From 8961def56845593f22ce85474e428f6e4892fdd3 Mon Sep 17 00:00:00 2001 From: Srikanth Thokala Date: Wed, 20 Aug 2014 21:56:02 +0530 Subject: [PATCH] PCI: xilinx: Add Xilinx AXI PCIe Host Bridge IP driver This is the driver for Xilinx AXI PCIe Host Bridge Soft IP. [bhelgaas: minor whitespace fixes] Signed-off-by: Srikanth Thokala Signed-off-by: Bjorn Helgaas Acked-by: Arnd Bergmann --- .../devicetree/bindings/pci/xilinx-pcie.txt | 62 ++ drivers/pci/host/Kconfig | 7 + drivers/pci/host/Makefile | 1 + drivers/pci/host/pcie-xilinx.c | 970 ++++++++++++++++++ 4 files changed, 1040 insertions(+) create mode 100644 Documentation/devicetree/bindings/pci/xilinx-pcie.txt create mode 100644 drivers/pci/host/pcie-xilinx.c diff --git a/Documentation/devicetree/bindings/pci/xilinx-pcie.txt b/Documentation/devicetree/bindings/pci/xilinx-pcie.txt new file mode 100644 index 000000000000..3e2c88d97ad4 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/xilinx-pcie.txt @@ -0,0 +1,62 @@ +* Xilinx AXI PCIe Root Port Bridge DT description + +Required properties: +- #address-cells: Address representation for root ports, set to <3> +- #size-cells: Size representation for root ports, set to <2> +- #interrupt-cells: specifies the number of cells needed to encode an + interrupt source. The value must be 1. +- compatible: Should contain "xlnx,axi-pcie-host-1.00.a" +- reg: Should contain AXI PCIe registers location and length +- device_type: must be "pci" +- interrupts: Should contain AXI PCIe interrupt +- interrupt-map-mask, + interrupt-map: standard PCI properties to define the mapping of the + PCI interface to interrupt numbers. +- ranges: ranges for the PCI memory regions (I/O space region is not + supported by hardware) + Please refer to the standard PCI bus binding document for a more + detailed explanation + +Optional properties: +- bus-range: PCI bus numbers covered + +Interrupt controller child node ++++++++++++++++++++++++++++++++ +Required properties: +- interrupt-controller: identifies the node as an interrupt controller +- #address-cells: specifies the number of cells needed to encode an + address. The value must be 0. +- #interrupt-cells: specifies the number of cells needed to encode an + interrupt source. The value must be 1. + +NOTE: +The core provides a single interrupt for both INTx/MSI messages. So, +created a interrupt controller node to support 'interrupt-map' DT +functionality. The driver will create an IRQ domain for this map, decode +the four INTx interrupts in ISR and route them to this domain. + + +Example: +++++++++ + + pci_express: axi-pcie@50000000 { + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + compatible = "xlnx,axi-pcie-host-1.00.a"; + reg = < 0x50000000 0x10000000 >; + device_type = "pci"; + interrupts = < 0 52 4 >; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_intc 1>, + <0 0 0 2 &pcie_intc 2>, + <0 0 0 3 &pcie_intc 3>, + <0 0 0 4 &pcie_intc 4>; + ranges = < 0x02000000 0 0x60000000 0x60000000 0 0x10000000 >; + + pcie_intc: interrupt-controller { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + } + }; diff --git a/drivers/pci/host/Kconfig b/drivers/pci/host/Kconfig index 8922c376456a..26bbaa5907e3 100644 --- a/drivers/pci/host/Kconfig +++ b/drivers/pci/host/Kconfig @@ -63,4 +63,11 @@ config PCIE_SPEAR13XX help Say Y here if you want PCIe support on SPEAr13XX SoCs. +config PCIE_XILINX + bool "Xilinx AXI PCIe host bridge support" + depends on ARCH_ZYNQ + help + Say 'Y' here if you want kernel to support the Xilinx AXI PCIe + Host Bridge