From 9994a33865f4d55c44c9731c01e1f891543278de Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Mon, 10 Oct 2005 22:36:14 +1000 Subject: [PATCH] powerpc: Introduce entry_{32,64}.S, misc_{32,64}.S, systbl.S The system call table has been consolidated into systbl.S. We have separate 32-bit and 64-bit versions of entry.S and misc.S since the code is mostly sufficiently different to be not worth merging. There are some common bits that will be extracted in future. Signed-off-by: Paul Mackerras --- arch/powerpc/Makefile | 3 +- arch/powerpc/kernel/Makefile | 6 +- arch/powerpc/kernel/entry_32.S | 1002 ++++++++++++++++++++++++++++++ arch/powerpc/kernel/entry_64.S | 842 ++++++++++++++++++++++++++ arch/powerpc/kernel/misc_32.S | 1039 ++++++++++++++++++++++++++++++++ arch/powerpc/kernel/misc_64.S | 898 +++++++++++++++++++++++++++ arch/powerpc/kernel/systbl.S | 323 ++++++++++ 7 files changed, 4109 insertions(+), 4 deletions(-) create mode 100644 arch/powerpc/kernel/entry_32.S create mode 100644 arch/powerpc/kernel/entry_64.S create mode 100644 arch/powerpc/kernel/misc_32.S create mode 100644 arch/powerpc/kernel/misc_64.S create mode 100644 arch/powerpc/kernel/systbl.S diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile index a4c605f469d4..27649cfc2a5d 100644 --- a/arch/powerpc/Makefile +++ b/arch/powerpc/Makefile @@ -119,10 +119,9 @@ head-$(CONFIG_4xx) := arch/powerpc/kernel/head_4xx.o head-$(CONFIG_44x) := arch/powerpc/kernel/head_44x.o head-$(CONFIG_FSL_BOOKE) := arch/powerpc/kernel/head_fsl_booke.o -ifeq ($(CONFIG_PPC32),y) head-$(CONFIG_6xx) += arch/powerpc/kernel/idle_6xx.o +head-$(CONFIG_PPC64) += arch/powerpc/kernel/entry_64.o head-$(CONFIG_PPC_FPU) += arch/powerpc/kernel/fpu.o -endif core-y += arch/powerpc/kernel/ \ arch/$(OLDARCH)/kernel/ \ diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile index 344cab678c6a..0625470a6235 100644 --- a/arch/powerpc/kernel/Makefile +++ b/arch/powerpc/kernel/Makefile @@ -17,12 +17,14 @@ extra-$(CONFIG_44x) := head_44x.o extra-$(CONFIG_FSL_BOOKE) := head_fsl_booke.o extra-$(CONFIG_8xx) := head_8xx.o extra-$(CONFIG_6xx) += idle_6xx.o +extra-$(CONFIG_PPC64) += entry_64.o extra-$(CONFIG_PPC_FPU) += fpu.o extra-y += vmlinux.lds -obj-y := traps.o prom.o semaphore.o -obj-$(CONFIG_PPC32) += setup_32.o process.o +obj-y += traps.o prom.o semaphore.o +obj-$(CONFIG_PPC32) += entry_32.o setup_32.o misc_32.o obj-$(CONFIG_PPC64) += idle_power4.o +obj-$(CONFIG_PPC64) += misc_64.o ifeq ($(CONFIG_PPC32),y) obj-$(CONFIG_PPC_OF) += prom_init.o of_device.o obj-$(CONFIG_MODULES) += ppc_ksyms.o diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S new file mode 100644 index 000000000000..094eea6fbd69 --- /dev/null +++ b/arch/powerpc/kernel/entry_32.S @@ -0,0 +1,1002 @@ +/* + * PowerPC version + * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) + * Rewritten by Cort Dougan (cort@fsmlabs.com) for PReP + * Copyright (C) 1996 Cort Dougan + * Adapted for Power Macintosh by Paul Mackerras. + * Low-level exception handlers and MMU support + * rewritten by Paul Mackerras. + * Copyright (C) 1996 Paul Mackerras. + * MPC8xx modifications Copyright (C) 1997 Dan Malek (dmalek@jlc.net). + * + * This file contains the system call entry code, context switch + * code, and exception/interrupt return code for PowerPC. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#undef SHOW_SYSCALLS +#undef SHOW_SYSCALLS_TASK + +/* + * MSR_KERNEL is > 0x10000 on 4xx/Book-E since it include MSR_CE. + */ +#if MSR_KERNEL >= 0x10000 +#define LOAD_MSR_KERNEL(r, x) lis r,(x)@h; ori r,r,(x)@l +#else +#define LOAD_MSR_KERNEL(r, x) li r,(x) +#endif + +#ifdef CONFIG_BOOKE +#include "head_booke.h" +#define TRANSFER_TO_HANDLER_EXC_LEVEL(exc_level) \ + mtspr exc_level##_SPRG,r8; \ + BOOKE_LOAD_EXC_LEVEL_STACK(exc_level); \ + lwz r0,GPR10-INT_FRAME_SIZE(r8); \ + stw r0,GPR10(r11); \ + lwz r0,GPR11-INT_FRAME_SIZE(r8); \ + stw r0,GPR11(r11); \ + mfspr r8,exc_level##_SPRG + + .globl mcheck_transfer_to_handler +mcheck_transfer_to_handler: + TRANSFER_TO_HANDLER_EXC_LEVEL(MCHECK) + b transfer_to_handler_full + + .globl debug_transfer_to_handler +debug_transfer_to_handler: + TRANSFER_TO_HANDLER_EXC_LEVEL(DEBUG) + b transfer_to_handler_full + + .globl crit_transfer_to_handler +crit_transfer_to_handler: + TRANSFER_TO_HANDLER_EXC_LEVEL(CRIT) + /* fall through */ +#endif + +#ifdef CONFIG_40x + .globl crit_transfer_to_handler +crit_transfer_to_handler: + lwz r0,crit_r10@l(0) + stw r0,GPR10(r11) + lwz r0,crit_r11@l(0) + stw r0,GPR11(r11) + /* fall through */ +#endif + +/* + * This code finishes saving the registers to the exception frame + * and jumps to the appropriate handler for the exception, turning + * on address translation. + * Note that we rely on the caller having set cr0.eq iff the exception + * occurred in kernel mode (i.e. MSR:PR = 0). + */ + .globl transfer_to_handler_full +transfer_to_handler_full: + SAVE_NVGPRS(r11) + /* fall through */ + + .globl transfer_to_handler +transfer_to_handler: + stw r2,GPR2(r11) + stw r12,_NIP(r11) + stw r9,_MSR(r11) + andi. r2,r9,MSR_PR + mfctr r12 + mfspr r2,SPRN_XER + stw r12,_CTR(r11) + stw r2,_XER(r11) + mfspr r12,SPRN_SPRG3 + addi r2,r12,-THREAD + tovirt(r2,r2) /* set r2 to current */ + beq 2f /* if from user, fix up THREAD.regs */ + addi r11,r1,STACK_FRAME_OVERHEAD + stw r11,PT_REGS(r12) +#if defined(CONFIG_40x) || defined(CONFIG_BOOKE) + /* Check to see if the dbcr0 register is set up to debug. Use the + single-step bit to do this. */ + lwz r12,THREAD_DBCR0(r12) + andis. r12,r12,DBCR0_IC@h + beq+ 3f + /* From user and task is ptraced - load up global dbcr0 */ + li r12,-1 /* clear all pending debug events */ + mtspr SPRN_DBSR,r12 + lis r11,global_dbcr0@ha + tophys(r11,r11) + addi r11,r11,global_dbcr0@l + lwz r12,0(r11) + mtspr SPRN_DBCR0,r12 + lwz r12,4(r11) + addi r12,r12,-1 + stw r12,4(r11) +#endif + b 3f +2: /* if from kernel, check interrupted DOZE/NAP mode and + * check for stack overflow + */ +#ifdef CONFIG_6xx + mfspr r11,SPRN_HID0 + mtcr r11 +BEGIN_FTR_SECTION + bt- 8,power_save_6xx_restore /* Check DOZE */ +END_FTR_SECTION_IFSET(CPU_FTR_CAN_DOZE) +BEGIN_FTR_SECTION + bt- 9,power_save_6xx_restore /* Check NAP */ +END_FTR_SECTION_IFSET(CPU_FTR_CAN_NAP) +#endif /* CONFIG_6xx */ + .globl transfer_to_handler_cont +transfer_to_handler_cont: + lwz r11,THREAD_INFO-THREAD(r12) + cmplw r1,r11 /* if r1 <= current->thread_info */ + ble- stack_ovf /* then the kernel stack overflowed */ +3: + mflr r9 + lwz r11,0(r9) /* virtual address of handler */ + lwz r9,4(r9) /* where to go when done */ + FIX_SRR1(r10,r12) + mtspr SPRN_SRR0,r11 + mtspr SPRN_SRR1,r10 + mtlr r9 + SYNC + RFI /* jump to handler, enable MMU */ + +/* + * On kernel stack overflow, load up an initial stack pointer + * and call StackOverflow(regs), which should not return. + */ +stack_ovf: + /* sometimes we use a statically-allocated stack, which is OK. */ + lis r11,_end@h + ori r11,r11,_end@l + cmplw r1,r11 + ble 3b /* r1 <= &_end is OK */ + SAVE_NVGPRS(r11) + addi r3,r1,STACK_FRAME_OVERHEAD + lis r1,init_thread_union@ha + addi r1,r1,init_thread_union@l + addi r1,r1,THREAD_SIZE-STACK_FRAME_OVERHEAD + lis r9,StackOverflow@ha + addi r9,r9,StackOverflow@l + LOAD_MSR_KERNEL(r10,MSR_KERNEL) + FIX_SRR1(r10,r12) + mtspr SPRN_SRR0,r9 + mtspr SPRN_SRR1,r10 + SYNC + RFI + +/* + * Handle a system call. + */ + .stabs "arch/powerpc/kernel/",N_SO,0,0,0f + .stabs "entry_32.S",N_SO,0,0,0f +0: + +_GLOBAL(DoSyscall) + stw r0,THREAD+LAST_SYSCALL(r2) + stw r3,ORIG_GPR3(r1) + li r12,0 + stw r12,RESULT(r1) + lwz r11,_CCR(r1) /* Clear SO bit in CR */ + rlwinm r11,r11,0,4,2 + stw r11,_CCR(r1) +#ifdef SHOW_SYSCALLS + bl do_show_syscall +#endif /* SHOW_SYSCALLS */ + rlwinm r10,r1,0,0,18 /* current_thread_info() */ + lwz r11,TI_LOCAL_FLAGS(r10) + rlwinm r11,r11,0,~_TIFL_FORCE_NOERROR + stw r11,TI_LOCAL_FLAGS(r10) + lwz r11,TI_FLAGS(r10) + andi. r11,r11,_TIF_SYSCALL_T_OR_A + bne- syscall_dotrace +syscall_dotrace_cont: + cmplwi 0,r0,NR_syscalls + lis r10,sys_call_table@h + ori r10,r10,sys_call_table@l + slwi r0,r0,2 + bge- 66f + lwzx r10,r10,r0 /* Fetch system call handler [ptr] */ + mtlr r10 + addi r9,r1,STACK_FRAME_OVERHEAD + PPC440EP_ERR42 + blrl /* Call handler */ + .globl ret_from_syscall +ret_from_syscall: +#ifdef SHOW_SYSCALLS + bl do_show_syscall_exit +#endif + mr r6,r3 + li r11,-_LAST_ERRNO + cmplw 0,r3,r11 + rlwinm r12,r1,0,0,18 /* current_thread_info() */ + blt+ 30f + lwz r11,TI_LOCAL_FLAGS(r12) + andi. r11,r11,_TIFL_FORCE_NOERROR + bne 30f + neg r3,r3 + lwz r10,_CCR(r1) /* Set SO bit in CR */ + oris r10,r10,0x1000 + stw r10,_CCR(r1) + + /* disable interrupts so current_thread_info()->flags can't change */ +30: LOAD_MSR_KERNEL(r10,MSR_KERNEL) /* doesn't include MSR_EE */ + SYNC + MTMSRD(r10) + lwz r9,TI_FLAGS(r12) + andi. r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SIGPENDING|_TIF_NEED_RESCHED) + bne- syscall_exit_work +syscall_exit_cont: +#if defined(CONFIG_4xx) || defined(CONFIG_BOOKE) + /* If the process has its own DBCR0 value, load it up. The single + step bit tells us that dbcr0 should be loaded. */ + lwz r0,THREAD+THREAD_DBCR0(r2) + andis. r10,r0,DBCR0_IC@h + bnel- load_dbcr0 +#endif + stwcx. r0,0,r1 /* to clear the reservation */ + lwz r4,_LINK(r1) + lwz r5,_CCR(r1) + mtlr r4 + mtcr r5 + lwz r7,_NIP(r1) + lwz r8,_MSR(r1) + FIX_SRR1(r8, r0) + lwz r2,GPR2(r1) + lwz r1,GPR1(r1) + mtspr SPRN_SRR0,r7 + mtspr SPRN_SRR1,r8 + SYNC + RFI + +66: li r3,-ENOSYS + b ret_from_syscall + + .globl ret_from_fork +ret_from_fork: + REST_NVGPRS(r1) + bl schedule_tail + li r3,0 + b ret_from_syscall + +/* Traced system call support */ +syscall_dotrace: + SAVE_NVGPRS(r1) + li r0,0xc00 + stw r0,TRAP(r1) + addi r3,r1,STACK_FRAME_OVERHEAD + bl do_syscall_trace_enter + lwz r0,GPR0(r1) /* Restore original registers */ + lwz r3,GPR3(r1) + lwz r4,GPR4(r1) + lwz r5,GPR5(r1) + lwz r6,GPR6(r1) + lwz r7,GPR7(r1) + lwz r8,GPR8(r1) + REST_NVGPRS(r1) + b syscall_dotrace_cont + +syscall_exit_work: + stw r6,RESULT(r1) /* Save result */ + stw r3,GPR3(r1) /* Update return value */ + andi. r0,r9,_TIF_SYSCALL_T_OR_A + beq 5f + ori r10,r10,MSR_EE + SYNC + MTMSRD(r10) /* re-enable interrupts */ + lwz r4,TRAP(r1) + andi. r4,r4,1 + beq 4f + SAVE_NVGPRS(r1) + li r4,0xc00 + stw r4,TRAP(r1) +4: + addi r3,r1,STACK_FRAME_OVERHEAD + bl do_syscall_trace_leave + REST_NVGPRS(r1) +2: + lwz r3,GPR3(r1) + LOAD_MSR_KERNEL(r10,MSR_KERNEL) /* doesn't include MSR_EE */ + SYNC + MTMSRD(r10) /* disable interrupts again */ + rlwinm r12,r1,0,0,18 /* current_thread_info() */ + lwz r9,TI_FLAGS(r12) +5: + andi. r0,r9,_TIF_NEED_RESCHED + bne 1f + lwz r5,_MSR(r1) + andi. r5,r5,MSR_PR + beq syscall_exit_cont + andi. r0,r9,_TIF_SIGPENDING + beq syscall_exit_cont + b do_user_signal +1: + ori r10,r10,MSR_EE + SYNC + MTMSRD(r10) /* re-enable interrupts */ + bl schedule + b 2b + +#ifdef SHOW_SYSCALLS +do_show_syscall: +#ifdef SHOW_SYSCALLS_TASK + lis r11,show_syscalls_task@ha + lwz r11,show_syscalls_task@l(r11) + cmp 0,r2,r11 + bnelr +#endif + stw r31,GPR31(r1) + mflr r31 + lis r3,7f@ha + addi r3,r3,7f@l + lwz r4,GPR0(r1) + lwz r5,GPR3(r1) + lwz r6,GPR4(r1) + lwz r7,GPR5(r1) + lwz r8,GPR6(r1) + lwz r9,GPR7(r1) + bl printk + lis r3,77f@ha + addi r3,r3,77f@l + lwz r4,GPR8(r1) + mr r5,r2 + bl printk + lwz r0,GPR0(r1) + lwz r3,GPR3(r1) + lwz r4,GPR4(r1) + lwz r5,GPR5(r1) + lwz r6,GPR6(r1) + lwz r7,GPR7(r1) + lwz r8,GPR8(r1) + mtlr r31 + lwz r31,GPR31(r1) + blr + +do_show_syscall_exit: +#ifdef SHOW_SYSCALLS_TASK + lis r11,show_syscalls_task@ha + lwz r11,show_syscalls_task@l(r11) + cmp 0,r2,r11 + bnelr +#endif + stw r31,GPR31(r1) + mflr r31 + stw r3,RESULT(r1) /* Save result */ + mr r4,r3 + lis r3,79f@ha + addi r3,r3,79f@l + bl printk + lwz r3,RESULT(r1) + mtlr r31 + lwz r31,GPR31(r1) + blr + +7: .string "syscall %d(%x, %x, %x, %x, %x, " +77: .string "%x), current=%p\n" +79: .string " -> %x\n" + .align 2,0 + +#ifdef