From 9e1dde33876ba83ad586c336647fff133d0f5472 Mon Sep 17 00:00:00 2001 From: =?utf8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Fri, 12 Nov 2010 16:40:06 +0100 Subject: [PATCH] ARM: mx3: dynamically allocate fsl-usb2-udc devices MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Transfer-Encoding: 8bit While adapting the #defines for this I noticed that the offset used for USB HS on i.MX35 differs from the documented offset. I kept the working offset and commented that the documentation differs. Signed-off-by: Uwe Kleine-König --- arch/arm/mach-mx3/Kconfig | 9 +++- arch/arm/mach-mx3/devices-imx31.h | 4 ++ arch/arm/mach-mx3/devices-imx35.h | 4 ++ arch/arm/mach-mx3/devices.c | 52 +++++++------------ arch/arm/mach-mx3/devices.h | 1 - arch/arm/mach-mx3/mach-cpuimx35.c | 5 +- arch/arm/mach-mx3/mach-mx31_3ds.c | 5 +- arch/arm/mach-mx3/mach-mx35_3ds.c | 5 +- arch/arm/mach-mx3/mach-pcm037.c | 5 +- arch/arm/mach-mx3/mach-pcm043.c | 5 +- arch/arm/mach-mx3/mx31moboard-devboard.c | 5 +- arch/arm/mach-mx3/mx31moboard-marxbot.c | 5 +- arch/arm/mach-mx3/mx31moboard-smartbot.c | 5 +- .../plat-mxc/devices/platform-fsl-usb2-udc.c | 10 ++++ arch/arm/plat-mxc/include/mach/mx31.h | 12 +++-- arch/arm/plat-mxc/include/mach/mx35.h | 14 +++-- 16 files changed, 78 insertions(+), 68 deletions(-) diff --git a/arch/arm/mach-mx3/Kconfig b/arch/arm/mach-mx3/Kconfig index 17ae7d365729..120add4b7bb9 100644 --- a/arch/arm/mach-mx3/Kconfig +++ b/arch/arm/mach-mx3/Kconfig @@ -50,6 +50,7 @@ config MACH_MX31ADS_WM1133_EV1 config MACH_PCM037 bool "Support Phytec pcm037 (i.MX31) platforms" select SOC_IMX31 + select IMX_HAVE_PLATFORM_FSL_USB2_UDC select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_MXC_MMC @@ -85,6 +86,7 @@ config MACH_MX31_3DS bool "Support MX31PDK (3DS)" select SOC_IMX31 select MXC_DEBUG_BOARD + select IMX_HAVE_PLATFORM_FSL_USB2_UDC select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_MXC_NAND select IMX_HAVE_PLATFORM_SPI_IMX @@ -104,6 +106,7 @@ config MACH_MX31_3DS_MXC_NAND_USE_BBT config MACH_MX31MOBOARD bool "Support mx31moboard platforms (EPFL Mobots group)" select SOC_IMX31 + select IMX_HAVE_PLATFORM_FSL_USB2_UDC select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_MXC_MMC @@ -135,6 +138,7 @@ config MACH_QONG config MACH_PCM043 bool "Support Phytec pcm043 (i.MX35) platforms" select SOC_IMX35 + select IMX_HAVE_PLATFORM_FSL_USB2_UDC select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_IMX_SSI select IMX_HAVE_PLATFORM_IMX_UART @@ -162,10 +166,10 @@ config MACH_MX35_3DS bool "Support MX35PDK platform" select SOC_IMX35 select MXC_DEBUG_BOARD + select IMX_HAVE_PLATFORM_ESDHC + select IMX_HAVE_PLATFORM_FSL_USB2_UDC select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_MXC_NAND - select IMX_HAVE_PLATFORM_ESDHC - default n help Include support for MX35PDK platform. This includes specific configurations for the board and its peripherals. @@ -181,6 +185,7 @@ config MACH_KZM_ARM11_01 config MACH_EUKREA_CPUIMX35 bool "Support Eukrea CPUIMX35 Platform" select SOC_IMX35 + select