driver. + endmenu diff --git a/drivers/pci/host/Makefile b/drivers/pci/host/Makefile index d0e88f114ff9..0677495d40f5 100644 --- a/drivers/pci/host/Makefile +++ b/drivers/pci/host/Makefile @@ -8,3 +8,4 @@ obj-$(CONFIG_PCI_RCAR_GEN2) += pci-rcar-gen2.o obj-$(CONFIG_PCI_RCAR_GEN2_PCIE) += pcie-rcar.o obj-$(CONFIG_PCI_HOST_GENERIC) += pci-host-generic.o obj-$(CONFIG_PCIE_SPEAR13XX) += pcie-spear13xx.o +obj-$(CONFIG_PCIE_XILINX) += pcie-xilinx.o diff --git a/drivers/pci/host/pcie-xilinx.c b/drivers/pci/host/pcie-xilinx.c new file mode 100644 index 000000000000..44f894493dca --- /dev/null +++ b/drivers/pci/host/pcie-xilinx.c @@ -0,0 +1,970 @@ +/* + * PCIe host controller driver for Xilinx AXI PCIe Bridge + * + * Copyright (c) 2012 - 2014 Xilinx, Inc. + * + * Based on the Tegra PCIe driver + * + * Bits taken from Synopsys Designware Host controller driver and + * ARM PCI Host generic driver. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* Register definitions */ +#define XILINX_PCIE_REG_BIR 0x00000130 +#define XILINX_PCIE_REG_IDR 0x00000138 +#define XILINX_PCIE_REG_IMR 0x0000013c +#define XILINX_PCIE_REG_PSCR 0x00000144 +#define XILINX_PCIE_REG_RPSC 0x00000148 +#define XILINX_PCIE_REG_MSIBASE1 0x0000014c +#define XILINX_PCIE_REG_MSIBASE2 0x00000150 +#define XILINX_PCIE_REG_RPEFR 0x00000154 +#define XILINX_PCIE_REG_RPIFR1 0x00000158 +#define XILINX_PCIE_REG_RPIFR2 0x0000015c + +/* Interrupt registers definitions */ +#define XILINX_PCIE_INTR_LINK_DOWN BIT(0) +#define XILINX_PCIE_INTR_ECRC_ERR BIT(1) +#define XILINX_PCIE_INTR_STR_ERR BIT(2) +#define XILINX_PCIE_INTR_HOT_RESET BIT(3) +#define XILINX_PCIE_INTR_CFG_TIMEOUT BIT(8) +#define XILINX_PCIE_INTR_CORRECTABLE BIT(9) +#define XILINX_PCIE_INTR_NONFATAL BIT(10) +#define XILINX_PCIE_INTR_FATAL BIT(11) +#define XILINX_PCIE_INTR_INTX BIT(16) +#define XILINX_PCIE_INTR_MSI BIT(17) +#define XILINX_PCIE_INTR_SLV_UNSUPP BIT(20) +#define XILINX_PCIE_INTR_SLV_UNEXP BIT(21) +#define XILINX_PCIE_INTR_SLV_COMPL BIT(22) +#define XILINX_PCIE_INTR_SLV_ERRP BIT(23) +#define XILINX_PCIE_INTR_SLV_CMPABT BIT(24) +#define XILINX_PCIE_INTR_SLV_ILLBUR BIT(25) +#define XILINX_PCIE_INTR_MST_DECERR BIT(26) +#define XILINX_PCIE_INTR_MST_SLVERR BIT(27) +#define XILINX_PCIE_INTR_MST_ERRP BIT(28) +#define XILINX_PCIE_IMR_ALL_MASK 0x1FF30FED +#define XILINX_PCIE_IDR_ALL_MASK 0xFFFFFFFF + +/* Root Port Error FIFO Read Register definitions */ +#define XILINX_PCIE_RPEFR_ERR_VALID BIT(18) +#define XILINX_PCIE_RPEFR_REQ_ID GENMASK(15, 0) +#define XILINX_PCIE_RPEFR_ALL_MASK 0xFFFFFFFF + +/* Root Port Interrupt FIFO Read Register 1 definitions */ +#define XILINX_PCIE_RPIFR1_INTR_VALID BIT(31) +#define XILINX_PCIE_RPIFR1_MSI_INTR BIT(30) +#define XILINX_PCIE_RPIFR1_INTR_MASK GENMASK(28, 27) +#define XILINX_PCIE_RPIFR1_ALL_MASK 0xFFFFFFFF +#define XILINX_PCIE_RPIFR1_INTR_SHIFT 27 + +/* Bridge Info Register definitions */ +#define XILINX_PCIE_BIR_ECAM_SZ_MASK GENMASK(18, 16) +#define XILINX_PCIE_BIR_ECAM_SZ_SHIFT 16 + +/* Root Port Interrupt FIFO Read Register 2 definitions */ +#define XILINX_PCIE_RPIFR2_MSG_DATA GENMASK(15, 0) + +/* Root Port Status/control Register definitions */ +#define XILINX_PCIE_REG_RPSC_BEN BIT(0) + +/* Phy Status/Control Register definitions */ +#define XILINX_PCIE_REG_PSCR_LNKUP BIT(11) + +/* ECAM definitions */ +#define ECAM_BUS_NUM_SHIFT 20 +#define ECAM_DEV_NUM_SHIFT 12 + +/* Number of MSI IRQs */ +#define XILINX_NUM_MSI_IRQS 128 + +/* Number of Memory Resources */ +#define XILINX_MAX_NUM_RESOURCES 3 + +/** + * struct xilinx_pcie_port - PCIe port information + * @reg_base: IO Mapped Register Base + * @irq: Interrupt number + * @msi_pages: MSI pages + * @root_busno: Root Bus number + * @dev: Device pointer + * @irq_domain: IRQ domain pointer + * @bus_range: Bus range + * @resources: Bus Resources + */ +struct xilinx_pcie_port { + void __iomem *reg_base; + u32 irq; + unsigned long msi_pages; + u8 root_busno; + struct device *dev; + struct irq_domain *irq_domain; + struct resource bus_range; + struct list_head resources; +}; + +static DECLARE_BITMAP(msi_irq_in_use, XILINX_NUM_MSI_IRQS); + +static inline struct xilinx_pcie_port *sys_to_pcie(struct pci_sys_data *sys) +{ + return sys->private_data; +} + +static inline u32 pcie_read(struct xilinx_pcie_port *port, u32 reg) +{ + return readl(port->reg_base + reg); +} + +static inline void pcie_write(struct xilinx_pcie_port *port, u32 val, u32 reg) +{ + writel(val, port->reg_base + reg); +} + +static inline bool xilinx_pcie_link_is_up(struct xilinx_pcie_port *port) +{ + return (pcie_read(port, XILINX_PCIE_REG_PSCR) & + XILINX_PCIE_REG_PSCR_LNKUP) ? 1 : 0; +} + +/** + * xilinx_pcie_clear_err_interrupts - Clear Error Interrupts + * @port: PCIe port information + */ +static void xilinx_pcie_clear_err_interrupts(struct xilinx_pcie_port *port) +{ + u32 val = pcie_read(port, XILINX_PCIE_REG_RPEFR); + + if (val & XILINX_PCIE_RPEFR_ERR_VALID) { + dev_dbg(port->dev, "Requester ID %d\n", + val & XILINX_PCIE_RPEFR_REQ_ID); + pcie_write(port, XILINX_PCIE_RPEFR_ALL_MASK, + XILINX_PCIE_REG_RPEFR); + } +} + +/** + * xilinx_pcie_valid_device - Check if a valid device is present on bus + * @bus: PCI Bus structure + * @devfn: device/function + * + * Return: 'true' on success and 'false' if invalid device is found + */ +static bool xilinx_pcie_valid_device(struct pci_bus *bus, unsigned int devfn) +{ + struct xilinx_pcie_port *port = sys_to_pcie(bus->sysdata); + + /* Check if link is up when trying to access downstream ports */ + if (bus->number != port->root_busno) + if (!xilinx_pcie_link_is_up(port)) + return false; + + /* Only one device down on each root port */ + if (bus->number == port->root_busno && devfn > 0) + return false; + + /* + * Do not read more than one device on the bus directly attached + * to RC. + */ + if (bus->primary == port->root_busno && devfn > 0) + return false; + + return true; +} + +/** + * xilinx_pcie_config_base - Get configuration base + * @bus: PCI Bus structure + * @devfn: Device/function + * @where: Offset from base + * + * Return: Base address of the configuration space needed to be + * accessed. + */ +static void __iomem *xilinx_pcie_config_base(struct pci_bus *bus, + unsigned int devfn, int where) +{ + struct xilinx_pcie_port *port = sys_to_pcie(bus->sysdata); + int relbus; + + relbus = (bus->number << ECAM_BUS_NUM_SHIFT) | + (devfn << ECAM_DEV_NUM_SHIFT); + + return port->reg_base + relbus + where; +} + +/** + * xilinx_pcie_read_config - Read configuration space + * @bus: PCI Bus structure + * @devfn: Device/function + * @where: Offset from base + * @size: Byte/word/dword + * @val: Value to be read + * + * Return: PCIBIOS_SUCCESSFUL on success + * PCIBIOS_DEVICE_NOT_FOUND on failure + */ +static int xilinx_pcie_read_config(struct pci_bus *bus, unsigned int devfn, + int where, int size, u32 *val) +{ + void __iomem *addr; + + if (!xilinx_pcie_valid_device(bus, devfn)) { + *val = 0xFFFFFFFF; + return PCIBIOS_DEVICE_NOT_FOUND; + } + + addr = xilinx_pcie_config_base(bus, devfn, where); + + switch (size) { + case 1: + *val = readb(addr); + break; + case 