SHOW_SYSCALLS_TASK + .data + .globl show_syscalls_task +show_syscalls_task: + .long -1 + .text +#endif +#endif /* SHOW_SYSCALLS */ + +/* + * The sigsuspend and rt_sigsuspend system calls can call do_signal + * and thus put the process into the stopped state where we might + * want to examine its user state with ptrace. Therefore we need + * to save all the nonvolatile registers (r13 - r31) before calling + * the C code. + */ + .globl ppc_sigsuspend +ppc_sigsuspend: + SAVE_NVGPRS(r1) + lwz r0,TRAP(r1) + rlwinm r0,r0,0,0,30 /* clear LSB to indicate full */ + stw r0,TRAP(r1) /* register set saved */ + b sys_sigsuspend + + .globl ppc_rt_sigsuspend +ppc_rt_sigsuspend: + SAVE_NVGPRS(r1) + lwz r0,TRAP(r1) + rlwinm r0,r0,0,0,30 + stw r0,TRAP(r1) + b sys_rt_sigsuspend + + .globl ppc_fork +ppc_fork: + SAVE_NVGPRS(r1) + lwz r0,TRAP(r1) + rlwinm r0,r0,0,0,30 /* clear LSB to indicate full */ + stw r0,TRAP(r1) /* register set saved */ + b sys_fork + + .globl ppc_vfork +ppc_vfork: + SAVE_NVGPRS(r1) + lwz r0,TRAP(r1) + rlwinm r0,r0,0,0,30 /* clear LSB to indicate full */ + stw r0,TRAP(r1) /* register set saved */ + b sys_vfork + + .globl ppc_clone +ppc_clone: + SAVE_NVGPRS(r1) + lwz r0,TRAP(r1) + rlwinm r0,r0,0,0,30 /* clear LSB to indicate full */ + stw r0,TRAP(r1) /* register set saved */ + b sys_clone + + .globl ppc_swapcontext +ppc_swapcontext: + SAVE_NVGPRS(r1) + lwz r0,TRAP(r1) + rlwinm r0,r0,0,0,30 /* clear LSB to indicate full */ + stw r0,TRAP(r1) /* register set saved */ + b sys_swapcontext + +/* + * Top-level page fault handling. + * This is in assembler because if do_page_fault tells us that + * it is a bad kernel page fault, we want to save the non-volatile + * registers before calling bad_page_fault. + */ + .globl handle_page_fault +handle_page_fault: + stw r4,_DAR(r1) + addi r3,r1,STACK_FRAME_OVERHEAD + bl do_page_fault + cmpwi r3,0 + beq+ ret_from_except + SAVE_NVGPRS(r1) + lwz r0,TRAP(r1) + clrrwi r0,r0,1 + stw r0,TRAP(r1) + mr r5,r3 + addi r3,r1,STACK_FRAME_OVERHEAD + lwz r4,_DAR(r1) + bl bad_page_fault + b ret_from_except_full + +/* + * This routine switches between two different tasks. The process + * state of one is saved on its kernel stack. Then the state + * of the other is restored from its kernel stack. The memory + * management hardware is updated to the second process's state. + * Finally, we can return to the second process. + * On entry, r3 points to the THREAD for the current task, r4 + * points to the THREAD for the new task. + * + * This routine is always called with interrupts disabled. + * + * Note: there are two ways to get to the "going out" portion + * of this code; either by coming in via the entry (_switch) + * or via "fork" which must set up an environment equivalent + * to the "_switch" path. If you change this , you'll have to + * change the fork code also. + * + * The code which creates the new task context is in 'copy_thread' + * in arch/ppc/kernel/process.c + */ +_GLOBAL(_switch) + stwu r1,-INT_FRAME_SIZE(r1) + mflr r0 + stw r0,INT_FRAME_SIZE+4(r1) + /* r3-r12 are caller saved -- Cort */ + SAVE_NVGPRS(r1) + stw r0,_NIP(r1) /* Return to switch caller */ + mfmsr r11 + li r0,MSR_FP /* Disable floating-point */ +#ifdef CONFIG_ALTIVEC +BEGIN_FTR_SECTION + oris r0,r0,MSR_VEC@h /* Disable altivec */ + mfspr r12,SPRN_VRSAVE /* save vrsave register value */ + stw r12,THREAD+THREAD_VRSAVE(r2) +END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC) +#endif /* CONFIG_ALTIVEC */ +#ifdef CONFIG_SPE + oris r0,r0,MSR_SPE@h /* Disable SPE */ + mfspr r12,SPRN_SPEFSCR /* save spefscr register value */ + stw r12,THREAD+THREAD_SPEFSCR(r2) +#endif /* CONFIG_SPE */ + and. r0,r0,r11 /* FP or altivec or SPE enabled? */ + beq+ 1f + andc r11,r11,r0 + MTMSRD(r11) + isync +1: stw r11,_MSR(r1) + mfcr r10 + stw r10,_CCR(r1) + stw r1,KSP(r3) /* Set old stack pointer */ + +#ifdef CONFIG_SMP + /* We need a sync somewhere here to make sure that if the + * previous task gets rescheduled on another CPU, it sees all + * stores it has performed on this one. + */ + sync +#endif /* CONFIG_SMP */ + + tophys(r0,r4) + CLR_TOP32(r0) + mtspr SPRN_SPRG3,r0 /* Update current THREAD phys addr */ + lwz r1,KSP(r4) /* Load new stack pointer */ + + /* save the old current 'last' for return value */ + mr r3,r2 + addi r2,r4,-THREAD /* Update current */ + +#ifdef CONFIG_ALTIVEC +BEGIN_FTR_SECTION + lwz r0,THREAD+THREAD_VRSAVE(r2) + mtspr SPRN_VRSAVE,r0 /* if G4, restore VRSAVE reg */ +END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC) +#endif /* CONFIG_ALTIVEC */ +#ifdef CONFIG_SPE + lwz r0,THREAD+THREAD_SPEFSCR(r2) + mtspr SPRN_SPEFSCR,r0 /* restore SPEFSCR reg */ +#endif /* CONFIG_SPE */ + + lwz r0,_CCR(r1) + mtcrf 0xFF,r0 + /* r3-r12 are destroyed -- Cort */ + REST_NVGPRS(r1) + + lwz r4,_NIP(r1) /* Return to _switch caller in new task */ + mtlr r4 + addi r1,r1,INT_FRAME_SIZE + blr + + .globl fast_exception_return +fast_exception_return: +#if !(defined(CONFIG_4xx) || defined(CONFIG_BOOKE)) + andi. r10,r9,MSR_RI /* check for recoverable interrupt */ + beq 1f /* if not, we've got problems */ +#endif + +2: REST_4GPRS(3, r11) + lwz r10,_CCR(r11) + REST_GPR(1, r11) + mtcr r10 + lwz r10,_LINK(r11) + mtlr r10 + REST_GPR(10, r11) + mtspr SPRN_SRR1,r9 + mtspr SPRN_SRR0,r12 + REST_GPR(9, r11) + REST_GPR(12, r11) + lwz r11,GPR11(r11) + SYNC + RFI + +#if !(defined(CONFIG_4xx) || defined(CONFIG_BOOKE)) +/* check if the exception happened in a restartable section */ +1: lis r3,exc_exit_restart_end@ha + addi r3,r3,exc_exit_restart_end@l + cmplw r12,r3 + bge 3f + lis r4,exc_exit_restart@ha + addi r4,r4,exc_exit_restart@l + cmplw r12,r4 + blt 3f + lis r3,fee_restarts@ha + tophys(r3,r3) + lwz r5,fee_restarts@l(r3) + addi r5,r5,1 + stw r5,fee_restarts@l(r3) + mr r12,r4 /* restart at exc_exit_restart */ + b 2b + + .comm fee_restarts,4 + +/* aargh, a nonrecoverable interrupt, panic */ +/* aargh, we don't know which trap this is */ +/* but the 601 doesn't implement the RI bit, so assume it's OK */ +3: +BEGIN_FTR_SECTION + b 2b +END_FTR_SECTION_IFSET(CPU_FTR_601) + li r10,-1 + stw r10,TRAP(r11) + addi r3,r1,STACK_FRAME_OVERHEAD + lis r10,MSR_KERNEL@h + ori r10,r10,MSR_KERNEL@l + bl transfer_to_handler_full + .long nonrecoverable_exception + .long ret_from_except +#endif + + .globl sigreturn_exit +sigreturn_exit: + subi r1,r3,STACK_FRAME_OVERHEAD + rlwinm r12,r1,0,0,18 /* current_thread_info() */ + lwz r9,TI_FLAGS(r12) + andi. r0,r9,_TIF_SYSCALL_T_OR_A + bnel- do_syscall_trace_leave + /* fall through */ + + .globl ret_from_except_full +ret_from_except_full: + REST_NVGPRS(r1) + /* fall through */ + + .globl ret_from_except +ret_from_except: + /* Hard-disable interrupts so that current_thread_info()->flags + * can't change between when we test it and when we return + * from the interrupt. */ + LOAD_MSR_KERNEL(r10,MSR_KERNEL) + SYNC /* Some chip revs have problems here... */ + MTMSRD(r10) /* disable interrupts */ + + lwz r3,_MSR(r1) /* Returning to user mode? */ + andi. r0,r3,MSR_PR + beq resume_kernel + +user_exc_return: /* r10 contains MSR_KERNEL here */ + /* Check current_thread_info()->flags */ + rlwinm r9,r1,0,0,18 + lwz r9,TI_FLAGS(r9) + andi. r0,r9,(_TIF_SIGPENDING|_TIF_NEED_RESCHED) + bne do_work + +restore_user: +#if defined(CONFIG_4xx) || defined(CONFIG_BOOKE) + /* Check whether this process has its own DBCR0 value. The single + step bit tells us that dbcr0 should be loaded. */ + lwz r0,THREAD+THREAD_DBCR0(r2) + andis. r10,r0,DBCR0_IC@h + bnel- load_dbcr0 +#endif + +#ifdef CONFIG_PREEMPT + b restore + +/* N.B. the only way to get here is from the beq following ret_from_except. */ +resume_kernel: + /* check current_thread_info->preempt_count */ + rlwinm r9,r1,0,0,18 + lwz r0,TI_PREEMPT(r9) + cmpwi 0,r0,0 /* if non-zero, just restore regs and return */ + bne restore + lwz r0,TI_FLAGS(r9) + andi. r0,r0,_TIF_NEED_RESCHED + beq+ restore + andi. r0,r3,MSR_EE /* interrupts off? */ + beq restore /* don't schedule if so */ +1: bl preempt_schedule_irq + rlwinm r9,r1,0,0,18 + lwz r3,TI_FLAGS(r9) + andi. r0,r3,_TIF_NEED_RESCHED + bne- 1b +#else +resume_kernel: +#endif /* CONFIG_PREEMPT */ + + /* interrupts are hard-disabled at this point */ +restore: + lwz r0,GPR0(r1) + lwz r2,GPR2(r1) + REST_4GPRS(3, r1) + REST_2GPRS(7, r1) + + lwz r10,_XER(r1) + lwz r11,_CTR(r1) + mtspr SPRN_XER,r10 + mtctr r11 + + PPC405_ERR77(0,r1) + stwcx. r0,0,r1 /* to clear the reservation */ + +#if !(defined(CONFIG_4xx) || defined(CONFIG_BOOKE)) + lwz r9,_MSR(r1) + andi. r10,r9,MSR_RI /* check if this exception occurred */ + beql nonrecoverable /* at a bad place (MSR:RI = 0) */ + + lwz r10,_CCR(r1) + lwz r11,_LINK(r1) + mtcrf 0xFF,r10 + mtlr r11 + + /* + * Once we put values in SRR0 and SRR1, we are in a state + * where exceptions are not recoverable, since taking an + * exception will trash SRR0 and SRR1. Therefore we clear the + * MSR:RI bit to indicate this. If we do take an exception, + * we can't return to the point of the exception but we + * can restart the exception exit path at the label + * exc_exit_restart below. -- paulus + */ + LOAD_MSR_KERNEL(r10,MSR_KERNEL & ~MSR_RI) + SYNC + MTMSRD(r10) /* clear the RI bit */ + .globl exc_exit_restart +exc_exit_restart: + lwz r9,_MSR(r1) + lwz r12,_NIP(r1) + FIX_SRR1(r9,r10) + mtspr SPRN_SRR0,r12 + mtspr SPRN_SRR1,r9 + REST_4GPRS(9, r1) + lwz r1,GPR1(r1) + .globl exc_exit_restart_end +exc_exit_restart_end: + SYNC + RFI + +#else /* !(CONFIG_4xx || CONFIG_BOOKE) */ + /* + * This is a bit different on 4xx/Book-E because it doesn't have + * the RI bit in the MSR. + * The TLB miss handler checks if we have interrupted + * the exception exit path and restarts it if so + * (well maybe one day it will... :). + */ + lwz r11,_LINK(r1) + mtlr r11 + lwz r10,_CCR(r1) + mtcrf 0xff,r10 + REST_2GPRS(9, r1) + .globl exc_exit_restart +exc_exit_restart: + lwz r11,_NIP(r1) + lwz r12,_MSR(r1) +exc_exit_start: + mtspr SPRN_SRR0,r11 + mtspr SPRN_SRR1,r12 + REST_2GPRS(11, r1) + lwz r1,GPR1(r1) + .globl exc_exit_restart_end +exc_exit_restart_end: + PPC405_ERR77_SYNC + rfi + b . /* prevent prefetch past rfi */ + +/* + * Returning from a critical interrupt in user mode doesn't need + * to be any different from a normal exception. For a critical + * interrupt in the kernel, we just return (without checking for + * preemption) since the interrupt may have happened at some crucial + * place (e.g. inside the TLB miss handler), and because we will be + * running with r1 pointing into critical_stack, not the current + * process's kernel stack (and therefore current_thread_info() will + * give the wrong answer). + * We have to restore various SPRs that may have been in use at the + * time of the critical interrupt. + * + */ +#ifdef CONFIG_40x +#define PPC_40x_TURN_OFF_MSR_DR \ + /* avoid any possible TLB misses here by turning off MSR.DR, we \ + * assume the instructions here are mapped by a pinned TLB entry */ \ + li r10,MSR_IR; \ + mtmsr r10; \ + isync; \ + tophys(r1, r1); +#else +#define PPC_40x_TURN_OFF_MSR_DR +#endif + +#define RET_FROM_EXC_LEVEL(exc_lvl_srr0, exc_lvl_srr1, exc_lvl_rfi) \ + REST_NVGPRS(r1); \ + lwz r3,_MSR(r1); \ + andi. r3,r3,MSR_PR; \ + LOAD_MSR_KERNEL(r10,MSR_KERNEL); \ + bne user_exc_return; \ + lwz r0,GPR0(r1); \ + lwz r2,GPR2(r1); \ + REST_4GPRS(3, r1); \ + REST_2GPRS(7, r1); \ + lwz r10,_XER(r1); \ + lwz r11,_CTR(r1); \ + mtspr SPRN_XER,r10; \ + mtctr r11; \ + PPC405_ERR77(0,r1); \ + stwcx. r0,0,r1; /* to clear the reservation */ \ + lwz r11,_LINK(r1); \ + mtlr r11; \ + lwz r10,_CCR(r1); \ + mtcrf 0xff,r10; \ + PPC_40x_TURN_OFF_MSR_DR; \ + lwz r9,_DEAR(r1); \ + lwz r10,_ESR(r1); \ + mtspr SPRN_DEAR,r9; \ + mtspr SPRN_ESR,r10; \ + lwz r11,_NIP(r1); \ + lwz r12,_MSR(r1); \ + mtspr exc_lvl_srr0,r11; \ + mtspr exc_lvl_srr1,r12; \ + lwz r9,GPR9(r1); \ + lwz r12,GPR12(r1); \ + lwz r10,GPR10(r1); \ + lwz r11,GPR11(r1); \ + lwz r1,GPR1(r1); \ + PPC405_ERR77_SYNC; \ + exc_lvl_rfi; \ + b .; /* prevent prefetch past exc_lvl_rfi */ + + .globl ret_from_crit_exc +ret_from_crit_exc: + RET_FROM_EXC_LEVEL(SPRN_CSRR0, SPRN_CSRR1, RFCI) + +#ifdef CONFIG_BOOKE + .globl ret_from_debug_exc +ret_from_debug_exc: + RET_FROM_EXC_LEVEL(SPRN_DSRR0, SPRN_DSRR1, RFDI) + + .globl ret_from_mcheck_exc +ret_from_mcheck_exc: + RET_FROM_EXC_LEVEL(SPRN_MCSRR0, SPRN_MCSRR1, RFMCI) +#endif /* CONFIG_BOOKE */ + +/* + * Load the DBCR0 value for a task that is being ptraced, + * having first saved away the global DBCR0. Note that r0 + * has the dbcr0 value to set upon entry to this. + */ +load_dbcr0: + mfmsr r10 /* first disable debug exceptions */ + rlwinm r10,r10,0,~MSR_DE + mtmsr r10 + isync + mfspr r10,SPRN_DBCR0 + lis r11,global_dbcr0@ha + addi r11,r11,global_dbcr0@l + stw r10,0(r11) + mtspr SPRN_DBCR0,r0 + lwz r10,4(r11) + addi r10,r10,1 + stw r10,4(r11) + li r11,-1 + mtspr SPRN_DBSR,r11 /* clear all pending debug events */ + blr + + .comm global_dbcr0,8 +#endif /* !