From 8b6e79328f5ec33bad37c035e3cd0390ff82d556 Mon Sep 17 00:00:00 2001 From: Andrew Cagney Date: Sun, 24 Feb 2002 03:35:39 +0000 Subject: [PATCH] * Makefile.in (linux-thread.o): Delete target. * linux-thread.c: Delete file. --- gdb/ChangeLog | 3 + gdb/Makefile.in | 3 - gdb/linux-thread.c | 1759 -------------------------------------------- 3 files changed, 3 insertions(+), 1762 deletions(-) delete mode 100644 gdb/linux-thread.c diff --git a/gdb/ChangeLog b/gdb/ChangeLog index 8073d5671c..4220695f73 100644 --- a/gdb/ChangeLog +++ b/gdb/ChangeLog @@ -1,5 +1,8 @@ 2002-02-23 Andrew Cagney + * Makefile.in (linux-thread.o): Delete target. + * linux-thread.c: Delete file. + * config/djgpp/fnchange.lst: Rename bfd/elf32-sh64.c. Tweak other renamed SH files to be consistent. diff --git a/gdb/Makefile.in b/gdb/Makefile.in index 2e3d6f3caf..cf8b872179 100644 --- a/gdb/Makefile.in +++ b/gdb/Makefile.in @@ -1852,9 +1852,6 @@ sol-thread.o: sol-thread.c $(defs_h) $(gdbthread_h) $(target_h) $(inferior_h) \ linux-proc.o: linux-proc.c $(defs_h) -linux-thread.o: linux-thread.c $(breakpoint_h) $(gdbcmd_h) gdb_wait.h \ - $(gdbthread_h) $(gdbcore_h) $(inferior_h) $(target_h) $(defs_h) - thread-db.o: thread-db.c $(defs_h) gdb_assert.h gdb_proc_service.h \ gdb_thread_db.h $(bfd_h) $(gdbthread_h) $(inferior_h) $(symfile_h) \ $(objfiles_h) $(target_h) $(regcache_h) diff --git a/gdb/linux-thread.c b/gdb/linux-thread.c deleted file mode 100644 index f93387bfc7..0000000000 --- a/gdb/linux-thread.c +++ /dev/null @@ -1,1759 +0,0 @@ -/* Low level interface for debugging GNU/Linux threads for GDB, - the GNU debugger. - Copyright 1998, 1999, 2000 Free Software Foundation, Inc. - -This file is part of GDB. - -This program is free software; you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation; either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program; if not, write to the Free Software -Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ - -/* This module implements the debugging interface of the linuxthreads package - of the glibc. This package implements a simple clone()-based implementation - of Posix threads for Linux. To use this module, be sure that you have at - least the version of the linuxthreads package that holds the support of - GDB (currently 0.8 included in the glibc-2.0.7). - - Right now, the linuxthreads package does not care of priority scheduling, - so, neither this module does; In particular, the threads are resumed - in any order, which could lead to different scheduling than the one - happening when GDB does not control the execution. - - The latest point is that ptrace(PT_ATTACH, ...) is intrusive in Linux: - When a process is attached, then the attaching process becomes the current - parent of the attached process, and the old parent has lost this child. - If the old parent does a wait[...](), then this child is no longer - considered by the kernel as a child of the old parent, thus leading to - results of the call different when the child is attached and when it's not. - - A fix has been submitted to the Linux community to solve this problem, - which consequences are not visible to the application itself, but on the - process which may wait() for the completion of the application (mostly, - it may consider that the application no longer exists (errno == ECHILD), - although it does, and thus being unable to get the exit status and resource - usage of the child. If by chance, it is able to wait() for the application - after it has died (by receiving first a SIGCHILD, and then doing a wait(), - then the exit status and resource usage may be wrong, because the - linuxthreads package heavily relies on wait() synchronization to keep - them correct. */ - -#include "defs.h" -#include /* for pid_t */ -#include /* for PT_* flags */ -#include "gdb_wait.h" /* for WUNTRACED and __WCLONE flags */ -#include /* for struct sigaction and NSIG */ -#include - -#include "target.h" -#include "inferior.h" -#include "gdbcore.h" -#include "gdbthread.h" -#include "gdbcmd.h" -#include "breakpoint.h" - -#ifndef PT_ATTACH -#define PT_ATTACH PTRACE_ATTACH -#endif -#ifndef PT_KILL -#define PT_KILL PTRACE_KILL -#endif -#ifndef PT_READ_U -#define PT_READ_U PTRACE_PEEKUSR -#endif - -#ifdef NSIG -#define LINUXTHREAD_NSIG NSIG -#else -#ifdef _NSIG -#define LINUXTHREAD_NSIG _NSIG -#endif -#endif - -extern int child_suppress_run; /* make inftarg.c non-runnable */ -struct target_ops linuxthreads_ops; /* Forward declaration */ -extern struct target_ops child_ops; /* target vector for inftarg.c */ - -static CORE_ADDR linuxthreads_handles; /* array of linuxthreads handles */ -static CORE_ADDR linuxthreads_manager; /* pid of linuxthreads manager thread */ -static CORE_ADDR linuxthreads_initial; /* pid of linuxthreads initial thread */ -static CORE_ADDR linuxthreads_debug; /* linuxthreads internal debug flag */ -static CORE_ADDR linuxthreads_num; /* number of valid handle entries */ - -static int linuxthreads_max; /* Maximum number of linuxthreads. - Zero if this executable doesn't use - threads, or wasn't linked with a - debugger-friendly version of the - linuxthreads library. */ - -static int linuxthreads_sizeof_handle; /* size of a linuxthreads handle */ -static int linuxthreads_offset_descr; /* h_descr offset of the linuxthreads - handle */ -static int linuxthreads_offset_pid; /* p_pid offset of the linuxthreads - descr */ - -static int linuxthreads_manager_pid; /* manager pid */ -static int linuxthreads_initial_pid; /* initial pid */ - -/* These variables form a bag of threads with interesting status. If - wait_thread (PID) finds that PID stopped for some interesting - reason (i.e. anything other than stopped with SIGSTOP), then it - records its status in this queue. linuxthreads_wait and - linuxthreads_find_trap extract processes from here. */ -static int *linuxthreads_wait_pid; /* wait array of pid */ -static int *linuxthreads_wait_status; /* wait array of status */ -static int linuxthreads_wait_last; /* index of last valid elt in - linuxthreads_wait_{pid,status} */ - -static sigset_t linuxthreads_block_mask; /* sigset without SIGCHLD */ - -static int linuxthreads_step_pid; /* current stepped pid */ -static int linuxthreads_step_signo; /* current stepped target signal */ -static int