2: + *val = readw(addr); + break; + default: + *val = readl(addr); + break; + } + + return PCIBIOS_SUCCESSFUL; +} + +/** + * xilinx_pcie_write_config - Write configuration space + * @bus: PCI Bus structure + * @devfn: Device/function + * @where: Offset from base + * @size: Byte/word/dword + * @val: Value to be written to device + * + * Return: PCIBIOS_SUCCESSFUL on success + * PCIBIOS_DEVICE_NOT_FOUND on failure + */ +static int xilinx_pcie_write_config(struct pci_bus *bus, unsigned int devfn, + int where, int size, u32 val) +{ + void __iomem *addr; + + if (!xilinx_pcie_valid_device(bus, devfn)) + return PCIBIOS_DEVICE_NOT_FOUND; + + addr = xilinx_pcie_config_base(bus, devfn, where); + + switch (size) { + case 1: + writeb(val, addr); + break; + case 2: + writew(val, addr); + break; + default: + writel(val, addr); + break; + } + + return PCIBIOS_SUCCESSFUL; +} + +/* PCIe operations */ +static struct pci_ops xilinx_pcie_ops = { + .read = xilinx_pcie_read_config, + .write = xilinx_pcie_write_config, +}; + +/* MSI functions */ + +/** + * xilinx_pcie_destroy_msi - Free MSI number + * @irq: IRQ to be freed + */ +static void xilinx_pcie_destroy_msi(unsigned int irq) +{ + struct irq_desc *desc; + struct msi_desc *msi; + struct xilinx_pcie_port *port; + + desc = irq_to_desc(irq); + msi = irq_desc_get_msi_desc(desc); + port = sys_to_pcie(msi->dev->bus->sysdata); + + if (!test_bit(irq, msi_irq_in_use)) + dev_err(port->dev, "Trying to free unused MSI#%d\n", irq); + else + clear_bit(irq, msi_irq_in_use); +} + +/** + * xilinx_pcie_assign_msi - Allocate MSI number + * @port: PCIe port structure + * + * Return: A valid IRQ on success and error value on failure. + */ +static int xilinx_pcie_assign_msi(struct xilinx_pcie_port *port) +{ + int pos; + + pos = find_first_zero_bit(msi_irq_in_use, XILINX_NUM_MSI_IRQS); + if (pos < XILINX_NUM_MSI_IRQS) + set_bit(pos, msi_irq_in_use); + else + return -ENOSPC; + + return pos; +} + +/** + * xilinx_msi_teardown_irq - Destroy the MSI + * @chip: MSI Chip descriptor + * @irq: MSI IRQ to destroy + */ +static void xilinx_msi_teardown_irq(struct msi_chip *chip, unsigned int irq) +{ + xilinx_pcie_destroy_msi(irq); +} + +/** + * xilinx_pcie_msi_setup_irq - Setup MSI request + * @chip: MSI chip pointer + * @pdev: PCIe device pointer + * @desc: MSI descriptor pointer + * + * Return: '0' on success and error value on failure + */ +static int xilinx_pcie_msi_setup_irq(struct msi_chip *chip, + struct pci_dev *pdev, + struct msi_desc *desc) +{ + struct xilinx_pcie_port *port = sys_to_pcie(pdev->bus->sysdata); + unsigned int irq; + int hwirq; + struct msi_msg msg; + phys_addr_t msg_addr; + + hwirq = xilinx_pcie_assign_msi(port); + if (irq < 0) + return irq; + + irq = irq_create_mapping(port->irq_domain, hwirq); + if (!irq) + return -EINVAL; + + irq_set_msi_desc(irq, desc); + + msg_addr = virt_to_phys((void *)port->msi_pages); + + msg.address_hi = 0; + msg.address_lo = msg_addr; + msg.data = irq; + + write_msi_msg(irq, &msg); + + return 0; +} + +/* MSI Chip Descriptor */ +static struct msi_chip xilinx_pcie_msi_chip = { + .setup_irq = xilinx_pcie_msi_setup_irq, + .teardown_irq = xilinx_msi_teardown_irq, +}; + +/* HW Interrupt Chip Descriptor */ +static struct irq_chip xilinx_msi_irq_chip = { + .name = "Xilinx PCIe MSI", + .irq_enable = unmask_msi_irq, + .irq_disable = mask_msi_irq, + .irq_mask = mask_msi_irq, + .irq_unmask = unmask_msi_irq, +}; + +/** + * xilinx_pcie_msi_map - Set the handler for the MSI and mark IRQ as valid + * @domain: IRQ domain + * @irq: Virtual IRQ number + * @hwirq: HW interrupt number + * + * Return: Always returns 0. + */ +static int xilinx_pcie_msi_map(struct irq_domain *domain, unsigned int irq, + irq_hw_number_t hwirq) +{ + irq_set_chip_and_handler(irq, &xilinx_msi_irq_chip, handle_simple_irq); + irq_set_chip_data(irq, domain->host_data); + set_irq_flags(irq, IRQF_VALID); + + return 0; +} + +/* IRQ Domain operations */ +static const struct irq_domain_ops msi_domain_ops = { + .map = xilinx_pcie_msi_map, +}; + +/** + * xilinx_pcie_enable_msi - Enable MSI support + * @port: PCIe port information + */ +static void xilinx_pcie_enable_msi(struct xilinx_pcie_port *port) +{ + phys_addr_t msg_addr; + + port->msi_pages = __get_free_pages(GFP_KERNEL, 0); + msg_addr = virt_to_phys((void *)port->msi_pages); + pcie_write(port, 0x0, XILINX_PCIE_REG_MSIBASE1); + pcie_write(port, msg_addr, XILINX_PCIE_REG_MSIBASE2); +} + +/** + * xilinx_pcie_add_bus - Add MSI chip info to PCIe bus + * @bus: PCIe bus + */ +static void xilinx_pcie_add_bus(struct pci_bus *bus) +{ + if (IS_ENABLED(CONFIG_PCI_MSI)) { + struct xilinx_pcie_port *port = sys_to_pcie(bus->sysdata); + + xilinx_pcie_msi_chip.dev = port->dev; + bus->msi = &xilinx_pcie_msi_chip; + } +} + +/* INTx Functions */ + +/** + * xilinx_pcie_intx_map - Set the handler for the INTx and mark IRQ as valid + * @domain: IRQ domain + * @irq: Virtual IRQ number + * @hwirq: HW interrupt number + * + * Return: Always returns 0. + */ +static int xilinx_pcie_intx_map(struct irq_domain *domain, unsigned int irq, + irq_hw_number_t hwirq) +{ + irq_set_chip_and_handler(irq, &dummy_irq_chip, handle_simple_irq); + irq_set_chip_data(irq, domain->host_data); + set_irq_flags(irq, IRQF_VALID); + + return 0; +} + +/* INTx IRQ Domain operations */ +static const struct irq_domain_ops intx_domain_ops = { + .map = xilinx_pcie_intx_map, +}; + +/* PCIe HW Functions */ + +/** + * xilinx_pcie_intr_handler - Interrupt Service Handler + * @irq: IRQ number + * @data: PCIe port information + * + * Return: IRQ_HANDLED on success and IRQ_NONE on failure + */ +static irqreturn_t xilinx_pcie_intr_handler(int irq, void *data) +{ + struct xilinx_pcie_port *port = (struct xilinx_pcie_port *)data; + u32 val, mask, status, msi_data; + + /* Read interrupt decode and mask registers */ + val = pcie_read(port, XILINX_PCIE_REG_IDR); + mask = pcie_read(port, XILINX_PCIE_REG_IMR); + + status = val & mask; + if (!status) + return IRQ_NONE; + + if (status & XILINX_PCIE_INTR_LINK_DOWN) + dev_warn(port->dev, "Link Down\n"); + + if (status & XILINX_PCIE_INTR_ECRC_ERR) + dev_warn(port->dev, "ECRC failed\n"); + + if (status & XILINX_PCIE_INTR_STR_ERR) + dev_warn(port->dev, "Streaming error\n"); + + if (status & XILINX_PCIE_INTR_HOT_RESET) + dev_info(port->dev, "Hot reset\n"); + + if (status & XILINX_PCIE_INTR_CFG_TIMEOUT) + dev_warn(port->dev, "ECAM access timeout\n"); + + if (status & XILINX_PCIE_INTR_CORRECTABLE) { + dev_warn(port->dev, "Correctable error message\n"); + xilinx_pcie_clear_err_interrupts(port); + } + + if (status & XILINX_PCIE_INTR_NONFATAL) { + dev_warn(port->dev, "Non fatal error message\n"); + xilinx_pcie_clear_err_interrupts(port); + } + + if (status & XILINX_PCIE_INTR_FATAL) { + dev_warn(port->dev, "Fatal error message\n"); + xilinx_pcie_clear_err_interrupts(port); + } + + if (status & XILINX_PCIE_INTR_INTX) { + /* INTx interrupt received */ + val = pcie_read(port, XILINX_PCIE_REG_RPIFR1); + + /* Check whether interrupt valid */ + if (!