From 9320b5c4a7260d9593102f378201d17e3f030739 Mon Sep 17 00:00:00 2001 From: Nick Kossifidis Date: Tue, 23 Nov 2010 20:36:45 +0200 Subject: [PATCH] ath5k: Reset cleanup and generic cleanup * No functional changes * Clean up reset: Introduce init functions for each unit and call them instead of having everything inside ath5k_hw_reset (it's just c/p for now so nothing changes except calling order -I tested it with various cards and it's ok-) * Further cleanups: ofdm_timings belongs to phy.c rate_duration belongs to pcu.c clock functions are general and belong to reset.c (more to follow) * Reorder functions for better organization: We start with helpers and other functions follow in categories, init functions are last Signed-off-by: Nick Kossifidis Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath5k/ani.c | 6 +- drivers/net/wireless/ath/ath5k/ath5k.h | 60 ++- drivers/net/wireless/ath/ath5k/desc.c | 24 +- drivers/net/wireless/ath/ath5k/dma.c | 45 ++ drivers/net/wireless/ath/ath5k/eeprom.c | 147 +++--- drivers/net/wireless/ath/ath5k/pcu.c | 438 +++++++++------- drivers/net/wireless/ath/ath5k/phy.c | 444 ++++++++++++---- drivers/net/wireless/ath/ath5k/qcu.c | 130 +++-- drivers/net/wireless/ath/ath5k/reset.c | 642 +++++++----------------- 9 files changed, 1042 insertions(+), 894 deletions(-) diff --git a/drivers/net/wireless/ath/ath5k/ani.c b/drivers/net/wireless/ath/ath5k/ani.c index 6b75b22a929a..f915f404302d 100644 --- a/drivers/net/wireless/ath/ath5k/ani.c +++ b/drivers/net/wireless/ath/ath5k/ani.c @@ -58,19 +58,19 @@ ath5k_ani_set_noise_immunity_level(struct ath5k_hw *ah, int level) { /* TODO: * ANI documents suggest the following five levels to use, but the HAL - * and ath9k use only use the last two levels, making this + * and ath9k use only the last two levels, making this * essentially an on/off option. There *may* be a reason for this (???), * so i stick with the HAL version for now... */ #if 0 - static const s8 hi[] = { -18, -18, -16, -14, -12 }; static const s8 lo[] = { -52, -56, -60, -64, -70 }; + static const s8 hi[] = { -18, -18, -16, -14, -12 }; static const s8 sz[] = { -34, -41, -48, -55, -62 }; static const s8 fr[] = { -70, -72, -75, -78, -80 }; #else - static const s8 sz[] = { -55, -62 }; static const s8 lo[] = { -64, -70 }; static const s8 hi[] = { -14, -12 }; + static const s8 sz[] = { -55, -62 }; static const s8 fr[] = { -78, -80 }; #endif if (level < 0 || level >= ARRAY_SIZE(sz)) { diff --git a/drivers/net/wireless/ath/ath5k/ath5k.h b/drivers/net/wireless/ath/ath5k/ath5k.h index 2718136e4886..85ff822c81f4 100644 --- a/drivers/net/wireless/ath/ath5k/ath5k.h +++ b/drivers/net/wireless/ath/ath5k/ath5k.h @@ -1140,12 +1140,14 @@ void ath5k_hw_detach(struct ath5k_hw *ah); int ath5k_sysfs_register(struct ath5k_softc *sc); void ath5k_sysfs_unregister(struct ath5k_softc *sc); + /* LED functions */ int ath5k_init_leds(struct ath5k_softc *sc); void ath5k_led_enable(struct ath5k_softc *sc); void ath5k_led_off(struct ath5k_softc *sc); void ath5k_unregister_leds(struct ath5k_softc *sc); + /* Reset Functions */ int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, int flags, bool initial); int ath5k_hw_on_hold(struct ath5k_hw *ah); @@ -1155,6 +1157,13 @@ int ath5k_hw_register_timeout(struct ath5k_hw *ah, u32 reg, u32 flag, u32 val, bool is_set); /* Power management functions */ + +/* Clock rate related functions */ +unsigned int ath5k_hw_htoclock(struct ath5k_hw *ah, unsigned int usec); +unsigned int ath5k_hw_clocktoh(struct ath5k_hw *ah, unsigned int clock); +void ath5k_hw_set_clockrate(struct ath5k_hw *ah); + + /* DMA Related Functions */ void ath5k_hw_start_rx_dma(struct ath5k_hw *ah); int ath5k_hw_stop_rx_dma(struct ath5k_hw *ah); @@ -1171,26 +1180,28 @@ bool ath5k_hw_is_intr_pending(struct ath5k_hw *ah); int ath5k_hw_get_isr(struct ath5k_hw *ah, enum ath5k_int *interrupt_mask); enum ath5k_int ath5k_hw_set_imr(struct ath5k_hw *ah, enum ath5k_int new_mask); void ath5k_hw_update_mib_counters(struct ath5k_hw *ah); +/* Init function */ +void ath5k_hw_dma_init(struct ath5k_hw *ah); /* EEPROM access functions */ int ath5k_eeprom_init(struct ath5k_hw *ah); void ath5k_eeprom_detach(struct ath5k_hw *ah); int ath5k_eeprom_read_mac(struct ath5k_hw *ah, u8 *mac); + /* Protocol Control Unit Functions */ extern int ath5k_hw_set_opmode(struct ath5k_hw *ah, enum nl80211_iftype opmode); void ath5k_hw_set_coverage_class(struct ath5k_hw *ah, u8 coverage_class); -/* BSSID Functions */ +/* RX filter control*/ int ath5k_hw_set_lladdr(struct ath5k_hw *ah, const u8 *mac); void ath5k_hw_set_bssid(struct ath5k_hw *ah); void ath5k_hw_set_bssid_mask(struct ath5k_hw *ah, const u8 *mask); -/* Receive start/stop functions */ -void ath5k_hw_start_rx_pcu(struct ath5k_hw *ah); -void ath5k_hw_stop_rx_pcu(struct ath5k_hw *ah); -/* RX Filter functions */ void ath5k_hw_set_mcast_filter(struct ath5k_hw *ah, u32 filter0, u32 filter1); u32 ath5k_hw_get_rx_filter(struct ath5k_hw *ah); void ath5k_hw_set_rx_filter(struct ath5k_hw *ah, u32 filter); +/* Receive (DRU) start/stop functions */ +void ath5k_hw_start_rx_pcu(struct ath5k_hw *ah); +void ath5k_hw_stop_rx_pcu(struct ath5k_hw *ah); /* Beacon control functions */ u64 ath5k_hw_get_tsf64(struct ath5k_hw *ah); void ath5k_hw_set_tsf64(struct ath5k_hw *ah, u64 tsf64); @@ -1199,10 +1210,9 @@ void ath5k_hw_init_beacon(struct ath5k_hw *ah, u32 next_beacon, u32 interval); bool ath5k_hw_check_beacon_timers(struct ath5k_hw *ah, int intval); /* ACK bit rate */ void ath5k_hw_set_ack_bitrate_high(struct ath5k_hw *ah, bool high); -/* Clock rate related functions */ -unsigned int ath5k_hw_htoclock(struct ath5k_hw *ah, unsigned int usec); -unsigned int ath5k_hw_clocktoh(struct ath5k_hw *ah, unsigned int clock); -void ath5k_hw_set_clockrate(struct ath5k_hw *ah); +/* Init function */ +void ath5k_hw_pcu_init(struct ath5k_hw *ah, enum nl80211_iftype op_mode, + u8 mode); /* Queue Control Unit, DFS Control Unit Functions */ int ath5k_hw_get_tx_queueprops(struct ath5k_hw *ah, int queue, @@ -1216,6 +1226,8 @@ u32 ath5k_hw_num_tx_pending(struct ath5k_hw *ah, unsigned int queue); void ath5k_hw_release_tx_queue(struct ath5k_hw *ah, unsigned int queue); int ath5k_hw_reset_tx_queue(struct ath5k_hw *ah, unsigned int queue); int ath5k_hw_set_slot_time(struct ath5k_hw *ah, unsigned int slot_time); +/* Init function */ +int ath5k_hw_init_queues(struct ath5k_hw *ah); /* Hardware Descriptor Functions */ int ath5k_hw_init_desc_functions(struct ath5k_hw *ah); @@ -1225,6 +1237,7 @@ int ath5k_hw_setup_mrr_tx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc, unsigned int tx_rate1, u_int tx_tries1, u_int tx_rate2, u_int tx_tries2, unsigned int tx_rate3, u_int tx_tries3); + /* GPIO Functions */ void ath5k_hw_set_ledstate(struct ath5k_hw *ah, unsigned int state); int ath5k_hw_set_gpio_input(struct ath5k_hw *ah, u32 gpio); @@ -1234,11 +1247,13 @@ int ath5k_hw_set_gpio(struct ath5k_hw *ah, u32 gpio, u32 val); void ath5k_hw_set_gpio_intr(struct ath5k_hw *ah, unsigned int gpio, u32 interrupt_level); -/* rfkill Functions */ + +/* RFkill Functions */ void ath5k_rfkill_hw_start(struct ath5k_hw *ah); void ath5k_rfkill_hw_stop(struct ath5k_hw *ah); -/* Misc functions */ + +/* Misc functions TODO: Cleanup */ int ath5k_hw_set_capabilities(struct ath5k_hw *ah); int ath5k_hw_get_capability(struct ath5k_hw *ah, enum ath5k_capability_type cap_type, u32 capability, @@ -1246,19 +1261,20 @@ int ath5k_hw_get_capability(struct ath5k_hw *ah, int ath5k_hw_enable_pspoll(struct ath5k_hw *ah, u8 *bssid, u16 assoc_id); int ath5k_hw_disable_pspoll(struct ath5k_hw *ah); + /* Initial register settings functions */ int ath5k_hw_write_initvals(struct ath5k_hw *ah, u8 mode, bool change_channel); -/* Initialize RF */ -int ath5k_hw_rfregs_init(struct ath5k_hw *ah, - struct ieee80211_channel *channel, - unsigned int mode); -int ath5k_hw_rfgain_init(struct ath5k_hw *ah, unsigned int freq); + +/* PHY functions */ +/* Misc PHY functions */ +u16 ath5k_hw_radio_revision(struct ath5k_hw *ah, unsigned int chan); +int ath5k_hw_phy_disable(struct ath5k_hw *ah); +/* Gain_F optimization */ enum ath5k_rfgain ath5k_hw_gainf_calibrate(struct ath5k_hw *ah); int ath5k_hw_rfgain_opt_init(struct ath5k_hw *ah); /* PHY/RF channel functions */ bool ath5k_channel_ok(struct ath5k_hw *ah, u16 freq, unsigned int flags); -int ath5k_hw_channel(struct ath5k_hw *ah, struct ieee80211_channel *channel); /* PHY calibration */ void ath5k_hw_init_nfcal_hist(struct ath5k_hw *ah); int ath5k_hw_phy_calibrate(struct ath5k_hw *ah, @@ -1267,18 +1283,14 @@ void ath5k_hw_update_noise_floor(struct ath5k_hw *ah); /* Spur mitigation */ bool ath5k_hw_chan_has_spur_noise(struct ath5k_hw *ah, struct ieee80211_channel *channel); -void ath5k_hw_set_spur_mitigation_filter(struct ath5k_hw *ah, - struct ieee80211_channel *channel); -/* Misc PHY functions */ -u16 ath5k_hw_radio_revision(struct ath5k_hw *ah, unsigned int