_file(&dev->intf->dev, &dev_attr_LightTrackmute); + device_remove_file(&dev->intf->dev, &dev_attr_LightAnysolo); + device_remove_file(&dev->intf->dev, &dev_attr_LightLoop); + device_remove_file(&dev->intf->dev, &dev_attr_LightPunch); + device_remove_file(&dev->intf->dev, &dev_attr_wheel); + device_remove_file(&dev->intf->dev, &dev_attr_enable); + device_remove_file(&dev->intf->dev, &dev_attr_event); + device_remove_file(&dev->intf->dev, &dev_attr_offline); + device_remove_file(&dev->intf->dev, &dev_attr_compress_wheel); + device_remove_file(&dev->intf->dev, &dev_attr_dump_state); } /* free data structures */ @@ -330,37 +320,56 @@ static void usb_tranzport_interrupt_in_callback(struct urb *urb) if (urb->status) { if (urb->status == -ENOENT || - urb->status == -ECONNRESET || - urb->status == -ESHUTDOWN) { + urb->status == -ECONNRESET || + urb->status == -ESHUTDOWN) { goto exit; } else { - dbg_info(&dev->intf->dev, "%s: nonzero status received: %d\n", + dbg_info(&dev->intf->dev, + "%s: nonzero status received: %d\n", __func__, urb->status); - goto resubmit; /* maybe we can recover */ + goto resubmit; /* maybe we can recover */ } } if (urb->actual_length != 8) { dev_warn(&dev->intf->dev, - "Urb length was %d bytes!! Do something intelligent \n", urb->actual_length); + "Urb length was %d bytes!!" + "Do something intelligent \n", + urb->actual_length); } else { - dbg_info(&dev->intf->dev, "%s: received: %02x%02x%02x%02x%02x%02x%02x%02x\n", - __func__, dev->interrupt_in_buffer[0],dev->interrupt_in_buffer[1],dev->interrupt_in_buffer[2],dev->interrupt_in_buffer[3],dev->interrupt_in_buffer[4],dev->interrupt_in_buffer[5],dev->interrupt_in_buffer[6],dev->interrupt_in_buffer[7]); + dbg_info(&dev->intf->dev, + "%s: received: %02x%02x%02x%02x%02x%02x%02x%02x\n", + __func__, dev->interrupt_in_buffer[0], + dev->interrupt_in_buffer[1], + dev->interrupt_in_buffer[2], + dev->interrupt_in_buffer[3], + dev->interrupt_in_buffer[4], + dev->interrupt_in_buffer[5], + dev->interrupt_in_buffer[6], + dev->interrupt_in_buffer[7]); #if SUPPRESS_EXTRA_OFFLINE_EVENTS - if(dev->offline == 2 && dev->interrupt_in_buffer[1] == 0xff) { goto resubmit; } - if(dev->offline == 1 && dev->interrupt_in_buffer[1] == 0xff) { dev->offline = 2; goto resubmit; } + if (dev->offline == 2 && dev->interrupt_in_buffer[1] == 0xff) + goto resubmit; + if (dev->offline == 1 && dev->interrupt_in_buffer[1] == 0xff) { + dev->offline = 2; + goto resubmit; + } -/* Always pass one offline event up the stack */ - if(dev->offline > 0 && dev->interrupt_in_buffer[1] != 0xff) { dev->offline = 0; } - if(dev->offline == 0 && dev->interrupt_in_buffer[1] == 0xff) { dev->offline = 1; } + /* Always pass one offline event up the stack */ + if (dev->offline > 0 && dev->interrupt_in_buffer[1] != 0xff) + dev->offline = 0; + if (dev->offline == 0 && dev->interrupt_in_buffer[1] == 0xff) + dev->offline = 1; -#endif - dbg_info(&dev->intf->dev, "%s: head, tail are %x, %x\n", __func__,dev->ring_head,dev->ring_tail); +#endif /* SUPPRESS_EXTRA_OFFLINE_EVENTS */ + dbg_info(&dev->intf->dev, "%s: head, tail are %x, %x\n", + __func__, dev->ring_head, dev->ring_tail); - next_ring_head = (dev->ring_head+1) % ring_buffer_size; + next_ring_head = (dev->ring_head + 1) % ring_buffer_size; if (next_ring_head != dev->ring_tail) { - memcpy(&((*dev->ring_buffer)[dev->ring_head]), dev->interrupt_in_buffer, urb->actual_length); + memcpy(&((*dev->ring_buffer)[dev->ring_head]), + dev->interrupt_in_buffer, urb->actual_length); dev->ring_head = next_ring_head; retval = 0; memset(dev->interrupt_in_buffer, 0, urb->actual_length); @@ -373,7 +382,7 @@ static void usb_tranzport_interrupt_in_callback(struct urb *urb) } resubmit: - /* resubmit if we're still running */ +/* resubmit if we're still running */ if (dev->interrupt_in_running && dev->intf) { retval = usb_submit_urb(dev->interrupt_in_urb, GFP_ATOMIC); if (retval) @@ -392,19 +401,17 @@ exit: static void usb_tranzport_interrupt_out_callback(struct urb *urb) { struct usb_tranzport *dev = urb->context; - /* sync/async unlink faults aren't errors */ if (urb->status && !(urb->status == -ENOENT || - urb->status == -ECONNRESET || - urb->status == -ESHUTDOWN)) + urb->status == -ECONNRESET || + urb->status == -ESHUTDOWN)) dbg_info(&dev->intf->dev, - "%s - nonzero write interrupt status received: %d\n", - __func__, urb->status); + "%s - nonzero write interrupt status received: %d\n", + __func__, urb->status); dev->interrupt_out_busy = 0; wake_up_interruptible(&dev->write_wait); } - /** * usb_tranzport_open */ @@ -424,7 +431,7 @@ static int usb_tranzport_open(struct inode *inode, struct file *file) if (!interface) { err("%s - error, can't find device for minor %d\n", - __func__, subminor); + __func__, subminor); retval = -ENODEV; goto unlock_disconnect_exit; } @@ -453,14 +460,14 @@ static int usb_tranzport_open(struct inode *inode, struct file *file) dev->ring_head = 0; dev->ring_tail = 0; usb_fill_int_urb(dev->interrupt_in_urb, - interface_to_usbdev(interface), - usb_rcvintpipe(interface_to_usbdev(interface), - dev->interrupt_in_endpoint->bEndpointAddress), - dev->interrupt_in_buffer, - dev->interrupt_in_endpoint_size, - usb_tranzport_interrupt_in_callback, - dev, - dev->interrupt_in_interval); + interface_to_usbdev(interface), + usb_rcvintpipe(interface_to_usbdev(interface), + dev->interrupt_in_endpoint-> + bEndpointAddress), + dev->interrupt_in_buffer, + dev->interrupt_in_endpoint_size, + usb_tranzport_interrupt_in_callback, dev, + dev->interrupt_in_interval); dev->interrupt_in_running = 1; dev->interrupt_in_done = 0; @@ -470,7 +477,8 @@ static int usb_tranzport_open(struct inode *inode, struct file *file) retval = usb_submit_urb(dev->interrupt_in_urb, GFP_KERNEL); if (retval) { - dev_err(&interface->dev, "Couldn't submit interrupt_in_urb %d\n", retval); + dev_err(&interface->dev, + "Couldn't submit interrupt_in_urb %d\n", retval); dev->interrupt_in_running = 0; dev->open_count = 0; goto unlock_exit; @@ -479,7 +487,6 @@ static int usb_tranzport_open(struct inode *inode, struct file *file) /* save device in the file's private structure */ file->private_data = dev; - unlock_exit: up(&dev->sem); @@ -525,7 +532,9 @@ static int usb_tranzport_release(struct inode *inode, struct file *file) /* wait until write transfer is finished */ if (dev->interrupt_out_busy) - wait_event_interruptible_timeout(dev->write_wait, !dev->interrupt_out_busy, 2 * HZ); + wait_event_interruptible_timeout(dev->write_wait, + !dev->interrupt_out_busy, + 2 * HZ); usb_tranzport_abort_transfers(dev); dev->open_count = 0; @@ -539,37 +548,31 @@ exit: /** * usb_tranzport_poll */ -static unsigned int usb_tranzport_poll(struct file *file, poll_table *wait) +static unsigned int usb_tranzport_poll(struct file *file, poll_table * wait) { struct usb_tranzport *dev; unsigned int mask = 0; - dev = file->private_data; - poll_wait(file, &dev->read_wait, wait); poll_wait(file, &dev->write_wait, wait); - if (dev->ring_head != dev->ring_tail) mask |= POLLIN | POLLRDNORM; if (!dev->interrupt_out_busy) mask |= POLLOUT | POLLWRNORM; - return mask; } - /** * usb_tranzport_read */ -static ssize_t usb_tranzport_read(struct file *file, char __user *buffer, size_t count, - loff_t *ppos) + +static ssize_t usb_tranzport_read(struct file *file, char __user *buffer, + size_t count, loff_t *ppos) { struct usb_tranzport *dev; int retval = 0; - #if BUFFERED_READS int c = 0; #endif - #if COMPRESS_WHEEL_EVENTS signed char oldwheel; signed char newwheel; @@ -577,7 +580,7 @@ static ssize_t usb_tranzport_read(struct file *file, char __user *buffer, size_t int next_tail; #endif -/* do I have such a thing as a null event? */ + /* do I have such a thing as a null event? */ dev = file->private_data; @@ -591,8 +594,7 @@ static ssize_t usb_tranzport_read(struct file *file, char __user *buffer, size_t goto exit; } - /* verify that the device wasn't unplugged */ - if (dev->intf == NULL) { + /* verify that the device wasn't unplugged */ if (dev->intf == NULL) { retval = -ENODEV; err("No device or device unplugged %d\n", retval); goto unlock_exit; @@ -604,104 +606,149 @@ static ssize_t usb_tranzport_read(struct file *file, char __user *buffer, size_t retval = -EAGAIN; goto unlock_exit; } - // atomic_cmp_exchange(&dev->interrupt_in_done,0,0); - dev->interrupt_in_done = 0 ; /* tiny race - FIXME: make atomic? */ - retval = wait_event_interruptible(dev->read_wait, dev->interrupt_in_done); - if (retval < 0) { + /* tiny race - FIXME: make atomic? */ + /* atomic_cmp_exchange(&dev->interrupt_in_done,0,0); */ + dev->interrupt_in_done = 0; + retval = wait_event_interruptible(dev->read_wait, + dev->interrupt_in_done); + if (retval < 0) goto unlock_exit; - } } - dbg_info(&dev->intf->dev, "%s: copying to userspace: %02x%02x%02x%02x%02x%02x%02x%02x\n", - __func__, (*dev->ring_buffer)[dev->ring_tail].cmd[0],(*dev->ring_buffer)[dev->ring_tail].cmd[1],(*dev->ring_buffer)[dev->ring_tail].cmd[2],(*dev->ring_buffer)[dev->ring_tail].cmd[3],(*dev->ring_buffer)[dev->ring_tail].cmd[4],(*dev->ring_buffer)[dev->ring_tail].cmd[5],(*dev->ring_buffer)[dev->ring_tail].cmd[6],(*dev->ring_buffer)[dev->ring_tail].cmd[7]); + dbg_info(&dev->intf->dev, + "%s: copying to userspace: " + "%02x%02x%02x%02x%02x%02x%02x%02x\n", + __func__, + (*dev->ring_buffer)[dev->ring_tail].cmd[0], + (*dev->ring_buffer)[dev->ring_tail].cmd[1], + (*dev->ring_buffer)[dev->ring_tail].cmd[2], + (*dev->ring_buffer)[dev->ring_tail].cmd[3], + (*dev->ring_buffer)[dev->ring_tail].cmd[4], + (*dev->ring_buffer)[dev->ring_tail].cmd[5], + (*dev->ring_buffer)[dev->ring_tail].cmd[6], + (*dev->ring_buffer)[dev->ring_tail].cmd[7]); #if BUFFERED_READS - c = 0; - while((c < count) && (dev->ring_tail != dev->ring_head)) { + c = 0; + while ((c < count) && (dev->ring_tail != dev->ring_head)) { -/* This started off in the lower level service routine, and I moved it here. Then my brain died. Not done yet. */ #if COMPRESS_WHEEL_EVENTS next_tail = (dev->ring_tail+1) % ring_buffer_size; - if(dev->compress_wheel) cancompress = 1; - while(dev->ring_head != next_tail && cancompress == 1 ) { + if (dev->compress_wheel) + cancompress = 1; + while (dev->ring_head != next_tail && cancompress == 1) { newwheel = (*dev->ring_buffer)[next_tail].cmd[6]; oldwheel = (*dev->ring_buffer)[dev->ring_tail].cmd[6]; - // if both are wheel events, and no buttons have changes (FIXME, do I have to check?), - // and we are the same sign, we can compress +- 7F - // FIXME: saner check for overflow! - max of +- 7F - // FIXME