linuxthreads_exit_status; /* exit status of initial thread */ - -static int linuxthreads_inferior_pid; /* temporary internal inferior pid */ -static int linuxthreads_breakpoint_pid; /* last pid that hit a breakpoint */ -static int linuxthreads_attach_pending; /* attach command without wait */ - -static int linuxthreads_breakpoints_inserted; /* any breakpoints inserted */ - -/* LinuxThreads uses certain signals for communication between - processes; we need to tell GDB to pass them through silently to the - inferior. The LinuxThreads library has global variables we can - read containing the relevant signal numbers, but since the signal - numbers are chosen at run-time, those variables aren't initialized - until the shared library's constructors have had a chance to run. */ - -struct linuxthreads_signal { - - /* The name of the LinuxThreads library variable that contains - the signal number. */ - char *var; - - /* True if this variable must exist for us to debug properly. */ - int required; - - /* The variable's address in the inferior, or zero if the - LinuxThreads library hasn't been loaded into this inferior yet. */ - CORE_ADDR addr; - - /* The signal number, or zero if we don't know yet (either because - we haven't found the variable, or it hasn't been initialized). - This is an actual target signal number that you could pass to - `kill', not a GDB signal number. */ - int signal; - - /* GDB's original settings for `stop' and `print' for this signal. - We restore them when the user selects a different executable. - Invariant: if sig->signal != 0, then sig->{stop,print} contain - the original settings. */ - int stop, print; -}; - -struct linuxthreads_signal linuxthreads_sig_restart = { - "__pthread_sig_restart", 1, 0, 0, 0, 0 -}; -struct linuxthreads_signal linuxthreads_sig_cancel = { - "__pthread_sig_cancel", 1, 0, 0, 0, 0 -}; -struct linuxthreads_signal linuxthreads_sig_debug = { - "__pthread_sig_debug", 0, 0, 0, 0, 0 -}; - -/* Set by thread_db module when it takes over the thread_stratum. - In that case we must: - a) refrain from turning on the debug signal, and - b) refrain from calling add_thread. */ - -int using_thread_db = 0; - -/* A table of breakpoint locations, one per PID. */ -static struct linuxthreads_breakpoint { - CORE_ADDR pc; /* PC of breakpoint */ - int pid; /* pid of breakpoint */ - int step; /* whether the pc has been reached after sstep */ -} *linuxthreads_breakpoint_zombie; /* Zombie breakpoints array */ -static int linuxthreads_breakpoint_last; /* Last zombie breakpoint */ - -/* linuxthreads_{insert,remove}_breakpoint pass the breakpoint address - to {insert,remove}_breakpoint via this variable, since - iterate_active_threads doesn't provide any way to pass values - through to the worker function. */ -static CORE_ADDR linuxthreads_breakpoint_addr; - -#define REMOVE_BREAKPOINT_ZOMBIE(_i) \ -{ \ - if ((_i) < linuxthreads_breakpoint_last) \ - linuxthreads_breakpoint_zombie[(_i)] = \ - linuxthreads_breakpoint_zombie[linuxthreads_breakpoint_last]; \ - linuxthreads_breakpoint_last--; \ -} - - - -#ifndef PTRACE_XFER_TYPE -#define PTRACE_XFER_TYPE int -#endif -/* Check to see if the given thread is alive. */ -static int -linuxthreads_thread_alive (ptid_t ptid) -{ - errno = 0; - return ptrace (PT_READ_U, PIDGET (ptid), (PTRACE_ARG3_TYPE)0, 0) >= 0 - || errno == 0; -} - -/* On detach(), find a SIGTRAP status. If stop is non-zero, find a - SIGSTOP one, too. - - Make sure PID is ready to run, and free of interference from our - efforts to debug it (e.g., pending SIGSTOP or SIGTRAP signals). If - STOP is zero, just look for a SIGTRAP. If STOP is non-zero, look - for a SIGSTOP, too. Return non-zero if PID is alive and ready to - run; return zero if PID is dead. - - PID may or may not be stopped at the moment, and we may or may not - have waited for it already. We check the linuxthreads_wait bag in - case we've already got a status for it. We may possibly wait for - it ourselves. - - PID may have signals waiting to be delivered. If they're caused by - our efforts to debug it, accept them with wait, but don't pass them - through to PID. Do pass all other signals through. */ -static int -linuxthreads_find_trap (int pid, int stop) -{ - int i; - int rpid; - int status; - int found_stop = 0; - int found_trap = 0; - - /* PID may have any number of signals pending. The kernel will - report each of them to us via wait, and then it's up to us to - pass them along to the process via ptrace, if we so choose. - - We need to paw through the whole set until we've found a SIGTRAP - (or a SIGSTOP, if `stop' is set). We don't pass the SIGTRAP (or - SIGSTOP) through, but we do re-send all the others, so PID will - receive them when we resume it. */ - int *wstatus = alloca (LINUXTHREAD_NSIG * sizeof (int)); - int last = 0; - - /* Look at the pending status */ - for (i = linuxthreads_wait_last; i >= 0; i--) - if (linuxthreads_wait_pid[i] == pid) - { - status = linuxthreads_wait_status[i]; - - /* Delete the i'th member of the table. Since the table is - unordered, we can do this simply by copying the table's - last element to the i'th position, and shrinking the table - by one element. */ - if (i < linuxthreads_wait_last) - { - linuxthreads_wait_status[i] = - linuxthreads_wait_status[linuxthreads_wait_last]; - linuxthreads_wait_pid[i] = - linuxthreads_wait_pid[linuxthreads_wait_last]; - } - linuxthreads_wait_last--; - - if (!WIFSTOPPED(status)) /* Thread has died */ - return 0; - - if (WSTOPSIG(status) == SIGTRAP) - { - if (stop) - found_trap = 1; - else - return 1; - } - else if (WSTOPSIG(status) == SIGSTOP) - { - if (stop) - found_stop = 1; - } - else - { - wstatus[0] = status; - last = 1; - } - - break; - } - - if (stop) - { - /* Make sure that we'll find what we're looking for. */ - if (!found_trap) - { - kill (pid, SIGTRAP); - } - if (!found_stop) - { - kill (pid, SIGSTOP); - } - } - - /* Catch all status until SIGTRAP and optionally SIGSTOP show up. */ - for (;;) - { - /* resume the child every time... */ - child_resume (pid_to_ptid (pid), 1, TARGET_SIGNAL_0); - - /* loop as long as errno == EINTR: - waitpid syscall may be aborted due to GDB receiving a signal. - FIXME: EINTR handling should no longer be necessary here, since - we now block SIGCHLD except in an explicit