From 900ef800a2a4c08aa28af4785a5b2d5d7e199103 Mon Sep 17 00:00:00 2001 From: Mike Looijmans Date: Fri, 14 Mar 2014 07:42:28 +0100 Subject: [PATCH] i2c: davinci: don't use interruptible completion When a signal is caught while the i2c-davinci bus driver is transferring, the driver just "abandons" the transfer and leaves the controller to fend for itself. The next I2C transaction will find the controller in an undefined state and often results in a stream of "initiating i2c bus recovery" messages until the controller arrives in a defined state. This behaviour also sends out "half" or possibly even mixed messages to I2C client devices which may put them in an undesired state as well. So, let's get simply uninterruptible. Signed-off-by: Mike Looijmans Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-davinci.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/i2c/busses/i2c-davinci.c b/drivers/i2c/busses/i2c-davinci.c index d15b7c9b9219..91c43decf327 100644 --- a/drivers/i2c/busses/i2c-davinci.c +++ b/drivers/i2c/busses/i2c-davinci.c @@ -368,8 +368,7 @@ i2c_davinci_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg, int stop) flag |= DAVINCI_I2C_MDR_STP; davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, flag); - r = wait_for_completion_interruptible_timeout(&dev->cmd_complete, - dev->adapter.timeout); + r = wait_for_completion_timeout(&dev->cmd_complete, dev->adapter.timeout); if (r == 0) { dev_err(dev->dev, "controller timed out\n"); davinci_i2c_recover_bus(dev); @@ -380,7 +379,6 @@ i2c_davinci_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg, int stop) if (dev->buf_len) { /* This should be 0 if all bytes were transferred * or dev->cmd_err denotes an error. - * A signal may have aborted the transfer. */ if (r >= 0) { dev_err(dev->dev, "abnormal termination buf_len=%i\n", -- 2.34.1