the math is wrong for going in reverse, actually, as the midi spec doesn't allow signed chars - - dbg_info(&dev->intf->dev, "%s: trying to compress: %02x%02x%02x%02x%02x %02x %02x %02x\n", - __func__, (*dev->ring_buffer)[dev->ring_tail].cmd[0],(*dev->ring_buffer)[dev->ring_tail].cmd[1],(*dev->ring_buffer)[dev->ring_tail].cmd[2],(*dev->ring_buffer)[dev->ring_tail].cmd[3],(*dev->ring_buffer)[dev->ring_tail].cmd[4],(*dev->ring_buffer)[dev->ring_tail].cmd[5],(*dev->ring_buffer)[dev->ring_tail].cmd[6],(*dev->ring_buffer)[dev->ring_tail].cmd[7]); - - - if(((*dev->ring_buffer)[dev->ring_tail].cmd[6] != 0 && - (*dev->ring_buffer)[next_tail].cmd[6] != 0 ) && + /* if both are wheel events, and + no buttons have changes (FIXME, do I have to check?), + and we are the same sign, we can compress +- 7F + */ + dbg_info(&dev->intf->dev, + "%s: trying to compress: " + "%02x%02x%02x%02x%02x%02x%02x%02x\n", + __func__, + (*dev->ring_buffer)[dev->ring_tail].cmd[0], + (*dev->ring_buffer)[dev->ring_tail].cmd[1], + (*dev->ring_buffer)[dev->ring_tail].cmd[2], + (*dev->ring_buffer)[dev->ring_tail].cmd[3], + (*dev->ring_buffer)[dev->ring_tail].cmd[4], + (*dev->ring_buffer)[dev->ring_tail].cmd[5], + (*dev->ring_buffer)[dev->ring_tail].cmd[6], + (*dev->ring_buffer)[dev->ring_tail].cmd[7]); + + if (((*dev->ring_buffer)[dev->ring_tail].cmd[6] != 0 && + (*dev->ring_buffer)[next_tail].cmd[6] != 0) && ((newwheel > 0 && oldwheel > 0) || - (newwheel < 0 && oldwheel < 0)) && - ((*dev->ring_buffer)[dev->ring_tail].cmd[2] == (*dev->ring_buffer)[next_tail].cmd[2]) && - ((*dev->ring_buffer)[dev->ring_tail].cmd[3] == (*dev->ring_buffer)[next_tail].cmd[3]) && - ((*dev->ring_buffer)[dev->ring_tail].cmd[4] == (*dev->ring_buffer)[next_tail].cmd[4]) && - ((*dev->ring_buffer)[dev->ring_tail].cmd[5] == (*dev->ring_buffer)[next_tail].cmd[5])) - { - dbg_info(&dev->intf->dev, "%s: should compress: %02x%02x%02x%02x%02x%02x%02x%02x\n", - __func__, (*dev->ring_buffer)[dev->ring_tail].cmd[0],(*dev->ring_buffer)[dev->ring_tail].cmd[1],(*dev->ring_buffer)[dev->ring_tail].cmd[2],(*dev->ring_buffer)[dev->ring_tail].cmd[3],(*dev->ring_buffer)[dev->ring_tail].cmd[4],(*dev->ring_buffer)[dev->ring_tail].cmd[5],(*dev->ring_buffer)[dev->ring_tail].cmd[6],(*dev->ring_buffer)[dev->ring_tail].cmd[7]); - + (newwheel < 0 && oldwheel < 0)) && + ((*dev->ring_buffer)[dev->ring_tail].cmd[2] == + (*dev->ring_buffer)[next_tail].cmd[2]) && + ((*dev->ring_buffer)[dev->ring_tail].cmd[3] == + (*dev->ring_buffer)[next_tail].cmd[3]) && + ((*dev->ring_buffer)[dev->ring_tail].cmd[4] == + (*dev->ring_buffer)[next_tail].cmd[4]) && + ((*dev->ring_buffer)[dev->ring_tail].cmd[5] == + (*dev->ring_buffer)[next_tail].cmd[5])) { + dbg_info(&dev->intf->dev, + "%s: should compress: " + "%02x%02x%02x%02x%02x%02x%02x%02x\n", + __func__, + (*dev->ring_buffer)[dev->ring_tail]. + cmd[0], + (*dev->ring_buffer)[dev->ring_tail]. + cmd[1], + (*dev->ring_buffer)[dev->ring_tail]. + cmd[2], + (*dev->ring_buffer)[dev->ring_tail]. + cmd[3], + (*dev->ring_buffer)[dev->ring_tail]. + cmd[4], + (*dev->ring_buffer)[dev->ring_tail]. + cmd[5], + (*dev->ring_buffer)[dev->ring_tail]. + cmd[6], + (*dev->ring_buffer)[dev->ring_tail]. + cmd[7]); newwheel += oldwheel; - if(oldwheel > 0 && !(newwheel > 0)) { + if (oldwheel > 0 && !(newwheel > 0)) { newwheel = 0x7f; cancompress = 0; } - if(oldwheel < 0 && !(newwheel < 0)) { + if (oldwheel < 0 && !