From 85443319989bb91814504608a6e11d880e156828 Mon Sep 17 00:00:00 2001 From: Brian Norris Date: Fri, 13 Jan 2012 18:11:49 -0800 Subject: [PATCH] mtd: nand: differentiate 1- vs. 2-byte writes when marking bad blocks It seems that we have developed a bad-block-marking "feature" out of pure laziness: "We write two bytes per location, so we dont have to mess with 16 bit access." It's relatively simple to write a 1 byte at a time on x8 devices and 2 bytes at a time on x16 devices, so let's do it. Signed-off-by: Brian Norris Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/nand/nand_base.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index 7855fd2d5c60..c6603d4b25c8 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -430,13 +430,17 @@ static int nand_default_block_markbad(struct mtd_info *mtd, loff_t ofs) /* * Write to first two pages if necessary. If we write to more * than one location, the first error encountered quits the - * procedure. We write two bytes per location, so we dont have - * to mess with 16 bit access. + * procedure. */ - ops.len = ops.ooblen = 2; ops.datbuf = NULL; ops.oobbuf = buf; - ops.ooboffs = chip->badblockpos & ~0x01; + ops.ooboffs = chip->badblockpos; + if (chip->options & NAND_BUSWIDTH_16) { + ops.ooboffs &= ~0x01; + ops.len = ops.ooblen = 2; + } else { + ops.len = ops.ooblen = 1; + } ops.mode = MTD_OPS_PLACE_OOB; do { ret = nand_do_write_oob(mtd, ofs, &ops); -- 2.34.1