From 93f5de5c58a863b48a8c44d70c4f7e3d0c7af50e Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Fri, 8 Jun 2012 08:25:41 +0800 Subject: [PATCH] regulator: max1586: Convert max1586_v3_ops to regulator_list_voltage_linear Signed-off-by: Axel Lin Signed-off-by: Mark Brown --- drivers/regulator/max1586.c | 32 +++++++++++--------------------- 1 file changed, 11 insertions(+), 21 deletions(-) diff --git a/drivers/regulator/max1586.c b/drivers/regulator/max1586.c index 126c7d8f31c6..a54771e4d960 100644 --- a/drivers/regulator/max1586.c +++ b/drivers/regulator/max1586.c @@ -63,14 +63,6 @@ static int v6_voltages_uv[] = { 1, 1800000, 2500000, 3000000 }; * R24 and R25=100kOhm as described in the data sheet. * The gain is approximately: 1 + R24/R25 + R24/185.5kOhm */ -static int max1586_v3_calc_voltage(struct max1586_data *max1586, - unsigned selector) -{ - unsigned range_uV = max1586->max_uV - max1586->min_uV; - - return max1586->min_uV + (selector * range_uV / MAX1586_V3_MAX_VSEL); -} - static int max1586_v3_set(struct regulator_dev *rdev, int min_uV, int max_uV, unsigned *selector) { @@ -86,25 +78,16 @@ static int max1586_v3_set(struct regulator_dev *rdev, int min_uV, int max_uV, *selector = DIV_ROUND_UP((min_uV - max1586->min_uV) * MAX1586_V3_MAX_VSEL, range_uV); - if (max1586_v3_calc_voltage(max1586, *selector) > max_uV) + if (regulator_list_voltage_linear(rdev, *selector) > max_uV) return -EINVAL; dev_dbg(&client->dev, "changing voltage v3 to %dmv\n", - max1586_v3_calc_voltage(max1586, *selector) / 1000); + regulator_list_voltage_linear(rdev, *selector) / 1000); v3_prog = I2C_V3_SELECT | (u8) *selector; return i2c_smbus_write_byte(client, v3_prog); } -static int max1586_v3_list(struct regulator_dev *rdev, unsigned selector) -{ - struct max1586_data *max1586 = rdev_get_drvdata(rdev); - - if (selector > MAX1586_V3_MAX_VSEL) - return -EINVAL; - return max1586_v3_calc_voltage(max1586, selector); -} - static int max1586_v6_set_voltage_sel(struct regulator_dev *rdev, unsigned int selector) { @@ -124,7 +107,7 @@ static int max1586_v6_set_voltage_sel(struct regulator_dev *rdev, */ static struct regulator_ops max1586_v3_ops = { .set_voltage = max1586_v3_set, - .list_voltage = max1586_v3_list, + .list_voltage = regulator_list_voltage_linear, }; static struct regulator_ops max1586_v6_ops = { @@ -132,7 +115,7 @@ static struct regulator_ops max1586_v6_ops = { .list_voltage = regulator_list_voltage_table, }; -static const struct regulator_desc max1586_reg[] = { +static struct regulator_desc max1586_reg[] = { { .name = "Output_V3", .id = MAX1586_V3, @@ -185,6 +168,13 @@ static int __devinit max1586_pmic_probe(struct i2c_client *client, goto err; } + if (id == MAX1586_V3) { + max1586_reg[id].min_uV = max1586->min_uV; + max1586_reg[id].uV_step = + (max1586->max_uV - max1586->min_uV) / + MAX1586_V3_MAX_VSEL; + } + config.dev = &client->dev; config.init_data = pdata->subdevs[i].platform_data; config.driver_data = max1586; -- 2.34.1