From 89da4293a7bb29ac42b7dd2c2573c8a5ebb0b6c7 Mon Sep 17 00:00:00 2001 From: Trent Piepho Date: Fri, 27 Sep 2013 05:37:25 -0700 Subject: [PATCH] spi: Use of_property_read_u32 Instead of getting the raw property, checking the length, and doing endian conversion each time, use the OF function of_property_read_u32() that does all that. Error messages are slightly improved with error codes from of_property_read_u32() for different ways the property may be invalid (missing, too short, etc.) Signed-off-by: Trent Piepho Signed-off-by: Mark Brown --- drivers/spi/spi.c | 49 ++++++++++++++++++++++------------------------- 1 file changed, 23 insertions(+), 26 deletions(-) diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index 74a526ce8c04..1cd491f79422 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -838,9 +838,8 @@ static void of_register_spi_devices(struct spi_master *master) { struct spi_device *spi; struct device_node *nc; - const __be32 *prop; int rc; - int len; + u32 value; if (!master->dev.of_node) return; @@ -865,14 +864,14 @@ static void of_register_spi_devices(struct spi_master *master) } /* Device address */ - prop = of_get_property(nc, "reg", &len); - if (!prop || len < sizeof(*prop)) { - dev_err(&master->dev, "%s has no 'reg' property\n", - nc->full_name); + rc = of_property_read_u32(nc, "reg", &value); + if (rc) { + dev_err(&master->dev, "%s has no valid 'reg' property (%d)\n", + nc->full_name, rc); spi_dev_put(spi); continue; } - spi->chip_select = be32_to_cpup(prop); + spi->chip_select = value; /* Mode (clock phase/polarity/etc.) */ if (of_find_property(nc, "spi-cpha", NULL)) @@ -885,55 +884,53 @@ static void of_register_spi_devices(struct spi_master *master) spi->mode |= SPI_3WIRE; /* Device DUAL/QUAD mode */ - prop = of_get_property(nc, "spi-tx-bus-width", &len); - if (prop && len == sizeof(*prop)) { - switch (be32_to_cpup(prop)) { - case SPI_NBITS_SINGLE: + if (!of_property_read_u32(nc, "spi-tx-bus-width", &value)) { + switch (value) { + case 1: break; - case SPI_NBITS_DUAL: + case 2: spi->mode |= SPI_TX_DUAL; break; - case SPI_NBITS_QUAD: + case 4: spi->mode |= SPI_TX_QUAD; break; default: dev_err(&master->dev, "spi-tx-bus-width %d not supported\n", - be32_to_cpup(prop)); + value); spi_dev_put(spi); continue; } } - prop = of_get_property(nc, "spi-rx-bus-width", &len); - if (prop && len == sizeof(*prop)) { - switch (be32_to_cpup(prop)) { - case SPI_NBITS_SINGLE: + if (!of_property_read_u32(nc, "spi-rx-bus-width", &value)) { + switch (value) { + case 1: break; - case SPI_NBITS_DUAL: + case 2: spi->mode |= SPI_RX_DUAL; break; - case SPI_NBITS_QUAD: + case 4: spi->mode |= SPI_RX_QUAD; break; default: dev_err(&master->dev, "spi-rx-bus-width %d not supported\n", - be32_to_cpup(prop)); + value); spi_dev_put(spi); continue; } } /* Device speed */ - prop = of_get_property(nc, "spi-max-frequency", &len); - if (!prop || len < sizeof(*prop)) { - dev_err(&master->dev, "%s has no 'spi-max-frequency' property\n", - nc->full_name); + rc = of_property_read_u32(nc, "spi-max-frequency", &value); + if (rc) { + dev_err(&master->dev, "%s has no valid 'spi-max-frequency' property (%d)\n", + nc->full_name, rc); spi_dev_put(spi); continue; } - spi->max_speed_hz = be32_to_cpup(prop); + spi->max_speed_hz = value; /* IRQ */ spi->irq = irq_of_parse_and_map(nc, 0); -- 2.34.1