From 9cad9c95d7e8d6d61d8c9729e0b6bbd18f47d86d Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Fri, 13 Jul 2012 00:57:26 +0200 Subject: [PATCH] Documentation: DocBook DRM framework documentation Signed-off-by: Laurent Pinchart Reviewed-by: Rob Clark --- Documentation/DocBook/drm.tmpl | 2835 +++++++++++++++++++++++++------- 1 file changed, 2226 insertions(+), 609 deletions(-) diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index 196b8b9dba11..b0300529ab13 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -6,11 +6,36 @@ Linux DRM Developer's Guide + + + Jesse + Barnes + Initial version + + Intel Corporation +
+ jesse.barnes@intel.com +
+
+
+ + Laurent + Pinchart + Driver internals + + Ideas on board SPRL +
+ laurent.pinchart@ideasonboard.com +
+
+
+
+ 2008-2009 - - Intel Corporation (Jesse Barnes <jesse.barnes@intel.com>) - + 2012 + Intel Corporation + Laurent Pinchart @@ -20,6 +45,17 @@ the kernel source COPYING file. + + + + + 1.0 + 2012-07-13 + LP + Added extensive documentation about driver internals. + + +
@@ -72,342 +108,361 @@ submission & fencing, suspend/resume support, and DMA services. - - The core of every DRM driver is struct drm_driver. Drivers - typically statically initialize a drm_driver structure, - then pass it to drm_init() at load time. - - Driver initialization - - Before calling the DRM initialization routines, the driver must - first create and fill out a struct drm_driver structure. - - - static struct drm_driver driver = { - /* Don't use MTRRs here; the Xserver or userspace app should - * deal with them for Intel hardware. - */ - .driver_features = - DRIVER_USE_AGP | DRIVER_REQUIRE_AGP | - DRIVER_HAVE_IRQ | DRIVER_IRQ_SHARED | DRIVER_MODESET, - .load = i915_driver_load, - .unload = i915_driver_unload, - .firstopen = i915_driver_firstopen, - .lastclose = i915_driver_lastclose, - .preclose = i915_driver_preclose, - .save = i915_save, - .restore = i915_restore, - .device_is_agp = i915_driver_device_is_agp, - .get_vblank_counter = i915_get_vblank_counter, - .enable_vblank = i915_enable_vblank, - .disable_vblank = i915_disable_vblank, - .irq_preinstall = i915_driver_irq_preinstall, - .irq_postinstall = i915_driver_irq_postinstall, - .irq_uninstall = i915_driver_irq_uninstall, - .irq_handler = i915_driver_irq_handler, - .reclaim_buffers = drm_core_reclaim_buffers, - .get_map_ofs = drm_core_get_map_ofs, - .get_reg_ofs = drm_core_get_reg_ofs, - .fb_probe = intelfb_probe, - .fb_remove = intelfb_remove, - .fb_resize = intelfb_resize, - .master_create = i915_master_create, - .master_destroy = i915_master_destroy, -#if defined(CONFIG_DEBUG_FS) - .debugfs_init = i915_debugfs_init, - .debugfs_cleanup = i915_debugfs_cleanup, -#endif - .gem_init_object = i915_gem_init_object, - .gem_free_object = i915_gem_free_object, - .gem_vm_ops = &i915_gem_vm_ops, - .ioctls = i915_ioctls, - .fops = { - .owner = THIS_MODULE, - .open = drm_open, - .release = drm_release, - .ioctl = drm_ioctl, - .mmap = drm_mmap, - .poll = drm_poll, - .fasync = drm_fasync, -#ifdef CONFIG_COMPAT - .compat_ioctl = i915_compat_ioctl, -#endif - .llseek = noop_llseek, - }, - .pci_driver = { - .name = DRIVER_NAME, - .id_table = pciidlist, - .probe = probe, - .remove = __devexit_p(drm_cleanup_pci), - }, - .name = DRIVER_NAME, - .desc = DRIVER_DESC, - .date = DRIVER_DATE, - .major = DRIVER_MAJOR, - .minor = DRIVER_MINOR, - .patchlevel = DRIVER_PATCHLEVEL, - }; - - - In the example above, taken from the i915 DRM driver, the driver - sets several flags indicating what core features it supports; - we go over the individual callbacks in later sections. Since - flags indicate which features your driver supports to the DRM - core, you need to set most of them prior to calling drm_init(). Some, - like DRIVER_MODESET can be set later based on user supplied parameters, - but that's the exception rather than the rule. - - - Driver flags - - DRIVER_USE_AGP - - Driver uses AGP interface - - - - DRIVER_REQUIRE_AGP - - Driver needs AGP interface to function. - - - - DRIVER_USE_MTRR - - - Driver uses MTRR interface for mapping memory. Deprecated. - - - - - DRIVER_PCI_DMA - - Driver is capable of PCI DMA. Deprecated. - - - - DRIVER_SG - - Driver can perform scatter/gather DMA. Deprecated. - - - - DRIVER_HAVE_DMA - Driver supports DMA. Deprecated. - - - DRIVER_HAVE_IRQDRIVER_IRQ_SHARED - - - DRIVER_HAVE_IRQ indicates whether the driver has an IRQ - handler. DRIVER_IRQ_SHARED indicates whether the device & - handler support shared IRQs (note that this is required of - PCI drivers). - - - - - DRIVER_DMA_QUEUE - - - Should be set if the driver queues DMA requests and completes them - asynchronously. Deprecated. - - - - - DRIVER_FB_DMA - - - Driver supports DMA to/from the framebuffer. Deprecated. - - - - - DRIVER_MODESET - - - Driver supports mode setting interfaces. - - - - - - In this specific case, the driver requires AGP and supports - IRQs. DMA, as discussed later, is handled by device-specific ioctls - in this case. It also supports the kernel mode setting APIs, though - unlike in the actual i915 driver source, this example unconditionally - exports KMS capability. + Driver Initialization + + At the core of every DRM driver is a drm_driver + structure. Drivers typically statically initialize a drm_driver structure, + and then pass it to one of the drm_*_init() functions + to register it with the DRM subsystem. - - - - - - Driver load - - In the previous section, we saw what a typical drm_driver - structure might look like. One of the more important fields in - the structure is the hook for the load function. - - - static struct drm_driver driver = { - ... - .load = i915_driver_load, - ... - }; - - - The load function has many responsibilities: allocating a driver - private structure, specifying supported performance counters, - configuring the device (e.g. mapping registers & command - buffers), initializing the memory manager, and setting up the - initial output configuration. - - - If compatibility is a concern (e.g. with drivers converted over - to the new interfaces from the old ones), care must be taken to - prevent device initialization and control that is incompatible with - currently active userspace drivers. For instance, if user - level mode setting drivers are in use, it would be problematic - to perform output discovery & configuration at load time. - Likewise, if user-level drivers unaware of memory management are - in use, memory management and command buffer setup may need to - be omitted. These requirements are driver-specific, and care - needs to be taken to keep both old and new applications and - libraries working. The i915 driver supports the "modeset" - module parameter to control whether advanced features are - enabled at load time or in legacy fashion. + + The drm_driver structure contains static + information that describes the driver and features it supports, and + pointers to methods that the DRM core will call to implement the DRM API. + We will first go through the drm_driver static + information fields, and will then describe individual operations in + details as they get used in later sections. - - Driver private & performance counters - - The driver private hangs off the main drm_device structure and - can be used for tracking various device-specific bits of - information, like register offsets, command buffer status, - register state for suspend/resume, etc. At load time, a - driver may simply allocate one and set drm_device.dev_priv - appropriately; it should be freed and drm_device.dev_priv set - to NULL when the driver is unloaded. - + Driver Information + + Driver Features + + Drivers inform the DRM core about their requirements and supported + features by setting appropriate flags in the + driver_features field. Since those flags + influence the DRM core behaviour since registration time, most of them + must be set to registering the drm_driver + instance. + + u32 driver_features; + + Driver Feature Flags + + DRIVER_USE_AGP + + Driver uses AGP interface, the DRM core will manage AGP resources. + + + + DRIVER_REQUIRE_AGP + + Driver needs AGP interface to function. AGP initialization failure + will become a fatal error. + + + + DRIVER_USE_MTRR + + Driver uses MTRR interface for mapping memory, the DRM core will + manage MTRR resources. Deprecated. + + + + DRIVER_PCI_DMA + + Driver is capable of PCI DMA, mapping of PCI DMA buffers to + userspace will be enabled. Deprecated. + + + + DRIVER_SG + + Driver can perform scatter/gather DMA, allocation and mapping of + scatter/gather buffers will be enabled. Deprecated. + + + + DRIVER_HAVE_DMA + + Driver supports DMA, the userspace DMA API will be supported. + Deprecated. + + + + DRIVER_HAVE_IRQDRIVER_IRQ_SHARED + + DRIVER_HAVE_IRQ indicates whether the driver has an IRQ handler. The + DRM core will automatically register an interrupt handler when the + flag is set. DRIVER_IRQ_SHARED indicates whether the device & + handler support shared IRQs (note that this is required of PCI + drivers). + + + + DRIVER_IRQ_VBL + Unused. Deprecated. + + + DRIVER_DMA_QUEUE + + Should be set if the driver queues DMA requests and completes them + asynchronously. Deprecated. + + + + DRIVER_FB_DMA + + Driver supports DMA to/from the framebuffer, mapping of frambuffer + DMA buffers to userspace will be supported. Deprecated. + + + + DRIVER_IRQ_VBL2 + Unused. Deprecated. + + + DRIVER_GEM + + Driver use the GEM memory manager. + + + + DRIVER_MODESET + + Driver supports mode setting interfaces (KMS). + + + + DRIVER_PRIME + + Driver implements DRM PRIME buffer sharing. + + + + + + Major, Minor and Patchlevel + int major; +int minor; +int patchlevel; + + The DRM core identifies driver versions by a major, minor and patch + level triplet. The information is printed to the kernel log at + initialization time and passed to userspace through the + DRM_IOCTL_VERSION ioctl. + + + The major and minor numbers are also used to verify the requested driver + API version passed to DRM_IOCTL_SET_VERSION. When the driver API changes + between minor versions, applications can call DRM_IOCTL_SET_VERSION to + select a specific version of the API. If the requested major isn't equal + to the driver major, or the requested minor is larger than the driver + minor, the DRM_IOCTL_SET_VERSION call will return an error. Otherwise + the driver's set_version() method will be called with the requested + version. + + + + Name, Description and Date + char *name; +char *desc; +char *date; + + The driver name is printed to the kernel log at initialization time, + used for IRQ registration and passed to userspace through + DRM_IOCTL_VERSION. + + + The driver description is a purely informative string passed to + userspace through the DRM_IOCTL_VERSION ioctl and otherwise unused by + the kernel. + + + The driver date, formatted as YYYYMMDD, is meant to identify the date of + the latest modification to the driver. However, as most drivers fail to + update it, its value is mostly useless. The DRM core prints it to the + kernel log at initialization time and passes it to userspace through the + DRM_IOCTL_VERSION ioctl. + + + + + Driver Load - The DRM supports several counters which may be used for rough - performance characterization. Note that the DRM stat counter - system is not often used by applications, and supporting - additional counters is completely optional. + The load method is the driver and device + initialization entry