(CONFIG_4xx || CONFIG_BOOKE) */ + +do_work: /* r10 contains MSR_KERNEL here */ + andi. r0,r9,_TIF_NEED_RESCHED + beq do_user_signal + +do_resched: /* r10 contains MSR_KERNEL here */ + ori r10,r10,MSR_EE + SYNC + MTMSRD(r10) /* hard-enable interrupts */ + bl schedule +recheck: + LOAD_MSR_KERNEL(r10,MSR_KERNEL) + SYNC + MTMSRD(r10) /* disable interrupts */ + rlwinm r9,r1,0,0,18 + lwz r9,TI_FLAGS(r9) + andi. r0,r9,_TIF_NEED_RESCHED + bne- do_resched + andi. r0,r9,_TIF_SIGPENDING + beq restore_user +do_user_signal: /* r10 contains MSR_KERNEL here */ + ori r10,r10,MSR_EE + SYNC + MTMSRD(r10) /* hard-enable interrupts */ + /* save r13-r31 in the exception frame, if not already done */ + lwz r3,TRAP(r1) + andi. r0,r3,1 + beq 2f + SAVE_NVGPRS(r1) + rlwinm r3,r3,0,0,30 + stw r3,TRAP(r1) +2: li r3,0 + addi r4,r1,STACK_FRAME_OVERHEAD + bl do_signal + REST_NVGPRS(r1) + b recheck + +/* + * We come here when we are at the end of handling an exception + * that occurred at a place where taking an exception will lose + * state information, such as the contents of SRR0 and SRR1. + */ +nonrecoverable: + lis r10,exc_exit_restart_end@ha + addi r10,r10,exc_exit_restart_end@l + cmplw r12,r10 + bge 3f + lis r11,exc_exit_restart@ha + addi r11,r11,exc_exit_restart@l + cmplw r12,r11 + blt 3f + lis r10,ee_restarts@ha + lwz r12,ee_restarts@l(r10) + addi r12,r12,1 + stw r12,ee_restarts@l(r10) + mr r12,r11 /* restart at exc_exit_restart */ + blr +3: /* OK, we can't recover, kill this process */ + /* but the 601 doesn't implement the RI bit, so assume it's OK */ +BEGIN_FTR_SECTION + blr +END_FTR_SECTION_IFSET(CPU_FTR_601) + lwz r3,TRAP(r1) + andi. r0,r3,1 + beq 4f + SAVE_NVGPRS(r1) + rlwinm r3,r3,0,0,30 + stw r3,TRAP(r1) +4: addi r3,r1,STACK_FRAME_OVERHEAD + bl nonrecoverable_exception + /* shouldn't return */ + b 4b + + .comm ee_restarts,4 + +/* + * PROM code for specific machines follows. Put it + * here so it's easy to add arch-specific sections later. + * -- Cort + */ +#ifdef CONFIG_PPC_OF +/* + * On CHRP, the Run-Time Abstraction Services (RTAS) have to be + * called with the MMU off. + */ +_GLOBAL(enter_rtas) + stwu r1,-INT_FRAME_SIZE(r1) + mflr r0 + stw r0,INT_FRAME_SIZE+4(r1) + lis r4,rtas_data@ha + lwz r4,rtas_data@l(r4) + lis r6,1f@ha /* physical return address for rtas */ + addi r6,r6,1f@l + tophys(r6,r6) + tophys(r7,r1) + lis r8,rtas_entry@ha + lwz r8,rtas_entry@l(r8) + mfmsr r9 + stw r9,8(r1) + LOAD_MSR_KERNEL(r0,MSR_KERNEL) + SYNC /* disable interrupts so SRR0/1 */ + MTMSRD(r0) /* don't get trashed */ + li r9,MSR_KERNEL & ~(MSR_IR|MSR_DR) + mtlr r6 + CLR_TOP32(r7) + mtspr SPRN_SPRG2,r7 + mtspr SPRN_SRR0,r8 + mtspr SPRN_SRR1,r9 + RFI +1: tophys(r9,r1) + lwz r8,INT_FRAME_SIZE+4(r9) /* get return address */ + lwz r9,8(r9) /* original msr value */ + FIX_SRR1(r9,r0) + addi r1,r1,INT_FRAME_SIZE + li r0,0 + mtspr SPRN_SPRG2,r0 + mtspr SPRN_SRR0,r8 + mtspr SPRN_SRR1,r9 + RFI /* return to caller */ + + .globl machine_check_in_rtas +machine_check_in_rtas: + twi 31,0,0 + /* XXX load up BATs and panic */ + +#endif /* CONFIG_PPC_OF */ diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S new file mode 100644 index 000000000000..22796e28881a --- /dev/null +++ b/arch/powerpc/kernel/entry_64.S @@ -0,0 +1,842 @@ +/* + * arch/ppc64/kernel/entry.S + * + * PowerPC version + * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) + * Rewritten by Cort Dougan (cort@cs.nmt.edu) for PReP + * Copyright (C) 1996 Cort Dougan + * Adapted for Power Macintosh by Paul Mackerras. + * Low-level exception handlers and MMU support + * rewritten by Paul Mackerras. + * Copyright (C) 1996 Paul Mackerras. + * MPC8xx modifications Copyright (C) 1997 Dan Malek (dmalek@jlc.net). + * + * This file contains the system call entry code, context switch + * code, and exception/interrupt return code for PowerPC. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#ifdef CONFIG_PPC_ISERIES +#define DO_SOFT_DISABLE +#endif + +/* + * System calls. + */ + .section ".toc","aw" +.SYS_CALL_TABLE: + .tc .sys_call_table[TC],.sys_call_table + +/* This value is used to mark exception frames on the stack. */ +exception_marker: + .tc ID_72656773_68657265[TC],0x7265677368657265 + + .section ".text" + .align 7 + +#undef SHOW_SYSCALLS + + .globl system_call_common +system_call_common: + andi. r10,r12,MSR_PR + mr r10,r1 + addi r1,r1,-INT_FRAME_SIZE + beq- 1f + ld r1,PACAKSAVE(r13) +1: std r10,0(r1) + std r11,_NIP(r1) + std r12,_MSR(r1) + std r0,GPR0(r1) + std r10,GPR1(r1) + std r2,GPR2(r1) + std r3,GPR3(r1) + std r4,GPR4(r1) + std r5,GPR5(r1) + std r6,GPR6(r1) + std r7,GPR7(r1) + std r8,GPR8(r1) + li r11,0 + std r11,GPR9(r1) + std r11,GPR10(r1) + std r11,GPR11(r1) + std r11,GPR12(r1) + std r9,GPR13(r1) + crclr so + mfcr r9 + mflr r10 + li r11,0xc01 + std r9,_CCR(r1) + std r10,_LINK(r1) + std r11,_TRAP(r1) + mfxer r9 + mfctr r10 + std r9,_XER(r1) + std r10,_CTR(r1) + std r3,ORIG_GPR3(r1) + ld r2,PACATOC(r13) + addi r9,r1,STACK_FRAME_OVERHEAD + ld r11,exception_marker@toc(r2) + std r11,-16(r9) /* "regshere" marker */ +#ifdef CONFIG_PPC_ISERIES + /* Hack for handling interrupts when soft-enabling on iSeries */ + cmpdi cr1,r0,0x5555 /* syscall 0x5555 */ + andi. r10,r12,MSR_PR /* from kernel */ + crand 4*cr0+eq,4*cr1+eq,4*cr0+eq + beq hardware_interrupt_entry + lbz r10,PACAPROCENABLED(r13) + std r10,SOFTE(r1) +#endif + mfmsr r11 + ori r11,r11,MSR_EE + mtmsrd r11,1 + +#ifdef SHOW_SYSCALLS + bl .do_show_syscall + REST_GPR(0,r1) + REST_4GPRS(3,r1) + REST_2GPRS(7,r1) + addi r9,r1,STACK_FRAME_OVERHEAD +#endif + clrrdi r11,r1,THREAD_SHIFT + li r12,0 + ld r10,TI_FLAGS(r11) + stb r12,TI_SC_NOERR(r11) + andi. r11,r10,_TIF_SYSCALL_T_OR_A + bne- syscall_dotrace +syscall_dotrace_cont: + cmpldi 0,r0,NR_syscalls + bge- syscall_enosys + +system_call: /* label this so stack traces look sane */ +/* + * Need to vector to 32 Bit or default sys_call_table here, + * based on caller's run-mode / personality. + */ + ld r11,.SYS_CALL_TABLE@toc(2) + andi. r10,r10,_TIF_32BIT + beq 15f + addi r11,r11,8 /* use 32-bit syscall entries */ + clrldi r3,r3,32 + clrldi r4,r4,32 + clrldi r5,r5,32 + clrldi r6,r6,32 + clrldi r7,r7,32 + clrldi r8,r8,32 +15: + slwi r0,r0,4 + ldx r10,r11,r0 /* Fetch system call handler [ptr] */ + mtctr r10 + bctrl /* Call handler */ + +syscall_exit: +#ifdef SHOW_SYSCALLS + std r3,GPR3(r1) + bl .do_show_syscall_exit + ld r3,GPR3(r1) +#endif + std r3,RESULT(r1) + ld r5,_CCR(r1) + li r10,-_LAST_ERRNO + cmpld r3,r10 + clrrdi r12,r1,THREAD_SHIFT + bge- syscall_error +syscall_error_cont: + + /* check for syscall tracing or audit */ + ld r9,TI_FLAGS(r12) + andi. r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP) + bne- syscall_exit_trace +syscall_exit_trace_cont: + + /* disable interrupts so current_thread_info()->flags can't change, + and so that we don't get interrupted after loading SRR0/1. */ + ld r8,_MSR(r1) + andi. r10,r8,MSR_RI + beq- unrecov_restore + mfmsr r10 + rldicl r10,r10,48,1 + rotldi r10,r10,16 + mtmsrd r10,1 + ld r9,TI_FLAGS(r12) + andi. r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SIGPENDING|_TIF_NEED_RESCHED) + bne- syscall_exit_work + ld r7,_NIP(r1) + stdcx. r0,0,r1 /* to clear the reservation */ + andi. r6,r8,MSR_PR + ld r4,_LINK(r1) + beq- 1f /* only restore r13 if */ + ld r13,GPR13(r1) /* returning to usermode */ +1: ld r2,GPR2(r1) + li r12,MSR_RI + andc r10,r10,r12 + mtmsrd r10,1 /* clear MSR.RI */ + ld r1,GPR1(r1) + mtlr r4 + mtcr r5 + mtspr SPRN_SRR0,r7 + mtspr SPRN_SRR1,r8 + rfid + b . /* prevent speculative execution */ + +syscall_enosys: + li r3,-ENOSYS + std r3,RESULT(r1) + clrrdi r12,r1,THREAD_SHIFT + ld r5,_CCR(r1) + +syscall_error: + lbz r11,TI_SC_NOERR(r12) + cmpwi 0,r11,0 + bne- syscall_error_cont + neg r3,r3 + oris r5,r5,0x1000 /* Set SO bit in CR */ + std r5,_CCR(r1) + b syscall_error_cont + +/* Traced system call support */ +syscall_dotrace: + bl .save_nvgprs + addi r3,r1,STACK_FRAME_OVERHEAD + bl .do_syscall_trace_enter + ld r0,GPR0(r1) /* Restore original registers */ + ld r3,GPR3(r1) + ld r4,GPR4(r1) + ld r5,GPR5(r1) + ld r6,GPR6(r1) + ld r7,GPR7(r1) + ld r8,GPR8(r1) + addi r9,r1,STACK_FRAME_OVERHEAD + clrrdi r10,r1,THREAD_SHIFT + ld r10,TI_FLAGS(r10) + b syscall_dotrace_cont + +syscall_exit_trace: + std r3,GPR3(r1) + bl .save_nvgprs + addi r3,r1,STACK_FRAME_OVERHEAD + bl .do_syscall_trace_leave + REST_NVGPRS(r1) + ld r3,GPR3(r1) + ld r5,_CCR(r1) + clrrdi r12,r1,THREAD_SHIFT + b syscall_exit_trace_cont + +/* Stuff to do on exit from a system call. */ +syscall_exit_work: + std r3,GPR3(r1) + std r5,_CCR(r1) + b .ret_from_except_lite + +/* Save non-volatile GPRs, if not already saved. */ +_GLOBAL(save_nvgprs) + ld r11,_TRAP(r1) + andi. r0,r11,1 + beqlr- + SAVE_NVGPRS(r1) + clrrdi r0,r11,1 + std r0,_TRAP(r1) + blr + +/* + * The sigsuspend and rt_sigsuspend system calls can call do_signal + * and thus put the process into the stopped state where we might + * want to examine its user state with ptrace. Therefore we need + * to save all the nonvolatile registers (r14 - r31) before calling + * the C code. Similarly, fork, vfork and clone need the full + * register state on the stack so that it can be copied to the child. + */ +_GLOBAL(ppc32_sigsuspend) + bl .save_nvgprs + bl .sys32_sigsuspend + b 70f + +_GLOBAL(ppc64_rt_sigsuspend) + bl .save_nvgprs + bl .sys_rt_sigsuspend + b 70f + +_GLOBAL(ppc32_rt_sigsuspend) + bl .save_nvgprs + bl .sys32_rt_sigsuspend +70: cmpdi 0,r3,0 + /* If it returned an error, we need to return via syscall_exit to set + the SO bit in cr0 and potentially stop for ptrace. */ + bne syscall_exit + /* If sigsuspend() returns zero, we are going into a signal handler. We + may need to call audit_syscall_exit() to mark the exit from sigsuspend() */ +#ifdef CONFIG_AUDIT + ld r3,PACACURRENT(r13) + ld r4,AUDITCONTEXT(r3) + cmpdi 0,r4,0 + beq .ret_from_except /* No audit_context: Leave immediately. */ + li r4, 2 /* AUDITSC_FAILURE */ + li r5,-4 /* It's always -EINTR */ + bl .audit_syscall_exit +#endif + b .ret_from_except + +_GLOBAL(ppc_fork) + bl .save_nvgprs + bl .sys_fork + b syscall_exit + +_GLOBAL(ppc_vfork) + bl .save_nvgprs + bl .sys_vfork + b syscall_exit + +_GLOBAL(ppc_clone) + bl .save_nvgprs + bl .sys_clone + b syscall_exit + +_GLOBAL(ppc32_swapcontext) + bl .save_nvgprs + bl .sys32_swapcontext + b 80f + +_GLOBAL(ppc64_swapcontext) + bl .save_nvgprs + bl .sys_swapcontext + b 80f + +_GLOBAL(ppc32_sigreturn) + bl .sys32_sigreturn + b 80f + +_GLOBAL(ppc32_rt_sigreturn) + bl .sys32_rt_sigreturn + b 80f + +_GLOBAL(ppc64_rt_sigreturn) + bl .sys_rt_sigreturn + +80: cmpdi 0,r3,0 + blt syscall_exit + clrrdi r4,r1,THREAD_SHIFT + ld r4,TI_FLAGS(r4) + andi. r4,r4,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP) + beq+ 81f + addi r3,r1,STACK_FRAME_OVERHEAD + bl .do_syscall_trace_leave +81: b .ret_from_except + +_GLOBAL(ret_from_fork) + bl .schedule_tail + REST_NVGPRS(r1) + li r3,0 + b syscall_exit + +/* + * This routine switches between two different tasks. The process + * state of one is saved on its kernel stack. Then the state + * of the other is restored from its kernel stack. The memory + * management hardware is updated to the second process's state. + * Finally, we can return to the second process, via ret_from_except. + * On entry, r3 points to the THREAD for the current task, r4 + * points to the THREAD for the new task. + * + * Note: there are two ways to get to the "going out" portion + * of this code; either by coming in via the entry (_switch) + * or via "fork" which must set up an environment equivalent + * to the "_switch" path. If you change this you'll have to change + * the fork code also. + * + * The code which creates the new task context is in 'copy_thread' + * in arch/ppc64/kernel/process.c + */ + .align 7 +_GLOBAL(_switch) + mflr r0 + std r0,16(r1) + stdu r1,-SWITCH_FRAME_SIZE(r1) + /* r3-r13 are caller saved -- Cort */ + SAVE_8GPRS(14, r1) + SAVE_10GPRS(22, r1) + mflr r20 /* Return to switch caller */ + mfmsr r22 + li r0, MSR_FP +#ifdef CONFIG_ALTIVEC +BEGIN_FTR_SECTION + oris r0,r0,MSR_VEC@h /* Disable altivec */ + mfspr r24,SPRN_VRSAVE /* save vrsave register value */ + std r24,THREAD_VRSAVE(r3) +END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC) +#endif /* CONFIG_ALTIVEC */ + and. r0,r0,r22 + beq+ 1f + andc r22,r22,r0 + mtmsrd r22 + isync +1: std r20,_NIP(r1) + mfcr r23 + std r23,_CCR(r1) + std r1,KSP(r3) /* Set old stack pointer */ + +#ifdef CONFIG_SMP + /* We need a sync somewhere here to make sure that if the + * previous task gets rescheduled on another CPU, it sees all + * stores it has performed on this one. + */ + sync +#endif /* CONFIG_SMP */ + + addi r6,r4,-THREAD /* Convert THREAD to 'current' */ + std r6,PACACURRENT(r13) /* Set new 'current' */ + + ld r8,KSP(r4) /* new stack pointer */ +BEGIN_FTR_SECTION + clrrdi r6,r8,28 /* get its ESID */ + clrrdi r9,r1,28 /* get current sp ESID */ + clrldi. r0,r6,2 /* is new ESID c00000000? */ + cmpd cr1,r6,r9 /* or is new ESID the same as current ESID? */ + cror eq,4*cr1+eq,eq + beq 2f /* if yes, don't slbie it */ + + /* Bolt in the new stack SLB entry */ + ld r7,KSP_VSID(r4) /* Get new stack's VSID */ + oris r0,r6,(SLB_ESID_V)@h + ori r0,r0,(SLB_NUM_BOLTED-1)@l + slbie r6 + slbie r6 /* Workaround POWER5 < DD2.1 issue */ + slbmte r7,r0 + isync + +2: +END_FTR_SECTION_IFSET(CPU_FTR_SLB) + clrrdi r7,r8,THREAD_SHIFT /* base of new stack */ + /* Note: this uses SWITCH_FRAME_SIZE rather than INT_FRAME_SIZE + because we don't need to leave the 288-byte ABI gap at the + top of the kernel stack. */ + addi r7,r7,THREAD_SIZE-SWITCH_FRAME_SIZE + + mr r1,r8 /* start using new stack pointer */ + std r7,PACAKSAVE(r13) + + ld r6,_CCR(r1) + mtcrf 0xFF,r6 + +#ifdef CONFIG_ALTIVEC +BEGIN_FTR_SECTION + ld r0,THREAD_VRSAVE(r4) + mtspr SPRN_VRSAVE,r0 /* if G4, restore VRSAVE reg */ +END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC) +#endif /* CONFIG_ALTIVEC */ + + /* r3-r13 are destroyed -- Cort */ + REST_8GPRS(14, r1) + REST_10GPRS(22, r1) + + /* convert old thread to its task_struct for return value */ + addi r3,r3,-THREAD + ld r7,_NIP(r1) /* Return to _switch caller in new task */ + mtlr r7 + addi r1,r1,SWITCH_FRAME_SIZE + blr + + .align 7 +_GLOBAL(ret_from_except) + ld r11,_TRAP(r1) + andi. r0,r11,1 + bne .ret_from_except_lite + REST_NVGPRS(r1) + +_GLOBAL(ret_from_except_lite) + /* + * Disable interrupts so that current_thread_info()->flags + * can't change between when we test it and when we return + * from the interrupt. + */ + mfmsr r10 /* Get current interrupt state */ + rldicl r9,r10,48,1 /* clear MSR_EE */ + rotldi r9,r9,16 + mtmsrd r9,1 /* Update machine state */ + +#ifdef CONFIG_PREEMPT + clrrdi r9,r1,THREAD_SHIFT /* current_thread_info() */ + li r0,_TIF_NEED_RESCHED /* bits to check */ + ld r3,_MSR(r1) + ld r4,TI_FLAGS(r9) + /* Move MSR_PR bit in r3 to _TIF_SIGPENDING position in r0 */ + rlwimi r0,r3,32+TIF_SIGPENDING-MSR_PR_LG,_TIF_SIGPENDING + and. r0,r4,r0 /* check NEED_RESCHED and maybe SIGPENDING */ + bne do_work + +#else /* !CONFIG_PREEMPT */ + ld r3,_MSR(r1) /* Returning to user mode? */ + andi. r3,r3,MSR_PR + beq restore /* if not, just restore regs and return */ + + /* Check current_thread_info()->flags */ + clrrdi r9,r1,THREAD_SHIFT + ld r4,TI_FLAGS(r9) + andi. r0,r4,_TIF_USER_WORK_MASK + bne do_work +#endif + +restore: +#ifdef CONFIG_PPC_ISERIES + ld r5,SOFTE(r1) + cmpdi 0,r5,0 + beq 4f + /* Check for pending interrupts (iSeries) */ + ld r3,PACALPPACA+LPPACAANYINT(r13) + cmpdi r3,0 + beq+ 4f /* skip do_IRQ if no interrupts */ + + li r3,0 + stb r3,PACAPROCENABLED(r13) /* ensure we are soft-disabled */ + ori r10,r10,MSR_EE + mtmsrd r10 /* hard-enable again */ + addi r3,r1,STACK_FRAME_OVERHEAD + bl .do_IRQ + b .ret_from_except_lite /* loop back and handle more */ + +4: stb r5,PACAPROCENABLED(r13) +#endif + + ld r3,_MSR(r1) + andi. r0,r3,MSR_RI + beq- unrecov_restore + + andi. r0,r3,MSR_PR + + /* + * r13 is our per cpu area, only restore it if we are returning to + * userspace + */ + beq 1f + REST_GPR(13, r1) +1: + ld r3,_CTR(r1) + ld r0,_LINK(r1) + mtctr r3 + mtlr r0 + ld r3,_XER(r1) + mtspr SPRN_XER,r3 + + REST_8GPRS(5, r1) + + stdcx. r0,0,r1 /* to clear the reservation */ + + mfmsr r0 + li r2, MSR_RI + andc r0,r0,r2 + mtmsrd r0,1 + + ld r0,_MSR(r1) + mtspr SPRN_SRR1,r0 + + ld r2,_CCR(r1) + mtcrf 0xFF,r2 + ld r2,_NIP(r1) + mtspr SPRN_SRR0,r2 + + ld r0,GPR0(r1) + ld r2,GPR2(r1) + ld r3,GPR3(r1) + ld r4,GPR4(r1) + ld r1,GPR1(r1) + + rfid + b . /* prevent speculative execution */ + +/* Note: this must change if we start using the TIF_NOTIFY_RESUME bit */ +do_work: +#ifdef CONFIG_PREEMPT + andi. r0,r3,MSR_PR /* Returning to user mode? */ + bne user_work + /* Check that preempt_count() == 0 and interrupts are enabled */ + lwz r8,TI_PREEMPT(r9) + cmpwi cr1,r8,0 +#ifdef CONFIG_PPC_ISERIES + ld r0,SOFTE(r1) + cmpdi r0,0 +#else + andi. r0,r3,MSR_EE +#endif + crandc eq,cr1*4+eq,eq + bne restore + /* here we are preempting the current task */ +1: +#ifdef CONFIG_PPC_ISERIES + li r0,1 + stb r0,PACAPROCENABLED(r13) +#endif + ori r10,r10,MSR_EE + mtmsrd r10,1 /* reenable interrupts */ + bl .preempt_schedule + mfmsr r10 + clrrdi r9,r1,THREAD_SHIFT + rldicl r10,r10,48,1 /* disable interrupts again */ + rotldi r10,r10,16 + mtmsrd r10,1 + ld r4,TI_FLAGS(r9) + andi. r0,r4,_TIF_NEED_RESCHED + bne 1b + b restore + +user_work: +#endif + /* Enable interrupts */ + ori r10,r10,MSR_EE + mtmsrd r10,1 + + andi. r0,r4,_TIF_NEED_RESCHED + beq 1f + bl .schedule + b .ret_from_except_lite + +1: bl .save_nvgprs + li r3,0 + addi r4,r1,STACK_FRAME_OVERHEAD + bl .do_signal + b .ret_from_except + +unrecov_restore: + addi r3,r1,STACK_FRAME_OVERHEAD + bl .unrecoverable_exception + b unrecov_restore + +#ifdef CONFIG_PPC_RTAS +/* + * On CHRP, the Run-Time Abstraction Services (RTAS) have to be + * called with the MMU off. + * + * In addition, we need to be in 32b mode, at least for now. + * + * Note: r3 is an input parameter to rtas, so don't trash it... + */ +_GLOBAL(enter_rtas) + mflr r0 + std r0,16(r1) + stdu r1,-RTAS_FRAME_SIZE(r1) /* Save SP and create stack space. */ + + /* Because RTAS is running in 32b mode, it clobbers the high order half + * of all registers that it saves. We therefore save those registers + * RTAS might touch to the stack. (r0, r3-r13 are caller saved) + */ + SAVE_GPR(2, r1) /* Save the TOC */ + SAVE_GPR(13, r1) /* Save paca */ + SAVE_8GPRS(14, r1) /* Save the non-volatiles */ + SAVE_10GPRS(22, r1) /* ditto */ + + mfcr r4 + std r4,_CCR(r1) + mfctr r5 + std r5,_CTR(r1) + mfspr r6,SPRN_XER + std r6,_XER(r1) + mfdar r7 + std r7,_DAR(r1) + mfdsisr r8 + std r8,_DSISR(r1) + mfsrr0 r9 + std r9,_SRR0(r1) + mfsrr1 r10 + std r10,_SRR1(r1) + + /* There is no way it is acceptable to get here with interrupts enabled, + * check it with the asm equivalent of WARN_ON + */ + mfmsr r6 + andi. r0,r6,MSR_EE +1: tdnei r0,0 +.section __bug_table,"a" + .llong 1b,__LINE__ + 0x1000000, 1f, 2f +.previous +.section .rodata,"a" +1: .asciz __FILE__ +2: .asciz "enter_rtas" +.previous + + /* Unfortunately, the stack pointer and the MSR are also clobbered, + * so they are saved in the PACA which allows us to restore + * our original state after RTAS returns. + */ + std r1,PACAR1(r13) + std r6,PACASAVEDMSR(r13) + + /* Setup our real return addr */ + SET_REG_TO_LABEL(r4,.rtas_return_loc) + SET_REG_TO_CONST(r9,KERNELBASE) + sub r4,r4,r9 + mtlr r4 + + li r0,0 + ori r0,r0,MSR_EE|MSR_SE|MSR_BE|MSR_RI + andc r0,r6,r0 + + li r9,1 + rldicr r9,r9,MSR_SF_LG,(63-MSR_SF_LG) + ori r9,r9,MSR_IR|MSR_DR|MSR_FE0|MSR_FE1|MSR_FP + andc r6,r0,r9 + ori r6,r6,MSR_RI + sync /* disable interrupts so SRR0/1 */ + mtmsrd r0 /* don't get trashed */ + + SET_REG_TO_LABEL(r4,rtas) + ld r5,RTASENTRY(r4) /* get the rtas->entry value */ + ld r4,RTASBASE(r4) /* get the rtas->base value */ + + mtspr SPRN_SRR0,r5 + mtspr SPRN_SRR1,r6 + rfid + b . /* prevent speculative execution */ + +_STATIC(rtas_return_loc) + /* relocation is off at this point */ + mfspr r4,SPRN_SPRG3 /* Get PACA */ + SET_REG_TO_CONST(r5, KERNELBASE) + sub r4,r4,r5 /* RELOC the PACA base pointer */ + + mfmsr r6 + li r0,MSR_RI + andc r6,r6,r0 + sync + mtmsrd r6 + + ld r1,PACAR1(r4) /* Restore our SP */ + LOADADDR(r3,.rtas_restore_regs) + ld r4,PACASAVEDMSR(r4) /* Restore our MSR */ + + mtspr SPRN_SRR0,r3 + mtspr SPRN_SRR1,r4 + rfid + b . /* prevent speculative execution */ + +_STATIC(rtas_restore_regs) + /* relocation is on at this point */ + REST_GPR(2, r1) /* Restore the TOC */ + REST_GPR(13, r1) /* Restore paca */ + REST_8GPRS(14, r1) /* Restore the non-volatiles */ + REST_10GPRS(22, r1) /* ditto */ + + mfspr r13,SPRN_SPRG3 + + ld r4,_CCR(r1) + mtcr r4 + ld r5,_CTR(r1) + mtctr r5 + ld r6,_XER(r1) + mtspr SPRN_XER,r6 + ld r7,_DAR(r1) + mtdar r7 + ld r8,_DSISR(r1) + mtdsisr r8 + ld r9,_SRR0(r1) + mtsrr0 r9 + ld r10,_SRR1(r1) + mtsrr1 r10 + + addi r1,r1,RTAS_FRAME_SIZE /* Unstack our frame */ + ld r0,16(r1) /* get return address */ + + mtlr r0 + blr /* return to caller */ + +#endif /* CONFIG_PPC_RTAS */ + +#ifdef CONFIG_PPC_MULTIPLATFORM + +_GLOBAL(enter_prom) + mflr r0 + std r0,16(r1) + stdu r1,-PROM_FRAME_SIZE(r1) /* Save SP and create stack space */ + + /* Because PROM is running in 32b mode, it clobbers the high order half + * of all registers that it saves. We therefore save those registers + * PROM might touch to the stack. (r0, r3-r13 are caller saved) + */ + SAVE_8GPRS(2, r1) + SAVE_GPR(13, r1) + SAVE_8GPRS(14, r1) + SAVE_10GPRS(22, r1) + mfcr r4 + std r4,_CCR(r1) + mfctr r5 + std r5,_CTR(r1) + mfspr r6,SPRN_XER + std r6,_XER(r1) + mfdar r7 + std r7,_DAR(r1) + mfdsisr r8 + std r8,_DSISR(r1) + mfsrr0 r9 + std r9,_SRR0(r1) + mfsrr1 r10 + std r10,_SRR1(r1) + mfmsr r11 + std r11,_MSR(r1) + + /* Get the PROM entrypoint */ + ld r0,GPR4(r1) + mtlr r0 + + /* Switch MSR to 32 bits mode + */ + mfmsr r11 + li r12,1 + rldicr r12,r12,MSR_SF_LG,(63-MSR_SF_LG) + andc r11,r11,r12 + li r12,1 + rldicr r12,r12,MSR_ISF_LG,(63-MSR_ISF_LG) + andc r11,r11,r12 + mtmsrd r11 + isync + + /* Restore arguments & enter PROM here... */ + ld r3,GPR3(r1) + blrl + + /* Just make sure that r1 top 32 bits didn't get + * corrupt by OF + */ + rldicl r1,r1,0,32 + + /* Restore the MSR (back to 64 bits) */ + ld r0,_MSR(r1) + mtmsrd r0 + isync + + /* Restore other registers */ + REST_GPR(2, r1) + REST_GPR(13, r1) + REST_8GPRS(14, r1) + REST_10GPRS(22, r1) + ld r4,_CCR(r1) + mtcr r4 + ld r5,_CTR(r1) + mtctr r5 + ld r6,_XER(r1) + mtspr SPRN_XER,r6 + ld r7,_DAR(r1) + mtdar r7 + ld r8,_DSISR(r1) + mtdsisr r8 + ld r9,_SRR0(r1) + mtsrr0 r9 + ld r10,_SRR1(r1) + mtsrr1 r10 + + addi r1,r1,PROM_FRAME_SIZE + ld r0,16(r1) + mtlr r0 + blr + +#endif /* CONFIG_PPC_MULTIPLATFORM */ diff --git a/arch/powerpc/kernel/misc_32.S b/arch/powerpc/kernel/misc_32.S new file mode 100644 index 000000000000..fa8c20ffec78 --- /dev/null +++ b/arch/powerpc/kernel/misc_32.S @@ -0,0 +1,1039 @@ +/* + * This file contains miscellaneous low-level functions. + * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) + * + * Largely rewritten by Cort Dougan (cort@cs.nmt.edu) + * and Paul Mackerras. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + + .text + + .align 5 +_GLOBAL(__delay) + cmpwi 0,r3,0 + mtctr r3 + beqlr +1: bdnz 1b + blr + +/* + * Returns (address we're running at) - (address we were linked at) + * for use before the text and data are mapped to KERNELBASE. + */ +_GLOBAL(reloc_offset) + mflr r0 + bl 1f +1: mflr r3 + lis r4,1b@ha + addi r4,r4,1b@l + subf r3,r4,r3 + mtlr r0 + blr + +/* + * add_reloc_offset(x) returns x + reloc_offset(). + */ +_GLOBAL(add_reloc_offset) + mflr r0 + bl 1f +1: mflr r5 + lis r4,1b@ha + addi r4,r4,1b@l + subf r5,r4,r5 + add r3,r3,r5 + mtlr r0 + blr + +/* + * sub_reloc_offset(x) returns x - reloc_offset(). + */ +_GLOBAL(sub_reloc_offset) + mflr r0 + bl 1f +1: mflr r5 + lis r4,1b@ha + addi r4,r4,1b@l + subf r5,r4,r5 + subf r3,r5,r3 + mtlr r0 + blr + +/* + * reloc_got2 runs through the .got2 section adding an offset + * to each entry. + */ +_GLOBAL(reloc_got2) + mflr r11 + lis r7,__got2_start@ha + addi r7,r7,__got2_start@l + lis r8,__got2_end@ha + addi r8,r8,__got2_end@l + subf r8,r7,r8 + srwi. r8,r8,2 + beqlr + mtctr r8 + bl 1f +1: mflr r0 + lis r4,1b@ha + addi r4,r4,1b@l + subf r0,r4,r0 + add r7,r0,r7 +2: lwz r0,0(r7) + add r0,r0,r3 + stw r0,0(r7) + addi r7,r7,4 + bdnz 2b + mtlr r11 + blr + +/* + * identify_cpu, + * called with r3 = data offset and r4 = CPU number + * doesn't change r3 + */ +_GLOBAL(identify_cpu) + addis r8,r3,cpu_specs@ha + addi r8,r8,cpu_specs@l + mfpvr r7 +1: + lwz r5,CPU_SPEC_PVR_MASK(r8) + and r5,r5,r7 + lwz r6,CPU_SPEC_PVR_VALUE(r8) + cmplw 0,r6,r5 + beq 1f + addi r8,r8,CPU_SPEC_ENTRY_SIZE + b 1b +1: + addis r6,r3,cur_cpu_spec@ha + addi r6,r6,cur_cpu_spec@l + sub r8,r8,r3 + stw r8,0(r6) + blr + +/* + * do_cpu_ftr_fixups - goes through the list of CPU feature fixups + * and writes nop's over sections of code that don't apply for this cpu. + * r3 = data offset (not changed) + */ +_GLOBAL(do_cpu_ftr_fixups) + /* Get CPU 0 features */ + addis r6,r3,cur_cpu_spec@ha + addi r6,r6,cur_cpu_spec@l + lwz r4,0(r6) + add r4,r4,r3 + lwz r4,CPU_SPEC_FEATURES(r4) + + /* Get the fixup table */ + addis r6,r3,__start___ftr_fixup@ha + addi r6,r6,__start___ftr_fixup@l + addis r7,r3,__stop___ftr_fixup@ha + addi r7,r7,__stop___ftr_fixup@l + + /* Do the fixup */ +1: cmplw 0,r6,r7 + bgelr + addi r6,r6,16 + lwz r8,-16(r6) /* mask */ + and r8,r8,r4 + lwz r9,-12(r6) /* value */ + cmplw 0,r8,r9 + beq 1b + lwz r8,-8(r6) /* section begin */ + lwz r9,-4(r6) /* section end */ + subf. r9,r8,r9 + beq 1b + /* write nops over the section of code */ + /* todo: if large section, add a branch at the start of it */ + srwi r9,r9,2 + mtctr r9 + add r8,r8,r3 + lis r0,0x60000000@h /* nop */ +3: stw r0,0(r8) + andi. r10,r4,CPU_FTR_SPLIT_ID_CACHE@l + beq 2f + dcbst 0,r8 /* suboptimal, but simpler */ + sync + icbi 0,r8 +2: addi r8,r8,4 + bdnz 3b + sync /* additional sync needed on g4 */ + isync + b 1b + +/* + * call_setup_cpu - call the setup_cpu function for this cpu + * r3 = data offset, r24 = cpu number + * + * Setup function is called with: + * r3 = data offset + * r4 = ptr to CPU spec (relocated) + */ +_GLOBAL(call_setup_cpu) + addis r4,r3,cur_cpu_spec@ha + addi r4,r4,cur_cpu_spec@l + lwz r4,0(r4) + add r4,r4,r3 + lwz r5,CPU_SPEC_SETUP(r4) + cmpi 0,r5,0 + add r5,r5,r3 + beqlr + mtctr r5 + bctr + +#if defined(CONFIG_CPU_FREQ_PMAC) && defined(CONFIG_6xx) + +/* This gets called by via-pmu.c to switch the PLL selection + * on 750fx CPU. This function should really be moved to some + * other place (as most of the cpufreq code in via-pmu + */ +_GLOBAL(low_choose_750fx_pll) + /* Clear MSR:EE */ + mfmsr r7 + rlwinm r0,r7,0,17,15 + mtmsr r0 + + /* If switching to PLL1, disable HID0:BTIC */ + cmplwi cr0,r3,0 + beq 1f + mfspr r5,SPRN_HID0 + rlwinm r5,r5,0,27,25 + sync + mtspr SPRN_HID0,r5 + isync + sync + +1: + /* Calc new HID1 value */ + mfspr r4,SPRN_HID1 /* Build a HID1:PS bit from parameter */ + rlwinm r5,r3,16,15,15 /* Clear out HID1:PS from value read */ + rlwinm r4,r4,0,16,14 /* Could have I used rlwimi here ? */ + or r4,r4,r5 + mtspr SPRN_HID1,r4 + + /* Store new HID1 image */ + rlwinm r6,r1,0,0,18 + lwz r6,TI_CPU(r6) + slwi r6,r6,2 + addis r6,r6,nap_save_hid1@ha + stw r4,nap_save_hid1@l(r6) + + /* If switching to PLL0, enable HID0:BTIC */ + cmplwi cr0,r3,0 + bne 1f + mfspr r5,SPRN_HID0 + ori r5,r5,HID0_BTIC + sync + mtspr SPRN_HID0,r5 + isync + sync + +1: + /* Return */ + mtmsr r7 + blr + +_GLOBAL(low_choose_7447a_dfs) + /* Clear MSR:EE */ + mfmsr r7 + rlwinm r0,r7,0,17,15 + mtmsr r0 + + /* Calc new HID1 value */ + mfspr r4,SPRN_HID1 + insrwi r4,r3,1,9 /* insert parameter into bit 9 */ + sync + mtspr SPRN_HID1,r4 + sync + isync + + /* Return */ + mtmsr r7 + blr + +#endif /* CONFIG_CPU_FREQ_PMAC && CONFIG_6xx */ + +/* + * complement mask on the msr then "or" some values on. + * _nmask_and_or_msr(nmask, value_to_or) + */ +_GLOBAL(_nmask_and_or_msr) + mfmsr r0 /* Get current msr */ + andc r0,r0,r3 /* And off the bits set in r3 (first parm) */ + or r0,r0,r4 /* Or on the bits in r4 (second parm) */ + SYNC /* Some chip revs have problems here... */ + mtmsr r0 /* Update machine state */ + isync + blr /* Done */ + + +/* + * Flush MMU TLB + */ +_GLOBAL(_tlbia) +#if defined(CONFIG_40x) + sync /* Flush to memory before changing mapping */ + tlbia + isync /* Flush shadow TLB */ +#elif defined(CONFIG_44x) + li r3,0 + sync + + /* Load high watermark */ + lis r4,tlb_44x_hwater@ha + lwz r5,tlb_44x_hwater@l(r4) + +1: tlbwe r3,r3,PPC44x_TLB_PAGEID + addi r3,r3,1 + cmpw 0,r3,r5 + ble 1b + + isync +#elif defined(CONFIG_FSL_BOOKE) + /* Invalidate all entries in TLB0 */ + li r3, 0x04 + tlbivax 0,3 + /* Invalidate all entries in TLB1 */ + li r3, 0x0c + tlbivax 0,3 + /* Invalidate all entries in TLB2 */ + li r3, 0x14 + tlbivax 0,3 + /* Invalidate all entries in TLB3 */ + li r3, 0x1c + tlbivax 0,3 + msync +#ifdef CONFIG_SMP + tlbsync +#endif /* CONFIG_SMP */ +#else /* !(CONFIG_40x || CONFIG_44x || CONFIG_FSL_BOOKE) */ +#if defined(CONFIG_SMP) + rlwinm r8,r1,0,0,18 + lwz r8,TI_CPU(r8) + oris r8,r8,10 + mfmsr r10 + SYNC + rlwinm r0,r10,0,17,15 /* clear bit 16 (MSR_EE) */ + rlwinm r0,r0,0,28,26 /* clear DR */ + mtmsr r0 + SYNC_601 + isync + lis r9,mmu_hash_lock@h + ori r9,r9,mmu_hash_lock@l + tophys(r9,r9) +10: lwarx r7,0,r9 + cmpwi 0,r7,0 + bne- 10b + stwcx. r8,0,r9 + bne- 10b + sync + tlbia + sync + TLBSYNC + li r0,0 + stw r0,0(r9) /* clear mmu_hash_lock */ + mtmsr r10 + SYNC_601 + isync +#else /* CONFIG_SMP */ + sync + tlbia + sync +#endif /* CONFIG_SMP */ +#endif /* ! defined(CONFIG_40x) */ + blr + +/* + * Flush MMU TLB for a particular address + */ +_GLOBAL(_tlbie) +#if defined(CONFIG_40x) + tlbsx. r3, 0, r3 + bne 10f + sync + /* There are only 64 TLB entries, so r3 < 64, which means bit 25 is clear. + * Since 25 is the V bit in the TLB_TAG, loading this value will invalidate + * the TLB entry. */ + tlbwe r3, r3, TLB_TAG + isync +10: +#elif defined(CONFIG_44x) + mfspr r4,SPRN_MMUCR + mfspr r5,SPRN_PID /* Get PID */ + rlwimi r4,r5,0,24,31 /* Set TID */ + mtspr SPRN_MMUCR,r4 + + tlbsx. r3, 0, r3 + bne 10f + sync + /* There are only 64 TLB entries, so r3 < 64, + * which means bit 22, is clear. Since 22 is + * the V bit in the TLB_PAGEID, loading this + * value will invalidate the TLB entry. + */ + tlbwe r3, r3, PPC44x_TLB_PAGEID + isync +10: +#elif defined(CONFIG_FSL_BOOKE) + rlwinm r4, r3, 0, 0, 19 + ori r5, r4, 0x08 /* TLBSEL = 1 */ + ori r6, r4, 0x10 /* TLBSEL = 2 */ + ori r7, r4, 0x18 /* TLBSEL = 3 */ + tlbivax 0, r4 + tlbivax 0, r5 + tlbivax 0, r6 + tlbivax 0, r7 + msync +#if defined(CONFIG_SMP) + tlbsync +#endif /* CONFIG_SMP */ +#else /* !(CONFIG_40x || CONFIG_44x || CONFIG_FSL_BOOKE) */ +#if defined(CONFIG_SMP) + rlwinm r8,r1,0,0,18 + lwz r8,TI_CPU(r8) + oris r8,r8,11 + mfmsr r10 + SYNC + rlwinm r0,r10,0,17,15 /* clear bit 16 (MSR_EE) */ + rlwinm r0,r0,0,28,26 /* clear DR */ + mtmsr r0 + SYNC_601 + isync + lis r9,mmu_hash_lock@h + ori r9,r9,mmu_hash_lock@l + tophys(r9,r9) +10: lwarx r7,0,r9 + cmpwi 0,r7,0 + bne- 10b + stwcx. r8,0,r9 + bne- 10b + eieio + tlbie r3 + sync + TLBSYNC + li r0,0 + stw r0,0(r9) /* clear mmu_hash_lock */ + mtmsr r10 + SYNC_601 + isync +#else /* CONFIG_SMP */ + tlbie r3 + sync +#endif /* CONFIG_SMP */ +#endif /* ! CONFIG_40x */ + blr + +/* + * Flush instruction cache. + * This is a no-op on the 601. + */ +_GLOBAL(flush_instruction_cache) +#if defined(CONFIG_8xx) + isync + lis r5, IDC_INVALL@h + mtspr SPRN_IC_CST, r5 +#elif defined(CONFIG_4xx) +#ifdef CONFIG_403GCX + li r3, 512 + mtctr r3 + lis r4, KERNELBASE@h +1: iccci 0, r4 + addi r4, r4, 16 + bdnz 1b +#else + lis r3, KERNELBASE@h + iccci 0,r3 +#endif +#elif CONFIG_FSL_BOOKE +BEGIN_FTR_SECTION + mfspr r3,SPRN_L1CSR0 + ori r3,r3,L1CSR0_CFI|L1CSR0_CLFC + /* msync; isync recommended here */ + mtspr SPRN_L1CSR0,r3 + isync + blr +END_FTR_SECTION_IFCLR(CPU_FTR_SPLIT_ID_CACHE) + mfspr r3,SPRN_L1CSR1 + ori r3,r3,L1CSR1_ICFI|L1CSR1_ICLFR + mtspr SPRN_L1CSR1,r3 +#else + mfspr r3,SPRN_PVR + rlwinm r3,r3,16,16,31 + cmpwi 0,r3,1 + beqlr /* for 601, do nothing */ + /* 603/604 processor - use invalidate-all bit in HID0 */ + mfspr r3,SPRN_HID0 + ori r3,r3,HID0_ICFI + mtspr SPRN_HID0,r3 +#endif /* CONFIG_8xx/4xx */ + isync + blr + +/* + * Write any modified data cache blocks out to memory + * and invalidate the corresponding instruction cache blocks. + * This is a no-op on the 601. + * + * flush_icache_range(unsigned long start, unsigned long stop) + */ +_GLOBAL(flush_icache_range) +BEGIN_FTR_SECTION + blr /* for 601, do nothing */ +END_FTR_SECTION_IFCLR(CPU_FTR_SPLIT_ID_CACHE) + li r5,L1_CACHE_LINE_SIZE-1 + andc r3,r3,r5 + subf r4,r3,r4 + add r4,r4,r5 + srwi. r4,r4,LG_L1_CACHE_LINE_SIZE + beqlr + mtctr r4 + mr r6,r3 +1: dcbst 0,r3 + addi r3,r3,L1_CACHE_LINE_SIZE + bdnz 1b + sync /* wait for dcbst's to get to ram */ + mtctr r4 +2: icbi 0,r6 + addi r6,r6,L1_CACHE_LINE_SIZE + bdnz 2b + sync /* additional sync needed on g4 */ + isync + blr +/* + * Write any modified data cache blocks out to memory. + * Does not invalidate the corresponding cache lines (especially for + * any corresponding instruction cache). + * + * clean_dcache_range(unsigned long start, unsigned long stop) + */ +_GLOBAL(clean_dcache_range) + li r5,L1_CACHE_LINE_SIZE-1 + andc r3,r3,r5 + subf r4,r3,r4 + add r4,r4,r5 + srwi. r4,r4,LG_L1_CACHE_LINE_SIZE + beqlr + mtctr r4 + +1: dcbst 0,r3 + addi r3,r3,L1_CACHE_LINE_SIZE + bdnz 1b + sync /* wait for dcbst's to get to ram */ + blr + +/* + * Write any modified data cache blocks out to memory and invalidate them. + * Does not invalidate the corresponding instruction cache blocks. + * + * flush_dcache_range(unsigned long start, unsigned long stop) + */ +_GLOBAL(flush_dcache_range) + li r5,L1_CACHE_LINE_SIZE-1 + andc r3,r3,r5 + subf r4,r3,r4 + add r4,r4,r5 + srwi. r4,r4,LG_L1_CACHE_LINE_SIZE + beqlr + mtctr r4 + +1: dcbf 0,r3 + addi r3,r3,L1_CACHE_LINE_SIZE + bdnz 1b + sync /* wait for dcbst's to get to ram */ + blr + +/* + * Like above, but invalidate the D-cache. This is used by the 8xx + * to invalidate the cache so the PPC core doesn't get stale data + * from the CPM (no cache snooping here :-). + * + * invalidate_dcache_range(unsigned long start, unsigned long stop) + */ +_GLOBAL(invalidate_dcache_range) + li r5,L1_CACHE_LINE_SIZE-1 + andc r3,r3,r5 + subf r4,r3,r4 + add r4,r4,r5 + srwi. r4,r4,LG_L1_CACHE_LINE_SIZE + beqlr + mtctr r4 + +1: dcbi 0,r3 + addi r3,r3,L1_CACHE_LINE_SIZE + bdnz 1b + sync /* wait for dcbi's to get to ram */ + blr + +#ifdef CONFIG_NOT_COHERENT_CACHE +/* + * 40x cores have 8K or 16K dcache and 32 byte line size. + * 44x has a 