(val & XILINX_PCIE_RPIFR1_INTR_VALID)) { + dev_warn(port->dev, "RP Intr FIFO1 read error\n"); + return IRQ_HANDLED; + } + + /* Clear interrupt FIFO register 1 */ + pcie_write(port, XILINX_PCIE_RPIFR1_ALL_MASK, + XILINX_PCIE_REG_RPIFR1); + + /* Handle INTx Interrupt */ + val = ((val & XILINX_PCIE_RPIFR1_INTR_MASK) >> + XILINX_PCIE_RPIFR1_INTR_SHIFT) + 1; + generic_handle_irq(irq_find_mapping(port->irq_domain, val)); + } + + if (status & XILINX_PCIE_INTR_MSI) { + /* MSI Interrupt */ + val = pcie_read(port, XILINX_PCIE_REG_RPIFR1); + + if (!(val & XILINX_PCIE_RPIFR1_INTR_VALID)) { + dev_warn(port->dev, "RP Intr FIFO1 read error\n"); + return IRQ_HANDLED; + } + + if (val & XILINX_PCIE_RPIFR1_MSI_INTR) { + msi_data = pcie_read(port, XILINX_PCIE_REG_RPIFR2) & + XILINX_PCIE_RPIFR2_MSG_DATA; + + /* Clear interrupt FIFO register 1 */ + pcie_write(port, XILINX_PCIE_RPIFR1_ALL_MASK, + XILINX_PCIE_REG_RPIFR1); + + if (IS_ENABLED(CONFIG_PCI_MSI)) { + /* Handle MSI Interrupt */ + generic_handle_irq(msi_data); + } + } + } + + if (status & XILINX_PCIE_INTR_SLV_UNSUPP) + dev_warn(port->dev, "Slave unsupported request\n"); + + if (status & XILINX_PCIE_INTR_SLV_UNEXP) + dev_warn(port->dev, "Slave unexpected completion\n"); + + if (status & XILINX_PCIE_INTR_SLV_COMPL) + dev_warn(port->dev, "Slave completion timeout\n"); + + if (status & XILINX_PCIE_INTR_SLV_ERRP) + dev_warn(port->dev, "Slave Error Poison\n"); + + if (status & XILINX_PCIE_INTR_SLV_CMPABT) + dev_warn(port->dev, "Slave Completer Abort\n"); + + if (status & XILINX_PCIE_INTR_SLV_ILLBUR) + dev_warn(port->dev, "Slave Illegal Burst\n"); + + if (status & XILINX_PCIE_INTR_MST_DECERR) + dev_warn(port->dev, "Master decode error\n"); + + if (status & XILINX_PCIE_INTR_MST_SLVERR) + dev_warn(port->dev, "Master slave error\n"); + + if (status & XILINX_PCIE_INTR_MST_ERRP) + dev_warn(port->dev, "Master error poison\n"); + + /* Clear the Interrupt Decode register */ + pcie_write(port, status, XILINX_PCIE_REG_IDR); + + return IRQ_HANDLED; +} + +/** + * xilinx_pcie_free_irq_domain - Free IRQ domain + * @port: PCIe port information + */ +static void xilinx_pcie_free_irq_domain(struct xilinx_pcie_port *port) +{ + int i; + u32 irq, num_irqs; + + /* Free IRQ Domain */ + if (IS_ENABLED(CONFIG_PCI_MSI)) { + + free_pages(port->msi_pages, 0); + + num_irqs = XILINX_NUM_MSI_IRQS; + } else { + /* INTx */ + num_irqs = 4; + } + + for (i = 0; i < num_irqs; i++) { + irq = irq_find_mapping(port->irq_domain, i); + if (irq > 0) + irq_dispose_mapping(irq); + } + + irq_domain_remove(port->irq_domain); +} + +/** + * xilinx_pcie_init_irq_domain - Initialize IRQ domain + * @port: PCIe port information + * + * Return: '0' on success and error value on failure + */ +static int xilinx_pcie_init_irq_domain(struct xilinx_pcie_port *port) +{ + struct device *dev = port->dev; + struct device_node *node = dev->of_node; + struct device_node *pcie_intc_node; + + /* Setup INTx */ + pcie_intc_node = of_get_next_child(node, NULL); + if (!pcie_intc_node) { + dev_err(dev, "No PCIe Intc node found\n"); + return PTR_ERR(pcie_intc_node); + } + + port->irq_domain = irq_domain_add_linear(pcie_intc_node, 4, + &intx_domain_ops, + port); + if (!port->irq_domain) { + dev_err(dev, "Failed to get a INTx IRQ domain\n"); + return PTR_ERR(port->irq_domain); + } + + /* Setup MSI */ + if (IS_ENABLED(CONFIG_PCI_MSI)) { + port->irq_domain = irq_domain_add_linear(node, + XILINX_NUM_MSI_IRQS, + &msi_domain_ops, + &xilinx_pcie_msi_chip); + if (!port->irq_domain) { + dev_err(dev, "Failed to get a MSI IRQ domain\n"); + return