point. The method is responsible for allocating and + initializing driver private data, specifying supported performance + counters, performing resource allocation and mapping (e.g. acquiring + clocks, mapping registers or allocating command buffers), initializing + the memory manager (), installing + the IRQ handler (), setting up + vertical blanking handling (), mode + setting () and initial output + configuration (). + + If compatibility is a concern (e.g. with drivers converted over from + User Mode Setting to Kernel Mode Setting), care must be taken to prevent + device initialization and control that is incompatible with currently + active userspace drivers. For instance, if user level mode setting + drivers are in use, it would be problematic to perform output discovery + & configuration at load time. Likewise, if user-level drivers + unaware of memory management are in use, memory management and command + buffer setup may need to be omitted. These requirements are + driver-specific, and care needs to be taken to keep both old and new + applications and libraries working. + + int (*load) (struct drm_device *, unsigned long flags); - These interfaces are deprecated and should not be used. If performance - monitoring is desired, the developer should investigate and - potentially enhance the kernel perf and tracing infrastructure to export - GPU related performance information for consumption by performance - monitoring tools and applications. + The method takes two arguments, a pointer to the newly created + drm_device and flags. The flags are used to + pass the driver_data field of the device id + corresponding to the device passed to drm_*_init(). + Only PCI devices currently use this, USB and platform DRM drivers have + their load method called with flags to 0. + + Driver Private & Performance Counters + + The driver private hangs off the main + drm_device structure and can be used for + tracking various device-specific bits of information, like register + offsets, command buffer status, register state for suspend/resume, etc. + At load time, a driver may simply allocate one and set + drm_device.dev_priv + appropriately; it should be freed and + drm_device.dev_priv + set to NULL when the driver is unloaded. + + + DRM supports several counters which were used for rough performance + characterization. This stat counter system is deprecated and should not + be used. If performance monitoring is desired, the developer should + investigate and potentially enhance the kernel perf and tracing + infrastructure to export GPU related performance information for + consumption by performance monitoring tools and applications. + + + + IRQ Registration + + The DRM core tries to facilitate IRQ handler registration and + unregistration by providing drm_irq_install and + drm_irq_uninstall functions. Those functions only + support a single interrupt per device. + + + + Both functions get the device IRQ by calling + drm_dev_to_irq. This inline function will call a + bus-specific operation to retrieve the IRQ number. For platform devices, + platform_get_irq(..., 0) is used to retrieve the + IRQ number. + + + drm_irq_install starts by calling the + irq_preinstall driver operation. The operation + is optional and must make sure that the interrupt will not get fired by + clearing all pending interrupt flags or disabling the interrupt. + + + The IRQ will then be requested by a call to + request_irq. If the DRIVER_IRQ_SHARED driver + feature flag is set, a shared (IRQF_SHARED) IRQ handler will be + requested. + + + The IRQ handler function must be provided as the mandatory irq_handler + driver operation. It will get passed directly to + request_irq and thus has the same prototype as all + IRQ handlers. It will get called with a pointer to the DRM device as the + second argument. + + + Finally the function calls the optional + irq_postinstall driver operation. The operation + usually enables interrupts (excluding the vblank interrupt, which is + enabled separately), but drivers may choose to enable/disable interrupts + at a different time. + + + drm_irq_uninstall is similarly used to uninstall an + IRQ handler. It starts by waking up all processes waiting on a vblank + interrupt to make sure they don't hang, and then calls the optional + irq_uninstall driver operation. The operation + must disable all hardware interrupts. Finally the function frees the IRQ + by calling free_irq. + + + + Memory Manager Initialization + + Every DRM driver requires a memory manager which must be initialized at + load time. DRM currently contains two memory managers, the Translation + Table Manager (TTM) and the Graphics Execution Manager (GEM). + This document describes the use of the GEM memory manager only. See + for details. + + + + Miscellaneous Device Configuration + + Another task that may be necessary for PCI devices during configuration + is mapping the video BIOS. On many devices, the VBIOS describes device + configuration, LCD panel timings (if any), and contains flags indicating + device state. Mapping the BIOS can be done using the pci_map_rom() call, + a convenience function that takes care of mapping the actual ROM, + whether it has been shadowed into memory (typically at address 0xc0000) + or exists on the PCI device in the ROM BAR. Note that after the ROM has + been mapped and any necessary information has been extracted, it should + be unmapped; on many devices, the ROM address decoder is shared with + other BARs, so leaving it mapped could cause undesired behaviour like + hangs or memory corruption. + + + + - - Configuring the device - - Obviously, device configuration is device-specific. - However, there are several common operations: finding a - device's PCI resources, mapping them, and potentially setting - up an IRQ handler. - - - Finding & mapping resources is fairly straightforward. The - DRM wrapper functions, drm_get_resource_start() and - drm_get_resource_len(), may be used to find BARs on the given - drm_device struct. Once those values have been retrieved, the - driver load function can call drm_addmap() to create a new - mapping for the BAR in question. Note that you probably want a - drm_local_map_t in your driver private structure to track any - mappings you create. - - - - - if compatibility with other operating systems isn't a concern - (DRM drivers can run under various BSD variants and OpenSolaris), - native Linux calls may be used for the above, e.g. pci_resource_* - and iomap*/iounmap. See the Linux device driver book for more - info. - - - Once you have a register map, you may use the DRM_READn() and - DRM_WRITEn() macros to access the registers on your device, or - use driver-specific versions to offset into your MMIO space - relative to a driver-specific base pointer (see I915_READ for - an example). - - - If your device supports interrupt generation, you may want to - set up an interrupt handler when the driver is loaded. This - is done using the drm_irq_install() function. If your device - supports vertical blank interrupts, it should call - drm_vblank_init() to initialize the core vblank handling code before - enabling interrupts on your device. This ensures the vblank related - structures are allocated and allows the core to handle vblank events. - - - - Once your interrupt handler is registered (it uses your - drm_driver.irq_handler as the actual interrupt handling - function), you can safely enable interrupts on your device, - assuming any other state your interrupt handler uses is also - initialized. - - - Another task that may be necessary during configuration is - mapping the video BIOS. On many devices, the VBIOS describes - device configuration, LCD panel timings (if any), and contains - flags indicating device state. Mapping the BIOS can be done - using the pci_map_rom() call, a convenience function that - takes care of mapping the actual ROM, whether it has been - shadowed into memory (typically at address 0xc0000) or exists - on the PCI device in the ROM BAR. Note that after the ROM - has been mapped and any necessary information has been extracted, - it should be unmapped; on many devices, the ROM address decoder is - shared with other BARs, so leaving it mapped could cause - undesired behavior like hangs or memory corruption. - - - + + + Memory management + + Modern Linux systems require large amount of graphics memory to store + frame buffers, textures, vertices and other graphics-related data. Given + the very dynamic nature of many of that data, managing graphics memory + efficiently is thus crucial for the graphics stack and plays a central + role in the DRM infrastructure. + + + The DRM core includes two memory managers, namely Translation Table Maps + (TTM) and Graphics Execution Manager (GEM). TTM was the first DRM memory + manager to be developed and tried to be a one-size-fits-them all + solution. It provides a single userspace API to accomodate the need of + all hardware, supporting both Unified Memory Architecture (UMA) devices + and devices with dedicated video RAM (i.e. most discrete video cards). + This resulted in a large, complex piece of code that turned out to be + hard to use for driver development. + + + GEM started as an Intel-sponsored project in reaction to TTM's + complexity. Its design philosophy is completely different: instead of + providing a solution to every graphics memory-related problems, GEM + identified common code between drivers and created a support library to + share it. GEM has simpler initialization and execution requirements than + TTM, but has no video RAM management capabitilies and is thus limited to + UMA devices. + - Memory manager initialization - - In order to allocate command buffers, cursor memory, scanout - buffers, etc., as well as support the latest features provided - by packages like Mesa and the X.Org X server, your driver - should support a memory manager. - + The Translation Table Manager (TTM) - If your driver supports memory management (it should!), you - need to set that up at load time as well. How you initialize - it depends on which memory manager you're using: TTM or GEM. + TTM design background and information belongs here. TTM initialization - - TTM (for Translation Table Manager) manages video memory and - aperture space for graphics devices. TTM supports both UMA devices - and devices with dedicated video RAM (VRAM), i.e. most discrete - graphics devices. If your device has dedicated RAM, supporting - TTM is desirable. TTM also integrates tightly with your - driver-specific buffer execution function. See the radeon - driver for examples. - - - The core TTM structure is the ttm_bo_driver struct. It contains - several fields with function pointers for initializing the TTM, - allocating and freeing memory, waiting for command completion - and fence synchronization, and memory migration. See the - radeon_ttm.c file for an example of usage. + This section is outdated. + + Drivers wishing to support TTM must fill out a drm_bo_driver + structure. The structure contains several fields with function + pointers for initializing the TTM, allocating and freeing memory, + waiting for command completion and fence synchronization, and memory + migration. See the radeon_ttm.c file for an example of usage. The ttm_global_reference structure is made up of several fields: @@ -445,82 +500,1081 @@ count for the TTM, which will call your initialization