32K dcache and 32 byte line size. + * 8xx has 1, 2, 4, 8K variants. + * For now, cover the worst case of the 44x. + * Must be called with external interrupts disabled. + */ +#define CACHE_NWAYS 64 +#define CACHE_NLINES 16 + +_GLOBAL(flush_dcache_all) + li r4, (2 * CACHE_NWAYS * CACHE_NLINES) + mtctr r4 + lis r5, KERNELBASE@h +1: lwz r3, 0(r5) /* Load one word from every line */ + addi r5, r5, L1_CACHE_LINE_SIZE + bdnz 1b + blr +#endif /* CONFIG_NOT_COHERENT_CACHE */ + +/* + * Flush a particular page from the data cache to RAM. + * Note: this is necessary because the instruction cache does *not* + * snoop from the data cache. + * This is a no-op on the 601 which has a unified cache. + * + * void __flush_dcache_icache(void *page) + */ +_GLOBAL(__flush_dcache_icache) +BEGIN_FTR_SECTION + blr /* for 601, do nothing */ +END_FTR_SECTION_IFCLR(CPU_FTR_SPLIT_ID_CACHE) + rlwinm r3,r3,0,0,19 /* Get page base address */ + li r4,4096/L1_CACHE_LINE_SIZE /* Number of lines in a page */ + mtctr r4 + mr r6,r3 +0: dcbst 0,r3 /* Write line to ram */ + addi r3,r3,L1_CACHE_LINE_SIZE + bdnz 0b + sync + mtctr r4 +1: icbi 0,r6 + addi r6,r6,L1_CACHE_LINE_SIZE + bdnz 1b + sync + isync + blr + +/* + * Flush a particular page from the data cache to RAM, identified + * by its physical address. We turn off the MMU so we can just use + * the physical address (this may be a highmem page without a kernel + * mapping). + * + * void __flush_dcache_icache_phys(unsigned long physaddr) + */ +_GLOBAL(__flush_dcache_icache_phys) +BEGIN_FTR_SECTION + blr /* for 601, do nothing */ +END_FTR_SECTION_IFCLR(CPU_FTR_SPLIT_ID_CACHE) + mfmsr r10 + rlwinm r0,r10,0,28,26 /* clear DR */ + mtmsr r0 + isync + rlwinm r3,r3,0,0,19 /* Get page base address */ + li r4,4096/L1_CACHE_LINE_SIZE /* Number of lines in a page */ + mtctr r4 + mr r6,r3 +0: dcbst 0,r3 /* Write line to ram */ + addi r3,r3,L1_CACHE_LINE_SIZE + bdnz 0b + sync + mtctr r4 +1: icbi 0,r6 + addi r6,r6,L1_CACHE_LINE_SIZE + bdnz 1b + sync + mtmsr r10 /* restore DR */ + isync + blr + +/* + * Clear pages using the dcbz instruction, which doesn't cause any + * memory traffic (except to write out any cache lines which get + * displaced). This only works on cacheable memory. + * + * void clear_pages(void *page, int order) ; + */ +_GLOBAL(clear_pages) + li r0,4096/L1_CACHE_LINE_SIZE + slw r0,r0,r4 + mtctr r0 +#ifdef CONFIG_8xx + li r4, 0 +1: stw r4, 0(r3) + stw r4, 4(r3) + stw r4, 8(r3) + stw r4, 12(r3) +#else +1: dcbz 0,r3 +#endif + addi r3,r3,L1_CACHE_LINE_SIZE + bdnz 1b + blr + +/* + * Copy a whole page. We use the dcbz instruction on the destination + * to reduce memory traffic (it eliminates the unnecessary reads of + * the destination into cache). This requires that the destination + * is cacheable. + */ +#define COPY_16_BYTES \ + lwz r6,4(r4); \ + lwz r7,8(r4); \ + lwz r8,12(r4); \ + lwzu r9,16(r4); \ + stw r6,4(r3); \ + stw r7,8(r3); \ + stw r8,12(r3); \ + stwu r9,16(r3) + +_GLOBAL(copy_page) + addi r3,r3,-4 + addi r4,r4,-4 + +#ifdef CONFIG_8xx + /* don't use prefetch on 8xx */ + li r0,4096/L1_CACHE_LINE_SIZE + mtctr r0 +1: COPY_16_BYTES + bdnz 1b + blr + +#else /* not 8xx, we can prefetch */ + li r5,4 + +#if MAX_COPY_PREFETCH > 1 + li r0,MAX_COPY_PREFETCH + li r11,4 + mtctr r0 +11: dcbt r11,r4 + addi r11,r11,L1_CACHE_LINE_SIZE + bdnz 11b +#else /* MAX_COPY_PREFETCH == 1 */ + dcbt r5,r4 + li r11,L1_CACHE_LINE_SIZE+4 +#endif /* MAX_COPY_PREFETCH */ + li r0,4096/L1_CACHE_LINE_SIZE - MAX_COPY_PREFETCH + crclr 4*cr0+eq +2: + mtctr r0 +1: + dcbt r11,r4 + dcbz r5,r3 + COPY_16_BYTES +#if L1_CACHE_LINE_SIZE >= 32 + COPY_16_BYTES +#if L1_CACHE_LINE_SIZE >= 64 + COPY_16_BYTES + COPY_16_BYTES +#if L1_CACHE_LINE_SIZE >= 128 + COPY_16_BYTES + COPY_16_BYTES + COPY_16_BYTES + COPY_16_BYTES +#endif +#endif +#endif + bdnz 1b + beqlr + crnot 4*cr0+eq,4*cr0+eq + li r0,MAX_COPY_PREFETCH + li r11,4 + b 2b +#endif /* CONFIG_8xx */ + +/* + * void atomic_clear_mask(atomic_t mask, atomic_t *addr) + * void atomic_set_mask(atomic_t mask, atomic_t *addr); + */ +_GLOBAL(atomic_clear_mask) +10: lwarx r5,0,r4 + andc r5,r5,r3 + PPC405_ERR77(0,r4) + stwcx. r5,0,r4 + bne- 10b + blr +_GLOBAL(atomic_set_mask) +10: lwarx r5,0,r4 + or r5,r5,r3 + PPC405_ERR77(0,r4) + stwcx. r5,0,r4 + bne- 10b + blr + +/* + * I/O string operations + * + * insb(port, buf, len) + * outsb(port, buf, len) + * insw(port, buf, len) + * outsw(port, buf, len) + * insl(port, buf, len) + * outsl(port, buf, len) + * insw_ns(port, buf, len) + * outsw_ns(port, buf, len) + * insl_ns(port, buf, len) + * outsl_ns(port, buf, len) + * + * The *_ns versions don't do byte-swapping. + */ +_GLOBAL(_insb) + cmpwi 0,r5,0 + mtctr r5 + subi r4,r4,1 + blelr- +00: lbz r5,0(r3) + eieio + stbu r5,1(r4) + bdnz 00b + blr + +_GLOBAL(_outsb) + cmpwi 0,r5,0 + mtctr r5 + subi r4,r4,1 + blelr- +00: lbzu r5,1(r4) + stb r5,0(r3) + eieio + bdnz 00b + blr + +_GLOBAL(_insw) + cmpwi 0,r5,0 + mtctr r5 + subi r4,r4,2 + blelr- +00: lhbrx r5,0,r3 + eieio + sthu r5,2(r4) + bdnz 00b + blr + +_GLOBAL(_outsw) + cmpwi 0,r5,0 + mtctr r5 + subi r4,r4,2 + blelr- +00: lhzu r5,2(r4) + eieio + sthbrx r5,0,r3 + bdnz 00b + blr + +_GLOBAL(_insl) + cmpwi 0,r5,0 + mtctr r5 + subi r4,r4,4 + blelr- +00: lwbrx r5,0,r3 + eieio + stwu r5,4(r4) + bdnz 00b + blr + +_GLOBAL(_outsl) + cmpwi 0,r5,0 + mtctr r5 + subi r4,r4,4 + blelr- +00: lwzu r5,4(r4) + stwbrx r5,0,r3 + eieio + bdnz 00b + blr + +_GLOBAL(__ide_mm_insw) +_GLOBAL(_insw_ns) + cmpwi 0,r5,0 + mtctr r5 + subi r4,r4,2 + blelr- +00: lhz r5,0(r3) + eieio + sthu r5,2(r4) + bdnz 00b + blr + +_GLOBAL(__ide_mm_outsw) +_GLOBAL(_outsw_ns) + cmpwi 0,r5,0 + mtctr r5 + subi r4,r4,2 + blelr- +00: lhzu r5,2(r4) + sth r5,0(r3) + eieio + bdnz 00b + blr + +_GLOBAL(__ide_mm_insl) +_GLOBAL(_insl_ns) + cmpwi 0,r5,0 + mtctr r5 + subi r4,r4,4 + blelr- +00: lwz r5,0(r3) + eieio + stwu r5,4(r4) + bdnz 00b + blr + +_GLOBAL(__ide_mm_outsl) +_GLOBAL(_outsl_ns) + cmpwi 0,r5,0 + mtctr r5 + subi r4,r4,4 + blelr- +00: lwzu r5,4(r4) + stw r5,0(r3) + eieio + bdnz 00b + blr + +/* + * Extended precision shifts. + * + * Updated to be valid for shift counts from 0 to 63 inclusive. + * -- Gabriel + * + * R3/R4 has 64 bit value + * R5 has shift count + * result in R3/R4 + * + * ashrdi3: arithmetic right shift (sign propagation) + * lshrdi3: logical right shift + * ashldi3: left shift + */ +_GLOBAL(__ashrdi3) + subfic r6,r5,32 + srw r4,r4,r5 # LSW = count > 31 ? 0 : LSW >> count + addi r7,r5,32 # could be xori, or addi with -32 + slw r6,r3,r6 # t1 = count > 31 ? 0 : MSW << (32-count) + rlwinm r8,r7,0,32 # t3 = (count < 32) ? 32 : 0 + sraw r7,r3,r7 # t2 = MSW >> (count-32) + or r4,r4,r6 # LSW |= t1 + slw r7,r7,r8 # t2 = (count < 32) ? 0 : t2 + sraw r3,r3,r5 # MSW = MSW >> count + or r4,r4,r7 # LSW |= t2 + blr + +_GLOBAL(__ashldi3) + subfic r6,r5,32 + slw r3,r3,r5 # MSW = count > 31 ? 0 : MSW << count + addi r7,r5,32 # could be xori, or addi with -32 + srw r6,r4,r6 # t1 = count > 31 ? 0 : LSW >> (32-count) + slw r7,r4,r7 # t2 = count < 32 ? 0 : LSW << (count-32) + or r3,r3,r6 # MSW |= t1 + slw r4,r4,r5 # LSW = LSW << count + or r3,r3,r7 # MSW |= t2 + blr + +_GLOBAL(__lshrdi3) + subfic r6,r5,32 + srw r4,r4,r5 # LSW = count > 31 ? 0 : LSW >> count + addi r7,r5,32 # could be xori, or addi with -32 + slw r6,r3,r6 # t1 = count > 31 ? 0 : MSW << (32-count) + srw r7,r3,r7 # t2 = count < 32 ? 0 : MSW >> (count-32) + or r4,r4,r6 # LSW |= t1 + srw r3,r3,r5 # MSW = MSW >> count + or r4,r4,r7 # LSW |= t2 + blr + +_GLOBAL(abs) + srawi r4,r3,31 + xor r3,r3,r4 + sub r3,r3,r4 + blr + +_GLOBAL(_get_SP) + mr r3,r1 /* Close enough */ + blr + +/* + * These are used in the alignment trap handler when emulating + * single-precision loads and stores. + * We restore and save the fpscr so the task gets the same result + * and exceptions as if the cpu had performed the load or store. + */ + +#ifdef CONFIG_PPC_FPU +_GLOBAL(cvt_fd) + lfd 0,-4(r5) /* load up fpscr value */ + mtfsf 0xff,0 + lfs 0,0(r3) + stfd 0,0(r4) + mffs 0 /* save new fpscr value */ + stfd 0,-4(r5) + blr + +_GLOBAL(cvt_df) + lfd 0,-4(r5) /* load up fpscr value */ + mtfsf 0xff,0 + lfd 0,0(r3) + stfs 0,0(r4) + mffs 0 /* save new fpscr value */ + stfd 0,-4(r5) + blr +#endif + +/* + * Create a kernel thread + * kernel_thread(fn, arg, flags) + */ +_GLOBAL(kernel_thread) + stwu r1,-16(r1) + stw r30,8(r1) + stw r31,12(r1) + mr r30,r3 /* function */ + mr r31,r4 /* argument */ + ori r3,r5,CLONE_VM /* flags */ + oris r3,r3,CLONE_UNTRACED>>16 + li r4,0 /* new sp (unused) */ + li r0,__NR_clone + sc + cmpwi 0,r3,0 /* parent or child? */ + bne 1f /* return if parent */ + li r0,0 /* make top-level stack frame */ + stwu r0,-16(r1) + mtlr r30 /* fn addr in lr */ + mr r3,r31 /* load arg and call fn */ + PPC440EP_ERR42 + blrl + li r0,__NR_exit /* exit if function returns */ + li r3,0 + sc +1: lwz r30,8(r1) + lwz r31,12(r1) + addi r1,r1,16 + blr + +_GLOBAL(execve) + li r0,__NR_execve + sc + bnslr + neg r3,r3 + blr + +/* + * This routine is just here to keep GCC happy - sigh... + */ +_GLOBAL(__main) + blr diff --git a/arch/powerpc/kernel/misc_64.S b/arch/powerpc/kernel/misc_64.S new file mode 100644 index 000000000000..8fe295693c09 --- /dev/null +++ b/arch/powerpc/kernel/misc_64.S @@ -0,0 +1,898 @@ +/* + * arch/powerpc/kernel/misc64.S + * + * This file contains miscellaneous low-level functions. + * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) + * + * Largely rewritten by Cort Dougan (cort@cs.nmt.edu) + * and Paul Mackerras. + * Adapted for iSeries by Mike Corrigan (mikejc@us.ibm.com) + * PPC64 updates by Dave Engebretsen (engebret@us.ibm.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + + .text + +/* + * Returns (address we are running at) - (address we were linked at) + * for use before the text and data are mapped to KERNELBASE. + */ + +_GLOBAL(reloc_offset) + mflr r0 + bl 1f +1: mflr r3 + LOADADDR(r4,1b) + subf r3,r4,r3 + mtlr r0 + blr + +/* + * add_reloc_offset(x) returns x + reloc_offset(). + */ +_GLOBAL(add_reloc_offset) + mflr r0 + bl 1f +1: mflr r5 + LOADADDR(r4,1b) + subf r5,r4,r5 + add r3,r3,r5 + mtlr r0 + blr + +_GLOBAL(get_msr) + mfmsr r3 + blr + +_GLOBAL(get_dar) + mfdar r3 + blr + +_GLOBAL(get_srr0) + mfsrr0 r3 + blr + +_GLOBAL(get_srr1) + mfsrr1 r3 + blr + +_GLOBAL(get_sp) + mr r3,r1 + blr + +#ifdef CONFIG_IRQSTACKS +_GLOBAL(call_do_softirq) + mflr r0 + std r0,16(r1) + stdu r1,THREAD_SIZE-112(r3) + mr r1,r3 + bl .