(newwheel < 0)) { newwheel = 0x80; cancompress = 0; } - (*dev->ring_buffer)[next_tail].cmd[6] = newwheel; + (*dev->ring_buffer)[next_tail].cmd[6] = + newwheel; dev->ring_tail = next_tail; - next_tail = (dev->ring_tail+1) % ring_buffer_size; + next_tail = + (dev->ring_tail + 1) % ring_buffer_size; } else { cancompress = 0; } } #endif /* COMPRESS_WHEEL_EVENTS */ - - if (copy_to_user(&buffer[c], &(*dev->ring_buffer)[dev->ring_tail], 8)) { + if (copy_to_user( + &buffer[c], + &(*dev->ring_buffer)[dev->ring_tail], 8)) { retval = -EFAULT; goto unlock_exit; } - - dev->ring_tail = (dev->ring_tail+1) % ring_buffer_size; - c+=8; - dbg_info(&dev->intf->dev, "%s: head, tail are %x, %x\n", __func__,dev->ring_head,dev->ring_tail); - } - retval = c; + dev->ring_tail = (dev->ring_tail + 1) % ring_buffer_size; + c += 8; + dbg_info(&dev->intf->dev, + "%s: head, tail are %x, %x\n", + __func__, dev->ring_head, dev->ring_tail); + } + retval = c; #else - if (copy_to_user(buffer, &(*dev->ring_buffer)[dev->ring_tail], 8)) { - retval = -EFAULT; - goto unlock_exit; - } +/* if (copy_to_user(buffer, &(*dev->ring_buffer)[dev->ring_tail], 8)) { */ + retval = -EFAULT; + goto unlock_exit; +} - dev->ring_tail = (dev->ring_tail+1) % ring_buffer_size; - dbg_info(&dev->intf->dev, "%s: head, tail are %x, %x\n", __func__,dev->ring_head,dev->ring_tail); +dev->ring_tail = (dev->ring_tail + 1) % ring_buffer_size; +dbg_info(&dev->intf->dev, "%s: head, tail are %x, %x\n", + __func__, dev->ring_head, dev->ring_tail); - retval = 8; +retval = 8; #endif /* BUFFERED_READS */ unlock_exit: - /* unlock the device */ - up(&dev->sem); +/* unlock the device */ +up(&dev->sem); exit: - return retval; +return retval; } /** * usb_tranzport_write */ -static ssize_t usb_tranzport_write(struct file *file, const char __user *buffer, - size_t count, loff_t *ppos) +static ssize_t usb_tranzport_write(struct file *file, + const char __user *buffer, size_t count, + loff_t *ppos) { struct usb_tranzport *dev; size_t bytes_to_write; @@ -718,7 +765,6 @@ static ssize_t usb_tranzport_write(struct file *file, const char __user *buffer, retval = -ERESTARTSYS; goto exit; } - /* verify that the device wasn't unplugged */ if (dev->intf == NULL) { retval = -ENODEV; @@ -732,18 +778,24 @@ static ssize_t usb_tranzport_write(struct file *file, const char __user *buffer, retval = -EAGAIN; goto unlock_exit; } - retval = wait_event_interruptible(dev->write_wait, !dev->interrupt_out_busy); - if (retval < 0) { + retval = wait_event_interruptible(dev->write_wait, + !dev->interrupt_out_busy); + if (retval < 0) goto unlock_exit; - } } /* write the data into interrupt_out_buffer from userspace */ - bytes_to_write = min(count, write_buffer_size*dev->interrupt_out_endpoint_size); + bytes_to_write = min(count, + write_buffer_size * + dev->interrupt_out_endpoint_size); if (bytes_to_write < count) - dev_warn(&dev->intf->dev, "Write buffer overflow, %zd bytes dropped\n",count-bytes_to_write); + dev_warn(&dev->intf->dev, + "Write buffer overflow, %zd bytes dropped\n", + count - bytes_to_write); - dbg_info(&dev->intf->dev, "%s: count = %zd, bytes_to_write = %zd\n", __func__, count, bytes_to_write); + dbg_info(&dev->intf->dev, + "%s: count = %zd, bytes_to_write = %zd\n", __func__, + count, bytes_to_write); if (copy_from_user(dev->interrupt_out_buffer, buffer, bytes_to_write)) { retval = -EFAULT; @@ -757,14 +809,13 @@ static ssize_t usb_tranzport_write(struct file *file, const char __user *buffer, /* send off the urb */ usb_fill_int_urb(dev->interrupt_out_urb, - interface_to_usbdev(dev->intf), - usb_sndintpipe(interface_to_usbdev(dev->intf), - dev->interrupt_out_endpoint->bEndpointAddress), - dev->interrupt_out_buffer, - bytes_to_write, - usb_tranzport_interrupt_out_callback, - dev, - dev->interrupt_out_interval); + interface_to_usbdev(dev->intf), + usb_sndintpipe(interface_to_usbdev(dev->intf), + dev->interrupt_out_endpoint-> + bEndpointAddress), + dev->interrupt_out_buffer, bytes_to_write, + usb_tranzport_interrupt_out_callback, dev, + dev->interrupt_out_interval); dev->interrupt_out_busy = 1; wmb(); @@ -787,12 +838,12 @@ exit: /* file operations needed when we register this driver */ static const struct file_operations usb_tranzport_fops = { - .owner = THIS_MODULE, - .read = usb_tranzport_read, - .write = usb_tranzport_write, - .open = usb_tranzport_open, - .release = usb_tranzport_release, - .poll = usb_tranzport_poll, + .owner = THIS_MODULE, + .read = usb_tranzport_read, + .write = usb_tranzport_write, + .open = usb_tranzport_open, + .release = usb_tranzport_release, + .poll = usb_tranzport_poll, }; /* @@ -800,20 +851,19 @@ static const struct file_operations usb_tranzport_fops = { * and to have the device registered with the driver core */ static struct usb_class_driver usb_tranzport_class = { - .name = "tranzport%d", - .fops = &usb_tranzport_fops, - .minor_base = USB_TRANZPORT_MINOR_BASE, + .name = "tranzport%d", + .fops = &usb_tranzport_fops, + .minor_base = USB_TRANZPORT_MINOR_BASE, }; - /** * usb_tranzport_probe * * Called by the usb core when a new device is connected that it thinks * this driver might be interested in. */ -static int usb_tranzport_probe(struct usb_interface *intf, const struct usb_device_id *id) -{ +static int usb_tranzport_probe(struct usb_interface *intf, + const struct usb_device_id *id) { struct usb_device *udev = interface_to_usbdev(intf); struct usb_tranzport *dev = NULL; struct usb_host_interface *iface_desc; @@ -824,7 +874,7 @@ static int usb_tranzport_probe(struct usb_interface *intf, const struct usb_devi /* allocate memory for our device state and intialize it */ - dev = kzalloc(sizeof(*dev), GFP_KERNEL); + dev = kzalloc(sizeof(*dev), GFP_KERNEL); if (dev == NULL) { dev_err(&intf->dev, "Out of memory\n"); goto exit; @@ -851,25 +901,33 @@ static int usb_tranzport_probe(struct usb_interface *intf, const struct usb_devi goto error; } if (dev->interrupt_out_endpoint == NULL) - dev_warn(&intf->dev, "Interrupt out endpoint not found (using control endpoint instead)\n"); - + dev_warn(&intf->dev, + "Interrupt out endpoint not found" + "(using control endpoint instead)\n"); - dev->interrupt_in_endpoint_size = le16_to_cpu(dev->interrupt_in_endpoint->wMaxPacketSize); + dev->interrupt_in_endpoint_size = + le16_to_cpu(dev->interrupt_in_endpoint->wMaxPacketSize); if (dev->interrupt_in_endpoint_size != 8) - dev_warn(&intf->dev, "Interrupt in endpoint size is not 8!\n"); + dev_warn(&intf->dev, "Interrupt in endpoint size is not 8!\n"); - if(ring_buffer_size == 0) { ring_buffer_size = RING_BUFFER_SIZE; } - true_size = min(ring_buffer_size,RING_BUFFER_SIZE); - /* FIXME - there are more usb_alloc routines for dma correctness. Needed? */ + if (ring_buffer_size == 0) + ring_buffer_size = RING_BUFFER_SIZE; + true_size = min(ring_buffer_size, RING_BUFFER_SIZE); - dev->ring_buffer = kmalloc((true_size*sizeof(struct tranzport_cmd))+8, GFP_KERNEL); + /* FIXME - there are more usb_alloc routines for dma correctness. + Needed? */ + + dev->ring_buffer = + kmalloc((true_size * sizeof(struct tranzport_cmd)) + 8, GFP_KERNEL); if (!dev->ring_buffer) { - dev_err(&intf->dev, "Couldn't allocate ring_buffer of size %d\n",true_size); + dev_err(&intf->dev, + "Couldn't allocate ring_buffer size %d\n", true_size); goto error; } - dev->interrupt_in_buffer = kmalloc(dev->interrupt_in_endpoint_size, GFP_KERNEL); + dev->interrupt_in_buffer = + kmalloc(dev->interrupt_in_endpoint_size, GFP_KERNEL); if (!dev->interrupt_in_buffer) { dev_err(&intf->dev, "Couldn't allocate interrupt_in_buffer\n"); goto error; @@ -879,13 +937,18 @@ static int usb_tranzport_probe(struct usb_interface *intf, const struct usb_devi dev_err(&intf->dev, "Couldn't allocate interrupt_in_urb\n"); goto error; } - dev->interrupt_out_endpoint_size = dev->interrupt_out_endpoint ? le16_to_cpu(dev->interrupt_out_endpoint->wMaxPacketSize) : - udev->descriptor.bMaxPacketSize0; - - if (dev->interrupt_out_endpoint_size !=8) - dev_warn(&intf->dev, "Interrupt out endpoint size is not 8!)\n"); - - dev->interrupt_out_buffer = kmalloc(write_buffer_size*dev->interrupt_out_endpoint_size, GFP_KERNEL); + dev->interrupt_out_endpoint_size = + dev->interrupt_out_endpoint ? + le16_to_cpu(dev->interrupt_out_endpoint->wMaxPacketSize) : + udev->descriptor.bMaxPacketSize0; + + if (dev->interrupt_out_endpoint_size != 8) + dev_warn(&intf->dev, + "Interrupt out endpoint size is not 8!)\n"); + + dev->interrupt_out_buffer = + kmalloc(write_buffer_size * dev->interrupt_out_endpoint_size, + GFP_KERNEL); if (!dev->interrupt_out_buffer) { dev_err(&intf->dev, "Couldn't allocate interrupt_out_buffer\n"); goto error; @@ -895,9 +958,18 @@ static int usb_tranzport_probe(struct usb_interface *intf, const struct usb_devi dev_err(&intf->dev, "Couldn't allocate interrupt_out_urb\n"); goto error; } - dev->interrupt_in_interval = min_interrupt_in_interval > dev->interrupt_in_endpoint->bInterval ? min_interrupt_in_interval : dev->interrupt_in_endpoint->bInterval; - if (dev->interrupt_out_endpoint) - dev->interrupt_out_interval = min_interrupt_out_interval > dev->interrupt_out_endpoint->bInterval ? min_interrupt_out_interval : dev->interrupt_out_endpoint->bInterval; + dev->interrupt_in_interval = + min_interrupt_in_interval > + dev->interrupt_in_endpoint->bInterval ? min_interrupt_in_interval + : dev->interrupt_in_endpoint->bInterval; + + if (dev->interrupt_out_endpoint) { + dev->interrupt_out_interval = + min_interrupt_out_interval > + dev->interrupt_out_endpoint->bInterval ? + min_interrupt_out_interval : + dev->interrupt_out_endpoint->bInterval; + } /* we can register the device now, as it is ready */ usb_set_intfdata(intf, dev); @@ -905,35 +977,63 @@ static int usb_tranzport_probe(struct usb_interface *intf, const struct usb_devi retval = usb_register_dev(intf, &usb_tranzport_class); if (retval) { /* something prevented us from registering this driver */ - dev_err(&intf->dev, "Not able to get a minor for this device.\n"); + dev_err(&intf->dev, + "Not able to get a minor for this device.\n"); usb_set_intfdata(intf, NULL); goto error; } - if((retval = device_create_file(&intf->dev, &dev_attr_LightRecord))) goto error; - if((retval = device_create_file(&intf->dev, &dev_attr_LightTrackrec))) goto error; - if((retval = device_create_file(&intf->dev, &dev_attr_LightTrackmute))) goto error; - if((retval = device_create_file(&intf->dev, &dev_attr_LightTracksolo))) goto error; - if((retval = device_create_file(&intf->dev, &dev_attr_LightAnysolo))) goto error; - if((retval = device_create_file(&intf->dev, &dev_attr_LightLoop))) goto error; - if((retval = device_create_file(&intf->dev, &dev_attr_LightPunch))) goto error; - if((retval = device_create_file(&intf->dev, &dev_attr_wheel))) goto error; - if((retval = device_create_file(&intf->dev, &dev_attr_event))) goto error; - if((retval = device_create_file(&intf->dev, &dev_attr_dump_state))) goto error; - if((retval = device_create_file(&intf->dev, &dev_attr_compress_wheel))) goto error; - if((retval = device_create_file(&intf->dev, &dev_attr_enable))) goto error; - if((retval = device_create_file(&intf->dev, &dev_attr_offline))) goto error; + retval = device_create_file(&intf->dev, &dev_attr_LightRecord); + if (retval) + goto error; + retval = device_create_file(&intf->dev, &dev_attr_LightTrackrec); + if (retval) + goto error; + retval = device_create_file(&intf->dev, &dev_attr_LightTrackmute); + if (retval) + goto error; + retval = device_create_file(&intf->dev, &dev_attr_LightTracksolo); + if (retval) + goto error; + retval = device_create_file(&intf->dev, &dev_attr_LightAnysolo); + if (retval) + goto error; + retval = device_create_file(&intf->dev, &dev_attr_LightLoop); + if (retval) + goto error; + retval = device_create_file(&intf->dev, &dev_attr_LightPunch); + if (retval) + goto error; + retval = device_create_file(&intf->dev, &dev_attr_wheel); + if (retval) + goto error; + retval = device_create_file(&intf->dev, &dev_attr_event); + if (retval) + goto error; + retval = device_create_file(&intf->dev, &dev_attr_dump_state); + if (retval) + goto error; + retval = device_create_file(&intf->dev, &dev_attr_compress_wheel); + if (retval) + goto error; + retval = device_create_file(&intf->dev, &dev_attr_enable); + if (retval) + goto error; + retval = device_create_file(&intf->dev, &dev_attr_offline); + if (retval) + goto error; /* let the user know what node this device is now attached to */ - dev_info(&intf->dev, "Tranzport Device #%d now attached to major %d minor %d\n", - (intf->minor - USB_TRANZPORT_MINOR_BASE), USB_MAJOR, intf->minor); + dev_info(&intf->dev, + "Tranzport Device #%d now attached to major %d minor %d\n", + (intf->minor - USB_TRANZPORT_MINOR_BASE), USB_MAJOR, + intf->minor); exit: return retval; error: usb_tranzport_delete(dev); - return retval; } @@ -966,15 +1066,15 @@ static void usb_tranzport_disconnect(struct usb_interface *intf) mutex_unlock(&disconnect_mutex); dev_info(&intf->dev, "Tranzport Surface #%d now disconnected\n", - (minor - USB_TRANZPORT_MINOR_BASE)); + (minor - USB_TRANZPORT_MINOR_BASE)); } /* usb specific object needed to register this driver with the usb subsystem */ static struct usb_driver usb_tranzport_driver = { - .name = "tranzport", - .probe = usb_tranzport_probe, - .disconnect = usb_tranzport_disconnect, - .id_table = usb_tranzport_table, + .name = "tranzport", + .probe = usb_tranzport_probe, + .disconnect = usb_tranzport_disconnect, + .id_table = usb_tranzport_table, }; /** @@ -987,14 +1087,14 @@ static int __init usb_tranzport_init(void) /* register this driver with the USB subsystem */ retval = usb_register(&usb_tranzport_driver); if (retval) - err("usb_register failed for the "__FILE__" driver. Error number %d\n", retval); - + err("usb_register failed for the " __FILE__ + " driver. Error number %d\n", retval); return retval; } - /** * usb_tranzport_exit */ + static void __exit usb_tranzport_exit(void) { /* deregister this driver with the USB subsystem */ @@ -1003,4 +1103,3 @@ static void __exit usb_tranzport_exit(void) module_init(usb_tranzport_init); module_exit(usb_tranzport_exit); - -- 2.34.1