function. + + + The Graphics Execution Manager (GEM) + + The GEM design approach has resulted in a memory manager that doesn't + provide full coverage of all (or even all common) use cases in its + userspace or kernel API. GEM exposes a set of standard memory-related + operations to userspace and a set of helper functions to drivers, and let + drivers implement hardware-specific operations with their own private API. + + + The GEM userspace API is described in the + GEM - the Graphics + Execution Manager article on LWN. While slightly + outdated, the document provides a good overview of the GEM API principles. + Buffer allocation and read and write operations, described as part of the + common GEM API, are currently implemented using driver-specific ioctls. + + + GEM is data-agnostic. It manages abstract buffer objects without knowing + what individual buffers contain. APIs that require knowledge of buffer + contents or purpose, such as buffer allocation or synchronization + primitives, are thus outside of the scope of GEM and must be implemented + using driver-specific ioctls. + + + On a fundamental level, GEM involves several operations: + + Memory allocation and freeing + Command execution + Aperture management at command execution time + + Buffer object allocation is relatively straightforward and largely + provided by Linux's shmem layer, which provides memory to back each + object. + + + Device-specific operations, such as command execution, pinning, buffer + read & write, mapping, and domain ownership transfers are left to + driver-specific ioctls. + + + GEM Initialization + + Drivers that use GEM must set the DRIVER_GEM bit in the struct + drm_driver + driver_features field. The DRM core will + then automatically initialize the GEM core before calling the + load operation. Behind the scene, this will + create a DRM Memory Manager object which provides an address space + pool for object allocation. + + + In a KMS configuration, drivers need to allocate and initialize a + command ring buffer following core GEM initialization if required by + the hardware. UMA devices usually have what is called a "stolen" + memory region, which provides space for the initial framebuffer and + large, contiguous memory regions required by the device. This space is + typically not managed by GEM, and must be initialized separately into + its own DRM MM object. + + - GEM initialization - - GEM is an alternative to TTM, designed specifically for UMA - devices. It has simpler initialization and execution requirements - than TTM, but has no VRAM management capability. Core GEM - is initialized by calling drm_mm_init() to create - a GTT DRM MM object, which provides an address space pool for - object allocation. In a KMS configuration, the driver - needs to allocate and initialize a command ring buffer following - core GEM initialization. A UMA device usually has what is called a - "stolen" memory region, which provides space for the initial - framebuffer and large, contiguous memory regions required by the - device. This space is not typically managed by GEM, and it must - be initialized separately into its own DRM MM object. - - - Initialization is driver-specific. In the case of Intel - integrated graphics chips like 965GM, GEM initialization can - be done by calling the internal GEM init function, - i915_gem_do_init(). Since the 965GM is a UMA device - (i.e. it doesn't have dedicated VRAM), GEM manages - making regular RAM available for GPU operations. Memory set - aside by the BIOS (called "stolen" memory by the i915 - driver) is managed by the DRM memrange allocator; the - rest of the aperture is managed by GEM. - - /* Basic memrange allocator for stolen space (aka vram) */ - drm_memrange_init(&dev_priv->vram, 0, prealloc_size); - /* Let GEM Manage from end of prealloc space to end of aperture */ - i915_gem_do_init(dev, prealloc_size, agp_size); - - - - - Once the memory manager has been set up, we may allocate the - command buffer. In the i915 case, this is also done with a - GEM function, i915_gem_init_ringbuffer(). - + GEM Objects Creation + + GEM splits creation of GEM objects and allocation of the memory that + backs them in two distinct operations. + + + GEM objects are represented by an instance of struct + drm_gem_object. Drivers usually need to extend + GEM objects with private information and thus create a driver-specific + GEM object structure type that embeds an instance of struct + drm_gem_object. + + + To create a GEM object, a driver allocates memory for an instance of its + specific GEM object type and initializes the embedded struct + drm_gem_object with a call to + drm_gem_object_init. The function takes a pointer to + the DRM device, a pointer to the GEM object and the buffer object size + in bytes. + + + GEM uses shmem to allocate anonymous pageable memory. + drm_gem_object_init will create an shmfs file of + the requested size and store it into the struct + drm_gem_object filp + field. The memory is used as either main storage for the object when the + graphics hardware uses system memory directly or as a backing store + otherwise. + + + Drivers are responsible for the actual physical pages allocation by + calling shmem_read_mapping_page_gfp for each page. + Note that they can decide to allocate pages when initializing the GEM + object, or to delay allocation until the memory is needed (for instance + when a page fault occurs as a result of a userspace memory access or + when the driver needs to start a DMA transfer involving the memory). + + + Anonymous pageable memory allocation is not always desired, for instance + when the hardware requires physically contiguous system memory as is + often the case in embedded devices. Drivers can create GEM objects with + no shmfs backing (called private GEM objects) by initializing them with + a call to drm_gem_private_object_init instead of + drm_gem_object_init. Storage for private GEM + objects must be managed by drivers. + + + Drivers that do not need to extend GEM objects with private information + can call the drm_gem_object_alloc function to + allocate and initialize a struct drm_gem_object + instance. The GEM core will call the optional driver + gem_init_object operation after initializing + the GEM object with drm_gem_object_init. + int (*gem_init_object) (struct drm_gem_object *obj); + + + No alloc-and-init function exists for private GEM objects. + + + + GEM Objects Lifetime + + All GEM objects are reference-counted by the GEM core. References can be + acquired and release by calling drm_gem_object_reference + and drm_gem_object_unreference respectively. The + caller must hold the drm_device + struct_mutex lock. As a convenience, GEM + provides the drm_gem_object_reference_unlocked and + drm_gem_object_unreference_unlocked functions that + can be called without holding the lock. + + + When the last reference to a GEM object is released the GEM core calls + the drm_driver + gem_free_object operation. That operation is + mandatory for GEM-enabled drivers and must free the GEM object and all + associated resources. + + + void (*gem_free_object) (struct drm_gem_object *obj); + Drivers are responsible for freeing all GEM object resources, including + the resources created by the GEM core. If an mmap offset has been + created for the object (in which case + drm_gem_object::map_list::map + is not NULL) it must be freed by a call to + drm_gem_free_mmap_offset. The shmfs backing store + must be released by calling drm_gem_object_release + (that function can safely be called if no shmfs backing store has been + created). + + + + GEM Objects Naming + + Communication between userspace and the kernel refers to GEM objects + using local handles, global names or, more recently, file descriptors. + All of those are 32-bit integer values; the usual Linux kernel limits + apply to the file descriptors. + + + GEM handles are local to a DRM file. Applications get a handle to a GEM + object through a driver-specific ioctl, and can use that handle to refer + to the GEM object in other standard or driver-specific ioctls. Closing a + DRM file handle frees all its GEM handles and dereferences the + associated GEM objects. + + + To create a handle for a GEM object drivers call + drm_gem_handle_create. The function takes a pointer + to the DRM file and the GEM object and returns a locally unique handle. + When the handle is no longer needed drivers delete it with a call to + drm_gem_handle_delete. Finally the GEM object + associated with a handle can be retrieved by a call to + drm_gem_object_lookup. + + + Handles don't take ownership of GEM objects, they only take a reference + to the object that will be dropped when the handle is destroyed. To + avoid leaking GEM objects, drivers must make sure they drop the + reference(s) they own (such as the initial reference taken at object + creation time) as appropriate, without any special consideration for the + handle. For example, in the particular case of combined GEM object and + handle creation in the implementation of the + dumb_create operation, drivers must drop the + initial reference to the GEM object before returning the handle. + + + GEM names are similar in purpose to handles but are not local to DRM + files. They can be passed between processes to reference a GEM object + globally. Names can't be used directly to refer to objects in the DRM + API, applications must convert handles to names and names to handles + using the DRM_IOCTL_GEM_FLINK and DRM_IOCTL_GEM_OPEN ioctls + respectively. The conversion is handled by the DRM core without any + driver-specific support. + + + Similar to global names, GEM file descriptors are also used to share GEM + objects across processes. They offer additional security: as file + descriptors must be explictly sent over UNIX domain sockets to be shared + between applications, they can't be guessed like the globally unique GEM + names. + + + Drivers that support GEM file descriptors, also known as the DRM PRIME + API, must set the DRIVER_PRIME bit in the struct + drm_driver + driver_features field, and implement the + prime_handle_to_fd and + prime_fd_to_handle operations. + + + int (*prime_handle_to_fd)(struct drm_device *dev, + struct drm_file *file_priv, uint32_t handle, + uint32_t flags, int *prime_fd); + int (*prime_fd_to_handle)(struct drm_device *dev, + struct drm_file *file_priv, int prime_fd, + uint32_t *handle); + Those two operations convert a handle to a PRIME file descriptor and + vice versa. Drivers must use the kernel dma-buf buffer sharing framework + to manage the PRIME file descriptors. + + + While non-GEM drivers must implement the operations themselves, GEM + drivers must use the drm_gem_prime_handle_to_fd + and drm_gem_prime_fd_to_handle helper functions. + Those helpers rely on the driver + gem_prime_export and + gem_prime_import operations to create a dma-buf + instance from a GEM object (dma-buf exporter role) and to create a GEM + object from a dma-buf instance (dma-buf importer role). + + + struct dma_buf * (*gem_prime_export)(struct drm_device *dev, + struct drm_gem_object *obj, + int flags); + struct drm_gem_object * (*gem_prime_import)(struct drm_device *dev, + struct dma_buf *dma_buf); + These two operations are mandatory for GEM drivers that support DRM + PRIME. + + + + GEM Objects Mapping + + Because mapping operations are fairly heavyweight GEM favours + read/write-like