IMX_HAVE_PLATFORM_FSL_USB2_UDC select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_MXC_NAND diff --git a/arch/arm/mach-mx3/devices-imx31.h b/arch/arm/mach-mx3/devices-imx31.h index 875e26f6cc77..0cefaca5d13d 100644 --- a/arch/arm/mach-mx3/devices-imx31.h +++ b/arch/arm/mach-mx3/devices-imx31.h @@ -9,6 +9,10 @@ #include #include +extern const struct imx_fsl_usb2_udc_data imx31_fsl_usb2_udc_data __initconst; +#define imx31_add_fsl_usb2_udc(pdata) \ + imx_add_fsl_usb2_udc(&imx31_fsl_usb2_udc_data, pdata) + extern const struct imx_imx_i2c_data imx31_imx_i2c_data[] __initconst; #define imx31_add_imx_i2c(id, pdata) \ imx_add_imx_i2c(&imx31_imx_i2c_data[id], pdata) diff --git a/arch/arm/mach-mx3/devices-imx35.h b/arch/arm/mach-mx3/devices-imx35.h index a71ce68af9a1..36561ccdfbd6 100644 --- a/arch/arm/mach-mx3/devices-imx35.h +++ b/arch/arm/mach-mx3/devices-imx35.h @@ -13,6 +13,10 @@ extern const struct imx_fec_data imx35_fec_data __initconst; #define imx35_add_fec(pdata) \ imx_add_fec(&imx35_fec_data, pdata) +extern const struct imx_fsl_usb2_udc_data imx35_fsl_usb2_udc_data __initconst; +#define imx35_add_fsl_usb2_udc(pdata) \ + imx_add_fsl_usb2_udc(&imx35_fsl_usb2_udc_data, pdata) + extern const struct imx_flexcan_data imx35_flexcan_data[] __initconst; #define imx35_add_flexcan(id, pdata) \ imx_add_flexcan(&imx35_flexcan_data[id], pdata) diff --git a/arch/arm/mach-mx3/devices.c b/arch/arm/mach-mx3/devices.c index 202c06c552b2..3f859ae8b850 100644 --- a/arch/arm/mach-mx3/devices.c +++ b/arch/arm/mach-mx3/devices.c @@ -97,30 +97,18 @@ struct platform_device mx3_camera = { static struct resource otg_resources[] = { { - .start = MX31_OTG_BASE_ADDR, - .end = MX31_OTG_BASE_ADDR + 0x1ff, + .start = MX31_USB_OTG_BASE_ADDR, + .end = MX31_USB_OTG_BASE_ADDR + 0x1ff, .flags = IORESOURCE_MEM, }, { - .start = MX31_INT_USB3, - .end = MX31_INT_USB3, + .start = MX31_INT_USB_OTG, + .end = MX31_INT_USB_OTG, .flags = IORESOURCE_IRQ, }, }; static u64 otg_dmamask = DMA_BIT_MASK(32); -/* OTG gadget device */ -struct platform_device mxc_otg_udc_device = { - .name = "fsl-usb2-udc", - .id = -1, - .dev = { - .dma_mask = &otg_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .resource = otg_resources, - .num_resources = ARRAY_SIZE(otg_resources), -}; - /* OTG host */ struct platform_device mxc_otg_host = { .name = "mxc-ehci", @@ -139,12 +127,12 @@ static u64 usbh1_dmamask = ~(u32)0; static struct resource mxc_usbh1_resources[] = { { - .start = MX31_OTG_BASE_ADDR + 0x200, - .end = MX31_OTG_BASE_ADDR + 0x3ff, + .start = MX31_USB_HS1_BASE_ADDR, + .end = MX31_USB_HS1_BASE_ADDR + 0x1ff, .flags = IORESOURCE_MEM, }, { - .start = MX31_INT_USB1, - .end = MX31_INT_USB1, + .start = MX31_INT_USB_HS1, + .end = MX31_INT_USB_HS1, .flags = IORESOURCE_IRQ, }, }; @@ -166,12 +154,12 @@ static u64 usbh2_dmamask = ~(u32)0; static struct resource mxc_usbh2_resources[] = { { - .start = MX31_OTG_BASE_ADDR + 0x400, - .end = MX31_OTG_BASE_ADDR + 0x5ff, + .start = MX31_USB_HS2_BASE_ADDR, + .end = MX31_USB_HS2_BASE_ADDR + 0x1ff, .flags = IORESOURCE_MEM, }, { - .start = MX31_INT_USB2, - .end = MX31_INT_USB2, + .start = MX31_INT_USB_HS2, + .end = MX31_INT_USB_HS2, .flags = IORESOURCE_IRQ, }, }; @@ -249,14 +237,14 @@ static int __init mx3_devices_init(void) #endif #if defined(CONFIG_ARCH_MX35) if (cpu_is_mx35()) { - otg_resources[0].start = MX35_OTG_BASE_ADDR; - otg_resources[0].end = MX35_OTG_BASE_ADDR + 0x1ff; - otg_resources[1].start = MX35_INT_USBOTG; - otg_resources[1].end = MX35_INT_USBOTG; - mxc_usbh1_resources[0].start = MX35_OTG_BASE_ADDR + 0x400; - mxc_usbh1_resources[0].end = MX35_OTG_BASE_ADDR + 0x5ff; - mxc_usbh1_resources[1].start = MX35_INT_USBHS; - mxc_usbh1_resources[1].end = MX35_INT_USBHS; + otg_resources[0].start = MX35_USB_OTG_BASE_ADDR; + otg_resources[0].end = MX35_USB_OTG_BASE_ADDR + 0x1ff; + otg_resources[1].start = MX35_INT_USB_OTG; + otg_resources[1].end = MX35_INT_USB_OTG; + mxc_usbh1_resources[0].start = MX35_USB_HS_BASE_ADDR; + mxc_usbh1_resources[0].end = MX35_USB_HS_BASE_ADDR + 0x1ff; + mxc_usbh1_resources[1].start = MX35_INT_USB_HS; + mxc_usbh1_resources[1].end = MX35_INT_USB_HS; imx_wdt_resources[0].start = MX35_WDOG_BASE_ADDR; imx_wdt_resources[0].end = MX35_WDOG_BASE_ADDR + 0x3fff; } diff --git a/arch/arm/mach-mx3/devices.h b/arch/arm/mach-mx3/devices.h index d472c459238c..eb3b990f60ff 100644 --- a/arch/arm/mach-mx3/devices.h +++ b/arch/arm/mach-mx3/devices.h @@ -1,7 +1,6 @@ extern struct platform_device mx3_ipu; extern struct platform_device mx3_fb; extern struct platform_device mx3_camera; -extern struct platform_device mxc_otg_udc_device; extern struct platform_device mxc_otg_host; extern struct platform_device mxc_usbh1; extern struct platform_device mxc_usbh2; diff --git a/arch/arm/mach-mx3/mach-cpuimx35.c b/arch/arm/mach-mx3/mach-cpuimx35.c index 9fde873f5889..b8b619a0e07c 100644 --- a/arch/arm/mach-mx3/mach-cpuimx35.c +++ b/arch/arm/mach-mx3/mach-cpuimx35.c @@ -30,7 +30,6 @@ #include #include #include -#include #include #include @@ -128,7 +127,7 @@ static struct mxc_usbh_platform_data __maybe_unused usbh1_pdata = { MXC_EHCI_IPPUE_DOWN, }; -static struct fsl_usb2_platform_data otg_device_pdata = { +static const struct fsl_usb2_platform_data otg_device_pdata __initconst = { .operating_mode = FSL_USB2_DR_DEVICE, .phy_mode = FSL_USB2_PHY_UTMI, .workaround = FLS_USB2_WORKAROUND_ENGCM09152, @@ -170,7 +169,7 @@ static void __init mxc_board_init(void) if (otg_mode_host) mxc_register_device(&mxc_otg_host, &otg_pdata); else - mxc_register_device(&mxc_otg_udc_device, &otg_device_pdata); + imx35_add_fsl_usb2_udc(&otg_device_pdata); mxc_register_device(&mxc_usbh1, &usbh1_pdata); diff --git a/arch/arm/mach-mx3/mach-mx31_3ds.c b/arch/arm/mach-mx3/mach-mx31_3ds.c index 0ad9e7821082..1b46f738b310 100644 --- a/arch/arm/mach-mx3/mach-mx31_3ds.c +++ b/arch/arm/mach-mx3/mach-mx31_3ds.c @@ -22,7 +22,6 @@ #include #include #include -#include #include #include @@ -214,7 +213,7 @@ usbotg_free_reset: return err; } -static struct fsl_usb2_platform_data usbotg_pdata = { +static const struct fsl_usb2_platform_data