__do_softirq + ld r1,0(r1) + ld r0,16(r1) + mtlr r0 + blr + +_GLOBAL(call_handle_IRQ_event) + mflr r0 + std r0,16(r1) + stdu r1,THREAD_SIZE-112(r6) + mr r1,r6 + bl .handle_IRQ_event + ld r1,0(r1) + ld r0,16(r1) + mtlr r0 + blr +#endif /* CONFIG_IRQSTACKS */ + + /* + * To be called by C code which needs to do some operations with MMU + * disabled. Note that interrupts have to be disabled by the caller + * prior to calling us. The code called _MUST_ be in the RMO of course + * and part of the linear mapping as we don't attempt to translate the + * stack pointer at all. The function is called with the stack switched + * to this CPU emergency stack + * + * prototype is void *call_with_mmu_off(void *func, void *data); + * + * the called function is expected to be of the form + * + * void *called(void *data); + */ +_GLOBAL(call_with_mmu_off) + mflr r0 /* get link, save it on stackframe */ + std r0,16(r1) + mr r1,r5 /* save old stack ptr */ + ld r1,PACAEMERGSP(r13) /* get emerg. stack */ + subi r1,r1,STACK_FRAME_OVERHEAD + std r0,16(r1) /* save link on emerg. stack */ + std r5,0(r1) /* save old stack ptr in backchain */ + ld r3,0(r3) /* get to real function ptr (assume same TOC) */ + bl 2f /* we need LR to return, continue at label 2 */ + + ld r0,16(r1) /* we return here from the call, get LR and */ + ld r1,0(r1) /* .. old stack ptr */ + mtspr SPRN_SRR0,r0 /* and get back to virtual mode with these */ + mfmsr r4 + ori r4,r4,MSR_IR|MSR_DR + mtspr SPRN_SRR1,r4 + rfid + +2: mtspr SPRN_SRR0,r3 /* coming from above, enter real mode */ + mr r3,r4 /* get parameter */ + mfmsr r0 + ori r0,r0,MSR_IR|MSR_DR + xori r0,r0,MSR_IR|MSR_DR + mtspr SPRN_SRR1,r0 + rfid + + + .section ".toc","aw" +PPC64_CACHES: + .tc ppc64_caches[TC],ppc64_caches + .section ".text" + +/* + * Write any modified data cache blocks out to memory + * and invalidate the corresponding instruction cache blocks. + * + * flush_icache_range(unsigned long start, unsigned long stop) + * + * flush all bytes from start through stop-1 inclusive + */ + +_KPROBE(__flush_icache_range) + +/* + * Flush the data cache to memory + * + * Different systems have different cache line sizes + * and in some cases i-cache and d-cache line sizes differ from + * each other. + */ + ld r10,PPC64_CACHES@toc(r2) + lwz r7,DCACHEL1LINESIZE(r10)/* Get cache line size */ + addi r5,r7,-1 + andc r6,r3,r5 /* round low to line bdy */ + subf r8,r6,r4 /* compute length */ + add r8,r8,r5 /* ensure we get enough */ + lwz r9,DCACHEL1LOGLINESIZE(r10) /* Get log-2 of cache line size */ + srw. r8,r8,r9 /* compute line count */ + beqlr /* nothing to do? */ + mtctr r8 +1: dcbst 0,r6 + add r6,r6,r7 + bdnz 1b + sync + +/* Now invalidate the instruction cache */ + + lwz r7,ICACHEL1LINESIZE(r10) /* Get Icache line size */ + addi r5,r7,-1 + andc r6,r3,r5 /* round low to line bdy */ + subf r8,r6,r4 /* compute length */ + add r8,r8,r5 + lwz r9,ICACHEL1LOGLINESIZE(r10) /* Get log-2 of Icache line size */ + srw. r8,r8,r9 /* compute line count */ + beqlr /* nothing to do? */ + mtctr r8 +2: icbi 0,r6 + add r6,r6,r7 + bdnz 2b + isync + blr + .previous .text +/* + * Like above, but only do the D-cache. + * + * flush_dcache_range(unsigned long start, unsigned long stop) + * + * flush all bytes from start to stop-1 inclusive + */ +_GLOBAL(flush_dcache_range) + +/* + * Flush the data cache to memory + * + * Different systems have different cache line sizes + */ + ld r10,PPC64_CACHES@toc(r2) + lwz r7,DCACHEL1LINESIZE(r10) /* Get dcache line size */ + addi r5,r7,-1 + andc r6,r3,r5 /* round low to line bdy */ + subf r8,r6,r4 /* compute length */ + add r8,r8,r5 /* ensure we get enough */ + lwz r9,DCACHEL1LOGLINESIZE(r10) /* Get log-2 of dcache line size */ + srw. r8,r8,r9 /* compute line count */ + beqlr /* nothing to do? */ + mtctr r8 +0: dcbst 0,r6 + add r6,r6,r7 + bdnz 0b + sync + blr + +/* + * Like above, but works on non-mapped physical addresses. + * Use only for non-LPAR setups ! It also assumes real mode + * is cacheable. Used for flushing out the DART before using + * it as uncacheable memory + * + * flush_dcache_phys_range(unsigned long start, unsigned long stop) + * + * flush all bytes from start to stop-1 inclusive + */ +_GLOBAL(flush_dcache_phys_range) + ld r10,PPC64_CACHES@toc(r2) + lwz r7,DCACHEL1LINESIZE(r10) /* Get dcache line size */ + addi r5,r7,-1 + andc r6,r3,r5 /* round low to line bdy */ + subf r8,r6,r4 /* compute length */ + add r8,r8,r5 /* ensure we get enough */ + lwz r9,DCACHEL1LOGLINESIZE(r10) /* Get log-2 of dcache line size */ + srw. r8,r8,r9 /* compute line count */ + beqlr /* nothing to do? */ + mfmsr r5 /* Disable MMU Data Relocation */ + ori r0,r5,MSR_DR + xori r0,r0,MSR_DR + sync + mtmsr r0 + sync + isync + mtctr r8 +0: dcbst 0,r6 + add r6,r6,r7 + bdnz 0b + sync + isync + mtmsr r5 /* Re-enable MMU Data Relocation */ + sync + isync + blr + +_GLOBAL(flush_inval_dcache_range) + ld r10,PPC64_CACHES@toc(r2) + lwz r7,DCACHEL1LINESIZE(r10) /* Get dcache line size */ + addi r5,r7,-1 + andc r6,r3,r5 /* round low to line bdy */ + subf r8,r6,r4 /* compute length */ + add r8,r8,r5 /* ensure we get enough */ + lwz r9,DCACHEL1LOGLINESIZE(r10)/* Get log-2 of dcache line size */ + srw. r8,r8,r9 /* compute line count */ + beqlr /* nothing to do? */ + sync + isync + mtctr r8 +0: dcbf 0,r6 + add r6,r6,r7 + bdnz 0b + sync + isync + blr + + +/* + * Flush a particular page from the data cache to RAM. + * Note: this is necessary because the instruction cache does *not* + * snoop from the data cache. + * + * void __flush_dcache_icache(void *page) + */ +_GLOBAL(__flush_dcache_icache) +/* + * Flush the data cache to memory + * + * Different systems have different cache line sizes + */ + +/* Flush the dcache */ + ld r7,PPC64_CACHES@toc(r2) + clrrdi r3,r3,PAGE_SHIFT /* Page align */ + lwz r4,DCACHEL1LINESPERPAGE(r7) /* Get # dcache lines per page */ + lwz r5,DCACHEL1LINESIZE(r7) /* Get dcache line size */ + mr r6,r3 + mtctr r4 +0: dcbst 0,r6 + add r6,r6,r5 + bdnz 0b + sync + +/* Now invalidate the icache */ + + lwz r4,ICACHEL1LINESPERPAGE(r7) /* Get # icache lines per page */ + lwz r5,ICACHEL1LINESIZE(r7) /* Get icache line size */ + mtctr r4 +1: icbi 0,r3 + add r3,r3,r5 + bdnz 1b + isync + blr + +/* + * I/O string operations + * + * insb(port, buf, len) + * outsb(port, buf, len) + * insw(port, buf, len) + * outsw(port, buf, len) + * insl(port, buf, len) + * outsl(port, buf, len) + * insw_ns(port, buf, len) + * outsw_ns(port, buf, len) + * insl_ns(port, buf, len) + * outsl_ns(port, buf, len) + * + * The *_ns versions don't do byte-swapping. + */ +_GLOBAL(_insb) + cmpwi 0,r5,0 + mtctr r5 + subi r4,r4,1 + blelr- +00: lbz r5,0(r3) + eieio + stbu r5,1(r4) + bdnz 00b + twi 0,r5,0 + isync + blr + +_GLOBAL(_outsb) + cmpwi 0,r5,0 + mtctr r5 + subi r4,r4,1 + blelr- +00: lbzu r5,1(r4) + stb r5,0(r3) + bdnz 00b + sync + blr + +_GLOBAL(_insw) + cmpwi 0,r5,0 + mtctr r5 + subi r4,r4,2 + blelr- +00: lhbrx r5,0,r3 + eieio + sthu r5,2(r4) + bdnz 00b + twi 0,r5,0 + isync + blr + +_GLOBAL(_outsw) + cmpwi 0,r5,0 + mtctr r5 + subi r4,r4,2 + blelr- +00: lhzu r5,2(r4) + sthbrx r5,0,r3 + bdnz 00b + sync + blr + +_GLOBAL(_insl) + cmpwi 0,r5,0 + mtctr r5 + subi r4,r4,4 + blelr- +00: lwbrx r5,0,r3 + eieio + stwu r5,4(r4) + bdnz 00b + twi 0,r5,0 + isync + blr + +_GLOBAL(_outsl) + cmpwi 0,r5,0 + mtctr r5 + subi r4,r4,4 + blelr- +00: lwzu r5,4(r4) + stwbrx r5,0,r3 + bdnz 00b + sync + blr + +/* _GLOBAL(ide_insw) now in drivers/ide/ide-iops.c */ +_GLOBAL(_insw_ns) + cmpwi 0,r5,0 + mtctr r5 + subi r4,r4,2 + blelr- +00: lhz r5,0(r3) + eieio + sthu r5,2(r4) + bdnz 00b + twi 0,r5,0 + isync + blr + +/* _GLOBAL(ide_outsw) now in drivers/ide/ide-iops.c */ +_GLOBAL(_outsw_ns) + cmpwi 0,r5,0 + mtctr r5 + subi r4,r4,2 + blelr- +00: lhzu r5,2(r4) + sth r5,0(r3) + bdnz 00b + sync + blr + +_GLOBAL(_insl_ns) + cmpwi 0,r5,0 + mtctr r5 + subi r4,r4,4 + blelr- +00: lwz r5,0(r3) + eieio + stwu r5,4(r4) + bdnz 00b + twi 0,r5,0 + isync + blr + +_GLOBAL(_outsl_ns) + cmpwi 0,r5,0 + mtctr r5 + subi r4,r4,4 + blelr- +00: lwzu r5,4(r4) + stw r5,0(r3) + bdnz 00b + sync + blr + + +_GLOBAL(cvt_fd) + lfd 0,0(r5) /* load up fpscr value */ + mtfsf 0xff,0 + lfs 0,0(r3) + stfd 0,0(r4) + mffs 0 /* save new fpscr value */ + stfd 0,0(r5) + blr + +_GLOBAL(cvt_df) + lfd 0,0(r5) /* load up fpscr value */ + mtfsf 0xff,0 + lfd 0,0(r3) + stfs 0,0(r4) + mffs 0 /* save new fpscr value */ + stfd 0,0(r5) + blr + +/* + * identify_cpu and calls setup_cpu + * In: r3 = base of the cpu_specs array + * r4 = address of cur_cpu_spec + * r5 = relocation offset + */ +_GLOBAL(identify_cpu) + mfpvr r7 +1: + lwz r8,CPU_SPEC_PVR_MASK(r3) + and r8,r8,r7 + lwz r9,CPU_SPEC_PVR_VALUE(r3) + cmplw 0,r9,r8 + beq 1f + addi r3,r3,CPU_SPEC_ENTRY_SIZE + b 1b +1: + sub r0,r3,r5 + std r0,0(r4) + ld r4,CPU_SPEC_SETUP(r3) + add r4,r4,r5 + ld r4,0(r4) + add r4,r4,r5 + mtctr r4 + /* Calling convention for cpu setup is r3=offset, r4=cur_cpu_spec */ + mr r4,r3 + mr r3,r5 + bctr + +/* + * do_cpu_ftr_fixups - goes through the list of CPU feature fixups + * and writes nop's over sections of code that don't apply for this cpu. + * r3 = data offset (not changed) + */ +_GLOBAL(do_cpu_ftr_fixups) + /* Get CPU 0 features */ + LOADADDR(r6,cur_cpu_spec) + sub r6,r6,r3 + ld r4,0(r6) + sub r4,r4,r3 + ld r4,CPU_SPEC_FEATURES(r4) + /* Get the fixup table */ + LOADADDR(r6,__start___ftr_fixup) + sub r6,r6,r3 + LOADADDR(r7,__stop___ftr_fixup) + sub r7,r7,r3 + /* Do the fixup */ +1: cmpld r6,r7 + bgelr + addi r6,r6,32 + ld r8,-32(r6) /* mask */ + and r8,r8,r4 + ld r9,-24(r6) /* value */ + cmpld r8,r9 + beq 1b + ld r8,-16(r6) /* section begin */ + ld r9,-8(r6) /* section end */ + subf. r9,r8,r9 + beq 1b + /* write nops over the section of code */ + /* todo: if large section, add a branch at the start of it */ + srwi r9,r9,2 + mtctr r9 + sub r8,r8,r3 + lis r0,0x60000000@h /* nop */ +3: stw r0,0(r8) + andi. r10,r4,CPU_FTR_SPLIT_ID_CACHE@l + beq 2f + dcbst 0,r8 /* suboptimal, but simpler */ + sync + icbi 0,r8 +2: addi r8,r8,4 + bdnz 3b + sync /* additional sync needed on g4 */ + isync + b 1b + +#if defined(CONFIG_PPC_PMAC) || defined(CONFIG_PPC_MAPLE) +/* + * Do an IO access in real mode + */ +_GLOBAL(real_readb) + mfmsr r7 + ori r0,r7,MSR_DR + xori r0,r0,MSR_DR + sync + mtmsrd r0 + sync + isync + mfspr r6,SPRN_HID4 + rldicl r5,r6,32,0 + ori r5,r5,0x100 + rldicl r5,r5,32,0 + sync + mtspr SPRN_HID4,r5 + isync + slbia + isync + lbz r3,0(r3) + sync + mtspr SPRN_HID4,r6 + isync + slbia + isync + mtmsrd r7 + sync + isync + blr + + /* + * Do an IO access in real mode + */ +_GLOBAL(real_writeb) + mfmsr r7 + ori r0,r7,MSR_DR + xori r0,r0,MSR_DR + sync + mtmsrd r0 + sync + isync + mfspr r6,SPRN_HID4 + rldicl r5,r6,32,0 + ori r5,r5,0x100 + rldicl r5,r5,32,0 + sync + mtspr SPRN_HID4,r5 + isync + slbia + isync + stb r3,0(r4) + sync + mtspr SPRN_HID4,r6 + isync + slbia + isync + mtmsrd r7 + sync + isync + blr +#endif /* defined(CONFIG_PPC_PMAC) || defined(CONFIG_PPC_MAPLE) */ + +/* + * Create a kernel thread + * kernel_thread(fn, arg, flags) + */ +_GLOBAL(kernel_thread) + std r29,-24(r1) + std r30,-16(r1) + stdu r1,-STACK_FRAME_OVERHEAD(r1) + mr r29,r3 + mr r30,r4 + ori r3,r5,CLONE_VM /* flags */ + oris r3,r3,(CLONE_UNTRACED>>16) + li r4,0 /* new sp (unused) */ + li r0,__NR_clone + sc + cmpdi 0,r3,0 /* parent or child? */ + bne 1f /* return if parent */ + li r0,0 + stdu r0,-STACK_FRAME_OVERHEAD(r1) + ld r2,8(r29) + ld r29,0(r29) + mtlr r29 /* fn addr in lr */ + mr r3,r30 /* load arg and call fn */ + blrl + li r0,__NR_exit /* exit after child exits */ + li r3,0 + sc +1: addi r1,r1,STACK_FRAME_OVERHEAD + ld r29,-24(r1) + ld r30,-16(r1) + blr + +/* + * disable_kernel_fp() + * Disable the FPU. + */ +_GLOBAL(disable_kernel_fp) + mfmsr r3 + rldicl r0,r3,(63-MSR_FP_LG),1 + rldicl r3,r0,(MSR_FP_LG+1),0 + mtmsrd r3 /* disable use of fpu now */ + isync + blr + +#ifdef CONFIG_ALTIVEC + +#if 0 /* this has no callers for now */ +/* + * disable_kernel_altivec() + * Disable the VMX. + */ +_GLOBAL(disable_kernel_altivec) + mfmsr r3 + rldicl r0,r3,(63-MSR_VEC_LG),1 + rldicl r3,r0,(MSR_VEC_LG+1),0 + mtmsrd r3 /* disable use of VMX now */ + isync + blr +#endif /* 0 */ + +/* + * giveup_altivec(tsk) + * Disable VMX for the task given as the argument, + * and save the vector registers in its thread_struct. + * Enables the VMX for use in the kernel on return. + */ +_GLOBAL(giveup_altivec) + mfmsr r5 + oris r5,r5,MSR_VEC@h + mtmsrd r5 /* enable use of VMX now */ + isync + cmpdi 0,r3,0 + beqlr- /* if no previous owner, done */ + addi r3,r3,THREAD /* want THREAD of task */ + ld r5,PT_REGS(r3) + cmpdi 0,r5,0 + SAVE_32VRS(0,r4,r3) + mfvscr vr0 + li r4,THREAD_VSCR + stvx vr0,r4,r3 + beq 1f + ld r4,_MSR-STACK_FRAME_OVERHEAD(r5) + lis r3,MSR_VEC@h + andc r4,r4,r3 /* disable FP for previous task */ + std r4,_MSR-STACK_FRAME_OVERHEAD(r5) +1: +#ifndef CONFIG_SMP + li r5,0 + ld r4,last_task_used_altivec@got(r2) + std r5,0(r4) +#endif /* CONFIG_SMP */ + blr + +#endif /* CONFIG_ALTIVEC */ + +_GLOBAL(__setup_cpu_power3) + blr + +_GLOBAL(execve) + li r0,__NR_execve + sc + bnslr + neg r3,r3 + blr + +/* kexec_wait(phys_cpu) + * + * wait for the flag to change, indicating this kernel is going away but + * the slave code for the next one is at addresses 0 to 100. + * + * This is used by all slaves. + * + * Physical (hardware) cpu id should be in r3. + */ +_GLOBAL(kexec_wait) + bl 