access to buffers, implemented through driver-specific + ioctls, over mapping buffers to userspace. However, when random access + to the buffer is needed (to perform software rendering for instance), + direct access to the object can be more efficient. + + + The mmap system call can't be used directly to map GEM objects, as they + don't have their own file handle. Two alternative methods currently + co-exist to map GEM objects to userspace. The first method uses a + driver-specific ioctl to perform the mapping operation, calling + do_mmap under the hood. This is often considered + dubious, seems to be discouraged for new GEM-enabled drivers, and will + thus not be described here. + + + The second method uses the mmap system call on the DRM file handle. + void *mmap(void *addr, size_t length, int prot, int flags, int fd, + off_t offset); + DRM identifies the GEM object to be mapped by a fake offset passed + through the mmap offset argument. Prior to being mapped, a GEM object + must thus be associated with a fake offset. To do so, drivers must call + drm_gem_create_mmap_offset on the object. The + function allocates a fake offset range from a pool and stores the + offset divided by PAGE_SIZE in + obj->map_list.hash.key. Care must be taken not to + call drm_gem_create_mmap_offset if a fake offset + has already been allocated for the object. This can be tested by + obj->map_list.map being non-NULL. + + + Once allocated, the fake offset value + (obj->map_list.hash.key << PAGE_SHIFT) + must be passed to the application in a driver-specific way and can then + be used as the mmap offset argument. + + + The GEM core provides a helper method drm_gem_mmap + to handle object mapping. The method can be set directly as the mmap + file operation handler. It will look up the GEM object based on the + offset value and set the VMA operations to the + drm_driver gem_vm_ops + field. Note that drm_gem_mmap doesn't map memory to + userspace, but relies on the driver-provided fault handler to map pages + individually. + + + To use drm_gem_mmap, drivers must fill the struct + drm_driver gem_vm_ops + field with a pointer to VM operations. + + + struct vm_operations_struct *gem_vm_ops + + struct vm_operations_struct { + void (*open)(struct vm_area_struct * area); + void (*close)(struct vm_area_struct * area); + int (*fault)(struct vm_area_struct *vma, struct vm_fault *vmf); + }; + + + The open and close + operations must update the GEM object reference count. Drivers can use + the drm_gem_vm_open and + drm_gem_vm_close helper functions directly as open + and close handlers. + + + The fault operation handler is responsible for mapping individual pages + to userspace when a page fault occurs. Depending on the memory + allocation scheme, drivers can allocate pages at fault time, or can + decide to allocate memory for the GEM object at the time the object is + created. + + + Drivers that want to map the GEM object upfront instead of handling page + faults can implement their own mmap file operation handler. + + + + Dumb GEM Objects + + The GEM API doesn't standardize GEM objects creation and leaves it to + driver-specific ioctls. While not an issue for full-fledged graphics + stacks that include device-specific userspace components (in libdrm for + instance), this limit makes DRM-based early boot graphics unnecessarily + complex. + + + Dumb GEM objects partly alleviate the problem by providing a standard + API to create dumb buffers suitable for scanout, which can then be used + to create KMS frame buffers. + + + To support dumb GEM objects drivers must implement the + dumb_create, + dumb_destroy and + dumb_map_offset operations. + + + + int (*dumb_create)(struct drm_file *file_priv, struct drm_device *dev, + struct drm_mode_create_dumb *args); + + The dumb_create operation creates a GEM + object suitable for scanout based on the width, height and depth + from the struct drm_mode_create_dumb + argument. It fills the argument's handle, + pitch and size + fields with a handle for the newly created GEM object and its line + pitch and size in bytes. + + + + int (*dumb_destroy)(struct drm_file *file_priv, struct drm_device *dev, + uint32_t handle); + + The dumb_destroy operation destroys a dumb + GEM object created by dumb_create. + + + + int (*dumb_map_offset)(struct drm_file *file_priv, struct drm_device *dev, + uint32_t handle, uint64_t *offset); + + The dumb_map_offset operation associates an + mmap fake offset with the GEM object given by the handle and returns + it. Drivers must use the + drm_gem_create_mmap_offset function to + associate the fake offset as described in + . + + + + + + Memory Coherency + + When mapped to the device or used in a command buffer, backing pages + for an object are flushed to memory and marked write combined so as to + be coherent with the GPU. Likewise, if the CPU accesses an object + after the GPU has finished rendering to the object, then the object + must be made coherent with the CPU's view of memory, usually involving + GPU cache flushing of various kinds. This core CPU<->GPU + coherency management is provided by a device-specific ioctl, which + evaluates an object's current domain and performs any necessary + flushing or synchronization to put the object into the desired + coherency domain (note that the object may be busy, i.e. an active + render target; in that case, setting the domain blocks the client and + waits for rendering to complete before performing any necessary + flushing operations). + + + + Command Execution + + Perhaps the most important GEM function for GPU devices is providing a + command execution interface to clients. Client programs construct + command buffers containing references to previously allocated memory + objects, and then submit them to GEM. At that point, GEM takes care to + bind all the objects into the GTT, execute the buffer, and provide + necessary synchronization between clients accessing the same buffers. + This often involves evicting some objects from the GTT and re-binding + others (a fairly expensive operation), and providing relocation + support which hides fixed GTT offsets from clients. Clients must take + care not to submit command buffers that reference more objects than + can fit in the GTT; otherwise, GEM will reject them and no rendering + will occur. Similarly, if several objects in the buffer require fence + registers to be allocated for correct rendering (e.g. 2D blits on + pre-965 chips), care must be taken not to require more fence registers + than are available to the client. Such resource management should be + abstracted from the client in libdrm. + + + + + + Mode Setting + + Drivers must initialize the mode setting core by calling + drm_mode_config_init on the DRM device. The function + initializes the drm_device + mode_config field and never fails. Once done, + mode configuration must be setup by initializing the following fields. + + + + int min_width, min_height; +int max_width, max_height; + + Minimum and maximum width and height of the frame buffers in pixel + units. + + + + struct drm_mode_config_funcs *funcs; + Mode setting functions. + + - Output configuration + Frame Buffer Creation + struct drm_framebuffer *(*fb_create)(struct drm_device *dev, + struct drm_file *file_priv, + struct drm_mode_fb_cmd2 *mode_cmd); - The final initialization task is output configuration. This involves: - - - Finding and initializing the CRTCs, encoders, and connectors - for the device. - - - Creating an initial configuration. - - - Registering a framebuffer console driver. - - + Frame buffers are abstract memory objects that provide a source of + pixels to scanout to a CRTC. Applications explicitly request the + creation of frame buffers through the DRM_IOCTL_MODE_ADDFB(2) ioctls and + receive an opaque handle that can be passed to the KMS CRTC control, + plane configuration and page flip functions. + + + Frame buffers rely on the underneath memory manager for low-level memory + operations. When creating a frame buffer applications pass a memory + handle (or a list of memory handles for multi-planar formats) through + the drm_mode_fb_cmd2 argument. This document + assumes that the driver uses GEM, those handles thus reference GEM + objects. + + + Drivers must first validate the requested frame buffer parameters passed + through the mode_cmd argument. In particular this is where invalid + sizes, pixel formats or pitches can be caught. + + + If the parameters are deemed valid, drivers then create, initialize and + return an instance of struct drm_framebuffer. + If desired the instance can be embedded in a larger driver-specific + structure. The new instance is initialized with a call to + drm_framebuffer_init which takes a pointer to DRM + frame buffer operations (struct + drm_framebuffer_funcs). Frame buffer operations are + + + int (*create_handle)(struct drm_framebuffer *fb, + struct drm_file *file_priv, unsigned int *handle); + + Create a handle to the frame buffer underlying memory object. If + the frame buffer uses a multi-plane format, the handle will + reference the memory object associated with the first plane. + + + Drivers call drm_gem_handle_create to create + the handle. + + + + void (*destroy)(struct drm_framebuffer *framebuffer); + + Destroy the frame buffer object and frees all associated + resources. Drivers must call + drm_framebuffer_cleanup to free resources + allocated by the DRM core for the frame buffer object, and must + make sure to unreference all memory objects associated with the + frame buffer. Handles created by the + create_handle operation are released by + the DRM core. + + + + int (*dirty)(struct drm_framebuffer *framebuffer, + struct drm_file *file_priv, unsigned flags, unsigned color, + struct drm_clip_rect *clips, unsigned num_clips); + + This optional operation notifies the driver that a region of the + frame buffer has changed in response to a DRM_IOCTL_MODE_DIRTYFB + ioctl call. + + + + + + After initializing the drm_framebuffer + instance drivers must fill its width, + height, pitches, + offsets, depth, + bits_per_pixel and + pixel_format fields from the values passed + through the drm_mode_fb_cmd2 argument. They + should call the drm_helper_mode_fill_fb_struct + helper function to do so. + + + + Output Polling + void (*output_poll_changed)(struct drm_device *dev); + + This operation notifies the driver that the status of one or more + connectors has changed. Drivers that use the fb helper can just call the + drm_fb_helper_hotplug_event function to handle this + operation. + + + + + + + + KMS Initialization and Cleanup + + A KMS device is abstracted and exposed as a set of planes, CRTCs, encoders + and connectors. KMS drivers must thus create and initialize all those + objects at load time after initializing mode setting. + + + CRTCs (struct <structname>drm_crtc</structname>) + + A CRTC is an abstraction representing a part of the chip that contains a + pointer to a scanout buffer. Therefore, the number of CRTCs available + determines how many independent scanout buffers can be active at any + given time. The CRTC structure contains several fields to support this: + a pointer to some video memory (abstracted as a frame buffer object), a + display mode, and an (x, y) offset into the video memory to support + panning or configurations where one piece of video memory spans multiple + CRTCs. - Output discovery and initialization - - Several core functions exist to create CRTCs, encoders, and - connectors, namely: drm_crtc_init(), drm_connector_init(), and - drm_encoder_init(), along with several "helper" functions to - perform common tasks. - - - Connectors should be registered with sysfs once they've been - detected and initialized, using the - drm_sysfs_connector_add() function. Likewise, when they're - removed from the system, they should be destroyed with - drm_sysfs_connector_remove(). - - -CRTC Initialization + + A KMS device must create and register at least one struct + drm_crtc instance. The instance is allocated + and zeroed by the driver, possibly as part of a larger structure, and + registered with a call to drm_crtc_init with a + pointer to CRTC functions. + + + + CRTC Operations + + Set Configuration + int (*set_config)(struct drm_mode_set *set); + + Apply a new CRTC configuration to the device. The configuration + specifies a CRTC, a frame buffer to scan out from, a (x,y) position in + the frame buffer, a display mode and an array of connectors to drive + with the CRTC if possible. + + + If the frame buffer specified in the configuration is NULL, the driver + must detach all encoders connected to the CRTC and all connectors + attached to those encoders and disable them. + + + This operation is called with the mode config lock held. + + + FIXME: How should set_config interact with DPMS? If the CRTC is + suspended, should it be resumed? + + + + Page Flipping + int (*page_flip)(struct drm_crtc *crtc, struct drm_framebuffer *fb, + struct drm_pending_vblank_event *event); + + Schedule a page flip to the given frame buffer for the CRTC. This + operation is called with the mode config mutex held. + + + Page flipping is a synchronization mechanism that replaces the frame + buffer being scanned out by the CRTC with a new frame buffer during + vertical blanking, avoiding tearing. When an application requests a page + flip the DRM core verifies that the new frame buffer is large enough to + be scanned out by the CRTC in the currently configured mode and then + calls the CRTC page_flip operation with a + pointer to the new frame buffer. + + + The page_flip operation schedules a page flip. + Once any pending rendering targetting the new frame buffer has + completed, the CRTC will be reprogrammed to display that frame buffer + after the next vertical refresh. The operation must return immediately + without waiting for rendering or page flip to complete and must block + any new rendering to the frame buffer until the page flip completes. + + + If a page flip is already pending, the + page_flip operation must return + -EBUSY. + + + To synchronize page flip to vertical blanking the driver will likely + need to enable vertical blanking interrupts. It should call + drm_vblank_get for that purpose, and call + drm_vblank_put after the page flip completes. + + + If the application has requested to be notified when page flip completes + the page_flip operation will be called with a + non-NULL event argument pointing to a + drm_pending_vblank_event instance. Upon page + flip completion the driver must fill the + event::event + sequence, tv_sec + and tv_usec fields with the associated + vertical blanking count and timestamp, add the event to the + drm_file list of events to be signaled, and wake + up any waiting process. This can be performed with + event.sequence = drm_vblank_count_and_time(..., &now); + event->event.tv_sec = now.tv_sec; + event->event.tv_usec = now.tv_usec; + + spin_lock_irqsave(&dev->event_lock, flags); + list_add_tail(&event->base.link, &event->base.file_priv->event_list); + wake_up_interruptible(&event->base.file_priv->event_wait); + spin_unlock_irqrestore(&dev->event_lock, flags); + ]]> + + + FIXME: Could drivers that don't need to wait for rendering to complete + just add the event to dev->vblank_event_list and + let the DRM core handle everything, as for "normal" vertical blanking + events? + + + While waiting for the page flip to complete, the + event->base.link list head can be used freely by + the driver to store the pending event in a driver-specific list. + + + If the file handle is closed before the event is signaled, drivers must + take care to destroy the event in their + preclose operation (and, if needed, call + drm_vblank_put). + + + + Miscellaneous + + + void (*gamma_set)(struct drm_crtc *crtc, u16 *r, u16 *g, u16 *b, + uint32_t start, uint32_t size); + + Apply a gamma table to the device. The operation is optional. + + + + void (*destroy)(struct drm_crtc *crtc); + + Destroy the CRTC when not needed anymore. See + . + + + + + + + + Planes (struct <structname>drm_plane</structname>) + + A plane represents an image source that can be blended with or overlayed + on top of a CRTC during the scanout process. Planes are associated with + a frame buffer to crop a portion of the image memory (source) and + optionally scale it to a destination size. The result is then blended + with or overlayed on top of a CRTC. + + + Plane Initialization + + Planes are optional. To create a plane, a KMS drivers allocates and + zeroes an instances of struct drm_plane + (possibly as part of a larger structure) and registers it with a call + to drm_plane_init. The function takes a bitmask + of the CRTCs that can be associated with the plane, a pointer to the + plane functions and a list of format supported formats. + + + + Plane Operations + + + int (*update_plane)(struct drm_plane *plane, struct drm_crtc *crtc, + struct drm_framebuffer *fb, int crtc_x, int crtc_y, + unsigned int crtc_w, unsigned int crtc_h, + uint32_t src_x, uint32_t src_y, + uint32_t src_w, uint32_t src_h); + + Enable and configure the plane to use the given CRTC and frame buffer. + + + The source rectangle in frame buffer memory coordinates is given by + the src_x, src_y, + src_w and src_h + parameters (as 16.16 fixed point values). Devices that don't support + subpixel plane coordinates can ignore the fractional part. + + + The destination rectangle in CRTC coordinates is given by the + crtc_x, crtc_y, + crtc_w and crtc_h + parameters (as integer values). Devices scale the source rectangle to + the destination rectangle. If scaling is not supported, and the source + rectangle size doesn't match the destination rectangle size, the + driver must return a -EINVAL error. + + + + int (*disable_plane)(struct drm_plane *plane); + + Disable the plane. The DRM core calls this method in response to a + DRM_IOCTL_MODE_SETPLANE ioctl call with the frame buffer ID set to 0. + Disabled planes must not be processed by the CRTC. + + + + void (*destroy)(struct drm_plane *plane); + + Destroy the plane when not needed anymore. See + . + + + + + + + Encoders (struct <structname>drm_encoder</structname>) + + An encoder takes pixel data from a CRTC and converts it to a format + suitable for any attached connectors. On some devices, it may be + possible to have a CRTC send data to more than one encoder. In that + case, both encoders would receive data from the same scanout buffer, + resulting in a "cloned" display configuration across the connectors + attached to each encoder. + + + Encoder Initialization + + As for CRTCs, a KMS driver must create, initialize and register at + least one struct drm_encoder instance. The + instance is allocated and zeroed by the driver, possibly as part of a + larger structure. + + + Drivers must initialize the struct drm_encoder + possible_crtcs and + possible_clones fields before registering the + encoder. Both fields are bitmasks of respectively the CRTCs that the + encoder can be connected to, and sibling encoders candidate for cloning. + + + After being initialized, the encoder must be registered with a call to + drm_encoder_init. The function takes a pointer to + the encoder functions and an encoder type. Supported types are + + + DRM_MODE_ENCODER_DAC for VGA and analog on DVI-I/DVI-A + + + DRM_MODE_ENCODER_TMDS for DVI, HDMI and (embedded) DisplayPort + + + DRM_MODE_ENCODER_LVDS for display panels + + + DRM_MODE_ENCODER_TVDAC for TV output (Composite, S-Video, Component, + SCART) + + + DRM_MODE_ENCODER_VIRTUAL for virtual machine displays + + + + + Encoders must be attached to a CRTC to be used. DRM drivers leave + encoders unattached at initialization time. Applications (or the fbdev + compatibility layer when implemented) are responsible for attaching the + encoders they want to use to a CRTC. + + + + Encoder Operations + + + void (*destroy)(struct drm_encoder *encoder); + + Called to destroy the encoder when not needed anymore. See + . + + + + + + + Connectors (struct <structname>drm_connector</structname>) + + A connector is the final destination for pixel data on a device, and + usually connects directly to an external display device like a monitor + or laptop panel. A connector can only be attached to one encoder at a + time. The connector is also the structure where information about the + attached display is kept, so it contains fields for display data, EDID + data, DPMS & connection status, and information about modes + supported on the attached displays. + + + Connector Initialization + + Finally a KMS driver must create, initialize, register and attach at + least one struct drm_connector instance. The + instance is created as other KMS objects and initialized by setting the + following fields. + + + + interlace_allowed + + Whether the connector can handle interlaced modes. + + + + doublescan_allowed + + Whether the connector can handle doublescan. + + + + display_info + + + Display information is filled from EDID information when a display + is detected. For non hot-pluggable displays such as flat panels in + embedded systems, the driver should initialize the + display_info.width_mm + and + display_info.height_mm + fields with the physical size of the display. + + + + polled + + Connector polling mode, a combination of + + + DRM_CONNECTOR_POLL_HPD + + The connector generates hotplug events and doesn't need to be + periodically polled. The CONNECT and DISCONNECT flags must not + be set together with the HPD flag. + + + + DRM_CONNECTOR_POLL_CONNECT + + Periodically poll the connector for connection. + + + + DRM_CONNECTOR_POLL_DISCONNECT + + Periodically poll the connector for disconnection. + + + + Set to 0 for connectors that don't support connection status + discovery. + + + + + The connector is then registered with a call to + drm_connector_init with a pointer to the connector + functions and a connector type, and exposed through sysfs with a call to + drm_sysfs_connector_add. + + + Supported connector types are + + DRM_MODE_CONNECTOR_VGA + DRM_MODE_CONNECTOR_DVII + DRM_MODE_CONNECTOR_DVID + DRM_MODE_CONNECTOR_DVIA + DRM_MODE_CONNECTOR_Composite + DRM_MODE_CONNECTOR_SVIDEO + DRM_MODE_CONNECTOR_LVDS + DRM_MODE_CONNECTOR_Component + DRM_MODE_CONNECTOR_9PinDIN + DRM_MODE_CONNECTOR_DisplayPort + DRM_MODE_CONNECTOR_HDMIA + DRM_MODE_CONNECTOR_HDMIB + DRM_MODE_CONNECTOR_TV + DRM_MODE_CONNECTOR_eDP + DRM_MODE_CONNECTOR_VIRTUAL + + + + Connectors must be attached to an encoder to be used. For devices that + map connectors to encoders 1:1, the connector should be attached at + initialization time with a call to + drm_mode_connector_attach_encoder. The driver must + also set the drm_connector + encoder field to point to the attached + encoder. + + + Finally, drivers must initialize the connectors state change detection + with a call to