usbotg_pdata __initconst = { .operating_mode = FSL_USB2_DR_DEVICE, .phy_mode = FSL_USB2_PHY_ULPI, }; @@ -249,7 +248,7 @@ static void __init mxc_board_init(void) mxc_register_device(&imx_kpp_device, &mx31_3ds_keymap_data); mx31_3ds_usbotg_init(); - mxc_register_device(&mxc_otg_udc_device, &usbotg_pdata); + imx31_add_fsl_usb2_udc(&usbotg_pdata); if (mxc_expio_init(MX31_CS5_BASE_ADDR, EXPIO_PARENT_INT)) printk(KERN_WARNING "Init of the debug board failed, all " diff --git a/arch/arm/mach-mx3/mach-mx35_3ds.c b/arch/arm/mach-mx3/mach-mx35_3ds.c index b66a75aa2e88..6dfdf1746c76 100644 --- a/arch/arm/mach-mx3/mach-mx35_3ds.c +++ b/arch/arm/mach-mx3/mach-mx35_3ds.c @@ -26,7 +26,6 @@ #include #include #include -#include #include @@ -122,7 +121,7 @@ static struct pad_desc mx35pdk_pads[] = { }; /* OTG config */ -static struct fsl_usb2_platform_data usb_otg_pdata = { +static const struct fsl_usb2_platform_data usb_otg_pdata __initconst = { .operating_mode = FSL_USB2_DR_DEVICE, .phy_mode = FSL_USB2_PHY_UTMI_WIDE, }; @@ -146,7 +145,7 @@ static void __init mxc_board_init(void) imx35_add_imx_uart0(&uart_pdata); - mxc_register_device(&mxc_otg_udc_device, &usb_otg_pdata); + imx35_add_fsl_usb2_udc(&usb_otg_pdata); mxc_register_device(&mxc_usbh1, &usb_host_pdata); diff --git a/arch/arm/mach-mx3/mach-pcm037.c b/arch/arm/mach-mx3/mach-pcm037.c index 2ba4f2b9480b..20f7f9485dc6 100644 --- a/arch/arm/mach-mx3/mach-pcm037.c +++ b/arch/arm/mach-mx3/mach-pcm037.c @@ -27,7 +27,6 @@ #include #include #include -#include #include #include #include @@ -550,7 +549,7 @@ static struct mxc_usbh_platform_data usbh2_pdata = { }; #endif -static struct fsl_usb2_platform_data otg_device_pdata = { +static const struct fsl_usb2_platform_data otg_device_pdata __initconst = { .operating_mode = FSL_USB2_DR_DEVICE, .phy_mode = FSL_USB2_PHY_ULPI, }; @@ -664,7 +663,7 @@ static void __init mxc_board_init(void) mxc_register_device(&mxc_usbh2, &usbh2_pdata); #endif if (!otg_mode_host) - mxc_register_device(&mxc_otg_udc_device, &otg_device_pdata); + imx31_add_fsl_usb2_udc(&otg_device_pdata); } diff --git a/arch/arm/mach-mx3/mach-pcm043.c b/arch/arm/mach-mx3/mach-pcm043.c index 4e1de87995d4..78159f073a41 100644 --- a/arch/arm/mach-mx3/mach-pcm043.c +++ b/arch/arm/mach-mx3/mach-pcm043.c @@ -27,7 +27,6 @@ #include #include #include -#include #include #include @@ -323,7 +322,7 @@ static struct mxc_usbh_platform_data usbh1_pdata = { }; #endif -static struct fsl_usb2_platform_data otg_device_pdata = { +static const struct fsl_usb2_platform_data otg_device_pdata __initconst = { .operating_mode = FSL_USB2_DR_DEVICE, .phy_mode = FSL_USB2_PHY_UTMI, }; @@ -392,7 +391,7 @@ static void __init mxc_board_init(void) mxc_register_device(&mxc_usbh1, &usbh1_pdata); #endif if (!otg_mode_host) - mxc_register_device(&mxc_otg_udc_device, &otg_device_pdata); + imx35_add_fsl_usb2_udc(&otg_device_pdata); imx35_add_flexcan1(NULL); imx35_add_esdhc(0, NULL); diff --git a/arch/arm/mach-mx3/mx31moboard-devboard.c b/arch/arm/mach-mx3/mx31moboard-devboard.c index 