sigsuspend call. */ - - for (;;) - { - rpid = waitpid (pid, &status, __WCLONE); - if (rpid > 0) - { - break; - } - if (errno == EINTR) - { - continue; - } - - /* There are a few reasons the wait call above may have - failed. If the thread manager dies, its children get - reparented, and this interferes with GDB waiting for - them, in some cases. Another possibility is that the - initial thread was not cloned, so calling wait with - __WCLONE won't find it. I think neither of these should - occur in modern Linux kernels --- they don't seem to in - 2.0.36. */ - rpid = waitpid (pid, &status, 0); - if (rpid > 0) - { - break; - } - if (errno != EINTR) - perror_with_name ("find_trap/waitpid"); - } - - if (!WIFSTOPPED(status)) /* Thread has died */ - return 0; - - if (WSTOPSIG(status) == SIGTRAP) - if (!stop || found_stop) - break; - else - found_trap = 1; - else if (WSTOPSIG(status) != SIGSTOP) - wstatus[last++] = status; - else if (stop) - { - if (found_trap) - break; - else - found_stop = 1; - } - } - - /* Resend any other signals we noticed to the thread, to be received - when we continue it. */ - while (--last >= 0) - { - kill (pid, WSTOPSIG(wstatus[last])); - } - - return 1; -} - -static void -sigchld_handler (int signo) -{ - /* This handler is used to get an EINTR while doing waitpid() - when an event is received */ -} - -/* Have we already collected a wait status for PID in the - linuxthreads_wait bag? */ -static int -linuxthreads_pending_status (int pid) -{ - int i; - for (i = linuxthreads_wait_last; i >= 0; i--) - if (linuxthreads_wait_pid[i] == pid) - return 1; - return 0; -} - - -/* Internal linuxthreads signal management */ - -/* Check in OBJFILE for the variable that holds the number for signal SIG. - We assume that we've already found other LinuxThreads-ish variables - in OBJFILE, so we complain if it's required, but not there. - Return true iff things are okay. */ -static int -find_signal_var (struct linuxthreads_signal *sig, struct objfile *objfile) -{ - struct minimal_symbol *ms = lookup_minimal_symbol (sig->var, NULL, objfile); - - if (! ms) - { - if (sig->required) - { - fprintf_unfiltered (gdb_stderr, - "Unable to find linuxthreads symbol \"%s\"\n", - sig->var); - return 0; - } - else - { - sig->addr = 0; - return 1; - } - } - - sig->addr = SYMBOL_VALUE_ADDRESS (ms); - - return 1; -} - -static int -find_all_signal_vars (struct objfile *objfile) -{ - return ( find_signal_var (&linuxthreads_sig_restart, objfile) - && find_signal_var (&linuxthreads_sig_cancel, objfile) - && find_signal_var (&linuxthreads_sig_debug, objfile)); -} - -/* A struct complaint isn't appropriate here. */ -static int complained_cannot_determine_thread_signal_number = 0; - -/* Check to see if the variable holding the signal number for SIG has - been initialized yet. If it has, tell GDB to pass that signal - through to the inferior silently. */ -static void -check_signal_number (struct linuxthreads_signal *sig) -{ - int num; - - if (sig->signal) - /* We already know this signal number. */ - return; - - if (! sig->addr) - /* We don't know the variable's address yet. */ - return; - - if (target_read_memory (sig->addr, (char *)&num, sizeof (num)) - != 0) - { - /* If this happens once, it'll probably happen for all the - signals, so only complain once. */ - if (! complained_cannot_determine_thread_signal_number) - warning ("Cannot determine thread signal number; " - "GDB may report spurious signals."); - complained_cannot_determine_thread_signal_number = 1; - return; - } - - if (num == 0) - /* It hasn't been initialized yet. */ - return; - - /* We know sig->signal was zero, and is becoming non-zero, so it's - okay to sample GDB's original settings. */ - sig->signal = num; - sig->stop = signal_stop_update (target_signal_from_host (num), 0); - sig->print = signal_print_update (target_signal_from_host (num), 0); -} - -void -check_all_signal_numbers (void) -{ - /* If this isn't a LinuxThreads program, quit early. */ - if (! linuxthreads_max) - return; - - check_signal_number (&linuxthreads_sig_restart); - check_signal_number (&linuxthreads_sig_cancel); - check_signal_number (&linuxthreads_sig_debug); - - /* handle linuxthread exit */ - if (linuxthreads_sig_debug.signal - || linuxthreads_sig_restart.signal) - { - struct sigaction sact; - - sact.sa_handler = sigchld_handler; - sigemptyset(&sact.sa_mask); - sact.sa_flags = 0; - - if (linuxthreads_sig_debug.signal > 0) - sigaction(linuxthreads_sig_cancel.signal, &sact, NULL); - else - sigaction(linuxthreads_sig_restart.signal, &sact, NULL); - } -} - - -/* Restore GDB's original settings for SIG. - This should only be called when we're no longer sure if we're - talking to an executable that uses LinuxThreads, so we clear the - signal number and variable address too. */ -static void -restore_signal (struct linuxthreads_signal *sig) -{ - if (! sig->signal) - return; - - /* We know sig->signal was non-zero, and is becoming zero, so it's - okay to restore GDB's original settings. */ - signal_stop_update (target_signal_from_host (sig->signal), sig->stop); - signal_print_update (target_signal_from_host (sig->signal), sig->print); - - sig->signal = 0; - sig->addr = 0; -} - - -/* Restore GDB's original settings for all LinuxThreads signals. - This should only be called when we're no longer sure if we're - talking to an executable that uses LinuxThreads, so we clear the - signal number and variable address too. */ -static void -restore_all_signals (void) -{ - restore_signal (&linuxthreads_sig_restart); - restore_signal (&linuxthreads_sig_cancel); - restore_signal (&linuxthreads_sig_debug); - - /* If it happens again, we should complain again. */ - complained_cannot_determine_thread_signal_number = 0; -} - - - - -/* Apply FUNC to the pid of each active thread. This consults the - inferior's handle table to find active threads. - - If ALL is non-zero, process all threads. - If ALL is zero, skip threads with pending status. */ -static void -iterate_active_threads (void (*func) (int), int all) -{ - CORE_ADDR descr; - int pid; - int i; - int num; - - read_memory (linuxthreads_num, (char *)&num, sizeof (int)); - - for (i = 0; i < linuxthreads_max && num > 0; i++) - { - read_memory (linuxthreads_handles + - linuxthreads_sizeof_handle * i + linuxthreads_offset_descr, - (char *)&descr, sizeof (void *)); - if (descr) - { - num--; - read_memory (descr + linuxthreads_offset_pid, - (char *)&pid, sizeof (pid_t)); - if (pid > 0 && pid != linuxthreads_manager_pid - && (all || (!linuxthreads_pending_status (pid)))) - (*func)(pid); - } - } -} - -/* Insert a thread breakpoint at linuxthreads_breakpoint_addr. - This is the worker function for linuxthreads_insert_breakpoint, - which passes it to iterate_active_threads. */ -static void -insert_breakpoint (int pid) -{ - int j; - - /* Remove (if any) the positive zombie breakpoint. */ - for (j = linuxthreads_breakpoint_last; j >= 0; j--) - if (linuxthreads_breakpoint_zombie[j].pid == pid) - { - if ((linuxthreads_breakpoint_zombie[j].pc - DECR_PC_AFTER_BREAK - == linuxthreads_breakpoint_addr) - && !linuxthreads_breakpoint_zombie[j].step) - REMOVE_BREAKPOINT_ZOMBIE(j); - break; - } -} - -/* Note that we're about to remove a thread breakpoint at - linuxthreads_breakpoint_addr. - - This is the worker function for linuxthreads_remove_breakpoint, - which passes it to iterate_active_threads. The actual work of - overwriting the breakpoint instruction is done by - child_ops.to_remove_breakpoint; here, we simply create a zombie - breakpoint if the thread's PC is pointing at the breakpoint being - removed. */ -static void -remove_breakpoint (int pid) -{ - int j; - - /* Insert a positive zombie breakpoint (if needed). */ - for (j = 0; j <= linuxthreads_breakpoint_last; j++) - if (linuxthreads_breakpoint_zombie[j].pid == pid) - break; - - if (in_thread_list (pid_to_ptid (pid)) - && linuxthreads_thread_alive (pid_to_ptid (pid))) - { - CORE_ADDR pc = read_pc_pid (pid_to_ptid (pid)); - if (linuxthreads_breakpoint_addr == pc - DECR_PC_AFTER_BREAK - && j > linuxthreads_breakpoint_last) - { - linuxthreads_breakpoint_zombie[j].pid = pid; - linuxthreads_breakpoint_zombie[j].pc = pc; - linuxthreads_breakpoint_zombie[j].step = 0; - linuxthreads_breakpoint_last++; - } - } -} - -/* Kill a thread */ -static void -kill_thread (int pid) -{ - if (in_thread_list (pid_to_ptid (pid))) - { - ptrace (PT_KILL, pid, (PTRACE_ARG3_TYPE) 0, 0); - } - else - { - kill (pid, SIGKILL); - } -} - -/* Resume a thread */ -static void -resume_thread (int pid) -{ - if (pid != PIDGET (inferior_ptid) - && in_thread_list (pid_to_ptid (pid)) - && linuxthreads_thread_alive (pid_to_ptid (pid))) - { - if (pid == linuxthreads_step_pid) - { - child_resume (pid_to_ptid (pid), 1, linuxthreads_step_signo); - } - else - { - child_resume (pid_to_ptid (pid), 0, TARGET_SIGNAL_0); - } - } -} - -/* Detach a thread */ -static void -detach_thread (int pid) -{ - ptid_t ptid = pid_to_ptid (pid); - - if (in_thread_list (ptid) && linuxthreads_thread_alive (ptid)) - { - /* Remove pending SIGTRAP and SIGSTOP */ - linuxthreads_find_trap (pid, 1); - - inferior_ptid = ptid; - detach (TARGET_SIGNAL_0); - inferior_ptid = pid_to_ptid (linuxthreads_manager_pid); - } -} - -/* Attach a thread */ -void -attach_thread (int pid) -{ - if (ptrace (PT_ATTACH, pid, (PTRACE_ARG3_TYPE) 0, 0) != 0) - perror_with_name ("attach_thread"); -} - -/* Stop a thread */ -static void -stop_thread (int pid) -{ - if (pid != PIDGET (inferior_ptid)) - { - if (in_thread_list (pid_to_ptid (pid))) - { - kill (pid, SIGSTOP); - } - else if (ptrace (PT_ATTACH, pid, (PTRACE_ARG3_TYPE) 0, 0) == 0) - { - if (!linuxthreads_attach_pending) - printf_filtered ("[New %s]\n", - target_pid_to_str (pid_to_ptid (pid))); - add_thread (pid_to_ptid (pid)); - if (linuxthreads_sig_debug.signal) - { - /* After a new thread in glibc 2.1 signals gdb its existence, - it suspends itself and wait for linuxthreads_sig_restart, - now we can wake it up. */ - kill (pid, linuxthreads_sig_restart.signal); - } - } - else - perror_with_name ("ptrace in stop_thread"); - } -} - -/* Wait for a thread */ -static void -wait_thread (int pid) -{ - int status; - int rpid; - - if (pid != PIDGET (inferior_ptid) && in_thread_list (pid_to_ptid (pid))) - { - /* loop as long as errno == EINTR: - waitpid syscall may be aborted if GDB receives a signal. - FIXME: EINTR handling should no longer be necessary here, since - we now block SIGCHLD except during an explicit sigsuspend call. */ - for (;;) - { - /* Get first pid status. */ - rpid = waitpid(pid, &status, __WCLONE); - if (rpid > 0) - { - break; - } - if (errno == EINTR) - { - continue; - } - - /* There are two reasons this might have failed: - - 1) PID is the initial thread, which wasn't cloned, so - passing the __WCLONE flag to waitpid prevented us from - finding it. - - 2) The manager thread is the parent of all but the - initial thread; if it dies, the children will all be - reparented to init, which will wait for them. This means - our call to waitpid won't find them. - - Actually, based on a casual look at the 2.0.36 kernel - code, I don't think either of these cases happen. But I - don't have things set up for remotely debugging the - kernel, so I'm not sure. And perhaps older kernels - didn't work. */ - rpid = waitpid(pid, &status, 0); - if (rpid > 0) - { - break; - } - if (errno != EINTR && linuxthreads_thread_alive (pid_to_ptid (pid))) - perror_with_name ("wait_thread/waitpid"); - - /* the thread is dead. */ - return; - } - if (!WIFSTOPPED(status) || WSTOPSIG(status) != SIGSTOP) - { - linuxthreads_wait_pid[++linuxthreads_wait_last] = pid; - linuxthreads_wait_status[linuxthreads_wait_last] = status; - } - } -} - -/* Walk through the linuxthreads handles in order to detect all - threads and stop them */ -static void -update_stop_threads (int test_pid) -{ - struct cleanup *old_chain = NULL; - - check_all_signal_numbers (); - - if (linuxthreads_manager_pid == 0) - { - if (linuxthreads_manager) - { - if (test_pid > 0 && test_pid != PIDGET (inferior_ptid)) - { - old_chain = save_inferior_ptid (); - inferior_ptid = pid_to_ptid (test_pid); - } - read_memory (linuxthreads_manager, - (char *)&linuxthreads_manager_pid, sizeof (pid_t)); - } - if (linuxthreads_initial) - { - if (test_pid > 0 && test_pid != PIDGET (inferior_ptid)) - { - old_chain = save_inferior_ptid (); - inferior_ptid = pid_to_ptid (test_pid); - } - read_memory(linuxthreads_initial, - (char *)&linuxthreads_initial_pid, sizeof (pid_t)); - } - } - - if (linuxthreads_manager_pid != 0) - { - if (old_chain == NULL && test_pid > 0 && - test_pid != PIDGET (inferior_ptid) - && linuxthreads_thread_alive (pid_to_ptid (test_pid))) - { - old_chain = save_inferior_ptid (); - inferior_ptid = pid_to_ptid (test_pid); - } - - if (linuxthreads_thread_alive (inferior_ptid)) - { - if (test_pid > 0) - { - if (test_pid != linuxthreads_manager_pid - && !linuxthreads_pending_status (linuxthreads_manager_pid)) - { - stop_thread (linuxthreads_manager_pid); - wait_thread (linuxthreads_manager_pid); - } - if (!in_thread_list (pid_to_ptid (test_pid))) - { - if (!linuxthreads_attach_pending) - printf_filtered ("[New %s]\n", - target_pid_to_str (pid_to_ptid (test_pid))); - add_thread (pid_to_ptid (test_pid)); - if (linuxthreads_sig_debug.signal - && PIDGET (inferior_ptid) == test_pid) - { - /* After a new thread in glibc 2.1 signals gdb its - existence, it suspends itself and wait for - linuxthreads_sig_restart, now we can wake it up. */ - kill (test_pid, linuxthreads_sig_restart.signal); - } - } - } - iterate_active_threads (stop_thread, 0); - iterate_active_threads (wait_thread, 0); - } - } - - if (old_chain != NULL) - do_cleanups (old_chain); -} - -/* This routine is called whenever a new symbol table is read in, or - when all symbol tables are removed. linux-thread event handling - can only be initialized when we find the right variables in - libpthread.so. Since it's a shared library, those variables don't - show up until the library gets mapped and the symbol table is read - in. */ - -/* This new_objfile event is now managed by a chained function pointer. - * It is the callee's responsability to call the next client on the chain. - */ - -/* Saved pointer to previous owner of the new_objfile event. */ -static void (*target_new_objfile_chain) (struct objfile *); - -void -linuxthreads_new_objfile (struct objfile *objfile) -{ - struct minimal_symbol *ms; - - /* Call predecessor on chain, if any. - Calling the new module first allows it to dominate, - if it finds its compatible libraries. */ - - if (target_new_objfile_chain) - target_new_objfile_chain (objfile); - - if (!objfile) - { - /* We're starting an entirely new executable, so we can no - longer be sure that it uses LinuxThreads. Restore the signal - flags to their original states. */ - restore_all_signals (); - - /* Indicate that we don't know anything's address any more. */ - linuxthreads_max = 0; - - goto quit; - } - - /* If we've already found our variables in another objfile, don't - bother looking for them again. */ - if (linuxthreads_max) - goto quit; - - if (! lookup_minimal_symbol ("__pthread_initial_thread", NULL, objfile)) - /* This object file isn't the pthreads library. */ - goto quit; - - if ((ms = lookup_minimal_symbol ("__pthread_threads_debug", - NULL, objfile)) == NULL) - { - /* The debugging-aware libpthreads is not present in this objfile */ - warning ("\ -This program seems to use POSIX threads, but the thread library used\n\ -does not support debugging. This may make using GDB difficult. Don't\n\ -set breakpoints or single-step through code that might be executed by\n\ -any thread other than the main thread."); - goto quit; - } - linuxthreads_debug = SYMBOL_VALUE_ADDRESS (ms); - - /* Read internal structures configuration */ - if ((ms = lookup_minimal_symbol ("__pthread_sizeof_handle", - NULL, objfile)) == NULL - || target_read_memory (SYMBOL_VALUE_ADDRESS (ms), - (char *)&linuxthreads_sizeof_handle, - sizeof (linuxthreads_sizeof_handle)) != 0) - { - fprintf_unfiltered (gdb_stderr, - "Unable to find linuxthreads symbol \"%s\"\n", - "__pthread_sizeof_handle"); - goto quit; - } - - if ((ms = lookup_minimal_symbol ("__pthread_offsetof_descr", - NULL, objfile)) == NULL - || target_read_memory (SYMBOL_VALUE_ADDRESS (ms), - (char *)&linuxthreads_offset_descr, - sizeof (linuxthreads_offset_descr)) != 0) - { - fprintf_unfiltered (gdb_stderr, - "Unable to find linuxthreads symbol \"%s\"\n", - "__pthread_offsetof_descr"); - goto quit; - } - - if ((ms = lookup_minimal_symbol ("__pthread_offsetof_pid", - NULL, objfile)) == NULL - || target_read_memory (SYMBOL_VALUE_ADDRESS (ms), - (char *)&linuxthreads_offset_pid, - sizeof (linuxthreads_offset_pid)) != 0) - { - fprintf_unfiltered (gdb_stderr, - "Unable to find linuxthreads symbol \"%s\"\n", - "__pthread_offsetof_pid"); - goto quit; - } - - if (! find_all_signal_vars (objfile)) - goto quit; - - /* Read adresses of internal structures to access */ - if ((ms = lookup_minimal_symbol ("__pthread_handles", - NULL, objfile)) == NULL) - { - fprintf_unfiltered (gdb_stderr, - "Unable to find linuxthreads symbol \"%s\"\n", - "__pthread_handles"); - goto quit; - } - linuxthreads_handles = SYMBOL_VALUE_ADDRESS (ms); - - if ((ms = lookup_minimal_symbol ("__pthread_handles_num", - NULL, objfile)) == NULL) - { - fprintf_unfiltered (gdb_stderr, - "Unable to find linuxthreads symbol \"%s\"\n", - "__pthread_handles_num"); - goto quit; - } - linuxthreads_num = SYMBOL_VALUE_ADDRESS (ms); - - if ((ms = lookup_minimal_symbol ("__pthread_manager_thread", - NULL, objfile)) == NULL) - { - fprintf_unfiltered (gdb_stderr, - "Unable to find linuxthreads symbol \"%s\"\n", - "__pthread_manager_thread"); - goto quit; - } - linuxthreads_manager = SYMBOL_VALUE_ADDRESS (ms) + linuxthreads_offset_pid; - - if ((ms = lookup_minimal_symbol ("__pthread_initial_thread", - NULL, objfile)) == NULL) - { - fprintf_unfiltered (gdb_stderr, - "Unable to find linuxthreads symbol \"%s\"\n", - "__pthread_initial_thread"); - goto quit; - } - linuxthreads_initial = SYMBOL_VALUE_ADDRESS (ms) + linuxthreads_offset_pid; - - /* Search for this last, so it won't be set to a non-zero value unless - we successfully found all the symbols above. */ - if ((ms = lookup_minimal_symbol ("__pthread_threads_max", - NULL, objfile)) == NULL - || target_read_memory (SYMBOL_VALUE_ADDRESS (ms), - (char *)&linuxthreads_max, - sizeof (linuxthreads_max)) != 0) - { - fprintf_unfiltered (gdb_stderr, - "Unable to find linuxthreads symbol \"%s\"\n", - "__pthread_threads_max"); - goto quit; - } - - /* Allocate gdb internal structures */ - linuxthreads_wait_pid = - (int *) xmalloc (sizeof (int) * (linuxthreads_max + 1)); - linuxthreads_wait_status = - (int *) xmalloc (sizeof (int) * (linuxthreads_max + 1)); - linuxthreads_breakpoint_zombie = (struct