From a0822a7e3b7333689b1c8cb92782e299791c2795 Mon Sep 17 00:00:00 2001 From: "Mark A. Greer" Date: Tue, 25 Mar 2014 08:54:34 -0700 Subject: [PATCH] NFC: trf7970a: Set 'Modulator and SYS_CLK Control' after 'ISO Control' Writing to the 'ISO Control' register may cause the contents of the 'Modulator and SYS_CLK Control' register to change so be sure to write to 'Modulator and SYS_CLK Control' after writing to 'ISO Control'. Note that writing to the 'Modulator and SYS_CLK Control' register shouldn't be necessary at all according to the trf790a manual but testing shows that it is necessary. Signed-off-by: Mark A. Greer Signed-off-by: Samuel Ortiz --- drivers/nfc/trf7970a.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/nfc/trf7970a.c b/drivers/nfc/trf7970a.c index d17d424bdcee..90ec2ad35932 100644 --- a/drivers/nfc/trf7970a.c +++ b/drivers/nfc/trf7970a.c @@ -765,11 +765,6 @@ static int trf7970a_init(struct trf7970a *trf) if (ret) goto err_out; - ret = trf7970a_write(trf, TRF7970A_MODULATOR_SYS_CLK_CTRL, - TRF7970A_MODULATOR_DEPTH_OOK); - if (ret) - goto err_out; - ret = trf7970a_write(trf, TRF7970A_ADJUTABLE_FIFO_IRQ_LEVELS, TRF7970A_ADJUTABLE_FIFO_IRQ_LEVELS_WLH_96 | TRF7970A_ADJUTABLE_FIFO_IRQ_LEVELS_WLL_32); @@ -943,6 +938,11 @@ static int trf7970a_config_framing(struct trf7970a *trf, int framing) return ret; trf->iso_ctrl = iso_ctrl; + + ret = trf7970a_write(trf, TRF7970A_MODULATOR_SYS_CLK_CTRL, + TRF7970A_MODULATOR_DEPTH_OOK); + if (ret) + return ret; } return 0; -- 2.34.1