drm_kms_helper_poll_init. If at + least one connector is pollable but can't generate hotplug interrupts + (indicated by the DRM_CONNECTOR_POLL_CONNECT and + DRM_CONNECTOR_POLL_DISCONNECT connector flags), a delayed work will + automatically be queued to periodically poll for changes. Connectors + that can generate hotplug interrupts must be marked with the + DRM_CONNECTOR_POLL_HPD flag instead, and their interrupt handler must + call drm_helper_hpd_irq_event. The function will + queue a delayed work to check the state of all connectors, but no + periodic polling will be done. + + + + Connector Operations + + Unless otherwise state, all operations are mandatory. + + + DPMS + void (*dpms)(struct drm_connector *connector, int mode); + + The DPMS operation sets the power state of a connector. The mode + argument is one of + + DRM_MODE_DPMS_ON + DRM_MODE_DPMS_STANDBY + DRM_MODE_DPMS_SUSPEND + DRM_MODE_DPMS_OFF + + + + In all but DPMS_ON mode the encoder to which the connector is attached + should put the display in low-power mode by driving its signals + appropriately. If more than one connector is attached to the encoder + care should be taken not to change the power state of other displays as + a side effect. Low-power mode should be propagated to the encoders and + CRTCs when all related connectors are put in low-power mode. + + + + Modes + int (*fill_modes)(struct drm_connector *connector, uint32_t max_width, + uint32_t max_height); + + Fill the mode list with all supported modes for the connector. If the + max_width and max_height + arguments are non-zero, the implementation must ignore all modes wider + than max_width or higher than + max_height. + + + The connector must also fill in this operation its + display_info + width_mm and + height_mm fields with the connected display + physical size in millimeters. The fields should be set to 0 if the value + isn't known or is not applicable (for instance for projector devices). + + + + Connection Status + + The connection status is updated through polling or hotplug events when + supported (see ). The status + value is reported to userspace through ioctls and must not be used + inside the driver, as it only gets initialized by a call to + drm_mode_getconnector from userspace. + + enum drm_connector_status (*detect)(struct drm_connector *connector, + bool force); + + Check to see if anything is attached to the connector. The + force parameter is set to false whilst polling or + to true when checking the connector due to user request. + force can be used by the driver to avoid + expensive, destructive operations during automated probing. + + + Return connector_status_connected if something is connected to the + connector, connector_status_disconnected if nothing is connected and + connector_status_unknown if the connection state isn't known. + + + Drivers should only return connector_status_connected if the connection + status has really been probed as connected. Connectors that can't detect + the connection status, or failed connection status probes, should return + connector_status_unknown. + + + + Miscellaneous + + + void (*destroy)(struct drm_connector *connector); + + Destroy the connector when not needed anymore. See + . + + + + + + + + Cleanup + + The DRM core manages its objects' lifetime. When an object is not needed + anymore the core calls its destroy function, which must clean up and + free every resource allocated for the object. Every + drm_*_init call must be matched with a + corresponding drm_*_cleanup call to cleanup CRTCs + (drm_crtc_cleanup), planes + (drm_plane_cleanup), encoders + (drm_encoder_cleanup) and connectors + (drm_connector_cleanup). Furthermore, connectors + that have been added to sysfs must be removed by a call to + drm_sysfs_connector_remove before calling + drm_connector_cleanup. + + + Connectors state change detection must be cleanup up with a call to + drm_kms_helper_poll_fini. + + + + Output discovery and initialization example + - - - In the example above (again, taken from the i915 driver), a - CRT connector and encoder combination is created. A device-specific - i2c bus is also created for fetching EDID data and - performing monitor detection. Once the process is complete, - the new connector is registered with sysfs to make its - properties available to applications. - - - Helper functions and core functions - - Since many PC-class graphics devices have similar display output - designs, the DRM provides a set of helper functions to make - output management easier. The core helper routines handle - encoder re-routing and the disabling of unused functions following - mode setting. Using the helpers is optional, but recommended for - devices with PC-style architectures (i.e. a set of display planes - for feeding pixels to encoders which are in turn routed to - connectors). Devices with more complex requirements needing - finer grained management may opt to use the core callbacks - directly. - - - [Insert typical diagram here.] [Insert OMAP style config here.] - - - - Each encoder object needs to provide: - - - A DPMS (basically on/off) function. - - - A mode-fixup function (for converting requested modes into - native hardware timings). - - - Functions (prepare, set, and commit) for use by the core DRM - helper functions. - - - Connector helpers need to provide functions (mode-fetch, validity, - and encoder-matching) for returning an ideal encoder for a given - connector. The core connector functions include a DPMS callback, - save/restore routines (deprecated), detection, mode probing, - property handling, and cleanup functions. - - - - - +}]]> + + In the example above (taken from the i915 driver), a CRTC, connector and + encoder combination is created. A device-specific i2c bus is also + created for fetching EDID data and performing monitor detection. Once + the process is complete, the new connector is registered with sysfs to + make its properties available to applications. + - + - VBlank event handling + Mid-layer Helper Functions - The DRM core exposes two vertical blank related ioctls: - - - DRM_IOCTL_WAIT_VBLANK - - - This takes a struct drm_wait_vblank structure as its argument, - and it is used to block or request a signal when a specified - vblank event occurs. - - - - - DRM_IOCTL_MODESET_CTL - - - This should be called by application level drivers before and - after mode setting, since on many devices the vertical blank - counter is reset at that time. Internally, the DRM snapshots - the last vblank count when the ioctl is called with the - _DRM_PRE_MODESET command, so that the counter won't go backwards - (which is dealt with when _DRM_POST_MODESET is used). - - - - - + The CRTC, encoder and connector functions provided by the drivers + implement the DRM API. They're called by the DRM core and ioctl handlers + to handle device state changes and configuration request. As implementing + those functions often requires logic not specific to drivers, mid-layer + helper functions are available to avoid duplicating boilerplate code. + + + The DRM core contains one mid-layer implementation. The mid-layer provides + implementations of several CRTC, encoder and connector functions (called + from the top of the mid-layer) that pre-process requests and call + lower-level functions provided by the driver (at the bottom of the + mid-layer). For instance, the + drm_crtc_helper_set_config function can be used to + fill the struct drm_crtc_funcs + set_config field. When called, it will split + the set_config operation in smaller, simpler + operations and call the driver to handle them. - To support the functions above, the DRM core provides several - helper functions for tracking vertical blank counters, and - requires drivers to provide several callbacks: - get_vblank_counter(), enable_vblank() and disable_vblank(). The - core uses get_vblank_counter() to keep the counter accurate - across interrupt disable periods. It should return the current - vertical blank event count, which is often tracked in a device - register. The enable and disable vblank callbacks should enable - and disable vertical blank interrupts, respectively. In the - absence of DRM clients waiting on vblank events, the core DRM - code uses the disable_vblank() function to disable - interrupts, which saves power. They are re-enabled again when - a client calls the vblank wait ioctl above. + To use the mid-layer, drivers call drm_crtc_helper_add, + drm_encoder_helper_add and + drm_connector_helper_add functions to install their + mid-layer bottom operations handlers, and fill the + drm_crtc_funcs, + drm_encoder_funcs and + drm_connector_funcs structures with pointers to + the mid-layer top API functions. Installing the mid-layer bottom operation + handlers is best done right after registering the corresponding KMS object. - A device that doesn't provide a count register may simply use an - internal atomic counter incremented on every vertical blank - interrupt (and then treat the enable_vblank() and disable_vblank() - callbacks as no-ops). + The mid-layer is not split between CRTC, encoder and connector operations. + To use it, a driver must provide bottom functions for all of the three KMS + entities. + + Helper Functions + + + int drm_crtc_helper_set_config(struct drm_mode_set *set); + + The drm_crtc_helper_set_config helper function + is a CRTC set_config implementation. It + first tries to locate the best encoder for each connector by calling + the connector best_encoder helper + operation. + + + After locating the appropriate encoders, the helper function will + call the mode_fixup encoder and CRTC helper + operations to adjust the requested mode, or reject it completely in + which case an error will be returned to the application. If the new + configuration after mode adjustment is identical to the current + configuration the helper function will return without performing any + other operation. + + + If the adjusted mode is identical to the current mode but changes to + the frame buffer need to be applied, the + drm_crtc_helper_set_config function will call + the CRTC mode_set_base helper operation. If + the adjusted mode differs from the current mode, or if the + mode_set_base helper operation is not + provided, the helper function performs a full mode set sequence by + calling the prepare, + mode_set and + commit CRTC and encoder helper operations, + in that order. + + + + void drm_helper_connector_dpms(struct drm_connector *connector, int mode); + + The drm_helper_connector_dpms helper function + is a connector dpms implementation that + tracks power state of connectors. To use the function, drivers must + provide dpms helper operations for CRTCs + and encoders to apply the DPMS state to the device. + + + The mid-layer doesn't track the power state of CRTCs and encoders. + The dpms helper operations can thus be + called with a mode identical to the currently active mode. + + + + int drm_helper_probe_single_connector_modes(struct drm_connector *connector, + uint32_t maxX, uint32_t maxY); + + The drm_helper_probe_single_connector_modes helper + function is a connector fill_modes + implementation that updates the connection status for the connector + and then retrieves a list of modes by calling the connector + get_modes helper operation. + + + The function filters out modes larger than + max_width and max_height + if specified. It then calls the connector + mode_valid helper