3b75929f83f0..331b5950c7a0 100644 --- a/arch/arm/mach-mx3/mx31moboard-devboard.c +++ b/arch/arm/mach-mx3/mx31moboard-devboard.c @@ -18,7 +18,6 @@ #include #include #include -#include #include @@ -210,7 +209,7 @@ static int __init devboard_usbh1_init(void) } -static struct fsl_usb2_platform_data usb_pdata = { +static const struct fsl_usb2_platform_data usb_pdata __initconst = { .operating_mode = FSL_USB2_DR_DEVICE, .phy_mode = FSL_USB2_PHY_ULPI, }; @@ -231,7 +230,7 @@ void __init mx31moboard_devboard_init(void) devboard_init_sel_gpios(); - mxc_register_device(&mxc_otg_udc_device, &usb_pdata); + imx31_add_fsl_usb2_udc(&usb_pdata); devboard_usbh1_init(); } diff --git a/arch/arm/mach-mx3/mx31moboard-marxbot.c b/arch/arm/mach-mx3/mx31moboard-marxbot.c index 075c4fb8e74c..db79f744c301 100644 --- a/arch/arm/mach-mx3/mx31moboard-marxbot.c +++ b/arch/arm/mach-mx3/mx31moboard-marxbot.c @@ -21,7 +21,6 @@ #include #include #include -#include #include @@ -326,7 +325,7 @@ static int __init marxbot_usbh1_init(void) return mxc_register_device(&mxc_usbh1, &usbh1_pdata); } -static struct fsl_usb2_platform_data usb_pdata = { +static const struct fsl_usb2_platform_data usb_pdata __initconst = { .operating_mode = FSL_USB2_DR_DEVICE, .phy_mode = FSL_USB2_PHY_ULPI, }; @@ -358,7 +357,7 @@ void __init mx31moboard_marxbot_init(void) gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_LCS0)); gpio_export(IOMUX_TO_GPIO(MX31_PIN_LCS0), false); - mxc_register_device(&mxc_otg_udc_device, &usb_pdata); + imx31_add_fsl_usb2_udc(&usb_pdata); marxbot_usbh1_init(); } diff --git a/arch/arm/mach-mx3/mx31moboard-smartbot.c b/arch/arm/mach-mx3/mx31moboard-smartbot.c index 417757e78c65..68e8ab55f4c7 100644 --- a/arch/arm/mach-mx3/mx31moboard-smartbot.c +++ b/arch/arm/mach-mx3/mx31moboard-smartbot.c @@ -19,7 +19,6 @@ #include #include #include -#include #include #include @@ -119,7 +118,7 @@ static int __init smartbot_cam_init(void) return 0; } -static struct fsl_usb2_platform_data usb_pdata = { +static const struct fsl_usb2_platform_data usb_pdata __initconst = { .operating_mode = FSL_USB2_DR_DEVICE, .phy_mode = FSL_USB2_PHY_ULPI, }; @@ -183,7 +182,7 @@ void __init mx31moboard_smartbot_init(int board) switch (board) { case MX31SMARTBOT: - mxc_register_device(&mxc_otg_udc_device, &usb_pdata); + imx31_add_fsl_usb2_udc(&usb_pdata); break; case MX31EYEBOT: smartbot_otg_host_init(); diff --git a/arch/arm/plat-mxc/devices/platform-fsl-usb2-udc.c b/arch/arm/plat-mxc/devices/platform-fsl-usb2-udc.c index 42c3923c4159..59c33f6e401c 100644 --- a/arch/arm/plat-mxc/devices/platform-fsl-usb2-udc.c +++ b/arch/arm/plat-mxc/devices/platform-fsl-usb2-udc.c @@ -25,6 +25,16 @@ const struct imx_fsl_usb2_udc_data imx27_fsl_usb2_udc_data __initconst = imx_fsl_usb2_udc_data_entry_single(MX27); #endif /* ifdef CONFIG_SOC_IMX27 */ +#ifdef CONFIG_SOC_IMX31 +const struct imx_fsl_usb2_udc_data imx31_fsl_usb2_udc_data __initconst = + imx_fsl_usb2_udc_data_entry_single(MX31); +#endif /* ifdef CONFIG_SOC_IMX31 */ + +#ifdef CONFIG_SOC_IMX35 +const struct