chan); -int ath5k_hw_phy_disable(struct ath5k_hw *ah); /* Antenna control */ void ath5k_hw_set_antenna_mode(struct ath5k_hw *ah, u8 ant_mode); void ath5k_hw_set_antenna_switch(struct ath5k_hw *ah, u8 ee_mode); /* TX power setup */ -int ath5k_hw_txpower(struct ath5k_hw *ah, struct ieee80211_channel *channel, - u8 ee_mode, u8 txpower); int ath5k_hw_set_txpower_limit(struct ath5k_hw *ah, u8 txpower); +/* Init function */ +int ath5k_hw_phy_init(struct ath5k_hw *ah, struct ieee80211_channel *channel, + u8 mode, u8 ee_mode, u8 freq); /* * Functions used internaly diff --git a/drivers/net/wireless/ath/ath5k/desc.c b/drivers/net/wireless/ath/ath5k/desc.c index 43244382f213..16b44ff7dd3e 100644 --- a/drivers/net/wireless/ath/ath5k/desc.c +++ b/drivers/net/wireless/ath/ath5k/desc.c @@ -26,9 +26,10 @@ #include "debug.h" #include "base.h" -/* - * TX Descriptors - */ + +/************************\ +* TX Control descriptors * +\************************/ /* * Initialize the 2-word tx control descriptor on 5210/5211 @@ -335,6 +336,11 @@ ath5k_hw_setup_mrr_tx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc, return 0; } + +/***********************\ +* TX Status descriptors * +\***********************/ + /* * Proccess the tx status descriptor on 5210/5211 */ @@ -476,9 +482,10 @@ static int ath5k_hw_proc_4word_tx_status(struct ath5k_hw *ah, return 0; } -/* - * RX Descriptors - */ + +/****************\ +* RX Descriptors * +\****************/ /* * Initialize an rx control descriptor @@ -666,6 +673,11 @@ static int ath5k_hw_proc_5212_rx_status(struct ath5k_hw *ah, return 0; } + +/********\ +* Attach * +\********/ + /* * Init function pointers inside ath5k_hw struct */ diff --git a/drivers/net/wireless/ath/ath5k/dma.c b/drivers/net/wireless/ath/ath5k/dma.c index 923c9ca5c4f0..b991b0585090 100644 --- a/drivers/net/wireless/ath/ath5k/dma.c +++ b/drivers/net/wireless/ath/ath5k/dma.c @@ -37,6 +37,7 @@ #include "debug.h" #include "base.h" + /*********\ * Receive * \*********/ @@ -427,6 +428,7 @@ done: return ret; } + /*******************\ * Interrupt masking * \*******************/ @@ -688,3 +690,46 @@ enum ath5k_int ath5k_hw_set_imr(struct ath5k_hw *ah, enum ath5k_int new_mask) return old_mask; } + +/********************\ + Init/Stop functions +\********************/ + +/** + * ath5k_hw_dma_init - Initialize DMA unit + * + * @ah: The &struct ath5k_hw + * + * Set DMA size and pre-enable interrupts + * (driver handles tx/rx buffer setup and + * dma start/stop) + * + * XXX: Save/restore RXDP/TXDP registers ? + */ +void ath5k_hw_dma_init(struct ath5k_hw *ah) +{ + /* + * Set Rx/Tx DMA Configuration + * + * Set standard DMA size (128). Note that + * a DMA size of 512 causes rx overruns and tx errors + * on pci-e cards (tested on 5424 but since rx overruns + * also occur on 5416/5418 with madwifi we set 128 + * for all PCI-E cards to be safe). + * + * XXX: need to check 5210 for this + * TODO: Check out tx triger level, it's always 64 on dumps but I + * guess we can tweak it and see how it goes ;-) + */ + if (ah->ah_version != AR5K_AR5210) { + AR5K_REG_WRITE_BITS(ah, AR5K_TXCFG, + AR5K_TXCFG_SDMAMR, AR5K_DMASIZE_128B); + AR5K_REG_WRITE_BITS(ah, AR5K_RXCFG, + AR5K_RXCFG_SDMAMW, AR5K_DMASIZE_128B); + } + + /* Pre-enable interrupts on 5211/5212*/ + if (ah->ah_version != AR5K_AR5210) + ath5k_hw_set_imr(ah, ah->ah_imr); + +} diff --git a/drivers/net/wireless/ath/ath5k/eeprom.c b/drivers/net/wireless/ath/ath5k/eeprom.c index 39722dd73e43..033eab9ad4e7 100644 --- a/drivers/net/wireless/ath/ath5k/eeprom.c +++ b/drivers/net/wireless/ath/ath5k/eeprom.c @@ -28,6 +28,43 @@ #include "debug.h" #include "base.h" + +/******************\ +* Helper functions * +\******************/ + +/* + * Translate binary channel representation in EEPROM to frequency + */ +static u16 ath5k_eeprom_bin2freq(struct ath5k_eeprom_info *ee, u16 bin, + unsigned int mode) +{ + u16 val; + + if (bin == AR5K_EEPROM_CHANNEL_DIS) + return bin; + + if (mode == AR5K_EEPROM_MODE_11A) { + if (ee->ee_version > AR5K_EEPROM_VERSION_3_2) + val = (5 * bin) + 4800; + else + val = bin > 62 ? (10 * 62) + (5 * (bin - 62)) + 5100 : + (bin * 10) + 5100; + } else { + if (ee->ee_version > AR5K_EEPROM_VERSION_3_2) + val = bin + 2300; + else + val = bin + 2400; + } + + return val; +} + + +/*********\ +* Parsers * +\*********/ + /* * Read from eeprom */ @@ -62,33 +99,6 @@ static int ath5k_hw_eeprom_read(struct ath5k_hw *ah, u32 offset, u16 *data) return -ETIMEDOUT; } -/* - * Translate binary channel representation in EEPROM to frequency - */ -static u16 ath5k_eeprom_bin2freq(struct ath5k_eeprom_info *ee, u16 bin, - unsigned int mode) -{ - u16 val; - - if (bin == AR5K_EEPROM_CHANNEL_DIS) - return bin; - - if (mode == AR5K_EEPROM_MODE_11A) { - if (ee->ee_version > AR5K_EEPROM_VERSION_3_2) - val = (5 * bin) + 4800; - else - val = bin > 62 ? (10 * 62) + (5 * (bin - 62)) + 5100 : - (bin * 10) + 5100; - } else { - if (ee->ee_version > AR5K_EEPROM_VERSION_3_2) - val = bin + 2300; - else - val = bin + 2400; - } - - return val; -} - /* * Initialize eeprom & capabilities structs */ @@ -647,6 +657,7 @@ ath5k_eeprom_init_11bg_2413(struct ath5k_hw *ah, unsigned int mode, int offset) return 0; } + /* * Read power calibration for RF5111 chips * @@ -1514,6 +1525,7 @@ ath5k_eeprom_read_target_rate_pwr_info(struct ath5k_hw *ah, unsigned int mode) return 0; } + /* * Read per channel calibration info from EEPROM * @@ -1607,15 +1619,6 @@ ath5k_eeprom_free_pcal_info(struct ath5k_hw *ah, int mode) return 0; } -void -ath5k_eeprom_detach(struct ath5k_hw *ah) -{ - u8 mode; - - for (mode = AR5K_EEPROM_MODE_11A; mode <= AR5K_EEPROM_MODE_11G; mode++) - ath5k_eeprom_free_pcal_info(ah, mode); -} - /* Read conformance test limits used for regulatory control */ static int ath5k_eeprom_read_ctl_info(struct ath5k_hw *ah) @@ -1756,6 +1759,44 @@ ath5k_eeprom_read_spur_chans(struct ath5k_hw *ah) return ret; } +/* + * Read the MAC address from eeprom + */ +int ath5k_eeprom_read_mac(struct ath5k_hw *ah, u8 *mac) +{ + u8 mac_d[ETH_ALEN] = {}; + u32 total, offset; + u16 data; + int octet, ret; + + ret = ath5k_hw_eeprom_read(ah, 0x20, &data); + if (ret) + return ret; + + for (offset = 0x1f, octet = 0, total = 0; offset >= 0x1d; offset--) { + ret = ath5k_hw_eeprom_read(ah, offset, &data); + if (ret) + return ret; + + total += data; + mac_d[octet + 1] = data & 0xff; + mac_d[octet] = data >> 8; + octet += 2; + } + + if (!total || total == 3 * 0xffff) + return -EINVAL; + + memcpy(mac, mac_d, ETH_ALEN); + + return 0; +} + + +/***********************\ +* Init/Detach functions * +\***********************/ + /* * Initialize eeprom data structure */ @@ -1787,35 +1828,11 @@ ath5k_eeprom_init(struct ath5k_hw *ah) return 0; } -/* - * Read the MAC address from eeprom - */ -int ath5k_eeprom_read_mac(struct ath5k_hw *ah, u8 *mac) +void +ath5k_eeprom_detach(struct ath5k_hw *ah) { - u8 mac_d[ETH_ALEN] = {}; - u32 total, offset; - u16 data; - int octet, ret; - - ret = ath5k_hw_eeprom_read(ah, 0x20, &data); - if (ret) - return ret; - - for (offset = 0x1f, octet = 0, total = 0; offset >= 0x1d; offset--) { - ret = ath5k_hw_eeprom_read(ah, offset, &data); - if (ret) - return ret; - - total += data; - mac_d[octet + 1] = data & 0xff; - mac_d[octet] = data >> 8; - octet += 2; - } - - if (!total || total == 3 * 0xffff) - return -EINVAL; - - memcpy(mac, mac_d, ETH_ALEN); + u8 mode; - return 0; + for (mode = AR5K_EEPROM_MODE_11A; mode <= AR5K_EEPROM_MODE_11G; mode++) + ath5k_eeprom_free_pcal_info(ah, mode); } diff --git a/drivers/net/wireless/ath/ath5k/pcu.c b/drivers/net/wireless/ath/ath5k/pcu.c index 074b4c644399..2c2ea1539849 100644 --- a/drivers/net/wireless/ath/ath5k/pcu.c +++ b/drivers/net/wireless/ath/ath5k/pcu.c @@ -32,86 +32,47 @@ #include "base.h" /*******************\ -* Generic functions * +* Helper functions * \*******************/ /** - * ath5k_hw_set_opmode - Set PCU operating mode + * ath5k_hw_get_default_slottime - Get the default slot time for current mode * * @ah: The &struct ath5k_hw - * @op_mode: &enum nl80211_iftype operating mode - * - * Initialize PCU for the various operating modes (AP/STA etc) */ -int ath5k_hw_set_opmode(struct ath5k_hw *ah, enum nl80211_iftype op_mode) +static unsigned int ath5k_hw_get_default_slottime(struct ath5k_hw *ah) { - struct ath_common *common = ath5k_hw_common(ah); - u32 pcu_reg, beacon_reg, low_id, high_id; - - ATH5K_DBG(ah->ah_sc, ATH5K_DEBUG_MODE, "mode %d\n", op_mode); - - /* Preserve rest settings */ - pcu_reg = ath5k_hw_reg_read(ah, AR5K_STA_ID1) & 0xffff0000; - pcu_reg &= ~(AR5K_STA_ID1_ADHOC | AR5K_STA_ID1_AP - | AR5K_STA_ID1_KEYSRCH_MODE - | (ah->ah_version == AR5K_AR5210 ? - (AR5K_STA_ID1_PWR_SV | AR5K_STA_ID1_NO_PSPOLL) : 0)); - - beacon_reg = 0; + struct ieee80211_channel *channel = ah->ah_current_channel; - switch (op_mode) { - case NL80211_IFTYPE_ADHOC: - pcu_reg |= AR5K_STA_ID1_ADHOC | AR5K_STA_ID1_KEYSRCH_MODE; - beacon_reg |= AR5K_BCR_ADHOC; - if (ah->ah_version == AR5K_AR5210) - pcu_reg |= AR5K_STA_ID1_NO_PSPOLL; - else - AR5K_REG_ENABLE_BITS(ah, AR5K_CFG, AR5K_CFG_IBSS); - break; + if (channel->hw_value & CHANNEL_TURBO) + return 6; /* both turbo modes */ - case NL80211_IFTYPE_AP: - case NL80211_IFTYPE_MESH_POINT: - pcu_reg |= AR5K_STA_ID1_AP | AR5K_STA_ID1_KEYSRCH_MODE; - beacon_reg |= AR5K_BCR_AP; - if (ah->ah_version == AR5K_AR5210) - pcu_reg |= AR5K_STA_ID1_NO_PSPOLL; - else - AR5K_REG_DISABLE_BITS(ah, AR5K_CFG, AR5K_CFG_IBSS); - break; + if (channel->hw_value & CHANNEL_CCK) + return 20; /* 802.11b */ - case NL80211_IFTYPE_STATION: - pcu_reg |= AR5K_STA_ID1_KEYSRCH_MODE - | (ah->ah_version == AR5K_AR5210 ? - AR5K_STA_ID1_PWR_SV : 0); - case NL80211_IFTYPE_MONITOR: - pcu_reg |= AR5K_STA_ID1_KEYSRCH_MODE - | (ah->ah_version == AR5K_AR5210 ? - AR5K_STA_ID1_NO_PSPOLL : 0); - break; + return 9; /* 802.11 a/g */ +} - default: - return -EINVAL; - } +/** + * ath5k_hw_get_default_sifs - Get the default SIFS for current mode + * + * @ah: The &struct ath5k_hw + */ +static unsigned int ath5k_hw_get_default_sifs(struct ath5k_hw *ah) +{ + struct ieee80211_channel *channel = ah->ah_current_channel; - /* - * Set PCU registers - */ - low_id = get_unaligned_le32(common->macaddr); - high_id = get_unaligned_le16(common->macaddr + 4); - ath5k_hw_reg_write(ah, low_id, AR5K_STA_ID0); - ath5k_hw_reg_write(ah, pcu_reg | high_id, AR5K_STA_ID1); + if (channel->hw_value & CHANNEL_TURBO) + return 8; /* both turbo modes */ - /* - * Set Beacon Control Register on 5210 - */ - if (ah->ah_version == AR5K_AR5210) - ath5k_hw_reg_write(ah, beacon_reg, AR5K_BCR); + if (channel->hw_value & CHANNEL_5GHZ) + return 16; /* 802.11a */ - return 0; + return 10; /* 802.11 b/g */ } /** - * ath5k_hw_update - Update MIB counters (mac layer statistics) + * ath5k_hw_update_mib_counters - Update MIB counters (mac layer statistics) * * @ah: The &struct ath5k_hw * @@ -163,6 +124,82 @@ void ath5k_hw_set_ack_bitrate_high(struct ath5k_hw *ah, bool high) * ACK/CTS Timeouts * \******************/ +/* + * index into rates for control rates, we can set it up like this because + * this is only used for AR5212 and we know it supports G mode + */ +static const unsigned int control_rates[] = + { 0, 1, 1, 1, 4, 4, 6, 6, 8, 8, 8, 8 }; + +/** + * ath5k_hw_write_rate_duration - fill rate code to duration table + * + * @ah: the &struct ath5k_hw + * @mode: one of enum ath5k_driver_mode + * + * Write the rate code to duration table upon hw reset. This is a helper for + * ath5k_hw_reset(). It seems all this is doing is setting an ACK timeout on + * the hardware, based on current mode, for each rate. The rates which are + * capable of short preamble (802.11b rates 2Mbps, 5.5Mbps, and 11Mbps) have + * different rate code so we write their value twice (one for long preamble + * and one for short). + * + * Note: Band doesn't matter here, if we set the values for OFDM it works + * on both a and g modes. So all we have to do is set values for all g rates + * that include all OFDM and CCK rates. If we operate in turbo or xr/half/ + * quarter rate mode, we need to use another set of bitrates (that's why we + * need the mode parameter) but we don't handle these proprietary modes yet. + */ +static inline void ath5k_hw_write_rate_duration(struct ath5k_hw *ah, + unsigned int mode) +{ + struct ath5k_softc *sc = ah->ah_sc; + struct ieee80211_rate *rate; + unsigned int i; + + /* Write rate duration table */ + for (i = 0; i < sc->sbands[IEEE80211_BAND_2GHZ].n_bitrates; i++) { + u32 reg; + u16 tx_time; + + rate = &sc->sbands[IEEE80211_BAND_2GHZ].bitrates[control_rates[i]]; + + /* Set ACK timeout */ + reg = AR5K_RATE_DUR(rate->hw_value); + + /* An ACK frame consists of 10 bytes. If you add the FCS, + * which ieee80211_generic_frame_duration() adds, + * its 14 bytes. Note we use the control rate and not the + * actual rate for this rate. See mac80211 tx.c + * ieee80211_duration() for a brief description of + * what rate we should choose to TX ACKs. */ + tx_time = le16_to_cpu(ieee80211_generic_frame_duration(sc->hw, + NULL, 10, rate)); + + ath5k_hw_reg_write(ah, tx_time, reg); + + if (!(rate->flags & IEEE80211_RATE_SHORT_PREAMBLE)) + continue; + + /* + * We're not distinguishing short preamble here, + * This is true, all we'll get is a longer value here + * which is not necessarilly bad. We could use + * export ieee80211_frame_duration() but that needs to be + * fixed first to be properly used by mac802111 drivers: + * + * - remove erp stuff and let the routine figure ofdm + * erp rates + * - remove passing argument ieee80211_local as + * drivers don't have access to it + * - move drivers using ieee80211_generic_frame_duration() + * to this + */ + ath5k_hw_reg_write(ah, tx_time, + reg + (AR5K_SET_SHORT_PREAMBLE << 2)); + } +} + /** * ath5k_hw_set_ack_timeout - Set ACK timeout on PCU * @@ -199,88 +236,10 @@ static int ath5k_hw_set_cts_timeout(struct ath5k_hw *ah, unsigned int timeout) return 0; } -/** - * ath5k_hw_htoclock - Translate usec to hw clock units - * - * @ah: The &struct ath5k_hw - * @usec: value in microseconds - */ -unsigned int ath5k_hw_htoclock(struct ath5k_hw *ah, unsigned int usec) -{ - struct ath_common *common = ath5k_hw_common(ah); - return usec * common->clockrate; -} - -/** - * ath5k_hw_clocktoh - Translate hw clock units to usec - * @clock: value in hw clock units - */ -unsigned int ath5k_hw_clocktoh(struct ath5k_hw *ah, unsigned int clock) -{ - struct ath_common *common = ath5k_hw_common(ah); - return clock / common->clockrate; -} - -/** - * ath5k_hw_set_clockrate - Set common->clockrate for the current channel - * - * @ah: The &struct ath5k_hw - */ -void ath5k_hw_set_clockrate(struct ath5k_hw *ah) -{ - struct ieee80211_channel *channel = ah->ah_current_channel; - struct ath_common *common = ath5k_hw_common(ah); - int clock; - - if (channel->hw_value & CHANNEL_5GHZ) - clock = 40; /* 802.11a */ - else if (channel->hw_value & CHANNEL_CCK) - clock = 22; /* 802.11b */ - else - clock = 44; /* 802.11g */ - - /* Clock rate in turbo modes is twice the normal rate */ - if (channel->hw_value & CHANNEL_TURBO) - clock *= 2; - - common->clockrate = clock; -} - -/** - * ath5k_hw_get_default_slottime - Get the default slot time for current mode - * - * @ah: The &struct ath5k_hw - */ -static unsigned int ath5k_hw_get_default_slottime(struct ath5k_hw *ah) -{ - struct ieee80211_channel *channel = ah->ah_current_channel; - - if (channel->hw_value & CHANNEL_TURBO) - return 6; /* both turbo modes */ - - if (channel->hw_value & CHANNEL_CCK) - return 20; /* 802.11b */ - - return 9; /* 802.11 a/g */ -} - -/** - * ath5k_hw_get_default_sifs - Get the default SIFS for current mode - * - * @ah: The &struct ath5k_hw - */ -static unsigned int ath5k_hw_get_default_sifs(struct ath5k_hw *ah) -{ - struct ieee80211_channel *channel = ah->ah_current_channel; - - if (channel->hw_value & CHANNEL_TURBO) - return 8; /* both turbo modes */ - - if (channel->hw_value & CHANNEL_5GHZ) - return 16; /* 802.11a */ - return 10; /* 802.11 b/g */ -} +/*******************\ +* RX filter Control * +\*******************/ /** * ath5k_hw_set_lladdr - Set station id @@ -362,39 +321,6 @@ void ath5k_hw_set_bssid_mask(struct ath5k_hw *ah, const u8 *mask) ath_hw_setbssidmask(common); } -/************\ -* RX Control * -\************/ - -/** - * ath5k_hw_start_rx_pcu - Start RX engine - * - * @ah: The &struct ath5k_hw - * - * Starts RX engine on PCU so that hw can process RXed frames - * (ACK etc). - * - * NOTE: RX DMA should be already enabled using ath5k_hw_start_rx_dma - */ -void ath5k_hw_start_rx_pcu(struct ath5k_hw *ah) -{ - AR5K_REG_DISABLE_BITS(ah, AR5K_DIAG_SW, AR5K_DIAG_SW_DIS_RX); -} - -/** - * at5k_hw_stop_rx_pcu - Stop RX engine - * - * @ah: The &struct ath5k_hw - * - * Stops RX engine on PCU - * - * TODO: Detach ANI here - */ -void ath5k_hw_stop_rx_pcu(struct ath5k_hw *ah) -{ - AR5K_REG_ENABLE_BITS(ah, AR5K_DIAG_SW, AR5K_DIAG_SW_DIS_RX); -} - /* * Set multicast filter */ @@ -761,3 +687,161 @@ void ath5k_hw_set_coverage_class(struct ath5k_hw *ah, u8 coverage_class) ah->ah_coverage_class = coverage_class; } + +/***************************\ +* Init/Start/Stop functions * +\***************************/ + +/** + * ath5k_hw_start_rx_pcu - Start RX engine + * + * @ah: The &struct ath5k_hw + * + * Starts RX engine on PCU so that hw can process RXed frames + * (ACK etc). + * + * NOTE: RX DMA should be already enabled using ath5k_hw_start_rx_dma + */ +void ath5k_hw_start_rx_pcu(struct ath5k_hw *ah) +{ + AR5K_REG_DISABLE_BITS(ah, AR5K_DIAG_SW, AR5K_DIAG_SW_DIS_RX); +} + +/** + * at5k_hw_stop_rx_pcu - Stop RX engine + * + * @ah: The &struct ath5k_hw + * + * Stops RX engine on PCU + */ +void ath5k_hw_stop_rx_pcu(struct ath5k_hw *ah) +{ + AR5K_REG_ENABLE_BITS(ah, AR5K_DIAG_SW, AR5K_DIAG_SW_DIS_RX); +} + +/** + * ath5k_hw_set_opmode - Set PCU operating mode + * + * @ah: The &struct ath5k_hw + * @op_mode: &enum nl80211_iftype operating mode + * + * Configure PCU for the various operating modes (AP/STA etc) + */ +int ath5k_hw_set_opmode(struct ath5k_hw *ah, enum nl80211_iftype op_mode) +{ + struct ath_common *common = ath5k_hw_common(ah); + u32 pcu_reg, beacon_reg, low_id, high_id; + + ATH5K_DBG(ah->ah_sc, ATH5K_DEBUG_MODE, "mode %d\n", op_mode); + + /* Preserve rest settings */ + pcu_reg = ath5k_hw_reg_read(ah, AR5K_STA_ID1) & 0xffff0000; + pcu_reg &= ~(AR5K_STA_ID1_ADHOC | AR5K_STA_ID1_AP + | AR5K_STA_ID1_KEYSRCH_MODE + | (ah->ah_version == AR5K_AR5210 ? + (AR5K_STA_ID1_PWR_SV | AR5K_STA_ID1_NO_PSPOLL) : 0)); + + beacon_reg = 0; + + switch (op_mode) { + case NL80211_IFTYPE_ADHOC: + pcu_reg |= AR5K_STA_ID1_ADHOC | AR5K_STA_ID1_KEYSRCH_MODE; + beacon_reg |= AR5K_BCR_ADHOC; + if (ah->ah_version == AR5K_AR5210) + pcu_reg |= AR5K_STA_ID1_NO_PSPOLL; + else + AR5K_REG_ENABLE_BITS(ah, AR5K_CFG, AR5K_CFG_IBSS); + break; + + case NL80211_IFTYPE_AP: + case NL80211_IFTYPE_MESH_POINT: + pcu_reg |= AR5K_STA_ID1_AP | AR5K_STA_ID1_KEYSRCH_MODE; + beacon_reg |= AR5K_BCR_AP; + if (ah->ah_version == AR5K_AR5210) + pcu_reg |= AR5K_STA_ID1_NO_PSPOLL; + else + AR5K_REG_DISABLE_BITS(ah, AR5K_CFG, AR5K_CFG_IBSS); + break; + + case NL80211_IFTYPE_STATION: + pcu_reg |= AR5K_STA_ID1_KEYSRCH_MODE + | (ah->ah_version == AR5K_AR5210 ? + AR5K_STA_ID1_PWR_SV : 0); + case NL80211_IFTYPE_MONITOR: + pcu_reg |= AR5K_STA_ID1_KEYSRCH_MODE + | (ah->ah_version == AR5K_AR5210 ? + AR5K_STA_ID1_NO_PSPOLL : 0); + break; + + default: + return -EINVAL; + } + + /* + * Set PCU registers + */ + low_id = get_unaligned_le32(common->macaddr); + high_id = get_unaligned_le16(common->macaddr + 4); + ath5k_hw_reg_write(ah, low_id, AR5K_STA_ID0); + ath5k_hw_reg_write(ah, pcu_reg | high_id, AR5K_STA_ID1); + + /* + * Set Beacon Control Register on 5210 + */ + if (ah->ah_version == AR5K_AR5210) + ath5k_hw_reg_write(ah, beacon_reg, AR5K_BCR); + + return 0; +} + +void ath5k_hw_pcu_init(struct ath5k_hw *ah, enum nl80211_iftype op_mode, + u8 mode) +{ + /* Set bssid and bssid mask */ + ath5k_hw_set_bssid(ah); + + /* Set PCU config */ + ath5k_hw_set_opmode(ah, op_mode); + + /* Write rate duration table only on AR5212 and if + * virtual interface has already been brought up + * XXX: rethink this after new mode changes to + * mac80211 are integrated */ + if (ah->ah_version == AR5K_AR5212 && + ah->ah_sc->nvifs) + ath5k_hw_write_rate_duration(ah, mode); + + /* Set RSSI/BRSSI thresholds + * + * Note: If we decide to set this value + * dynamicaly, have in mind that when AR5K_RSSI_THR + * register is read it might return 0x40 if we haven't + * wrote anything to it plus BMISS RSSI threshold is zeroed. + * So doing a save/restore procedure here isn't the right + * choice. Instead store it on ath5k_hw */ + ath5k_hw_reg_write(ah, (AR5K_TUNE_RSSI_THRES | + AR5K_TUNE_BMISS_THRES << + AR5K_RSSI_THR_BMISS_S), + AR5K_RSSI_THR); + + /* MIC QoS support */ + if (ah->ah_mac_srev >= AR5K_SREV_AR2413) { + ath5k_hw_reg_write(ah, 0x000100aa, AR5K_MIC_QOS_CTL); + ath5k_hw_reg_write(ah, 0x00003210, AR5K_MIC_QOS_SEL); + } + + /* QoS NOACK Policy */ + if (ah->ah_version == AR5K_AR5212) { + ath5k_hw_reg_write(ah, + AR5K_REG_SM(2, AR5K_QOS_NOACK_2BIT_VALUES) | + AR5K_REG_SM(5, AR5K_QOS_NOACK_BIT_OFFSET) | + AR5K_REG_SM(0, AR5K_QOS_NOACK_BYTE_OFFSET), + AR5K_QOS_NOACK); + } + + /* Restore slot time and ACK timeouts */ + if (ah->ah_coverage_class > 0) + ath5k_hw_set_coverage_class(ah, ah->ah_coverage_class); + + return; +} diff --git a/drivers/net/wireless/ath/ath5k/phy.c b/drivers/net/wireless/ath/ath5k/phy.c index 6b43f535ff53..1c41fa837451 100644 --- a/drivers/net/wireless/ath/ath5k/phy.c +++ b/drivers/net/wireless/ath/ath5k/phy.c @@ -29,6 +29,95 @@ #include "rfbuffer.h" #include "rfgain.h" + +/******************\ +* Helper functions * +\******************/ + +/* + * Get the PHY Chip revision + */ +u16 ath5k_hw_radio_revision(struct ath5k_hw *ah, unsigned int chan) +{ + unsigned int i; + u32 srev; + u16 ret; + + /* + * Set the radio chip access register + */ + switch (chan) { + case CHANNEL_2GHZ: + ath5k_hw_reg_write(ah, AR5K_PHY_SHIFT_2GHZ, AR5K_PHY(0)); + break; + case CHANNEL_5GHZ: + ath5k_hw_reg_write(ah, AR5K_PHY_SHIFT_5GHZ, AR5K_PHY(0)); + break; + default: + return 0; + } + + mdelay(2); + + /* ...wait until PHY is ready and read the selected radio revision */ + ath5k_hw_reg_write(ah, 0x00001c16, AR5K_PHY(0x34)); + + for (i = 0; i < 8; i++) + ath5k_hw_reg_write(ah, 0x00010000, AR5K_PHY(0x20)); + + if (ah->ah_version == AR5K_AR5210) { + srev = ath5k_hw_reg_read(ah, AR5K_PHY(256) >> 28) & 0xf; + ret = (u16)ath5k_hw_bitswap(srev, 4) + 1; + } else { + srev = (ath5k_hw_reg_read(ah, AR5K_PHY(0x100)) >> 24) & 0xff; + ret = (u16)ath5k_hw_bitswap(((srev & 0xf0) >> 4) | + ((srev & 0x0f) << 4), 8); + } + + /* Reset to the 5GHz mode */ + ath5k_hw_reg_write(ah, AR5K_PHY_SHIFT_5GHZ, AR5K_PHY(0)); + + return ret; +} + +/* + * Check if a channel is supported + */ +bool ath5k_channel_ok(struct ath5k_hw *ah, u16 freq, unsigned int flags) +{ + /* Check if the channel is in our supported range */ + if (flags & CHANNEL_2GHZ) { + if ((freq >= ah->ah_capabilities.cap_range.range_2ghz_min) && + (freq <= ah->ah_capabilities.cap_range.range_2ghz_max)) + return true; + } else if (flags & CHANNEL_5GHZ) + if ((freq >= ah->ah_capabilities.cap_range.range_5ghz_min) && + (freq <= ah->ah_capabilities.cap_range.range_5ghz_max)) + return true; + + return false; +} + +bool ath5k_hw_chan_has_spur_noise(struct ath5k_hw *ah, + struct ieee80211_channel *channel) +{ + u8 refclk_freq; + + if ((ah->ah_radio == AR5K_RF5112) || + (ah->ah_radio == AR5K_RF5413) || + (ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4))) + refclk_freq = 40; + else + refclk_freq = 32; + + if ((channel->center_freq % refclk_freq != 0) && + ((channel->center_freq % refclk_freq < 10) || + (channel->center_freq % refclk_freq > 22))) + return true; + else + return false; +} + /* * Used to modify RF Banks before writing them to AR5K_RF_BUFFER */ @@ -110,6 +199,78 @@ static unsigned int ath5k_hw_rfb_op(struct ath5k_hw *ah, return data; } +/** + * ath5k_hw_write_ofdm_timings - set OFDM timings on AR5212 + * + * @ah: the &struct ath5k_hw + * @channel: the currently set channel upon reset + * + * Write the delta slope coefficient (used on pilot tracking ?) for OFDM + * operation on the AR5212 upon reset. This is a helper for ath5k_hw_phy_init. + * + * Since delta slope is floating point we split it on its exponent and + * mantissa and provide these values on hw. + * + * For more infos i think this patent is related + * http://www.freepatentsonline.com/7184495.html + */ +static inline int ath5k_hw_write_ofdm_timings(struct ath5k_hw *ah, + struct ieee80211_channel *channel) +{ + /* Get exponent and mantissa and set it */ + u32 coef_scaled, coef_exp, coef_man, + ds_coef_exp, ds_coef_man, clock; + + BUG_ON(!(ah->ah_version == AR5K_AR5212) || + !(channel->hw_value & CHANNEL_OFDM)); + + /* Get coefficient + * ALGO: coef = (5 * clock / carrier_freq) / 2 + * we scale coef by shifting clock value by 24 for + * better precision since we use integers */ + /* TODO: Half/quarter rate */ + clock = (channel->hw_value & CHANNEL_TURBO) ? 80 : 40; + coef_scaled = ((5 * (clock << 24)) / 2) / channel->center_freq; + + /* Get exponent + * ALGO: coef_exp = 14 - highest set bit position */ + coef_exp = ilog2(coef_scaled); + + /* Doesn't make sense if it's zero*/ + if (!coef_scaled || !coef_exp) + return -EINVAL; + + /* Note: we've shifted coef_scaled by 24 */ + coef_exp = 14 - (coef_exp - 24); + + + /* Get mantissa (significant digits) + * ALGO: coef_mant = floor(coef_scaled* 2^coef_exp+0.5) */ + coef_man = coef_scaled + + (1 << (24 - coef_exp - 1)); + + /* Calculate delta slope coefficient exponent + * and mantissa (remove scaling) and set them on hw */ + ds_coef_man = coef_man >> (24 - coef_exp); + ds_coef_exp = coef_exp - 16; + + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_TIMING_3, + AR5K_PHY_TIMING_3_DSC_MAN, ds_coef_man); + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_TIMING_3, + AR5K_PHY_TIMING_3_DSC_EXP, ds_coef_exp); + + return 0; +} + +int ath5k_hw_phy_disable(struct ath5k_hw *ah) +{ + /*Just a try M.F.