linuxthreads_breakpoint *) - xmalloc (sizeof (struct linuxthreads_breakpoint) * (linuxthreads_max + 1)); - - if (PIDGET (inferior_ptid) != 0 && - !linuxthreads_attach_pending && - !using_thread_db) /* suppressed by thread_db module */ - { - int on = 1; - - target_write_memory (linuxthreads_debug, (char *)&on, sizeof (on)); - linuxthreads_attach_pending = 1; - update_stop_threads (PIDGET (inferior_ptid)); - linuxthreads_attach_pending = 0; - } - - check_all_signal_numbers (); - -quit: -} - -/* If we have switched threads from a one that stopped at breakpoint, - return 1 otherwise 0. - - Note that this implementation is potentially redundant now that - default_prepare_to_proceed() has been added. - - FIXME This may not support switching threads after Ctrl-C - correctly. The default implementation does support this. */ - -int -linuxthreads_prepare_to_proceed (int step) -{ - if (!linuxthreads_max - || !linuxthreads_manager_pid - || !linuxthreads_breakpoint_pid - || !breakpoint_here_p ( - read_pc_pid (pid_to_ptid (linuxthreads_breakpoint_pid)))) - return 0; - - if (step) - { - /* Mark the current inferior as single stepping process. */ - linuxthreads_step_pid = PIDGET (inferior_ptid); - } - - linuxthreads_inferior_pid = linuxthreads_breakpoint_pid; - return linuxthreads_breakpoint_pid; -} - -/* Convert a pid to printable form. */ - -char * -linuxthreads_pid_to_str (ptid_t ptid) -{ - static char buf[100]; - int pid = PIDGET (ptid); - - sprintf (buf, "%s %d%s", linuxthreads_max ? "Thread" : "Pid", pid, - (pid == linuxthreads_manager_pid) ? " (manager thread)" - : (pid == linuxthreads_initial_pid) ? " (initial thread)" - : ""); - - return buf; -} - -/* Attach to process PID, then initialize for debugging it - and wait for the trace-trap that results from attaching. */ - -static void -linuxthreads_attach (char *args, int from_tty) -{ - if (!args) - error_no_arg ("process-id to attach"); - - push_target (&linuxthreads_ops); - linuxthreads_breakpoints_inserted = 1; - linuxthreads_breakpoint_last = -1; - linuxthreads_wait_last = -1; - WSETSTOP (linuxthreads_exit_status, 0); - - child_ops.to_attach (args, from_tty); - - if (linuxthreads_max) - linuxthreads_attach_pending = 1; -} - -/* Take a program previously attached to and detaches it. - The program resumes execution and will no longer stop - on signals, etc. We'd better not have left any breakpoints - in the program or it'll die when it hits one. For this - to work, it may be necessary for the process to have been - previously attached. It *might* work if the program was - started via the normal ptrace (PTRACE_TRACEME). */ - -static void -linuxthreads_detach (char *args, int from_tty) -{ - if (linuxthreads_max) - { - int i; - int pid; - int off = 0; - target_write_memory (linuxthreads_debug, (char *)&off, sizeof (off)); - - /* Walk through linuxthreads array in order to detach known threads. */ - if (linuxthreads_manager_pid != 0) - { - /* Get rid of all positive zombie breakpoints. */ - for (i = 0; i <= linuxthreads_breakpoint_last; i++) - { - if (linuxthreads_breakpoint_zombie[i].step) - continue; - - pid = linuxthreads_breakpoint_zombie[i].pid; - if (!linuxthreads_thread_alive (pid_to_ptid (pid))) - continue; - - if (linuxthreads_breakpoint_zombie[i].pc - != read_pc_pid (pid_to_ptid (pid))) - continue; - - /* Continue in STEP mode until the thread pc has moved or - until SIGTRAP is found on the same PC. */ - if (linuxthreads_find_trap (pid, 0) - && linuxthreads_breakpoint_zombie[i].pc - == read_pc_pid (pid_to_ptid (pid))) - write_pc_pid (linuxthreads_breakpoint_zombie[i].pc - - DECR_PC_AFTER_BREAK, pid_to_ptid (pid)); - } - - /* Detach thread after thread. */ - inferior_ptid = pid_to_ptid (linuxthreads_manager_pid); - iterate_active_threads (detach_thread, 1); - - /* Remove pending SIGTRAP and SIGSTOP */ - linuxthreads_find_trap (PIDGET (inferior_ptid), 1); - - linuxthreads_wait_last = -1; - WSETSTOP (linuxthreads_exit_status, 0); - } - - linuxthreads_inferior_pid = 0; - linuxthreads_breakpoint_pid = 0; - linuxthreads_step_pid = 0; - linuxthreads_step_signo = TARGET_SIGNAL_0; - linuxthreads_manager_pid = 0; - linuxthreads_initial_pid = 0; - linuxthreads_attach_pending = 0; - init_thread_list (); /* Destroy thread info */ - } - - child_ops.to_detach (args, from_tty); - - unpush_target (&linuxthreads_ops); -} - -/* Resume execution of process PID. If STEP is nozero, then - just single step it. If SIGNAL is nonzero, restart it with that - signal activated. */ - -static void -linuxthreads_resume (ptid_t ptid, int step, enum target_signal signo) -{ - if (!linuxthreads_max || stop_soon_quietly || linuxthreads_manager_pid == 0) - { - child_ops.to_resume (ptid, step, signo); - } - else - { - int rpid; - if (linuxthreads_inferior_pid) - { - /* Prepare resume of the last thread that hit a breakpoint */ - linuxthreads_breakpoints_inserted = 0; - rpid = linuxthreads_inferior_pid; - linuxthreads_step_signo = signo; - } - else - { - struct cleanup *old_chain = NULL; - int i; - - if (PIDGET (ptid) < 0) - { - linuxthreads_step_pid = step ? PIDGET (inferior_ptid) : 0; - linuxthreads_step_signo = signo; - rpid = PIDGET (inferior_ptid); - } - else - rpid = PIDGET (ptid); - - if (PIDGET (ptid) < 0 || !step) - { - linuxthreads_breakpoints_inserted = 1; - - /* Walk through linuxthreads array in order to resume threads */ - if (PIDGET (ptid) >= 0 && !ptid_equal (inferior_ptid, ptid)) - { - old_chain = save_inferior_ptid (); - inferior_ptid = ptid; - } - - iterate_active_threads (resume_thread, 0); - if (linuxthreads_manager_pid != PIDGET (inferior_ptid) - && !linuxthreads_pending_status (linuxthreads_manager_pid)) - resume_thread (linuxthreads_manager_pid); - } - else - linuxthreads_breakpoints_inserted = 0; - - /* Deal with zombie breakpoint */ - for (i = 0; i <= linuxthreads_breakpoint_last; i++) - if (linuxthreads_breakpoint_zombie[i].pid == rpid) - { - if (linuxthreads_breakpoint_zombie[i].pc - != read_pc_pid (pid_to_ptid (rpid))) - { - /* The current pc is out of zombie breakpoint. */ - REMOVE_BREAKPOINT_ZOMBIE(i); - } - break; - } - - if (old_chain != NULL) - do_cleanups (old_chain); - } - - /* Resume initial thread. */ - /* [unles it has a wait event pending] */ - if (!linuxthreads_pending_status (rpid)) - { - child_ops.to_resume (pid_to_ptid (rpid), step, signo); - } - } -} - -/* Abstract out the child_wait functionality. */ -int -linux_child_wait (int pid, int *rpid, int *status) -{ - int save_errno; - - /* Note: inftarg has these inside the loop. */ - set_sigint_trap (); /* Causes SIGINT to be passed on to the - attached process. */ - set_sigio_trap (); - - errno = save_errno = 0; - for (;;) - { - errno = 0; - *rpid = waitpid (pid, status, __WCLONE | WNOHANG); - save_errno = errno; - - if (*rpid > 0) - { - /* Got an event -- break out */ - break; - } - if (errno == EINTR) /* interrupted by signal, try again */ - { - continue; - } - - errno = 0; - *rpid = waitpid (pid, status, WNOHANG); - if (*rpid > 0) - { - /* Got an event -- break out */ - break; - } - if (errno == EINTR) - { - continue; - } - if (errno != 0 && save_errno != 0) - { - break; - } - sigsuspend(&linuxthreads_block_mask); - } - clear_sigio_trap (); - clear_sigint_trap (); - - return errno ? errno : save_errno; -} - - -/* Wait for any threads to stop. We may have to convert PID from a thread id - to a LWP id, and vice versa on the way out. */ - -static ptid_t -linuxthreads_wait (ptid_t ptid, struct target_waitstatus *ourstatus) -{ - int status; - int rpid; - int i; - int last; - int *wstatus; - int pid = PIDGET (ptid); - - if (linuxthreads_max && !linuxthreads_breakpoints_inserted) - wstatus = alloca (LINUXTHREAD_NSIG * sizeof (int)); - - /* See if the inferior has chosen values for its signals yet. By - checking for them here, we can be sure we've updated GDB's signal - handling table before the inferior ever gets one of them. (Well, - before we notice, anyway.) */ - check_all_signal_numbers (); - - for (;;) - { - if (!linuxthreads_max) - rpid = 0; - else if (!linuxthreads_breakpoints_inserted) - { - if (linuxthreads_inferior_pid) - pid = linuxthreads_inferior_pid; - else if (pid < 0) - pid = PIDGET (inferior_ptid); - last = rpid = 0; - } - else if (pid < 0 && linuxthreads_wait_last >= 0) - { - status = linuxthreads_wait_status[linuxthreads_wait_last]; - rpid = linuxthreads_wait_pid[linuxthreads_wait_last--]; - } - else if (pid > 0 && linuxthreads_pending_status (pid)) - { - for (i = linuxthreads_wait_last; i >= 0; i--) - if (linuxthreads_wait_pid[i] == pid) - break; - if (i < 0) - rpid = 0; - else - { - status = linuxthreads_wait_status[i]; - rpid = pid; - if (i < linuxthreads_wait_last) - { - linuxthreads_wait_status[i] = - linuxthreads_wait_status[linuxthreads_wait_last]; - linuxthreads_wait_pid[i] = - linuxthreads_wait_pid[linuxthreads_wait_last]; - } - linuxthreads_wait_last--; - } - } - else - rpid = 0; - - if (rpid == 0) - { - int save_errno; - - save_errno = linux_child_wait (pid, &rpid, &status); - - if (rpid == -1) - { - if (WIFEXITED(linuxthreads_exit_status)) - { - store_waitstatus (ourstatus, linuxthreads_exit_status); - return inferior_ptid; - } - else - { - fprintf_unfiltered - (gdb_stderr, "Child process unexpectedly missing: %s.\n", - safe_strerror (save_errno)); - /* Claim it exited with unknown signal. */ - ourstatus->kind = TARGET_WAITKIND_SIGNALLED; - ourstatus->value.sig = TARGET_SIGNAL_UNKNOWN; - return pid_to_ptid (-1); - } - } - - /* We have now gotten a new event from waitpid above. */ - - /* Signals arrive in any order. So get all signals until - SIGTRAP and resend previous ones to be held after. */ - if (linuxthreads_max - && !linuxthreads_breakpoints_inserted - && WIFSTOPPED(status)) - if (WSTOPSIG(status) == SIGTRAP) - { - while (--last >= 0) - { - kill (rpid, WSTOPSIG(wstatus[last])); - } - - /* insert negative zombie breakpoint */ - for (i = 0; i <= linuxthreads_breakpoint_last; i++) - if (linuxthreads_breakpoint_zombie[i].pid == rpid) - break; - if (i > linuxthreads_breakpoint_last) - { - linuxthreads_breakpoint_zombie[i].pid = rpid; - linuxthreads_breakpoint_last++; - } - linuxthreads_breakpoint_zombie[i].pc - = read_pc_pid (pid_to_ptid (rpid)); - linuxthreads_breakpoint_zombie[i].step = 1; - } - else - { - if (WSTOPSIG(status) != SIGSTOP) - { - for (i = 0; i < last; i++) - if (wstatus[i] == status) - break; - if (i >= last) - { - wstatus[last++] = status; - } - } - child_resume (pid_to_ptid (rpid), 1, TARGET_SIGNAL_0); - continue; - } - if (linuxthreads_inferior_pid) - linuxthreads_inferior_pid = 0; - } - - if (linuxthreads_max && !stop_soon_quietly) - { - if (linuxthreads_max - && WIFSTOPPED(status) - && WSTOPSIG(status) == SIGSTOP) - { - /* Skip SIGSTOP signals. */ - if (!linuxthreads_pending_status (rpid)) - { - if (linuxthreads_step_pid == rpid) - { - child_resume (pid_to_ptid (rpid), 1, - linuxthreads_step_signo); - } - else - { - child_resume (pid_to_ptid (rpid), 0, TARGET_SIGNAL_0); - } - } - continue; - } - - /* Do no report exit status of cloned threads. */ - if (WIFEXITED(status)) - { - if (rpid == linuxthreads_initial_pid) - linuxthreads_exit_status = status; - - /* Remove any zombie breakpoint. */ - for (i = 0; i <= linuxthreads_breakpoint_last; i++) - if (linuxthreads_breakpoint_zombie[i].pid == rpid) - { - REMOVE_BREAKPOINT_ZOMBIE(i); - break; - } - if (pid > 0) - pid = -1; - continue; - } - - /* Deal with zombie breakpoint */ - for (i = 0; i <= linuxthreads_breakpoint_last; i++) - if (linuxthreads_breakpoint_zombie[i].pid == rpid) - break; - - if (i <= linuxthreads_breakpoint_last) - { - /* There is a potential zombie breakpoint */ - if (WIFEXITED(status) - || linuxthreads_breakpoint_zombie[i].pc - != read_pc_pid (pid_to_ptid (rpid))) - { - /* The current pc is out of zombie breakpoint. */ - REMOVE_BREAKPOINT_ZOMBIE(i); - } - else if (!linuxthreads_breakpoint_zombie[i].step - && WIFSTOPPED(status) && WSTOPSIG(status) == SIGTRAP) - { - /* This is a real one ==> decrement PC and restart. */ - write_pc_pid (linuxthreads_breakpoint_zombie[i].pc - - DECR_PC_AFTER_BREAK, pid_to_ptid (rpid)); - if (linuxthreads_step_pid == rpid) - { - child_resume (pid_to_ptid (rpid), 1, linuxthreads_step_signo); - } - else - { - child_resume (pid_to_ptid (rpid), 0, TARGET_SIGNAL_0); - } - continue; - } - } - - /* Walk through linuxthreads array in order to stop them */ - if (linuxthreads_breakpoints_inserted) - update_stop_threads (rpid); - - } - else if (rpid != PIDGET (inferior_ptid)) - continue; - - store_waitstatus (ourstatus, status); - - if (linuxthreads_attach_pending && !stop_soon_quietly) - { - int on = 1; - if (!using_thread_db) - { - target_write_memory (linuxthreads_debug, - (char *) &on, sizeof (on)); - update_stop_threads (rpid); - } - linuxthreads_attach_pending = 0; - } - - if (linuxthreads_breakpoints_inserted - && WIFSTOPPED(status) - && WSTOPSIG(status) == SIGTRAP) - linuxthreads_breakpoint_pid = rpid; - else if (linuxthreads_breakpoint_pid) - linuxthreads_breakpoint_pid = 0; - - return pid_to_ptid (rpid); - } -} - -/* Fork an inferior process, and start debugging it with ptrace. */ - -static void -linuxthreads_create_inferior (char *exec_file, char *allargs, char **env) -{ - if (!exec_file && !exec_bfd) - { - error ("No executable file specified.