imx_fsl_usb2_udc_data imx35_fsl_usb2_udc_data __initconst = + imx_fsl_usb2_udc_data_entry_single(MX35); +#endif /* ifdef CONFIG_SOC_IMX35 */ + struct platform_device *__init imx_add_fsl_usb2_udc( const struct imx_fsl_usb2_udc_data *data, const struct fsl_usb2_platform_data *pdata) diff --git a/arch/arm/plat-mxc/include/mach/mx31.h b/arch/arm/plat-mxc/include/mach/mx31.h index d024c9c5dd3f..092323144e2b 100644 --- a/arch/arm/plat-mxc/include/mach/mx31.h +++ b/arch/arm/plat-mxc/include/mach/mx31.h @@ -24,7 +24,10 @@ #define MX31_ECT_CTIO_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x18000) #define MX31_I2C1_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x80000) #define MX31_I2C3_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x84000) -#define MX31_OTG_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x88000) +#define MX31_USB_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x88000) +#define MX31_USB_OTG_BASE_ADDR (MX31_USB_BASE_ADDR + 0x0000) +#define MX31_USB_HS1_BASE_ADDR (MX31_USB_BASE_ADDR + 0x0200) +#define MX31_USB_HS2_BASE_ADDR (MX31_USB_BASE_ADDR + 0x0400) #define MX31_ATA_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x8c000) #define MX31_UART1_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x90000) #define MX31_UART2_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x94000) @@ -161,10 +164,9 @@ static inline void mx31_setup_weimcs(size_t cs, #define MX31_INT_UART2 32 #define MX31_INT_NFC 33 #define MX31_INT_SDMA 34 -#define MX31_INT_USB1 35 -#define MX31_INT_USB2 36 -#define MX31_INT_USB3 37 -#define MX31_INT_USB4 38 +#define MX31_INT_USB_HS1 35 +#define MX31_INT_USB_HS2 36 +#define MX31_INT_USB_OTG 37 #define MX31_INT_MSHC1 39 #define MX31_INT_MSHC2 40 #define MX31_INT_IPU_ERR 41 diff --git a/arch/arm/plat-mxc/include/mach/mx35.h b/arch/arm/plat-mxc/include/mach/mx35.h index 906722593487..0fa3f6855349 100644 --- a/arch/arm/plat-mxc/include/mach/mx35.h +++ b/arch/arm/plat-mxc/include/mach/mx35.h @@ -65,8 +65,14 @@ #define MX35_CAN2_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xe8000) #define MX35_RTIC_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xec000) #define MX35_IIM_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xf0000) - -#define MX35_OTG_BASE_ADDR 0x53ff4000 +#define MX35_USB_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xf4000) +#define MX35_USB_OTG_BASE_ADDR (MX35_USB_BASE_ADDR + 0x0000) +/* + * The Reference Manual (IMX35RM, Rev. 2, 3/2009) claims an offset of 0x200 for + * HS. When host support was implemented only a preliminary document was + * available, which told 0x400. This works fine. + */ +#define MX35_USB_HS_BASE_ADDR (MX35_USB_BASE_ADDR + 0x0400) #define MX35_ROMP_BASE_ADDR 0x60000000 #define MX35_ROMP_SIZE SZ_1M @@ -143,8 +149,8 @@ #define MX35_INT_UART2 32 #define MX35_INT_NFC 33 #define MX35_INT_SDMA 34 -#define MX35_INT_USBHS 35 -#define MX35_INT_USBOTG 37 +#define MX35_INT_USB_HS 35 +#define MX35_INT_USB_OTG 37 #define MX35_INT_MSHC1 39 #define MX35_INT_ESAI 40 #define MX35_INT_IPU_ERR 41 -- 2.34.1