*/ + ath5k_hw_reg_write(ah, AR5K_PHY_ACT_DISABLE, AR5K_PHY_ACT); + + return 0; +} + + /**********************\ * RF Gain optimization * \**********************/ @@ -436,7 +597,7 @@ done: /* Write initial RF gain table to set the RF sensitivity * this one works on all RF chips and has nothing to do * with gain_F calibration */ -int ath5k_hw_rfgain_init(struct ath5k_hw *ah, unsigned int freq) +static int ath5k_hw_rfgain_init(struct ath5k_hw *ah, unsigned int freq) { const struct ath5k_ini_rfgain *ath5k_rfg; unsigned int i, size; @@ -494,12 +655,11 @@ int ath5k_hw_rfgain_init(struct ath5k_hw *ah, unsigned int freq) * RF Registers setup * \********************/ - /* * Setup RF registers by writing RF buffer on hw */ -int ath5k_hw_rfregs_init(struct ath5k_hw *ah, struct ieee80211_channel *channel, - unsigned int mode) +static int ath5k_hw_rfregs_init(struct ath5k_hw *ah, + struct ieee80211_channel *channel, unsigned int mode) { const struct ath5k_rf_reg *rf_regs; const struct ath5k_ini_rfbuffer *ini_rfb; @@ -821,24 +981,6 @@ int ath5k_hw_rfregs_init(struct ath5k_hw *ah, struct ieee80211_channel *channel, PHY/RF channel functions \**************************/ -/* - * Check if a channel is supported - */ -bool ath5k_channel_ok(struct ath5k_hw *ah, u16 freq, unsigned int flags) -{ - /* Check if the channel is in our supported range */ - if (flags & CHANNEL_2GHZ) { - if ((freq >= ah->ah_capabilities.cap_range.range_2ghz_min) && - (freq <= ah->ah_capabilities.cap_range.range_2ghz_max)) - return true; - } else if (flags & CHANNEL_5GHZ) - if ((freq >= ah->ah_capabilities.cap_range.range_5ghz_min) && - (freq <= ah->ah_capabilities.cap_range.range_5ghz_max)) - return true; - - return false; -} - /* * Convertion needed for RF5110 */ @@ -1045,7 +1187,8 @@ static int ath5k_hw_rf2425_channel(struct ath5k_hw *ah, /* * Set a channel on the radio chip */ -int ath5k_hw_channel(struct ath5k_hw *ah, struct ieee80211_channel *channel) +static int ath5k_hw_channel(struct ath5k_hw *ah, + struct ieee80211_channel *channel) { int ret; /* @@ -1419,31 +1562,12 @@ int ath5k_hw_phy_calibrate(struct ath5k_hw *ah, return ret; } + /***************************\ * Spur mitigation functions * \***************************/ -bool ath5k_hw_chan_has_spur_noise(struct ath5k_hw *ah, - struct ieee80211_channel *channel) -{ - u8 refclk_freq; - - if ((ah->ah_radio == AR5K_RF5112) || - (ah->ah_radio == AR5K_RF5413) || - (ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4))) - refclk_freq = 40; - else - refclk_freq = 32; - - if ((channel->center_freq % refclk_freq != 0) && - ((channel->center_freq % refclk_freq < 10) || - (channel->center_freq % refclk_freq > 22))) - return true; - else - return false; -} - -void +static void ath5k_hw_set_spur_mitigation_filter(struct ath5k_hw *ah, struct ieee80211_channel *channel) { @@ -1666,63 +1790,6 @@ ath5k_hw_set_spur_mitigation_filter(struct ath5k_hw *ah, } } -/********************\ - Misc PHY functions -\********************/ - -int ath5k_hw_phy_disable(struct ath5k_hw *ah) -{ - /*Just a try M.F.*/ - ath5k_hw_reg_write(ah, AR5K_PHY_ACT_DISABLE, AR5K_PHY_ACT); - - return 0; -} - -/* - * Get the PHY Chip revision - */ -u16 ath5k_hw_radio_revision(struct ath5k_hw *ah, unsigned int chan) -{ - unsigned int i; - u32 srev; - u16 ret; - - /* - * Set the radio chip access register - */ - switch (chan) { - case CHANNEL_2GHZ: - ath5k_hw_reg_write(ah, AR5K_PHY_SHIFT_2GHZ, AR5K_PHY(0)); - break; - case CHANNEL_5GHZ: - ath5k_hw_reg_write(ah, AR5K_PHY_SHIFT_5GHZ, AR5K_PHY(0)); - break; - default: - return 0; - } - - mdelay(2); - - /* ...wait until PHY is ready and read the selected radio revision */ - ath5k_hw_reg_write(ah, 0x00001c16, AR5K_PHY(0x34)); - - for (i = 0; i < 8; i++) - ath5k_hw_reg_write(ah, 0x00010000, AR5K_PHY(0x20)); - - if (ah->ah_version == AR5K_AR5210) { - srev = ath5k_hw_reg_read(ah, AR5K_PHY(256) >> 28) & 0xf; - ret = (u16)ath5k_hw_bitswap(srev, 4) + 1; - } else { - srev = (ath5k_hw_reg_read(ah, AR5K_PHY(0x100)) >> 24) & 0xff; - ret = (u16)ath5k_hw_bitswap(((srev & 0xf0) >> 4) | - ((srev & 0x0f) << 4), 8); - } - - /* Reset to the 5GHz mode */ - ath5k_hw_reg_write(ah, AR5K_PHY_SHIFT_5GHZ, AR5K_PHY(0)); - - return ret; -} /*****************\ * Antenna control * @@ -2984,7 +3051,7 @@ ath5k_setup_rate_powertable(struct ath5k_hw *ah, u16 max_pwr, /* * Set transmission power */ -int +static int ath5k_hw_txpower(struct ath5k_hw *ah, struct ieee80211_channel *channel, u8 ee_mode, u8 txpower) { @@ -3108,3 +3175,176 @@ int ath5k_hw_set_txpower_limit(struct ath5k_hw *ah, u8 txpower) return ath5k_hw_txpower(ah, channel, ee_mode, txpower); } + +/*************\ + Init function +\*************/ + +int ath5k_hw_phy_init(struct ath5k_hw *ah, struct ieee80211_channel *channel, + u8 mode, u8 ee_mode, u8 freq) +{ + int ret, i; + u32 phy_tst1; + + ret = 0; + + /* + * 5211/5212 Specific + */ + if (ah->ah_version != AR5K_AR5210) { + + /* + * Write initial RF gain settings + * This should work for both 5111/5112 + */ + ret = ath5k_hw_rfgain_init(ah, freq); + if (ret) + return ret; + + mdelay(1); + + /* + * Set TX power + */ + ret = ath5k_hw_txpower(ah, channel, ee_mode, + ah->ah_txpower.txp_max_pwr / 2); + if (ret) + return ret; + + /* + * Write RF buffer + */ + ret = ath5k_hw_rfregs_init(ah, channel, mode); + if (ret) + return ret; + + + /* Write OFDM timings on 5212*/ + if (ah->ah_version == AR5K_AR5212 && + channel->hw_value & CHANNEL_OFDM) { + + ret = ath5k_hw_write_ofdm_timings(ah, channel); + if (ret) + return ret; + + /* Spur info is available only from EEPROM versions + * greater than 5.3, but the EEPROM routines will use + * static values for older versions */ + if (ah->ah_mac_srev >= AR5K_SREV_AR5424) + ath5k_hw_set_spur_mitigation_filter(ah, + channel); + } + + /*Enable/disable 802.11b mode on 5111 + (enable 2111 frequency converter + CCK)*/ + if (ah->ah_radio == AR5K_RF5111) { + if (mode == AR5K_MODE_11B) + AR5K_REG_ENABLE_BITS(ah, AR5K_TXCFG, + AR5K_TXCFG_B_MODE); + else + AR5K_REG_DISABLE_BITS(ah, AR5K_TXCFG, + AR5K_TXCFG_B_MODE); + } + + } else { + /* + * For 5210 we do all initialization using + * initvals, so we don't have to modify + * any settings (5210 also only supports + * a/aturbo modes) + */ + mdelay(1); + /* Disable phy and wait */ + ath5k_hw_reg_write(ah, AR5K_PHY_ACT_DISABLE, AR5K_PHY_ACT); + mdelay(1); + } + + /* Set channel on PHY */ + ret = ath5k_hw_channel(ah, channel); + if (ret) + return ret; + + /* + * Enable the PHY and wait until completion + * This includes BaseBand and Synthesizer + * activation. + */ + ath5k_hw_reg_write(ah, AR5K_PHY_ACT_ENABLE, AR5K_PHY_ACT); + + /* + * On 5211+ read activation -> rx delay + * and use it. + * + * TODO: Half/quarter rate support + */ + if (ah->ah_version != AR5K_AR5210) { + u32 delay; + delay = ath5k_hw_reg_read(ah, AR5K_PHY_RX_DELAY) & + AR5K_PHY_RX_DELAY_M; + delay = (channel->hw_value & CHANNEL_CCK) ? + ((delay << 2) / 22) : (delay / 10); + + udelay(100 + (2 * delay)); + } else { + mdelay(1); + } + + /* + * Perform ADC test to see if baseband is ready + * Set TX hold and check ADC test register + */ + phy_tst1 = ath5k_hw_reg_read(ah, AR5K_PHY_TST1); + ath5k_hw_reg_write(ah, AR5K_PHY_TST1_TXHOLD, AR5K_PHY_TST1); + for (i = 0; i <= 20; i++) { + if (!(ath5k_hw_reg_read(ah, AR5K_PHY_ADC_TEST) & 0x10)) + break; + udelay(200); + } + ath5k_hw_reg_write(ah, phy_tst1, AR5K_PHY_TST1); + + /* + * Start automatic gain control calibration + * + * During AGC calibration RX path is re-routed to + * a power detector so we don't receive anything. + * + * This method is used to calibrate some static offsets + * used together with on-the fly I/Q calibration (the + * one performed via ath5k_hw_phy_calibrate), which doesn't + * interrupt rx path. + * + * While rx path is re-routed to the power detector we also + * start a noise floor calibration to measure the + * card's noise floor (the noise we measure when we are not + * transmitting or receiving anything). + * + * If we are in a noisy environment, AGC calibration may time + * out and/or noise floor calibration might timeout. + */ + AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_AGCCTL, + AR5K_PHY_AGCCTL_CAL | AR5K_PHY_AGCCTL_NF); + + /* At the same time start I/Q calibration for QAM constellation + * -no need for CCK- */ + ah->ah_calibration = false; + if (!