From 98ba16bb22d12740a246b8339db4969e2822ce33 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Wed, 1 Oct 2014 23:44:17 +0200 Subject: [PATCH] ARM: nomadik: push ethernet down to board The SoC file defines the location and type of the ethernet adapter, this should be in the per-board file, as it is by no means necessary to have an ethernet adapter connected to this memory space. Signed-off-by: Linus Walleij --- arch/arm/boot/dts/ste-nomadik-s8815.dts | 24 ++++++++++++++-------- arch/arm/boot/dts/ste-nomadik-stn8815.dtsi | 12 ----------- 2 files changed, 16 insertions(+), 20 deletions(-) diff --git a/arch/arm/boot/dts/ste-nomadik-s8815.dts b/arch/arm/boot/dts/ste-nomadik-s8815.dts index 33caad8df276..e411ff7769fe 100644 --- a/arch/arm/boot/dts/ste-nomadik-s8815.dts +++ b/arch/arm/boot/dts/ste-nomadik-s8815.dts @@ -4,6 +4,7 @@ */ /dts-v1/; +#include #include "ste-nomadik-stn8815.dtsi" / { @@ -14,14 +15,6 @@ bootargs = "root=/dev/ram0 console=ttyAMA1,115200n8 earlyprintk"; }; - /* This is where the interrupt is routed on the S8815 board */ - external-bus@34000000 { - ethernet@300 { - interrupt-parent = <&gpio3>; - interrupts = <8 0x1>; - }; - }; - src@101e0000 { /* These chrystal drivers are not used on this board */ disable-sxtalo; @@ -73,6 +66,21 @@ }; }; + /* Ethernet */ + external-bus@34000000 { + compatible = "simple-bus"; + reg = <0x34000000 0x1000000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x34000000 0x1000000>; + ethernet@300 { + compatible = "smsc,lan91c111"; + reg = <0x300 0x0fd00>; + interrupt-parent = <&gpio3>; + interrupts = <8 IRQ_TYPE_EDGE_RISING>; + }; + }; + /* GPIO I2C connected to the USB portions of the STw4811 only */ gpio-i2c { compatible = "i2c-gpio"; diff --git a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi index c638c1ce2fc4..f435ff20aefe 100644 --- a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi +++ b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi @@ -673,18 +673,6 @@ }; }; - external-bus@34000000 { - compatible = "simple-bus"; - reg = <0x34000000 0x1000000>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x34000000 0x1000000>; - ethernet@300 { - compatible = "smsc,lan91c111"; - reg = <0x300 0x0fd00>; - }; - }; - /* I2C0 connected to the STw4811 power management chip */ i2c0 { compatible = "st,nomadik-i2c", "arm,primecell"; -- 2.34.1