From a24b88b56074424a413acc2d2a517fb82f5e7c2f Mon Sep 17 00:00:00 2001 From: Sujith Manoharan Date: Mon, 7 Oct 2013 19:51:57 -0700 Subject: [PATCH] ath10k: Fix bug in max. VHT A-MPDU size For VHT peers, the maximum A-MPDU size has to be calculated from the VHT capabilities element and not the HT-cap. The formula is the same, but a higher value is used in VHT, allowing larger aggregates to be transmitted. The patch contains a workaround for some Netgear/Linksys APs that report Rx A-MPDU factor incorrectly. Tested-by: Kalle Valo Signed-off-by: Sujith Manoharan Signed-off-by: Michal Kazior Signed-off-by: Kalle Valo --- drivers/net/wireless/ath/ath10k/mac.c | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c index 4b7c9494890c..049eca2eb0c9 100644 --- a/drivers/net/wireless/ath/ath10k/mac.c +++ b/drivers/net/wireless/ath/ath10k/mac.c @@ -1033,14 +1033,27 @@ static void ath10k_peer_assoc_h_vht(struct ath10k *ar, struct wmi_peer_assoc_complete_arg *arg) { const struct ieee80211_sta_vht_cap *vht_cap = &sta->vht_cap; + u8 ampdu_factor; if (!vht_cap->vht_supported) return; arg->peer_flags |= WMI_PEER_VHT; - arg->peer_vht_caps = vht_cap->cap; + + ampdu_factor = (vht_cap->cap & + IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_MASK) >> + IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_SHIFT; + + /* Workaround: Some Netgear/Linksys 11ac APs set Rx A-MPDU factor to + * zero in VHT IE. Using it would result in degraded throughput. + * arg->peer_max_mpdu at this point contains HT max_mpdu so keep + * it if VHT max_mpdu is smaller. */ + arg->peer_max_mpdu = max(arg->peer_max_mpdu, + (1U << (IEEE80211_HT_MAX_AMPDU_FACTOR + + ampdu_factor)) - 1); + if (sta->bandwidth == IEEE80211_STA_RX_BW_80) arg->peer_flags |= WMI_PEER_80MHZ; -- 2.34.1