(mode == AR5K_MODE_11B)) { + ah->ah_calibration = true; + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_IQ, + AR5K_PHY_IQ_CAL_NUM_LOG_MAX, 15); + AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ, + AR5K_PHY_IQ_RUN); + } + + /* Wait for gain calibration to finish (we check for I/Q calibration + * during ath5k_phy_calibrate) */ + if (ath5k_hw_register_timeout(ah, AR5K_PHY_AGCCTL, + AR5K_PHY_AGCCTL_CAL, 0, false)) { + ATH5K_ERR(ah->ah_sc, "gain calibration timeout (%uMHz)\n", + channel->center_freq); + } + + /* Restore antenna mode */ + ath5k_hw_set_antenna_mode(ah, ah->ah_ant_mode); + + return ret; +} diff --git a/drivers/net/wireless/ath/ath5k/qcu.c b/drivers/net/wireless/ath/ath5k/qcu.c index 84c717ded1c5..52eee34fd54d 100644 --- a/drivers/net/wireless/ath/ath5k/qcu.c +++ b/drivers/net/wireless/ath/ath5k/qcu.c @@ -25,14 +25,52 @@ Queue Control Unit, DFS Control Unit Functions #include "debug.h" #include "base.h" + +/******************\ +* Helper functions * +\******************/ + /* - * Get properties for a transmit queue + * Get number of pending frames + * for a specific queue [5211+] */ -int ath5k_hw_get_tx_queueprops(struct ath5k_hw *ah, int queue, - struct ath5k_txq_info *queue_info) +u32 ath5k_hw_num_tx_pending(struct ath5k_hw *ah, unsigned int queue) { - memcpy(queue_info, &ah->ah_txq[queue], sizeof(struct ath5k_txq_info)); - return 0; + u32 pending; + AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num); + + /* Return if queue is declared inactive */ + if (ah->ah_txq[queue].tqi_type == AR5K_TX_QUEUE_INACTIVE) + return false; + + /* XXX: How about AR5K_CFG_TXCNT ? */ + if (ah->ah_version == AR5K_AR5210) + return false; + + pending = ath5k_hw_reg_read(ah, AR5K_QUEUE_STATUS(queue)); + pending &= AR5K_QCU_STS_FRMPENDCNT; + + /* It's possible to have no frames pending even if TXE + * is set. To indicate that q has not stopped return + * true */ + if (!pending && AR5K_REG_READ_Q(ah, AR5K_QCU_TXE, queue)) + return true; + + return pending; +} + +/* + * Set a transmit queue inactive + */ +void ath5k_hw_release_tx_queue(struct ath5k_hw *ah, unsigned int queue) +{ + if (WARN_ON(queue >= ah->ah_capabilities.cap_queues.q_tx_num)) + return; + + /* This queue will be skipped in further operations */ + ah->ah_txq[queue].tqi_type = AR5K_TX_QUEUE_INACTIVE; + /*For SIMR setup*/ + AR5K_Q_DISABLE_BITS(ah->ah_txq_status, queue); } /* @@ -49,6 +87,16 @@ static u16 ath5k_cw_validate(u16 cw_req) return cw; } +/* + * Get properties for a transmit queue + */ +int ath5k_hw_get_tx_queueprops(struct ath5k_hw *ah, int queue, + struct ath5k_txq_info *queue_info) +{ + memcpy(queue_info, &ah->ah_txq[queue], sizeof(struct ath5k_txq_info)); + return 0; +} + /* * Set properties for a transmit queue */ @@ -172,48 +220,10 @@ int ath5k_hw_setup_tx_queue(struct ath5k_hw *ah, enum ath5k_tx_queue queue_type, return queue; } -/* - * Get number of pending frames - * for a specific queue [5211+] - */ -u32 ath5k_hw_num_tx_pending(struct ath5k_hw *ah, unsigned int queue) -{ - u32 pending; - AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num); - - /* Return if queue is declared inactive */ - if (ah->ah_txq[queue].tqi_type == AR5K_TX_QUEUE_INACTIVE) - return false; - - /* XXX: How about AR5K_CFG_TXCNT ? */ - if (ah->ah_version == AR5K_AR5210) - return false; - - pending = ath5k_hw_reg_read(ah, AR5K_QUEUE_STATUS(queue)); - pending &= AR5K_QCU_STS_FRMPENDCNT; - - /* It's possible to have no frames pending even if TXE - * is set. To indicate that q has not stopped return - * true */ - if (!pending && AR5K_REG_READ_Q(ah, AR5K_QCU_TXE, queue)) - return true; - - return pending; -} - -/* - * Set a transmit queue inactive - */ -void ath5k_hw_release_tx_queue(struct ath5k_hw *ah, unsigned int queue) -{ - if (WARN_ON(queue >= ah->ah_capabilities.cap_queues.q_tx_num)) - return; - /* This queue will be skipped in further operations */ - ah->ah_txq[queue].tqi_type = AR5K_TX_QUEUE_INACTIVE; - /*For SIMR setup*/ - AR5K_Q_DISABLE_BITS(ah->ah_txq_status, queue); -} +/*******************************\ +* Single QCU/DCU initialization * +\*******************************/ /* * Set DFS properties for a transmit queue on DCU @@ -512,6 +522,11 @@ int ath5k_hw_reset_tx_queue(struct ath5k_hw *ah, unsigned int queue) return 0; } + +/**************************\ +* Global QCU/DCU functions * +\**************************/ + /* * Set slot time on DCU */ @@ -530,3 +545,26 @@ int ath5k_hw_set_slot_time(struct ath5k_hw *ah, unsigned int slot_time) return 0; } +int ath5k_hw_init_queues(struct ath5k_hw *ah) +{ + int i, ret; + + /* TODO: HW Compression support for data queues */ + /* TODO: Burst prefetch for data queues */ + + /* + * Reset queues and start beacon timers at the end of the reset routine + * This also sets QCU mask on each DCU for 1:1 qcu to dcu mapping + * Note: If we want we can assign multiple qcus on one dcu. + */ + for (i = 0; i < ah->ah_capabilities.cap_queues.q_tx_num; i++) { + ret = ath5k_hw_reset_tx_queue(ah, i); + if (ret) { + ATH5K_ERR(ah->ah_sc, + "failed to reset TX queue #%d\n", i); + return ret; + } + } + + return 0; +} diff --git a/drivers/net/wireless/ath/ath5k/reset.c b/drivers/net/wireless/ath/ath5k/reset.c index 5b179d01f97d..9dd5792780ba 100644 --- a/drivers/net/wireless/ath/ath5k/reset.c +++ b/drivers/net/wireless/ath/ath5k/reset.c @@ -32,6 +32,11 @@ #include "base.h" #include "debug.h" + +/******************\ +* Helper functions * +\******************/ + /* * Check if a register write has been completed */ @@ -53,146 +58,165 @@ int ath5k_hw_register_timeout(struct ath5k_hw *ah, u32 reg, u32 flag, u32 val, return (i <= 0) ? -EAGAIN : 0; } + +/*************************\ +* Clock related functions * +\*************************/ + /** - * ath5k_hw_write_ofdm_timings - set OFDM timings on AR5212 - * - * @ah: the &struct ath5k_hw - * @channel: the currently set channel upon reset + * ath5k_hw_htoclock - Translate usec to hw clock units * - * Write the delta slope coefficient (used on pilot tracking ?) for OFDM - * operation on the AR5212 upon reset. This is a helper for ath5k_hw_reset(). - * - * Since delta slope is floating point we split it on its exponent and - * mantissa and provide these values on hw. - * - * For more infos i think this patent is related - * http://www.freepatentsonline.com/7184495.html + * @ah: The &struct ath5k_hw + * @usec: value in microseconds */ -static inline int ath5k_hw_write_ofdm_timings(struct ath5k_hw *ah, - struct ieee80211_channel *channel) +unsigned int ath5k_hw_htoclock(struct ath5k_hw *ah, unsigned int usec) { - /* Get exponent and mantissa and set it */ - u32 coef_scaled, coef_exp, coef_man, - ds_coef_exp, ds_coef_man, clock; - - BUG_ON(!(ah->ah_version == AR5K_AR5212) || - !(channel->hw_value & CHANNEL_OFDM)); - - /* Get coefficient - * ALGO: coef = (5 * clock / carrier_freq) / 2 - * we scale coef by shifting clock value by 24 for - * better precision since we use integers */ - /* TODO: Half/quarter rate */ - clock = (channel->hw_value & CHANNEL_TURBO) ? 80 : 40; - coef_scaled = ((5 * (clock << 24)) / 2) / channel->center_freq; - - /* Get exponent - * ALGO: coef_exp = 14 - highest set bit position */ - coef_exp = ilog2(coef_scaled); - - /* Doesn't make sense if it's zero*/ - if (!coef_scaled || !coef_exp) - return -EINVAL; - - /* Note: we've shifted coef_scaled by 24 */ - coef_exp = 14 - (coef_exp - 24); + struct ath_common *common = ath5k_hw_common(ah); + return usec * common->clockrate; +} +/** + * ath5k_hw_clocktoh - Translate hw clock units to usec + * @clock: value in hw clock units + */ +unsigned int ath5k_hw_clocktoh(struct ath5k_hw *ah, unsigned int clock) +{ + struct ath_common *common = ath5k_hw_common(ah); + return clock / common->clockrate; +} - /* Get mantissa (significant digits) - * ALGO: coef_mant = floor(coef_scaled* 2^coef_exp+0.5) */ - coef_man = coef_scaled + - (1 << (24 - coef_exp - 1)); +/** + * ath5k_hw_set_clockrate - Set common->clockrate for the current channel + * + * @ah: The &struct ath5k_hw + */ +void ath5k_hw_set_clockrate(struct ath5k_hw *ah) +{ + struct ieee80211_channel *channel = ah->ah_current_channel; + struct ath_common *common = ath5k_hw_common(ah); + int clock; - /* Calculate delta slope coefficient exponent - * and mantissa (remove scaling) and set them on hw */ - ds_coef_man = coef_man >> (24 - coef_exp); - ds_coef_exp = coef_exp - 16; + if (channel->hw_value & CHANNEL_5GHZ) + clock = 40; /* 802.11a */ + else if (channel->hw_value & CHANNEL_CCK) + clock = 22; /* 802.11b */ + else + clock = 44; /* 802.11g */ - AR5K_REG_WRITE_BITS(ah, AR5K_PHY_TIMING_3, - AR5K_PHY_TIMING_3_DSC_MAN, ds_coef_man); - AR5K_REG_WRITE_BITS(ah, AR5K_PHY_TIMING_3, - AR5K_PHY_TIMING_3_DSC_EXP, ds_coef_exp); + /* Clock rate in turbo modes is twice the normal rate */ + if (channel->hw_value & CHANNEL_TURBO) + clock *= 2; - return 0; + common->clockrate = clock; } - /* - * index into rates for control rates, we can set it up like this because - * this is only used for AR5212 and we know it supports G mode - */ -static const unsigned int control_rates[] = - { 0, 1, 1, 1, 4, 4, 6, 6, 8, 8, 8, 8 }; - -/** - * ath5k_hw_write_rate_duration - fill rate code to duration table - * - * @ah: the &struct ath5k_hw - * @mode: one of enum ath5k_driver_mode - * - * Write the rate code to duration table upon hw reset. This is a helper for - * ath5k_hw_reset(). It seems all this is doing is setting an ACK timeout on - * the hardware, based on current mode, for each rate. The rates which are - * capable of short preamble (802.11b rates 2Mbps, 5.5Mbps, and 11Mbps) have - * different rate code so we write their value twice (one for long preample - * and one for short). + * If there is an external 32KHz crystal available, use it + * as ref. clock instead of 32/40MHz clock and baseband clocks + * to save power during sleep or restore normal 32/40MHz + * operation. * - * Note: Band doesn't matter here, if we set the values for OFDM it works - * on both a and g modes. So all we have to do is set values for all g rates - * that include all OFDM and CCK rates. If we operate in turbo or xr/half/ - * quarter rate mode, we need to use