From 94e74333d081115490f7fe6f265cfdc4dffbbf4f Mon Sep 17 00:00:00 2001 From: Jade Bilkey Date: Mon, 17 Mar 2014 19:45:26 -0400 Subject: [PATCH] staging: bcm: Cleanup switch statement Fixes checkpatch.pl warnings and errors: ERROR: switch and case should be at the same indent + switch (status) { [...] + case STATUS_SUCCESS: [...] + case -ENOENT : [...] + case -EINPROGRESS: [...] + case -EPIPE: [...] + case -ECONNRESET: //URB got unlinked. + case -ESHUTDOWN: // hardware gone. this is the serious problem. [...] + case -ENODEV : //Device got removed + case -EINVAL : //Some thing very bad happened with the URB. No description is available. [...] + default: ERROR: that open brace { should be on the previous line + if ( urb->actual_length ) + { ERROR: space prohibited after that open parenthesis '(' + if ( urb->actual_length ) ERROR: space prohibited before that close parenthesis ')' + if ( urb->actual_length ) ERROR: that open brace { should be on the previous line + if(psIntfAdapter->ulInterruptData[1] & 0xFF) + { ERROR: space required before the open parenthesis '(' + if(psIntfAdapter->ulInterruptData[1] & 0xFF) WARNING: line over 80 characters + BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, INTF_INIT, DBG_LVL_ALL, "Got USIM interrupt"); ERROR: space required after that ',' (ctx:VxV) + BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, INTF_INIT, DBG_LVL_ALL, "Got USIM interrupt"); ^ ERROR: that open brace { should be on the previous line + if(psIntfAdapter->ulInterruptData[1] & 0xFF00) + { ERROR: space required before the open parenthesis '(' + if(psIntfAdapter->ulInterruptData[1] & 0xFF00) WARNING: line over 80 characters + (psIntfAdapter->ulInterruptData[1] & 0xFF00) >> 8); WARNING: space prohibited between function name and open parenthesis '(' + atomic_set (&Adapter->uiMBupdate, TRUE); WARNING: line over 80 characters + BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, INTF_INIT, DBG_LVL_ALL, "TX mailbox contains %d", ERROR: space required after that ',' (ctx:VxV) + BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, INTF_INIT, DBG_LVL_ALL, "TX mailbox contains %d", ^ + atomic_read(&Adapter->CurrNumFreeTxDesc)); ERROR: that open brace { should be on the previous line + if(psIntfAdapter->ulInterruptData[1] >> 16) + { ERROR: space required before the open parenthesis '(' + if(psIntfAdapter->ulInterruptData[1] >> 16) ERROR: spaces required around that '=' (ctx:VxE) + Adapter->CurrNumRecvDescs= ^ WARNING: line over 80 characters + (psIntfAdapter->ulInterruptData[1] >> 16); + BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, INTF_INIT, DBG_LVL_ALL,"RX mailbox contains %d", ERROR: space required after that ',' (ctx:VxV) + BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, INTF_INIT, DBG_LVL_ALL,"RX mailbox contains %d", ^ ERROR: space required after that ',' (ctx:VxV) + BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, INTF_INIT, DBG_LVL_ALL,"RX mailbox contains %d", ^ ERROR: that open brace { should be on the previous line + if(Adapter->fw_download_done && + !Adapter->downloadDDR && + atomic_read(&Adapter->CurrNumFreeTxDesc)) + { ERROR: space required before the open parenthesis '(' + if(Adapter->fw_download_done && ERROR: spaces required around that '+=' (ctx:WxV) + psIntfAdapter->psAdapter->downloadDDR +=1; ^ ERROR: that open brace { should be on the previous line + if(false == Adapter->waiting_to_fw_download_done) + { ERROR: space required before the open parenthesis '(' + if(false == Adapter->waiting_to_fw_download_done) ERROR: that open brace { should be on the previous line + if(!atomic_read(&Adapter->TxPktAvail)) + { ERROR: space required before the open parenthesis '(' + if(!atomic_read(&Adapter->TxPktAvail)) WARNING: line over 80 characters + BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, INTF_INIT, DBG_LVL_ALL,"Firing interrupt in URB"); ERROR: space required after that ',' (ctx:VxV) + BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, INTF_INIT, DBG_LVL_ALL,"Firing interrupt in URB"); ^ ERROR: space required after that ',' (ctx:VxV) + BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, INTF_INIT, DBG_LVL_ALL,"Firing interrupt in URB"); ^ ERROR: space prohibited before that ':' (ctx:WxE) + case -ENOENT : ^ WARNING: line over 80 characters + BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, INTF_INIT, DBG_LVL_ALL,"URB has got disconnected ...."); ERROR: space required after that ',' (ctx:VxV) + BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, INTF_INIT, DBG_LVL_ALL,"URB has got disconnected ...."); ^ ERROR: space required after that ',' (ctx:VxV) + BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, INTF_INIT, DBG_LVL_ALL,"URB has got disconnected ...."); ^ WARNING: space prohibited before semicolon + return ; WARNING: line over 80 characters + //This situation may happened when URBunlink is used. for detail check usb_unlink_urb documentation. ERROR: do not use C99 // comments + //This situation may happened when URBunlink is used. for detail check usb_unlink_urb documentation. WARNING: line over 80 characters + BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, INTF_INIT, DBG_LVL_ALL,"Impossibe condition has occurred... something very bad is going on"); ERROR: space required after that ',' (ctx:VxV) + BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, INTF_INIT, DBG_LVL_ALL,"Impossibe condition has occurred... something very bad is going on"); ^ ERROR: space required after that ',' (ctx:VxV) + BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, INTF_INIT, DBG_LVL_ALL,"Impossibe condition has occurred... something very bad is going on"); ^ WARNING: space prohibited before semicolon + break ; ERROR: do not use C99 // comments + //return; WARNING: line over 80 characters + BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, INTF_INIT, DBG_LVL_ALL,"Interrupt IN endPoint has got halted/stalled...need to clear this"); ERROR: space required after that ',' (ctx:VxV) + BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, INTF_INIT, DBG_LVL_ALL,"Interrupt IN endPoint has got halted/stalled...need to clear this"); ^ ERROR: space required after that ',' (ctx:VxV) + BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, INTF_INIT, DBG_LVL_ALL,"Interrupt IN endPoint has got halted/stalled...need to clear this"); ^ WARNING: space prohibited before semicolon + Adapter->bEndPointHalted = TRUE ; WARNING: space prohibited before semicolon + urb->status = STATUS_SUCCESS ; ERROR: do not use C99 // comments + case -ECONNRESET: //URB got unlinked. WARNING: line over 80 characters + case -ESHUTDOWN: // hardware gone. this is the serious problem. ERROR: do not use C99 // comments + case -ESHUTDOWN: // hardware gone. this is the serious problem. WARNING: line over 80 characters + //Occurs only when something happens with the host controller device ERROR: code indent should use tabs where possible +^I ^I^I^I^I^I^I//Occurs only when something happens with the host controller device$ WARNING: please, no space before tabs +^I ^I^I^I^I^I^I//Occurs only when something happens with the host controller device$ ERROR: do not use C99 // comments + //Occurs only when something happens with the host controller device ERROR: do not use C99 // comments + case -ENODEV : //Device got removed ERROR: space prohibited before that ':' (ctx:WxW) + case -ENODEV : //Device got removed ^ WARNING: line over 80 characters + case -EINVAL : //Some thing very bad happened with the URB. No description is available. ERROR: do not use C99 // comments + case -EINVAL : //Some thing very bad happened with the URB. No description is available. ERROR: space prohibited before that ':' (ctx:WxW) + case -EINVAL : //Some thing very bad happened with the URB. No description is available. ^ WARNING: line over 80 characters + BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, INTF_INIT, DBG_LVL_ALL,"interrupt urb error %d", status); ERROR: code indent should use tabs where possible +^I ^IBCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, INTF_INIT, DBG_LVL_ALL,"interrupt urb error %d", status);$ WARNING: please, no space before tabs +^I ^IBCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, INTF_INIT, DBG_LVL_ALL,"interrupt urb error %d", status);$ ERROR: space required after that ',' (ctx:VxV) + BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, INTF_INIT, DBG_LVL_ALL,"interrupt urb error %d", status); ^ ERROR: space required after that ',' (ctx:VxV) + BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, INTF_INIT, DBG_LVL_ALL,"interrupt urb error %d", status); ^ WARNING: space prohibited before semicolon + urb->status = STATUS_SUCCESS ; WARNING: space prohibited before semicolon + break ; ERROR: do not use C99 // comments + //return; ERROR: spaces required around that ':' (ctx:VxE) + default: ^ WARNING: line over 80 characters + //This is required to check what is the defaults conditions when it occurs.. ERROR: do not use C99 // comments + //This is required to check what is the defaults conditions when it occurs.. WARNING: line over 80 characters + BCM_DEBUG_PRINT(Adapter,DBG_TYPE_TX, NEXT_SEND, DBG_LVL_ALL,"GOT DEFAULT INTERRUPT URB STATUS :%d..Please Analyze it...", status); ERROR: space required after that ',' (ctx:VxV) + BCM_DEBUG_PRINT(Adapter,DBG_TYPE_TX, NEXT_SEND, DBG_LVL_ALL,"GOT DEFAULT INTERRUPT URB STATUS :%d..Please Analyze it...", status); ^ ERROR: space required after that ',' (ctx:VxV) + BCM_DEBUG_PRINT(Adapter,DBG_TYPE_TX, NEXT_SEND, DBG_LVL_ALL,"GOT DEFAULT INTERRUPT URB STATUS :%d..Please Analyze it...", status); ^ Signed-off-by: Jade Bilkey Signed-off-by: Greg Kroah-Hartman --- drivers/staging/bcm/InterfaceIsr.c | 137 ++++++++++++++++------------- 1 file changed, 77 insertions(+), 60 deletions(-) diff --git a/drivers/staging/bcm/InterfaceIsr.c b/drivers/staging/bcm/InterfaceIsr.c index 1ad80c6eefcc..ff395132ea06 100644 --- a/drivers/staging/bcm/InterfaceIsr.c +++ b/drivers/staging/bcm/InterfaceIsr.c @@ -29,85 +29,102 @@ static void read_int_callback(struct urb *urb/*, struct pt_regs *regs*/) } switch (status) { - /* success */ - case STATUS_SUCCESS: - if ( urb->actual_length ) - { - - if(psIntfAdapter->ulInterruptData[1] & 0xFF) - { - BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, INTF_INIT, DBG_LVL_ALL, "Got USIM interrupt"); + /* success */ + case STATUS_SUCCESS: + if (urb->actual_length) { + + if (psIntfAdapter->ulInterruptData[1] & 0xFF) { + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, + INTF_INIT, DBG_LVL_ALL, + "Got USIM interrupt"); } - if(psIntfAdapter->ulInterruptData[1] & 0xFF00) - { + if (psIntfAdapter->ulInterruptData[1] & 0xFF00) { atomic_set(&Adapter->CurrNumFreeTxDesc, - (psIntfAdapter->ulInterruptData[1] & 0xFF00) >> 8); - atomic_set (&Adapter->uiMBupdate, TRUE); - BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, INTF_INIT, DBG_LVL_ALL, "TX mailbox contains %d", + (psIntfAdapter->ulInterruptData[1] & + 0xFF00) >> 8); + atomic_set(&Adapter->uiMBupdate, TRUE); + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, + INTF_INIT, DBG_LVL_ALL, + "TX mailbox contains %d", atomic_read(&Adapter->CurrNumFreeTxDesc)); } - if(psIntfAdapter->ulInterruptData[1] >> 16) - { - Adapter->CurrNumRecvDescs= + if (psIntfAdapter->ulInterruptData[1] >> 16) { + Adapter->CurrNumRecvDescs = (psIntfAdapter->ulInterruptData[1] >> 16); - BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, INTF_INIT, DBG_LVL_ALL,"RX mailbox contains %d", - Adapter->CurrNumRecvDescs); + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, + INTF_INIT, DBG_LVL_ALL, + "RX mailbox contains %d", + Adapter->CurrNumRecvDescs); InterfaceRx(psIntfAdapter); } - if(Adapter->fw_download_done && + if (Adapter->fw_download_done && !Adapter->downloadDDR && - atomic_read(&Adapter->CurrNumFreeTxDesc)) - { - psIntfAdapter->psAdapter->downloadDDR +=1; + atomic_read(&Adapter->CurrNumFreeTxDesc)) { + + psIntfAdapter->psAdapter->downloadDDR += 1; wake_up(&Adapter->tx_packet_wait_queue); } - if(false == Adapter->waiting_to_fw_download_done) - { + if (false == Adapter->waiting_to_fw_download_done) { Adapter->waiting_to_fw_download_done = TRUE; wake_up(&Adapter->ioctl_fw_dnld_wait_queue); } - if(!atomic_read(&Adapter->TxPktAvail)) - { + if (!atomic_read(&Adapter->TxPktAvail)) { atomic_set(&Adapter->TxPktAvail, 1); wake_up(&Adapter->tx_packet_wait_queue); } - BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, INTF_INIT, DBG_LVL_ALL,"Firing interrupt in URB"); + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, INTF_INIT, + DBG_LVL_ALL, "Firing interrupt in URB"); } break; - case -ENOENT : - { - BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, INTF_INIT, DBG_LVL_ALL,"URB has got disconnected ...."); - return ; - } - case -EINPROGRESS: - { - //This situation may happened when URBunlink is used. for detail check usb_unlink_urb documentation. - BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, INTF_INIT, DBG_LVL_ALL,"Impossibe condition has occurred... something very bad is going on"); - break ; - //return; - } - case -EPIPE: - { - BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, INTF_INIT, DBG_LVL_ALL,"Interrupt IN endPoint has got halted/stalled...need to clear this"); - Adapter->bEndPointHalted = TRUE ; - wake_up(&Adapter->tx_packet_wait_queue); - urb->status = STATUS_SUCCESS ; - return; - } - /* software-driven interface shutdown */ - case -ECONNRESET: //URB got unlinked. - case -ESHUTDOWN: // hardware gone. this is the serious problem. - //Occurs only when something happens with the host controller device - case -ENODEV : //Device got removed - case -EINVAL : //Some thing very bad happened with the URB. No description is available. - BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, INTF_INIT, DBG_LVL_ALL,"interrupt urb error %d", status); - urb->status = STATUS_SUCCESS ; - break ; - //return; - default: - //This is required to check what is the defaults conditions when it occurs.. - BCM_DEBUG_PRINT(Adapter,DBG_TYPE_TX, NEXT_SEND, DBG_LVL_ALL,"GOT DEFAULT INTERRUPT URB STATUS :%d..Please Analyze it...", status); + case -ENOENT: + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, INTF_INIT, + DBG_LVL_ALL, "URB has got disconnected...."); + return; + case -EINPROGRESS: + /* + * This situation may happened when URBunlink is used. for + * detail check usb_unlink_urb documentation. + */ + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, INTF_INIT, + DBG_LVL_ALL, + "Impossibe condition has occurred... something very bad is going on"); + break; + /* return; */ + case -EPIPE: + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, INTF_INIT, + DBG_LVL_ALL, + "Interrupt IN endPoint has got halted/stalled...need to clear this"); + Adapter->bEndPointHalted = TRUE; + wake_up(&Adapter->tx_packet_wait_queue); + urb->status = STATUS_SUCCESS; + return; + /* software-driven interface shutdown */ + case -ECONNRESET: /* URB got unlinked */ + case -ESHUTDOWN: /* hardware gone. this is the serious problem */ + /* + * Occurs only when something happens with the + * host controller device + */ + case -ENODEV: /* Device got removed */ + case -EINVAL: + /* + * Some thing very bad happened with the URB. No + * description is available. + */ + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, INTF_INIT, + DBG_LVL_ALL, "interrupt urb error %d", status); + urb->status = STATUS_SUCCESS; + break; + /* return; */ + default: + /* + * This is required to check what is the defaults conditions + * when it occurs.. + */ + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, NEXT_SEND, DBG_LVL_ALL, + "GOT DEFAULT INTERRUPT URB STATUS :%d..Please Analyze it...", + status); break; } -- 2.34.1