From 876e7fb9f418fd86719af345febf8656c47e833c Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Mon, 16 Nov 2015 17:57:29 +0900 Subject: [PATCH] ARM: shmobile: r8a7794: alt: Enable VGA port Enable the DU device and the VGA port available on the r8a7794 ALT board. The VGA portion of the ALT board is somewhat similar to the Lager board but in case of ALT the DU1 pins are used and the X2 clock has a reduced frequency. This patch does not include any pinctrl (PFC) settings due to lack of PFC DT integration on r8a7794. At this point the default state of the boot loader is enough to keep the VGA port working without changing any pinctrl settings. Signed-off-by: Magnus Damm Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7794-alt.dts | 61 +++++++++++++++++++++++++++++++ 1 file changed, 61 insertions(+) diff --git a/arch/arm/boot/dts/r8a7794-alt.dts b/arch/arm/boot/dts/r8a7794-alt.dts index 928cfa641475..a548007b9b10 100644 --- a/arch/arm/boot/dts/r8a7794-alt.dts +++ b/arch/arm/boot/dts/r8a7794-alt.dts @@ -33,6 +33,67 @@ #address-cells = <1>; #size-cells = <1>; }; + + vga-encoder { + compatible = "adi,adv7123"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7123_in: endpoint { + remote-endpoint = <&du_out_rgb1>; + }; + }; + port@1 { + reg = <1>; + adv7123_out: endpoint { + remote-endpoint = <&vga_in>; + }; + }; + }; + }; + + vga { + compatible = "vga-connector"; + + port { + vga_in: endpoint { + remote-endpoint = <&adv7123_out>; + }; + }; + }; + + x2_clk: x2-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <74250000>; + }; + + x13_clk: x13-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <148500000>; + }; +}; + +&du { + status = "okay"; + + clocks = <&mstp7_clks R8A7794_CLK_DU0>, + <&mstp7_clks R8A7794_CLK_DU0>, + <&x13_clk>, <&x2_clk>; + clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1"; + + ports { + port@1 { + endpoint { + remote-endpoint = <&adv7123_in>; + }; + }; + }; }; &extal_clk { -- 2.34.1