another set of bitrates (that's why we - * need the mode parameter) but we don't handle these proprietary modes yet. + * XXX: When operating on 32KHz certain PHY registers (27 - 31, + * 123 - 127) require delay on access. */ -static inline void ath5k_hw_write_rate_duration(struct ath5k_hw *ah, - unsigned int mode) +static void ath5k_hw_set_sleep_clock(struct ath5k_hw *ah, bool enable) { - struct ath5k_softc *sc = ah->ah_sc; - struct ieee80211_rate *rate; - unsigned int i; + struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; + u32 scal, spending, usec32; + + /* Only set 32KHz settings if we have an external + * 32KHz crystal present */ + if ((AR5K_EEPROM_HAS32KHZCRYSTAL(ee->ee_misc1) || + AR5K_EEPROM_HAS32KHZCRYSTAL_OLD(ee->ee_misc1)) && + enable) { + + /* 1 usec/cycle */ + AR5K_REG_WRITE_BITS(ah, AR5K_USEC_5211, AR5K_USEC_32, 1); + /* Set up tsf increment on each cycle */ + AR5K_REG_WRITE_BITS(ah, AR5K_TSF_PARM, AR5K_TSF_PARM_INC, 61); + + /* Set baseband sleep control registers + * and sleep control rate */ + ath5k_hw_reg_write(ah, 0x1f, AR5K_PHY_SCR); + + if ((ah->ah_radio == AR5K_RF5112) || + (ah->ah_radio == AR5K_RF5413) || + (ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4))) + spending = 0x14; + else + spending = 0x18; + ath5k_hw_reg_write(ah, spending, AR5K_PHY_SPENDING); + + if ((ah->ah_radio == AR5K_RF5112) || + (ah->ah_radio == AR5K_RF5413) || + (ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4))) { + ath5k_hw_reg_write(ah, 0x26, AR5K_PHY_SLMT); + ath5k_hw_reg_write(ah, 0x0d, AR5K_PHY_SCAL); + ath5k_hw_reg_write(ah, 0x07, AR5K_PHY_SCLOCK); + ath5k_hw_reg_write(ah, 0x3f, AR5K_PHY_SDELAY); + AR5K_REG_WRITE_BITS(ah, AR5K_PCICFG, + AR5K_PCICFG_SLEEP_CLOCK_RATE, 0x02); + } else { + ath5k_hw_reg_write(ah, 0x0a, AR5K_PHY_SLMT); + ath5k_hw_reg_write(ah, 0x0c, AR5K_PHY_SCAL); + ath5k_hw_reg_write(ah, 0x03, AR5K_PHY_SCLOCK); + ath5k_hw_reg_write(ah, 0x20, AR5K_PHY_SDELAY); + AR5K_REG_WRITE_BITS(ah, AR5K_PCICFG, + AR5K_PCICFG_SLEEP_CLOCK_RATE, 0x03); + } - /* Write rate duration table */ - for (i = 0; i < sc->sbands[IEEE80211_BAND_2GHZ].n_bitrates; i++) { - u32 reg; - u16 tx_time; + /* Enable sleep clock operation */ + AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, + AR5K_PCICFG_SLEEP_CLOCK_EN); - rate = &sc->sbands[IEEE80211_BAND_2GHZ].bitrates[control_rates[i]]; + } else { - /* Set ACK timeout */ - reg = AR5K_RATE_DUR(rate->hw_value); + /* Disable sleep clock operation and + * restore default parameters */ + AR5K_REG_DISABLE_BITS(ah, AR5K_PCICFG, + AR5K_PCICFG_SLEEP_CLOCK_EN); - /* An ACK frame consists of 10 bytes. If you add the FCS, - * which ieee80211_generic_frame_duration() adds, - * its 14 bytes. Note we use the control rate and not the - * actual rate for this rate. See mac80211 tx.c - * ieee80211_duration() for a brief description of - * what rate we should choose to TX ACKs. */ - tx_time = le16_to_cpu(ieee80211_generic_frame_duration(sc->hw, - NULL, 10, rate)); + AR5K_REG_WRITE_BITS(ah, AR5K_PCICFG, + AR5K_PCICFG_SLEEP_CLOCK_RATE, 0); - ath5k_hw_reg_write(ah, tx_time, reg); + ath5k_hw_reg_write(ah, 0x1f, AR5K_PHY_SCR); + ath5k_hw_reg_write(ah, AR5K_PHY_SLMT_32MHZ, AR5K_PHY_SLMT); - if (!(rate->flags & IEEE80211_RATE_SHORT_PREAMBLE)) - continue; + if (ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4)) + scal = AR5K_PHY_SCAL_32MHZ_2417; + else if (ee->ee_is_hb63) + scal = AR5K_PHY_SCAL_32MHZ_HB63; + else + scal = AR5K_PHY_SCAL_32MHZ; + ath5k_hw_reg_write(ah, scal, AR5K_PHY_SCAL); - /* - * We're not distinguishing short preamble here, - * This is true, all we'll get is a longer value here - * which is not necessarilly bad. We could use - * export ieee80211_frame_duration() but that needs to be - * fixed first to be properly used by mac802111 drivers: - * - * - remove erp stuff and let the routine figure ofdm - * erp rates - * - remove passing argument ieee80211_local as - * drivers don't have access to it - * - move drivers using ieee80211_generic_frame_duration() - * to this - */ - ath5k_hw_reg_write(ah, tx_time, - reg + (AR5K_SET_SHORT_PREAMBLE << 2)); + ath5k_hw_reg_write(ah, AR5K_PHY_SCLOCK_32MHZ, AR5K_PHY_SCLOCK); + ath5k_hw_reg_write(ah, AR5K_PHY_SDELAY_32MHZ, AR5K_PHY_SDELAY); + + if ((ah->ah_radio == AR5K_RF5112) || + (ah->ah_radio == AR5K_RF5413) || + (ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4))) + spending = 0x14; + else + spending = 0x18; + ath5k_hw_reg_write(ah, spending, AR5K_PHY_SPENDING); + + if ((ah->ah_radio == AR5K_RF5112) || + (ah->ah_radio == AR5K_RF5413)) + usec32 = 39; + else + usec32 = 31; + AR5K_REG_WRITE_BITS(ah, AR5K_USEC_5211, AR5K_USEC_32, usec32); + + AR5K_REG_WRITE_BITS(ah, AR5K_TSF_PARM, AR5K_TSF_PARM_INC, 1); } } + +/*********************\ +* Reset/Sleep control * +\*********************/ + /* * Reset chipset */ @@ -522,107 +546,10 @@ int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, int flags, bool initial) return 0; } -/* - * If there is an external 32KHz crystal available, use it - * as ref. clock instead of 32/40MHz clock and baseband clocks - * to save power during sleep or restore normal 32/40MHz - * operation. - * - * XXX: When operating on 32KHz certain PHY registers (27 - 31, - * 123 - 127) require delay on access. - */ -static void ath5k_hw_set_sleep_clock(struct ath5k_hw *ah, bool enable) -{ - struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; - u32 scal, spending, usec32; - - /* Only set 32KHz settings if we have an external - * 32KHz crystal present */ - if ((AR5K_EEPROM_HAS32KHZCRYSTAL(ee->ee_misc1) || - AR5K_EEPROM_HAS32KHZCRYSTAL_OLD(ee->ee_misc1)) && - enable) { - - /* 1 usec/cycle */ - AR5K_REG_WRITE_BITS(ah, AR5K_USEC_5211, AR5K_USEC_32, 1); - /* Set up tsf increment on each cycle */ - AR5K_REG_WRITE_BITS(ah, AR5K_TSF_PARM, AR5K_TSF_PARM_INC, 61); - - /* Set baseband sleep control registers - * and sleep control rate */ - ath5k_hw_reg_write(ah, 0x1f, AR5K_PHY_SCR); - - if ((ah->ah_radio == AR5K_RF5112) || - (ah->ah_radio == AR5K_RF5413) || - (ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4))) - spending = 0x14; - else - spending = 0x18; - ath5k_hw_reg_write(ah, spending, AR5K_PHY_SPENDING); - - if ((ah->ah_radio == AR5K_RF5112) || - (ah->ah_radio == AR5K_RF5413) || - (ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4))) { - ath5k_hw_reg_write(ah, 0x26, AR5K_PHY_SLMT); - ath5k_hw_reg_write(ah, 0x0d, AR5K_PHY_SCAL); - ath5k_hw_reg_write(ah, 0x07, AR5K_PHY_SCLOCK); - ath5k_hw_reg_write(ah, 0x3f, AR5K_PHY_SDELAY); - AR5K_REG_WRITE_BITS(ah, AR5K_PCICFG, - AR5K_PCICFG_SLEEP_CLOCK_RATE, 0x02); - } else { - ath5k_hw_reg_write(ah, 0x0a, AR5K_PHY_SLMT); - ath5k_hw_reg_write(ah, 0x0c, AR5K_PHY_SCAL); - ath5k_hw_reg_write(ah, 0x03, AR5K_PHY_SCLOCK); - ath5k_hw_reg_write(ah, 0x20, AR5K_PHY_SDELAY); - AR5K_REG_WRITE_BITS(ah, AR5K_PCICFG, - AR5K_PCICFG_SLEEP_CLOCK_RATE, 0x03); - } - /* Enable sleep clock operation */ - AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, - AR5K_PCICFG_SLEEP_CLOCK_EN); - - } else { - - /* Disable sleep clock operation and - * restore default parameters */ - AR5K_REG_DISABLE_BITS(ah, AR5K_PCICFG, - AR5K_PCICFG_SLEEP_CLOCK_EN); - - AR5K_REG_WRITE_BITS(ah, AR5K_PCICFG, - AR5K_PCICFG_SLEEP_CLOCK_RATE, 0); - - ath5k_hw_reg_write(ah, 0x1f, AR5K_PHY_SCR); - ath5k_hw_reg_write(ah, AR5K_PHY_SLMT_32MHZ, AR5K_PHY_SLMT); - - if (ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4)) - scal = AR5K_PHY_SCAL_32MHZ_2417; - else if (ee->ee_is_hb63) - scal = AR5K_PHY_SCAL_32MHZ_HB63; - else - scal = AR5K_PHY_SCAL_32MHZ; - ath5k_hw_reg_write(ah, scal, AR5K_PHY_SCAL); - - ath5k_hw_reg_write(ah, AR5K_PHY_SCLOCK_32MHZ, AR5K_PHY_SCLOCK); - ath5k_hw_reg_write(ah, AR5K_PHY_SDELAY_32MHZ, AR5K_PHY_SDELAY); - - if ((ah->ah_radio == AR5K_RF5112) || - (ah->ah_radio == AR5K_RF5413) || - (ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4))) - spending = 0x14; - else - spending = 0x18; - ath5k_hw_reg_write(ah, spending, AR5K_PHY_SPENDING); - - if ((ah->ah_radio == AR5K_RF5112) || - (ah->ah_radio == AR5K_RF5413)) - usec32 = 39; - else - usec32 = 31; - AR5K_REG_WRITE_BITS(ah, AR5K_USEC_5211, AR5K_USEC_32, usec32); - - AR5K_REG_WRITE_BITS(ah, AR5K_TSF_PARM, AR5K_TSF_PARM_INC, 1); - } -} +/**************************************\ +* Post-initvals register modifications * +\**************************************/ /* TODO: Half/Quarter rate */ static void ath5k_hw_tweak_initval_settings(struct ath5k_hw *ah, @@ -705,7 +632,8 @@ static void ath5k_hw_tweak_initval_settings(struct ath5k_hw *ah, ath5k_hw_reg_write(ah, data, AR5K_PHY_FRAME_CTL); } - if (ah->ah_mac_srev < AR5K_SREV_AR5211) { + if ((ah->ah_radio == AR5K_RF5112) && + (ah->ah_mac_srev < AR5K_SREV_AR5211)) { u32 usec_reg; /* 5311 has different tx/rx latency masks * from 5211, since we deal 5311 the same @@ -734,6 +662,10 @@ static void ath5k_hw_commit_eeprom_settings(struct ath5k_hw *ah, struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; s16 