1f +1: mflr r5 + addi r5,r5,kexec_flag-1b + +99: HMT_LOW +#ifdef CONFIG_KEXEC /* use no memory without kexec */ + lwz r4,0(r5) + cmpwi 0,r4,0 + bnea 0x60 +#endif + b 99b + +/* this can be in text because we won't change it until we are + * running in real anyways + */ +kexec_flag: + .long 0 + + +#ifdef CONFIG_KEXEC + +/* kexec_smp_wait(void) + * + * call with interrupts off + * note: this is a terminal routine, it does not save lr + * + * get phys id from paca + * set paca id to -1 to say we got here + * switch to real mode + * join other cpus in kexec_wait(phys_id) + */ +_GLOBAL(kexec_smp_wait) + lhz r3,PACAHWCPUID(r13) + li r4,-1 + sth r4,PACAHWCPUID(r13) /* let others know we left */ + bl real_mode + b .kexec_wait + +/* + * switch to real mode (turn mmu off) + * we use the early kernel trick that the hardware ignores bits + * 0 and 1 (big endian) of the effective address in real mode + * + * don't overwrite r3 here, it is live for kexec_wait above. + */ +real_mode: /* assume normal blr return */ +1: li r9,MSR_RI + li r10,MSR_DR|MSR_IR + mflr r11 /* return address to SRR0 */ + mfmsr r12 + andc r9,r12,r9 + andc r10,r12,r10 + + mtmsrd r9,1 + mtspr SPRN_SRR1,r10 + mtspr SPRN_SRR0,r11 + rfid + + +/* + * kexec_sequence(newstack, start, image, control, clear_all()) + * + * does the grungy work with stack switching and real mode switches + * also does simple calls to other code + */ + +_GLOBAL(kexec_sequence) + mflr r0 + std r0,16(r1) + + /* switch stacks to newstack -- &kexec_stack.stack */ + stdu r1,THREAD_SIZE-112(r3) + mr r1,r3 + + li r0,0 + std r0,16(r1) + + /* save regs for local vars on new stack. + * yes, we won't go back, but ... + */ + std r31,-8(r1) + std r30,-16(r1) + std r29,-24(r1) + std r28,-32(r1) + std r27,-40(r1) + std r26,-48(r1) + std r25,-56(r1) + + stdu r1,-112-64(r1) + + /* save args into preserved regs */ + mr r31,r3 /* newstack (both) */ + mr r30,r4 /* start (real) */ + mr r29,r5 /* image (virt) */ + mr r28,r6 /* control, unused */ + mr r27,r7 /* clear_all() fn desc */ + mr r26,r8 /* spare */ + lhz r25,PACAHWCPUID(r13) /* get our phys cpu from paca */ + + /* disable interrupts, we are overwriting kernel data next */ + mfmsr r3 + rlwinm r3,r3,0,17,15 + mtmsrd r3,1 + + /* copy dest pages, flush whole dest image */ + mr r3,r29 + bl .kexec_copy_flush /* (image) */ + + /* turn off mmu */ + bl real_mode + + /* clear out hardware hash page table and tlb */ + ld r5,0(r27) /* deref function descriptor */ + mtctr r5 + bctrl /* ppc_md.hash_clear_all(void); */ + +/* + * kexec image calling is: + * the first 0x100 bytes of the entry point are copied to 0 + * + * all slaves branch to slave = 0x60 (absolute) + * slave(phys_cpu_id); + * + * master goes to start = entry point + * start(phys_cpu_id, start, 0); + * + * + * a wrapper is needed to call existing kernels, here is an approximate + * description of one method: + * + * v2: (2.6.10) + * start will be near the boot_block (maybe 0x100 bytes before it?) + * it will have a 0x60, which will b to boot_block, where it will wait + * and 0 will store phys into struct boot-block and load r3 from there, + * copy kernel 0-0x100 and tell slaves to back down to 0x60 again + * + * v1: (2.6.9) + * boot block will have all cpus scanning device tree to see if they + * are the boot cpu ????? + * other device tree differences (prop sizes, va vs pa, etc)... + */ + + /* copy 0x100 bytes starting at start to 0 */ + li r3,0 + mr r4,r30 + li r5,0x100 + li r6,0 + bl .copy_and_flush /* (dest, src, copy limit, start offset) */ +1: /* assume normal blr return */ + + /* release other cpus to the new kernel secondary start at 0x60 */ + mflr r5 + li r6,1 + stw r6,kexec_flag-1b(5) + mr r3,r25 # my phys cpu + mr r4,r30 # start, aka phys mem offset + mtlr 4 + li r5,0 + blr /* image->start(physid, image->start, 0); */ +#endif /* CONFIG_KEXEC */ diff --git a/arch/powerpc/kernel/systbl.S b/arch/powerpc/kernel/systbl.S new file mode 100644 index 000000000000..82d1fedb441c --- /dev/null +++ b/arch/powerpc/kernel/systbl.S @@ -0,0 +1,323 @@ +/* + * This file contains the table of syscall-handling functions. + * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) + * + * Largely rewritten by Cort Dougan (cort@cs.nmt.edu) + * and Paul Mackerras. + * + * Adapted for iSeries by Mike Corrigan (mikejc@us.ibm.com) + * PPC64 updates by Dave Engebretsen (engebret@us.ibm.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include +#include + +#ifdef CONFIG_PPC64 +#define SYSCALL(func) .llong .sys_##func,.sys_##func +#define SYSCALL32(func) .llong .sys_##func,.sys32_##func +#define COMPAT_SYS(func) .llong .sys_##func,.compat_sys_##func +#define PPC_SYS(func) .llong .ppc_##func,.ppc_##func +#define OLDSYS(func) .llong .sys_ni_syscall,.sys_ni_syscall +#define SYS32ONLY(func) .llong .sys_ni_syscall,.sys32_##func +#define SYSX(f, f3264, f32) .llong .f,.f3264 +#else +#define SYSCALL(func) .long sys_##func +#define SYSCALL32(func) .long sys_##func +#define COMPAT_SYS(func) .long sys_##func +#define PPC_SYS(func) .long ppc_##func +#define OLDSYS(func) .long sys_##func +#define SYS32ONLY(func) .long sys_##func +#define SYSX(f, f3264, f32) .long f32 +#endif + +#ifdef CONFIG_PPC64 +#define sys_sigpending sys_ni_syscall +#define sys_old_getrlimit sys_ni_syscall +#else +#define ppc_rtas sys_ni_syscall +#endif + +_GLOBAL(sys_call_table) +SYSCALL(restart_syscall) +SYSCALL(exit) +PPC_SYS(fork) +SYSCALL(read) +SYSCALL(write) +COMPAT_SYS(open) +SYSCALL(close) +SYSCALL32(waitpid) +SYSCALL32(creat) +SYSCALL(link) +SYSCALL(unlink) +SYSCALL32(execve) +SYSCALL(chdir) +SYSX(sys64_time,compat_sys_time,sys_time) +SYSCALL(mknod) +SYSCALL(chmod) +SYSCALL(lchown) +SYSCALL(ni_syscall) +OLDSYS(stat) +SYSX(sys_lseek,ppc32_lseek,sys_lseek) +SYSCALL(getpid) +COMPAT_SYS(mount) +SYSX(sys_ni_syscall,sys_oldumount,sys_oldumount) +SYSCALL(setuid) +SYSCALL(getuid) +COMPAT_SYS(stime) +SYSCALL32(ptrace) +SYSCALL(alarm) +OLDSYS(fstat) +SYSCALL32(pause) +COMPAT_SYS(utime) +SYSCALL(ni_syscall) +SYSCALL(ni_syscall) +SYSCALL32(access) +SYSCALL32(nice) +SYSCALL(ni_syscall) +SYSCALL(sync) +SYSCALL32(kill) +SYSCALL(rename) +SYSCALL32(mkdir) +SYSCALL(rmdir) +SYSCALL(dup) +SYSCALL(pipe) +COMPAT_SYS(times) +SYSCALL(ni_syscall) +SYSCALL(brk) +SYSCALL(setgid) +SYSCALL(getgid) +SYSCALL(signal) +SYSCALL(geteuid) +SYSCALL(getegid) +SYSCALL(acct) +SYSCALL(umount) +SYSCALL(ni_syscall) +COMPAT_SYS(ioctl) +COMPAT_SYS(fcntl) +SYSCALL(ni_syscall) +SYSCALL32(setpgid) +SYSCALL(ni_syscall) +SYS32ONLY(olduname) +SYSCALL32(umask) +SYSCALL(chroot) +SYSCALL(ustat) +SYSCALL(dup2) +SYSCALL(getppid) +SYSCALL(getpgrp) +SYSCALL(setsid) +SYS32ONLY(sigaction) +SYSCALL(sgetmask) +SYSCALL32(ssetmask) +SYSCALL(setreuid) +SYSCALL(setregid) +SYSX(sys_ni_syscall,ppc32_sigsuspend,ppc_sigsuspend) +COMPAT_SYS(sigpending) +SYSCALL32(sethostname) +COMPAT_SYS(setrlimit) +COMPAT_SYS(old_getrlimit) +COMPAT_SYS(getrusage) +SYSCALL32(gettimeofday) +SYSCALL32(settimeofday) +SYSCALL32(getgroups) +SYSCALL32(setgroups) +SYSX(sys_ni_syscall,sys_ni_syscall,ppc_select) +SYSCALL(symlink) +OLDSYS(lstat) +SYSCALL32(readlink) +SYSCALL(uselib) +SYSCALL(swapon) +SYSCALL(reboot) +SYSX(sys_ni_syscall,old32_readdir,old_readdir) +SYSCALL(mmap) +SYSCALL(munmap) +SYSCALL(truncate) +SYSCALL(ftruncate) +SYSCALL(fchmod) +SYSCALL(fchown) +SYSCALL32(getpriority) +SYSCALL32(setpriority) +SYSCALL(ni_syscall) +COMPAT_SYS(statfs) +COMPAT_SYS(fstatfs) +SYSCALL(ni_syscall) +COMPAT_SYS(socketcall) +SYSCALL32(syslog) +COMPAT_SYS(setitimer) +COMPAT_SYS(getitimer) +COMPAT_SYS(newstat) +COMPAT_SYS(newlstat) +COMPAT_SYS(newfstat) +SYSX(sys_ni_syscall,sys32_uname,sys_uname) +SYSCALL(ni_syscall) +SYSCALL(vhangup) +SYSCALL(ni_syscall) +SYSCALL(ni_syscall) +COMPAT_SYS(wait4) +SYSCALL(swapoff) +SYSCALL32(sysinfo) +SYSCALL32(ipc) +SYSCALL(fsync) +SYSX(sys_ni_syscall,ppc32_sigreturn,sys_sigreturn) +PPC_SYS(clone) +SYSCALL32(setdomainname) +SYSX(ppc64_newuname,ppc64_newuname,sys_newuname) +SYSCALL(ni_syscall) +SYSCALL32(adjtimex) +SYSCALL(mprotect) +SYSX(sys_ni_syscall,compat_sys_sigprocmask,sys_sigprocmask) +SYSCALL(ni_syscall) +SYSCALL(init_module) +SYSCALL(delete_module) +SYSCALL(ni_syscall) +SYSCALL(quotactl) +SYSCALL32(getpgid) +SYSCALL(fchdir) +SYSCALL(bdflush) +SYSCALL32(sysfs) +SYSX(ppc64_personality,ppc64_personality,sys_personality) +SYSCALL(ni_syscall) +SYSCALL(setfsuid) +SYSCALL(setfsgid) +SYSCALL(llseek) +SYSCALL32(getdents) +SYSX(sys_select,ppc32_select,ppc_select) +SYSCALL(flock) +SYSCALL(msync) +COMPAT_SYS(readv) +COMPAT_SYS(writev) +SYSCALL32(getsid) +SYSCALL(fdatasync) +SYSCALL32(sysctl) +SYSCALL(mlock) +SYSCALL(munlock) +SYSCALL(mlockall) +SYSCALL(munlockall) +SYSCALL32(sched_setparam) +SYSCALL32(sched_getparam) +SYSCALL32(sched_setscheduler) +SYSCALL32(sched_getscheduler) +SYSCALL(sched_yield) +SYSCALL32(sched_get_priority_max) +SYSCALL32(sched_get_priority_min) +SYSCALL32(sched_rr_get_interval) +COMPAT_SYS(nanosleep) +SYSCALL(mremap) +SYSCALL(setresuid) +SYSCALL(getresuid) +SYSCALL(ni_syscall) +SYSCALL(poll) +COMPAT_SYS(nfsservctl) +SYSCALL(setresgid) +SYSCALL(getresgid) +SYSCALL32(prctl) +SYSX(ppc64_rt_sigreturn,ppc32_rt_sigreturn,sys_rt_sigreturn) +SYSCALL32(rt_sigaction) +SYSCALL32(rt_sigprocmask) +SYSCALL32(rt_sigpending) +COMPAT_SYS(rt_sigtimedwait) +SYSCALL32(rt_sigqueueinfo) +SYSX(ppc64_rt_sigsuspend,ppc32_rt_sigsuspend,ppc_rt_sigsuspend) +SYSCALL32(pread64) +SYSCALL32(pwrite64) +SYSCALL(chown) +SYSCALL(getcwd) +SYSCALL(capget) +SYSCALL(capset) +SYSCALL32(sigaltstack) +SYSX(sys_sendfile64,sys32_sendfile,sys_sendfile) +SYSCALL(ni_syscall) +SYSCALL(ni_syscall) +PPC_SYS(vfork) +COMPAT_SYS(getrlimit) +SYSCALL32(readahead) +SYS32ONLY(mmap2) +SYS32ONLY(truncate64) +SYS32ONLY(ftruncate64) +SYSX(sys_ni_syscall,sys_stat64,sys_stat64) +SYSX(sys_ni_syscall,sys_lstat64,sys_lstat64) +SYSX(sys_ni_syscall,sys_fstat64,sys_fstat64) +SYSCALL32(pciconfig_read) +SYSCALL32(pciconfig_write) +SYSCALL32(pciconfig_iobase) +SYSCALL(ni_syscall) +SYSCALL(getdents64) +SYSCALL(pivot_root) +SYSX(sys_ni_syscall,compat_sys_fcntl64,sys_fcntl64) +SYSCALL(madvise) +SYSCALL(mincore) +SYSCALL(gettid) +SYSCALL(tkill) +SYSCALL(setxattr) +SYSCALL(lsetxattr) +SYSCALL(fsetxattr) +SYSCALL(getxattr) +SYSCALL(lgetxattr) +SYSCALL(fgetxattr) +SYSCALL(listxattr) +SYSCALL(llistxattr) +SYSCALL(flistxattr) +SYSCALL(removexattr) +SYSCALL(lremovexattr) +SYSCALL(fremovexattr) +COMPAT_SYS(futex) +COMPAT_SYS(sched_setaffinity) +COMPAT_SYS(sched_getaffinity) +SYSCALL(ni_syscall) +SYSCALL(ni_syscall) +SYS32ONLY(sendfile64) +COMPAT_SYS(io_setup) +SYSCALL(io_destroy) +COMPAT_SYS(io_getevents) +COMPAT_SYS(io_submit) +SYSCALL(io_cancel) +SYSCALL(set_tid_address) +SYSX(sys_fadvise64,ppc32_fadvise64,sys_fadvise64) +SYSCALL(exit_group) +SYSX(sys_lookup_dcookie,ppc32_lookup_dcookie,sys_lookup_dcookie) +SYSCALL(epoll_create) +SYSCALL(epoll_ctl) +SYSCALL(epoll_wait) +SYSCALL(remap_file_pages) +SYSX(sys_timer_create,ppc32_timer_create,sys_timer_create) +COMPAT_SYS(timer_settime) +COMPAT_SYS(timer_gettime) +SYSCALL(timer_getoverrun) +SYSCALL(timer_delete) +COMPAT_SYS(clock_settime) +COMPAT_SYS(clock_gettime) +COMPAT_SYS(clock_getres) +COMPAT_SYS(clock_nanosleep) +SYSX(ppc64_swapcontext,ppc32_swapcontext,ppc_swapcontext) +SYSCALL32(tgkill) +SYSCALL32(utimes) +COMPAT_SYS(statfs64) +COMPAT_SYS(fstatfs64) +SYSX(sys_ni_syscall, ppc32_fadvise64_64, sys_fadvise64_64) +PPC_SYS(rtas) +OLDSYS(debug_setcontext) +SYSCALL(ni_syscall) +SYSCALL(ni_syscall) +COMPAT_SYS(mbind) +COMPAT_SYS(get_mempolicy) +COMPAT_SYS(set_mempolicy) +COMPAT_SYS(mq_open) +SYSCALL(mq_unlink) +COMPAT_SYS(mq_timedsend) +COMPAT_SYS(mq_timedreceive) +COMPAT_SYS(mq_notify) +COMPAT_SYS(mq_getsetattr) +COMPAT_SYS(kexec_load) +SYSCALL32(add_key) +SYSCALL32(request_key) +COMPAT_SYS(keyctl) +COMPAT_SYS(waitid) +SYSCALL32(ioprio_set) +SYSCALL32(ioprio_get) +SYSCALL(inotify_init) +SYSCALL(inotify_add_watch) +SYSCALL(inotify_rm_watch) -- 2.34.1