\n\ -Use the \"file\" or \"exec-file\" command."); - return; - } - - push_target (&linuxthreads_ops); - linuxthreads_breakpoints_inserted = 1; - linuxthreads_breakpoint_last = -1; - linuxthreads_wait_last = -1; - WSETSTOP (linuxthreads_exit_status, 0); - - if (linuxthreads_max) - linuxthreads_attach_pending = 1; - - child_ops.to_create_inferior (exec_file, allargs, env); -} - -void -linuxthreads_discard_global_state (void) -{ - linuxthreads_inferior_pid = 0; - linuxthreads_breakpoint_pid = 0; - linuxthreads_step_pid = 0; - linuxthreads_step_signo = TARGET_SIGNAL_0; - linuxthreads_manager_pid = 0; - linuxthreads_initial_pid = 0; - linuxthreads_attach_pending = 0; - linuxthreads_max = 0; -} - -/* Clean up after the inferior dies. */ - -static void -linuxthreads_mourn_inferior (void) -{ - if (linuxthreads_max) - { - int off = 0; - target_write_memory (linuxthreads_debug, (char *)&off, sizeof (off)); - - linuxthreads_discard_global_state (); - init_thread_list(); /* Destroy thread info */ - } - - child_ops.to_mourn_inferior (); - - unpush_target (&linuxthreads_ops); -} - -/* Kill the inferior process */ - -static void -linuxthreads_kill (void) -{ - int rpid; - int status; - - if (PIDGET (inferior_ptid) == 0) - return; - - if (linuxthreads_max && linuxthreads_manager_pid != 0) - { - /* Remove all threads status. */ - inferior_ptid = pid_to_ptid (linuxthreads_manager_pid); - iterate_active_threads (kill_thread, 1); - } - - kill_thread (PIDGET (inferior_ptid)); - -#if 0 - /* doing_quit_force solves a real problem, but I think a properly - placed call to catch_errors would do the trick much more cleanly. */ - if (doing_quit_force >= 0) - { - if (linuxthreads_max && linuxthreads_manager_pid != 0) - { - /* Wait for thread to complete */ - while ((rpid = waitpid (-1, &status, __WCLONE)) > 0) - if (!WIFEXITED(status)) - kill_thread (rpid); - - while ((rpid = waitpid (-1, &status, 0)) > 0) - if (!WIFEXITED(status)) - kill_thread (rpid); - } - else - while ((rpid = waitpid (PIDGET (inferior_ptid), &status, 0)) > 0) - if (!WIFEXITED(status)) - ptrace (PT_KILL, PIDGET (inferior_ptid), (PTRACE_ARG3_TYPE) 0, 0); - } -#endif - - /* Wait for all threads. */ - do - { - rpid = waitpid (-1, &status, __WCLONE | WNOHANG); - } - while (rpid > 0 || errno == EINTR); - /* FIXME: should no longer need to handle EINTR here. */ - - do - { - rpid = waitpid (-1, &status, WNOHANG); - } - while (rpid > 0 || errno == EINTR); - /* FIXME: should no longer need to handle EINTR here. */ - - linuxthreads_mourn_inferior (); -} - -/* Insert a breakpoint */ - -static int -linuxthreads_insert_breakpoint (CORE_ADDR addr, char *contents_cache) -{ - if (linuxthreads_max && linuxthreads_manager_pid != 0) - { - linuxthreads_breakpoint_addr = addr; - iterate_active_threads (insert_breakpoint, 1); - insert_breakpoint (linuxthreads_manager_pid); - } - - return child_ops.to_insert_breakpoint (addr, contents_cache); -} - -/* Remove a breakpoint */ - -static int -linuxthreads_remove_breakpoint (CORE_ADDR addr, char *contents_cache) -{ - if (linuxthreads_max && linuxthreads_manager_pid != 0) - { - linuxthreads_breakpoint_addr = addr; - iterate_active_threads (remove_breakpoint, 1); - remove_breakpoint (linuxthreads_manager_pid); - } - - return child_ops.to_remove_breakpoint (addr, contents_cache); -} - -/* Mark our target-struct as eligible for stray "run" and "attach" commands. */ - -static int -linuxthreads_can_run (void) -{ - return child_suppress_run; -} - - -static void -init_linuxthreads_ops (void) -{ - linuxthreads_ops.to_shortname = "linuxthreads"; - linuxthreads_ops.to_longname = "LINUX threads and pthread."; - linuxthreads_ops.to_doc = "LINUX threads and pthread support."; - linuxthreads_ops.to_attach = linuxthreads_attach; - linuxthreads_ops.to_detach = linuxthreads_detach; - linuxthreads_ops.to_resume = linuxthreads_resume; - linuxthreads_ops.to_wait = linuxthreads_wait; - linuxthreads_ops.to_kill = linuxthreads_kill; - linuxthreads_ops.to_can_run = linuxthreads_can_run; - linuxthreads_ops.to_stratum = thread_stratum; - linuxthreads_ops.to_insert_breakpoint = linuxthreads_insert_breakpoint; - linuxthreads_ops.to_remove_breakpoint = linuxthreads_remove_breakpoint; - linuxthreads_ops.to_create_inferior = linuxthreads_create_inferior; - linuxthreads_ops.to_mourn_inferior = linuxthreads_mourn_inferior; - linuxthreads_ops.to_thread_alive = linuxthreads_thread_alive; - linuxthreads_ops.to_pid_to_str = linuxthreads_pid_to_str; - linuxthreads_ops.to_magic = OPS_MAGIC; -} - -void -_initialize_linuxthreads (void) -{ - struct sigaction sact; - sigset_t linuxthreads_wait_mask; /* sigset with SIGCHLD */ - - init_linuxthreads_ops (); - add_target (&linuxthreads_ops); - child_suppress_run = 1; - - /* Hook onto the "new_objfile" event. - * If someone else is already hooked onto the event, - * then make sure he will be called after we are. - */ - target_new_objfile_chain = target_new_objfile_hook; - target_new_objfile_hook = linuxthreads_new_objfile; - - /* Attach SIGCHLD handler */ - sact.sa_handler = sigchld_handler; - sigemptyset (&sact.sa_mask); - sact.sa_flags = 0; - sigaction (SIGCHLD, &sact, NULL); - - /* initialize SIGCHLD mask */ - sigemptyset (&linuxthreads_wait_mask); - sigaddset (&linuxthreads_wait_mask, SIGCHLD); - - /* Use SIG_BLOCK to block receipt of SIGCHLD. - The block_mask will allow us to wait for this signal explicitly. */ - sigprocmask(SIG_BLOCK, - &linuxthreads_wait_mask, - &linuxthreads_block_mask); - /* Make sure that linuxthreads_block_mask is not blocking SIGCHLD */ - sigdelset (&linuxthreads_block_mask, SIGCHLD); -} -- 2.34.1