cck_ofdm_pwr_delta; + /* TODO: Add support for AR5210 EEPROM */ + if (ah->ah_version == AR5K_AR5210) + return; + /* Adjust power delta for channel 14 */ if (channel->center_freq == 2484) cck_ofdm_pwr_delta = @@ -870,15 +802,16 @@ static void ath5k_hw_commit_eeprom_settings(struct ath5k_hw *ah, ath5k_hw_reg_write(ah, 0, AR5K_PHY_HEAVY_CLIP_ENABLE); } -/* - * Main reset function - */ + +/*********************\ +* Main reset function * +\*********************/ + int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode, struct ieee80211_channel *channel, bool change_channel) { struct ath_common *common = ath5k_hw_common(ah); u32 s_seq[10], s_led[3], staid1_flags, tsf_up, tsf_lo; - u32 phy_tst1; u8 mode, freq, ee_mode; int i, ret; @@ -1026,93 +959,15 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode, return ret; /* - * 5211/5212 Specific + * Tweak initval settings for revised + * chipsets and add some more config + * bits */ - if (ah->ah_version != AR5K_AR5210) { - - /* - * Write initial RF gain settings - * This should work for both 5111/5112 - */ - ret = ath5k_hw_rfgain_init(ah, freq); - if (ret) - return ret; - - mdelay(1); - - /* - * Tweak initval settings for revised - * chipsets and add some more config - * bits - */ - ath5k_hw_tweak_initval_settings(ah, channel); - - /* - * Set TX power - */ - ret = ath5k_hw_txpower(ah, channel, ee_mode, - ah->ah_txpower.txp_max_pwr / 2); - if (ret) - return ret; - - /* Write rate duration table only on AR5212 and if - * virtual interface has already been brought up - * XXX: rethink this after new mode changes to - * mac80211 are integrated */ - if (ah->ah_version == AR5K_AR5212 && - ah->ah_sc->nvifs) - ath5k_hw_write_rate_duration(ah, mode); - - /* - * Write RF buffer - */ - ret = ath5k_hw_rfregs_init(ah, channel, mode); - if (ret) - return ret; - - - /* Write OFDM timings on 5212*/ - if (ah->ah_version == AR5K_AR5212 && - channel->hw_value & CHANNEL_OFDM) { + ath5k_hw_tweak_initval_settings(ah, channel); - ret = ath5k_hw_write_ofdm_timings(ah, channel); - if (ret) - return ret; + /* Commit values from EEPROM */ + ath5k_hw_commit_eeprom_settings(ah, channel, ee_mode); - /* Spur info is available only from EEPROM versions - * greater than 5.3, but the EEPROM routines will use - * static values for older versions */ - if (ah->ah_mac_srev >= AR5K_SREV_AR5424) - ath5k_hw_set_spur_mitigation_filter(ah, - channel); - } - - /*Enable/disable 802.11b mode on 5111 - (enable 2111 frequency converter + CCK)*/ - if (ah->ah_radio == AR5K_RF5111) { - if (mode == AR5K_MODE_11B) - AR5K_REG_ENABLE_BITS(ah, AR5K_TXCFG, - AR5K_TXCFG_B_MODE); - else - AR5K_REG_DISABLE_BITS(ah, AR5K_TXCFG, - AR5K_TXCFG_B_MODE); - } - - /* Commit values from EEPROM */ - ath5k_hw_commit_eeprom_settings(ah, channel, ee_mode); - - } else { - /* - * For 5210 we do all initialization using - * initvals, so we don't have to modify - * any settings (5210 also only supports - * a/aturbo modes) - */ - mdelay(1); - /* Disable phy and wait */ - ath5k_hw_reg_write(ah, AR5K_PHY_ACT_DISABLE, AR5K_PHY_ACT); - mdelay(1); - } /* * Restore saved values @@ -1156,193 +1011,38 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode, /* - * Configure PCU + * Initialize PCU */ - - /* Restore bssid and bssid mask */ - ath5k_hw_set_bssid(ah); - - /* Set PCU config */ - ath5k_hw_set_opmode(ah, op_mode); + ath5k_hw_pcu_init(ah, op_mode, mode); /* Clear any pending interrupts * PISR/SISR Not available on 5210 */ if (ah->ah_version != AR5K_AR5210) ath5k_hw_reg_write(ah, 0xffffffff, AR5K_PISR); - /* Set RSSI/BRSSI thresholds - * - * Note: If we decide to set this value - * dynamically, keep in mind that when AR5K_RSSI_THR - * register is read, it might return 0x40 if we haven't - * written anything to it. Also, BMISS RSSI threshold is zeroed. - * So doing a save/restore procedure here isn't the right - * choice. Instead, store it in ath5k_hw */ - ath5k_hw_reg_write(ah, (AR5K_TUNE_RSSI_THRES | - AR5K_TUNE_BMISS_THRES << - AR5K_RSSI_THR_BMISS_S), - AR5K_RSSI_THR); - - /* MIC QoS support */ - if (ah->ah_mac_srev >= AR5K_SREV_AR2413) { - ath5k_hw_reg_write(ah, 0x000100aa, AR5K_MIC_QOS_CTL); - ath5k_hw_reg_write(ah, 0x00003210, AR5K_MIC_QOS_SEL); - } - - /* QoS NOACK Policy */ - if (ah->ah_version == AR5K_AR5212) { - ath5k_hw_reg_write(ah, - AR5K_REG_SM(2, AR5K_QOS_NOACK_2BIT_VALUES) | - AR5K_REG_SM(5, AR5K_QOS_NOACK_BIT_OFFSET) | - AR5K_REG_SM(0, AR5K_QOS_NOACK_BYTE_OFFSET), - AR5K_QOS_NOACK); - } - - /* - * Configure PHY + * Initialize PHY */ - - /* Set channel on PHY */ - ret = ath5k_hw_channel(ah, channel); - if (ret) + ret = ath5k_hw_phy_init(ah, channel, mode, ee_mode, freq); + if (ret) { + ATH5K_ERR(ah->ah_sc, + "failed to initialize PHY (%i) !\n", ret); return ret; - - /* - * Enable the PHY and wait until completion - * This includes BaseBand and Synthesizer - * activation. - */ - ath5k_hw_reg_write(ah, AR5K_PHY_ACT_ENABLE, AR5K_PHY_ACT); - - /* - * On 5211+ read activation -> rx delay - * and use it. - * - * TODO: Half/quarter rate support - */ - if (ah->ah_version != AR5K_AR5210) { - u32 delay; - delay = ath5k_hw_reg_read(ah, AR5K_PHY_RX_DELAY) & - AR5K_PHY_RX_DELAY_M; - delay = (channel->hw_value & CHANNEL_CCK) ? - ((delay << 2) / 22) : (delay / 10); - - udelay(100 + (2 * delay)); - } else { - mdelay(1); - } - - /* - * Perform ADC test to see if baseband is ready - * Set TX hold and check ADC test register - */ - phy_tst1 = ath5k_hw_reg_read(ah, AR5K_PHY_TST1); - ath5k_hw_reg_write(ah, AR5K_PHY_TST1_TXHOLD, AR5K_PHY_TST1); - for (i = 0; i <= 20; i++) { - if (!(ath5k_hw_reg_read(ah, AR5K_PHY_ADC_TEST) & 0x10)) - break; - udelay(200); - } - ath5k_hw_reg_write(ah, phy_tst1, AR5K_PHY_TST1); - - /* - * Start automatic gain control calibration - * - * During AGC calibration RX path is re-routed to - * a power detector so we don't receive anything. - * - * This method is used to calibrate some static offsets - * used together with on-the fly I/Q calibration (the - * one performed via ath5k_hw_phy_calibrate), which doesn't - * interrupt rx path. - * - * While rx path is re-routed to the power detector we also - * start a noise floor calibration to measure the - * card's noise floor (the noise we measure when we are not - * transmitting or receiving anything). - * - * If we are in a noisy environment, AGC calibration may time - * out and/or noise floor calibration might timeout. - */ - AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_AGCCTL, - AR5K_PHY_AGCCTL_CAL | AR5K_PHY_AGCCTL_NF); - - /* At the same time start I/Q calibration for QAM constellation - * -no need for CCK- */ - ah->ah_calibration = false; - if (!(mode == AR5K_MODE_11B)) { - ah->ah_calibration = true; - AR5K_REG_WRITE_BITS(ah, AR5K_PHY_IQ, - AR5K_PHY_IQ_CAL_NUM_LOG_MAX, 15); - AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ, - AR5K_PHY_IQ_RUN); - } - - /* Wait for gain calibration to finish (we check for I/Q calibration - * during ath5k_phy_calibrate) */ - if (ath5k_hw_register_timeout(ah, AR5K_PHY_AGCCTL, - AR5K_PHY_AGCCTL_CAL, 0, false)) { - ATH5K_ERR(ah->ah_sc, "gain calibration timeout (%uMHz)\n", - channel->center_freq); } - /* Restore antenna mode */ - ath5k_hw_set_antenna_mode(ah, ah->ah_ant_mode); - - /* Restore slot time and ACK timeouts */ - if (ah->ah_coverage_class > 0) - ath5k_hw_set_coverage_class(ah, ah->ah_coverage_class); - /* * Configure QCUs/DCUs */ + ret = ath5k_hw_init_queues(ah); + if (ret) + return ret; - /* TODO: HW Compression support for data queues */ - /* TODO: Burst prefetch for data queues */ - - /* - * Reset queues and start beacon timers at the end of the reset routine - * This also sets QCU mask on each DCU for 1:1 qcu to dcu mapping - * Note: If we want we can assign multiple qcus on one dcu. - */ - for (i = 0; i < ah->ah_capabilities.cap_queues.q_tx_num; i++) { - ret = ath5k_hw_reset_tx_queue(ah, i); - if (ret) { - ATH5K_ERR(ah->ah_sc, - "failed to reset TX queue #%d\n", i); - return ret; - } - } - - - /* - * Configure DMA/Interrupts - */ /* - * Set Rx/Tx DMA Configuration - * - * Set standard DMA size (128). Note that - * a DMA size of 512 causes rx overruns and tx errors - * on pci-e cards (tested on 5424 but since rx overruns - * also occur on 5416/5418 with madwifi we set 128 - * for all PCI-E cards to be safe). - * - * XXX: need to check 5210 for this - * TODO: Check out tx triger level, it's always 64 on dumps but I - * guess we can tweak it and see how it goes ;-) + * Initialize DMA/Interrupts */ - if (ah->ah_version != AR5K_AR5210) { - AR5K_REG_WRITE_BITS(ah, AR5K_TXCFG, - AR5K_TXCFG_SDMAMR, AR5K_DMASIZE_128B); - AR5K_REG_WRITE_BITS(ah, AR5K_RXCFG, - AR5K_RXCFG_SDMAMW, AR5K_DMASIZE_128B); - } + ath5k_hw_dma_init(ah); - /* Pre-enable interrupts on 5211/5212*/ - if (ah->ah_version != AR5K_AR5210) - ath5k_hw_set_imr(ah, ah->ah_imr); /* Enable 32KHz clock function for AR5212+ chips * Set clocks to 32KHz operation and use an -- 2.34.1