operation for each mode in + the probed list to check whether the mode is valid for the connector. + + + + + + CRTC Helper Operations + + + bool (*mode_fixup)(struct drm_crtc *crtc, + const struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode); + + Let CRTCs adjust the requested mode or reject it completely. This + operation returns true if the mode is accepted (possibly after being + adjusted) or false if it is rejected. + + + The mode_fixup operation should reject the + mode if it can't reasonably use it. The definition of "reasonable" + is currently fuzzy in this context. One possible behaviour would be + to set the adjusted mode to the panel timings when a fixed-mode + panel is used with hardware capable of scaling. Another behaviour + would be to accept any input mode and adjust it to the closest mode + supported by the hardware (FIXME: This needs to be clarified). + + + + int (*mode_set_base)(struct drm_crtc *crtc, int x, int y, + struct drm_framebuffer *old_fb) + + Move the CRTC on the current frame buffer (stored in + crtc->fb) to position (x,y). Any of the frame + buffer, x position or y position may have been modified. + + + This helper operation is optional. If not provided, the + drm_crtc_helper_set_config function will fall + back to the mode_set helper operation. + + + FIXME: Why are x and y passed as arguments, as they can be accessed + through crtc->x and + crtc->y? + + + + void (*prepare)(struct drm_crtc *crtc); + + Prepare the CRTC for mode setting. This operation is called after + validating the requested mode. Drivers use it to perform + device-specific operations required before setting the new mode. + + + + int (*mode_set)(struct drm_crtc *crtc, struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode, int x, int y, + struct drm_framebuffer *old_fb); + + Set a new mode, position and frame buffer. Depending on the device + requirements, the mode can be stored internally by the driver and + applied in the commit operation, or + programmed to the hardware immediately. + + + The mode_set operation returns 0 on success + or a negative error code if an error occurs. + + + + void (*commit)(struct drm_crtc *crtc); + + Commit a mode. This operation is called after setting the new mode. + Upon return the device must use the new mode and be fully + operational. + + + + + + Encoder Helper Operations + + + bool (*mode_fixup)(struct drm_encoder *encoder, + const struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode); + + FIXME: The mode argument be const, but the i915 driver modifies + mode->clock in intel_dp_mode_fixup. + + + Let encoders adjust the requested mode or reject it completely. This + operation returns true if the mode is accepted (possibly after being + adjusted) or false if it is rejected. See the + mode_fixup CRTC helper + operation for an explanation of the allowed adjustments. + + + + void (*prepare)(struct drm_encoder *encoder); + + Prepare the encoder for mode setting. This operation is called after + validating the requested mode. Drivers use it to perform + device-specific operations required before setting the new mode. + + + + void (*mode_set)(struct drm_encoder *encoder, + struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode); + + Set a new mode. Depending on the device requirements, the mode can + be stored internally by the driver and applied in the + commit operation, or programmed to the + hardware immediately. + + + + void (*commit)(struct drm_encoder *encoder); + + Commit a mode. This operation is called after setting the new mode. + Upon return the device must use the new mode and be fully + operational. + + + + + + Connector Helper Operations + + + struct drm_encoder *(*best_encoder)(struct drm_connector *connector); + + Return a pointer to the best encoder for the connecter. Device that + map connectors to encoders 1:1 simply return the pointer to the + associated encoder. This operation is mandatory. + + + + int (*get_modes)(struct drm_connector *connector); + + Fill the connector's probed_modes list + by parsing EDID data with drm_add_edid_modes or + calling drm_mode_probed_add directly for every + supported mode and return the number of modes it has detected. This + operation is mandatory. + + + When adding modes manually the driver creates each mode with a call to + drm_mode_create and must fill the following fields. + + + __u32 type; + + Mode type bitmask, a combination of + + + DRM_MODE_TYPE_BUILTIN + not used? + + + DRM_MODE_TYPE_CLOCK_C + not used? + + + DRM_MODE_TYPE_CRTC_C + not used? + + + + DRM_MODE_TYPE_PREFERRED - The preferred mode for the connector + + + not used? + + + + DRM_MODE_TYPE_DEFAULT + not used? + + + DRM_MODE_TYPE_USERDEF + not used? + + + DRM_MODE_TYPE_DRIVER + + + The mode has been created by the driver (as opposed to + to user-created modes). + + + + + Drivers must set the DRM_MODE_TYPE_DRIVER bit for all modes they + create, and set the DRM_MODE_TYPE_PREFERRED bit for the preferred + mode. + + + + __u32 clock; + Pixel clock frequency in kHz unit + + + __u16 hdisplay, hsync_start, hsync_end, htotal; + __u16 vdisplay, vsync_start, vsync_end, vtotal; + Horizontal and vertical timing information + <----------------><-------------><--------------> + + //////////////////////| + ////////////////////// | + ////////////////////// |.................. ................ + _______________ + + <----- [hv]display -----> + <------------- [hv]sync_start ------------> + <--------------------- [hv]sync_end ---------------------> + <-------------------------------- [hv]total -----------------------------> +]]> + + + __u16 hskew; + __u16 vscan; + Unknown + + + __u32 flags; + + Mode flags, a combination of + + + DRM_MODE_FLAG_PHSYNC + + Horizontal sync is active high + + + + DRM_MODE_FLAG_NHSYNC + + Horizontal sync is active low + + + + DRM_MODE_FLAG_PVSYNC + + Vertical sync is active high + + + + DRM_MODE_FLAG_NVSYNC + + Vertical sync is active low + + + + DRM_MODE_FLAG_INTERLACE + + Mode is interlaced + + + + DRM_MODE_FLAG_DBLSCAN + + Mode uses doublescan + + + + DRM_MODE_FLAG_CSYNC + + Mode uses composite sync + + + + DRM_MODE_FLAG_PCSYNC + + Composite sync is active high + + + + DRM_MODE_FLAG_NCSYNC + + Composite sync is active low + + + + DRM_MODE_FLAG_HSKEW + + hskew provided (not used?) + + + + DRM_MODE_FLAG_BCAST + + not used? + + + + DRM_MODE_FLAG_PIXMUX + + not used? + + + + DRM_MODE_FLAG_DBLCLK + + not used? + + + + DRM_MODE_FLAG_CLKDIV2 + + ? + + + + + + Note that modes marked with the INTERLACE or DBLSCAN flags will be + filtered out by + drm_helper_probe_single_connector_modes if + the connector's interlace_allowed or + doublescan_allowed field is set to 0. + + + + char name[DRM_DISPLAY_MODE_LEN]; + + Mode name. The driver must call + drm_mode_set_name to fill the mode name from + hdisplay, + vdisplay and interlace flag after + filling the corresponding fields. + + + + + + The vrefresh value is computed by + drm_helper_probe_single_connector_modes. + + + When parsing EDID data, drm_add_edid_modes fill the + connector display_info + width_mm and + height_mm fields. When creating modes + manually the get_modes helper operation must + set the display_info + width_mm and + height_mm fields if they haven't been set + already (for instance at initilization time when a fixed-size panel is + attached to the connector). The mode width_mm + and height_mm fields are only used internally + during EDID parsing and should not be set when creating modes manually. + + + + int (*mode_valid)(struct drm_connector *connector, + struct drm_display_mode *mode); + + Verify whether a mode is valid for the connector. Return MODE_OK for + supported modes and one of the enum drm_mode_status values (MODE_*) + for unsupported modes. This operation is mandatory. + + + As the mode rejection reason is currently not used beside for + immediately removing the unsupported mode, an implementation can + return MODE_BAD regardless of the exact reason why the mode is not + valid. + + + Note that the mode_valid helper operation is + only called for modes detected by the device, and + not for modes set by the user through the CRTC + set_config operation. + + + + - - Memory management + + + + Vertical Blanking + + Vertical blanking plays a major role in graphics rendering. To achieve + tear-free display, users must synchronize page flips and/or rendering to + vertical blanking. The DRM API offers ioctls to perform page flips + synchronized to vertical blanking and wait for vertical blanking. + + + The DRM core handles most of the vertical blanking management logic, which + involves filtering out spurious interrupts, keeping race-free blanking + counters, coping with counter wrap-around and resets and keeping use + counts. It relies on the driver to generate vertical blanking interrupts + and optionally provide a hardware vertical blanking counter. Drivers must + implement the following operations. + + + + int (*enable_vblank) (struct drm_device *dev, int crtc); +void (*disable_vblank) (struct drm_device *dev, int crtc); + + Enable or disable vertical blanking interrupts for the given CRTC. + + + + u32 (*get_vblank_counter) (struct drm_device *dev, int crtc); + + Retrieve the value of the vertical blanking counter for the given + CRTC. If the hardware maintains a vertical blanking counter its value + should be returned. Otherwise drivers can use the + drm_vblank_count helper function to handle this + operation. + + + - The memory manager lies at the heart of many DRM operations; it - is required to support advanced client features like OpenGL - pbuffers. The DRM currently contains two memory managers: TTM - and GEM. + Drivers must initialize the vertical blanking handling core with a call to + drm_vblank_init in their + load operation. The function will set the struct + drm_device + vblank_disable_allowed field to 0. This will + keep vertical blanking interrupts enabled permanently until the first mode + set operation, where vblank_disable_allowed is + set to 1. The reason behind this is not clear. Drivers can set the field + to 1 after calling drm_vblank_init to make vertical + blanking interrupts dynamically managed from the beginning. + + Vertical blanking interrupts can be enabled by the DRM core or by drivers + themselves (for instance to handle page flipping operations). The DRM core + maintains a vertical blanking use count to ensure that the interrupts are + not disabled while a user still needs them. To increment the use count, + drivers call drm_vblank_get. Upon return vertical + blanking interrupts are guaranteed to be enabled. + + + To decrement the use count drivers call + drm_vblank_put. Only when the use count drops to zero + will the DRM core disable the vertical blanking interrupts after a delay + by scheduling a timer. The delay is accessible through the vblankoffdelay + module parameter or the drm_vblank_offdelay global + variable and expressed in milliseconds. Its default value is 5000 ms. + + + When a vertical blanking interrupt occurs drivers only need to call the + drm_handle_vblank function to account for the + interrupt. + + + Resources allocated by drm_vblank_init must be freed + with a call to drm_vblank_cleanup in the driver + unload operation handler. + + + + + + Open/Close, File Operations and IOCTLs - The Translation Table Manager (TTM) + Open and Close + int (*firstopen) (struct drm_device *); +void (*lastclose) (struct drm_device *); +int (*open) (struct drm_device *, struct drm_file *); +void (*preclose) (struct drm_device *, struct drm_file *); +void (*postclose) (struct drm_device *, struct drm_file *); + Open and close handlers. None of those methods are mandatory. + - TTM was developed by Tungsten Graphics, primarily by Thomas - Hellström, and is intended to be a flexible, high performance - graphics memory manager. + The firstopen method is called by the DRM core + when an application opens a device that has no other opened file handle. + Similarly the lastclose method is called when + the last application holding a file handle opened on the device closes + it. Both methods are mostly used for UMS (User Mode Setting) drivers to + acquire and release device resources which should be done in the + load and unload + methods for KMS drivers. - Drivers wishing to support TTM must fill out a drm_bo_driver - structure. + Note that the lastclose method is also called + at module unload time or, for hot-pluggable devices, when the device is + unplugged. The firstopen and + lastclose calls can thus be unbalanced. - TTM design background and information belongs here. + The open method is called every time the device + is opened by an application. Drivers can allocate per-file private data + in this method and store them in the struct + drm_file driver_priv + field. Note that the open method is called + before firstopen. + + + The close operation is split into preclose and + postclose methods. Drivers must stop and + cleanup all per-file operations in the preclose + method. For instance pending vertical blanking and page flip events must + be cancelled. No per-file operation is allowed on the file handle after + returning from the preclose method. + + + Finally the postclose method is called as the + last step of the close operation, right before calling the + lastclose method if no other open file handle + exists for the device. Drivers that have allocated per-file private data + in the open method should free it here. + + + The lastclose method should restore CRTC and + plane properties to default value, so that a subsequent open of the + device will not inherit state from the previous user. - - The Graphics Execution Manager (GEM) + File Operations + const struct file_operations *fops + File operations for the DRM device node. - GEM is an Intel project, authored by Eric Anholt and Keith - Packard. It provides simpler interfaces than TTM, and is well - suited for UMA devices. + Drivers must define the file operations structure that forms the DRM + userspace API entry point, even though most of those operations are + implemented in the DRM core. The open, + release and ioctl + operations are handled by + + .owner = THIS_MODULE, + .open = drm_open, + .release = drm_release, + .unlocked_ioctl = drm_ioctl, + #ifdef CONFIG_COMPAT + .compat_ioctl = drm_compat_ioctl, + #endif + - GEM-enabled drivers must provide gem_init_object() and - gem_free_object() callbacks to support the core memory - allocation routines. They should also provide several driver-specific - ioctls to support command execution, pinning, buffer - read & write, mapping, and domain ownership transfers. + Drivers that implement private ioctls that requires 32/64bit + compatibility support must provide their own + compat_ioctl handler that processes private + ioctls and calls drm_compat_ioctl for core ioctls. - On a fundamental level, GEM involves several operations: - - Memory allocation and freeing - Command execution - Aperture management at command execution time - - Buffer object allocation is relatively - straightforward and largely provided by Linux's shmem layer, which - provides memory to back each object. When mapped into the GTT - or used in a command buffer, the backing pages for an object are - flushed to memory and marked write combined so as to be coherent - with the GPU. Likewise, if the CPU accesses an object after the GPU - has finished rendering to the object, then the object must be made - coherent with the CPU's view - of memory, usually involving GPU cache flushing of various kinds. - This core CPU<->GPU coherency management is provided by a - device-specific ioctl, which evaluates an object's current domain and - performs any necessary flushing or synchronization to put the object - into the desired coherency domain (note that the object may be busy, - i.e. an active render target; in that case, setting the domain - blocks the client and waits for rendering to complete before - performing any necessary flushing operations). - - - Perhaps the most important GEM function is providing a command - execution interface to clients. Client programs construct command - buffers containing references to previously allocated memory objects, - and then submit them to GEM. At that point, GEM takes care to bind - all the objects into the GTT, execute the buffer, and provide - necessary synchronization between clients accessing the same buffers. - This often involves evicting some objects from the GTT and re-binding - others (a fairly expensive operation), and providing relocation - support which hides fixed GTT offsets from clients. Clients must - take care not to submit command buffers that reference more objects - than can fit in the GTT; otherwise, GEM will reject them and no rendering - will occur. Similarly, if several objects in the buffer require - fence registers to be allocated for correct rendering (e.g. 2D blits - on pre-965 chips), care must be taken not to require more fence - registers than are available to the client. Such resource management - should be abstracted from the client in libdrm. + The read and poll + operations provide support for reading DRM events and polling them. They + are implemented by + + .poll = drm_poll, + .read = drm_read, + .fasync = drm_fasync, + .llseek = no_llseek, + + + + The memory mapping implementation varies depending on how the driver + manages memory. Pre-GEM drivers will use drm_mmap, + while GEM-aware drivers will use drm_gem_mmap. See + . + + .mmap = drm_gem_mmap, + + + + No other file operation is supported by the DRM API. + + + + IOCTLs + struct drm_ioctl_desc *ioctls; +int num_ioctls; + Driver-specific ioctls descriptors table. + + Driver-specific ioctls numbers start at DRM_COMMAND_BASE. The ioctls + descriptors table is indexed by the ioctl number offset from the base + value. Drivers can use the DRM_IOCTL_DEF_DRV() macro to initialize the + table entries. + + + DRM_IOCTL_DEF_DRV(ioctl, func, flags) + + ioctl is the ioctl name. Drivers must define + the DRM_##ioctl and DRM_IOCTL_##ioctl macros to the ioctl number + offset from DRM_COMMAND_BASE and the ioctl number respectively. The + first macro is private to the device while the second must be exposed + to userspace in a public header. + + + func is a pointer to the ioctl handler function + compatible with the drm_ioctl_t type. + typedef int drm_ioctl_t(struct drm_device *dev, void *data, + struct drm_file *file_priv); + + + flags is a bitmask combination of the following + values. It restricts how the ioctl is allowed to be called. + + + DRM_AUTH - Only authenticated callers allowed + + + DRM_MASTER - The ioctl can only be called on the master file + handle + + + DRM_ROOT_ONLY - Only callers with the SYSADMIN capability allowed + + + DRM_CONTROL_ALLOW - The ioctl can only be called on a control + device + + + DRM_UNLOCKED - The ioctl handler will be called without locking + the DRM global mutex + + + - - - - - - Output management - - At the core of the DRM output management code is a set of - structures representing CRTCs, encoders, and connectors. - - - A CRTC is an abstraction representing a part of the chip that - contains a pointer to a scanout buffer. Therefore, the number - of CRTCs available determines how many independent scanout - buffers can be active at any given time. The CRTC structure - contains several fields to support this: a pointer to some video - memory, a display mode, and an (x, y) offset into the video - memory to support panning or configurations where one piece of - video memory spans multiple CRTCs. - - - An encoder takes pixel data from a CRTC and converts it to a - format suitable for any attached connectors. On some devices, - it may be possible to have a CRTC send data to more than one - encoder. In that case, both encoders would receive data from - the same scanout buffer, resulting in a "cloned" display - configuration across the connectors attached to each encoder. - - - A connector is the final destination for pixel data on a device, - and usually connects directly to an external display device like - a monitor or laptop panel. A connector can only be attached to - one encoder at a time. The connector is also the structure - where information about the attached display is kept, so it - contains fields for display data, EDID data, DPMS & - connection status, and information about modes supported on the - attached displays. - - - - - - Framebuffer management - - Clients need to provide a framebuffer object which provides a source - of pixels for a CRTC to deliver to the encoder(s) and ultimately the - connector(s). A framebuffer is fundamentally a driver-specific memory - object, made into an opaque handle by the DRM's addfb() function. - Once a framebuffer has been created this way, it may be passed to the - KMS mode setting routines for use in a completed configuration. - @@ -812,15 +2355,24 @@ void intel_crt_init(struct drm_device *dev) + + - Suspend/resume + Suspend/Resume + + The DRM core provides some suspend/resume code, but drivers wanting full + suspend/resume support should provide save() and restore() functions. + These are called at suspend, hibernate, or resume time, and should perform + any state save or restore required by your device across suspend or + hibernate states. + + int (*suspend) (struct drm_device *, pm_message_t state); +int (*resume) (struct drm_device *); - The DRM core provides some suspend/resume code, but drivers - wanting full suspend/resume support should provide save() and - restore() functions. These are called at suspend, - hibernate, or resume time, and should perform any state save or - restore required by your device across suspend or hibernate - states. + Those are legacy suspend and resume methods. New driver should use the + power management interface provided by their bus type (usually through + the struct device_driver dev_pm_ops) and set + these methods to NULL. @@ -833,6 +2385,35 @@ void intel_crt_init(struct drm_device *dev) + + @@ -853,6 +2434,42 @@ void intel_crt_init(struct drm_device *dev) Cover generic ioctls and sysfs layout here. We only need high-level info, since man pages should cover the rest. + + + + + VBlank event handling + + The DRM core exposes two vertical blank related ioctls: + + + DRM_IOCTL_WAIT_VBLANK + + + This takes a struct drm_wait_vblank structure as its argument, + and it is used to block or request a signal when a specified + vblank event occurs. + + + + + DRM_IOCTL_MODESET_CTL + + + This should be called by application level drivers before and + after mode setting, since on many devices the vertical blank + counter is reset at that time. Internally, the DRM snapshots + the last vblank count when the ioctl is called with the + _DRM_PRE_MODESET command, so that the counter won't go backwards + (which is dealt with when _DRM_POST_MODESET is used). + + + + + + + + -- 2.34.1