PTR_ERR(port->irq_domain); + } + + xilinx_pcie_enable_msi(port); + } + + return 0; +} + +/** + * xilinx_pcie_init_port - Initialize hardware + * @port: PCIe port information + */ +static void xilinx_pcie_init_port(struct xilinx_pcie_port *port) +{ + if (xilinx_pcie_link_is_up(port)) + dev_info(port->dev, "PCIe Link is UP\n"); + else + dev_info(port->dev, "PCIe Link is DOWN\n"); + + /* Disable all interrupts */ + pcie_write(port, ~XILINX_PCIE_IDR_ALL_MASK, + XILINX_PCIE_REG_IMR); + + /* Clear pending interrupts */ + pcie_write(port, pcie_read(port, XILINX_PCIE_REG_IDR) & + XILINX_PCIE_IMR_ALL_MASK, + XILINX_PCIE_REG_IDR); + + /* Enable all interrupts */ + pcie_write(port, XILINX_PCIE_IMR_ALL_MASK, XILINX_PCIE_REG_IMR); + + /* Enable the Bridge enable bit */ + pcie_write(port, pcie_read(port, XILINX_PCIE_REG_RPSC) | + XILINX_PCIE_REG_RPSC_BEN, + XILINX_PCIE_REG_RPSC); +} + +/** + * xilinx_pcie_setup - Setup memory resources + * @nr: Bus number + * @sys: Per controller structure + * + * Return: '1' on success and error value on failure + */ +static int xilinx_pcie_setup(int nr, struct pci_sys_data *sys) +{ + struct xilinx_pcie_port *port = sys_to_pcie(sys); + + list_splice_init(&port->resources, &sys->resources); + + return 1; +} + +/** + * xilinx_pcie_scan_bus - Scan PCIe bus for devices + * @nr: Bus number + * @sys: Per controller structure + * + * Return: Valid Bus pointer on success and NULL on failure + */ +static struct pci_bus *xilinx_pcie_scan_bus(int nr, struct pci_sys_data *sys) +{ + struct xilinx_pcie_port *port = sys_to_pcie(sys); + struct pci_bus *bus; + + port->root_busno = sys->busnr; + bus = pci_scan_root_bus(port->dev, sys->busnr, &xilinx_pcie_ops, + sys, &sys->resources); + + return bus; +} + +/** + * xilinx_pcie_parse_and_add_res - Add resources by parsing ranges + * @port: PCIe port information + * + * Return: '0' on success and error value on failure + */ +static int xilinx_pcie_parse_and_add_res(struct xilinx_pcie_port *port) +{ + struct device *dev = port->dev; + struct device_node *node = dev->of_node; + struct resource *mem; + resource_size_t offset; + struct of_pci_range_parser parser; + struct of_pci_range range; + struct pci_host_bridge_window *win; + int err = 0, mem_resno = 0; + + /* Get the ranges */ + if (of_pci_range_parser_init(&parser, node)) { + dev_err(dev, "missing \"ranges\" property\n"); + return -EINVAL; + } + + /* Parse the ranges and add the resources found to the list */ + for_each_of_pci_range(&parser, &range) { + + if (mem_resno >= XILINX_MAX_NUM_RESOURCES) { + dev_err(dev, "Maximum memory resources exceeded\n"); + return -EINVAL; + } + + mem = devm_kmalloc(dev, sizeof(*mem), GFP_KERNEL); + if (!mem) { + err = -ENOMEM; + goto free_resources; + } + + of_pci_range_to_resource(&range, node, mem); + + switch (mem->flags & IORESOURCE_TYPE_BITS) { + case IORESOURCE_MEM: + offset = range.cpu_addr - range.pci_addr; + mem_resno++; + break; + default: + err = -EINVAL; + break; + } + + if (err < 0) { + dev_warn(dev, "Invalid resource found %pR\n", mem); + continue; + } + + err = request_resource(&iomem_resource, mem); + if (err) + goto free_resources; + + pci_add_resource_offset(&port->resources, mem, offset); + } + + /* Get the bus range */ + if (of_pci_parse_bus_range(node, &port->bus_range)) { + u32 val = pcie_read(port, XILINX_PCIE_REG_BIR); + u8 last; + + last = (val & XILINX_PCIE_BIR_ECAM_SZ_MASK) >> + XILINX_PCIE_BIR_ECAM_SZ_SHIFT; + + port->bus_range = (struct resource) { + .name = node->name, + .start = 0, + .end = last, + .flags = IORESOURCE_BUS, + }; + } + + /* Register bus resource */ + pci_add_resource(&port->resources, &port->bus_range); + + return 0; + +free_resources: + release_child_resources(&iomem_resource); + list_for_each_entry(win, &port->resources, list) + devm_kfree(dev, win->res); + pci_free_resource_list(&port->resources); + + return err; +} + +/** + * xilinx_pcie_parse_dt - Parse Device tree + * @port: PCIe port information + * + * Return: '0' on success and error value on failure + */ +static int xilinx_pcie_parse_dt(struct xilinx_pcie_port *port) +{ + struct device *dev = port->dev; + struct device_node *node = dev->of_node; + struct resource regs; + const char *type; + int err; + + type = of_get_property(node, "device_type", NULL); + if (!type || strcmp(type, "pci")) { + dev_err(dev, "invalid \"device_type\" %s\n", type); + return -EINVAL; + } + + err = of_address_to_resource(node, 0, ®s); + if (err) { + dev_err(dev, "missing \"reg\" property\n"); + return err; + } + + port->reg_base = devm_ioremap_resource(dev, ®s); + if (IS_ERR(port->reg_base)) + return PTR_ERR(port->reg_base); + + port->irq = irq_of_parse_and_map(node, 0); + err = devm_request_irq(dev, port->irq, xilinx_pcie_intr_handler, + IRQF_SHARED, "xilinx-pcie", port); + if (err) { + dev_err(dev, "unable to request irq %d\n", port->irq); + return err; + } + + return 0; +} + +/** + * xilinx_pcie_probe - Probe function + * @pdev: Platform device pointer + * + * Return: '0' on success and error value on failure + */ +static int xilinx_pcie_probe(struct platform_device *pdev) +{ + struct xilinx_pcie_port *port; + struct hw_pci hw; + struct device *dev = &pdev->dev; + int err; + + if (!dev->of_node) + return -ENODEV; + + port = devm_kzalloc(dev, sizeof(*port), GFP_KERNEL); + if (!port) + return -ENOMEM; + + port->dev = dev; + + err = xilinx_pcie_parse_dt(port); + if (err) { + dev_err(dev, "Parsing DT failed\n"); + return err; + } + + xilinx_pcie_init_port(port); + + err = xilinx_pcie_init_irq_domain(port); + if (err) { + dev_err(dev, "Failed creating IRQ Domain\n"); + return err; + } + + /* + * Parse PCI ranges, configuration bus range and + * request their resources + */ + INIT_LIST_HEAD(&port->resources); + err = xilinx_pcie_parse_and_add_res(port); + if (err) { + dev_err(dev, "Failed adding resources\n"); + return err; + } + + platform_set_drvdata(pdev, port); + + /* Register the device */ + memset(&hw, 0, sizeof(hw)); + hw = (struct hw_pci) { + .nr_controllers = 1, + .private_data = (void **)&port, + .setup = xilinx_pcie_setup, + .map_irq = of_irq_parse_and_map_pci, + .add_bus = xilinx_pcie_add_bus, + .scan = xilinx_pcie_scan_bus, + .ops = &xilinx_pcie_ops, + }; + pci_common_init_dev(dev, &hw); + + return 0; +} + +/** + * xilinx_pcie_remove - Remove function + * @pdev: Platform device pointer + * + * Return: '0' always + */ +static int xilinx_pcie_remove(struct platform_device *pdev) +{ + struct xilinx_pcie_port *port = platform_get_drvdata(pdev); + + xilinx_pcie_free_irq_domain(port); + + return 0; +} + +static struct of_device_id xilinx_pcie_of_match[] = { + { .compatible = "xlnx,axi-pcie-host-1.00.a", }, + {} +}; + +static struct platform_driver xilinx_pcie_driver = { + .driver = { + .name = "xilinx-pcie", + .owner = THIS_MODULE, + .of_match_table = xilinx_pcie_of_match, + .suppress_bind_attrs = true, + }, + .probe = xilinx_pcie_probe, + .remove = xilinx_pcie_remove, +}; +module_platform_driver(xilinx_pcie_driver); + +MODULE_AUTHOR("Xilinx Inc"); +MODULE_DESCRIPTION("Xilinx AXI PCIe driver"); +MODULE_LICENSE("GPL v2"); -- 2.34.1