From a735d992c2e71e230b798518b7fe954fdbc2dc8c Mon Sep 17 00:00:00 2001 From: Jarkko Nikula Date: Fri, 16 May 2014 16:55:24 +0300 Subject: [PATCH] ASoC: max98090: Move microphone bias voltage setting to probe function Microphone bias level configuration register can configure voltage between 2.2 V and 2.8 V but doesn't manage is voltage on or off. Microphone bias on/off state is controlled by "MICBIAS" DAPM widget. Therefore there is no need to update bias voltage conditionally depending on jack state each time when codec goes to SND_SOC_BIAS_ON state and setting can be moved to max98090_probe() as driver currently doesn't support other levels than 2.8 V. Signed-off-by: Jarkko Nikula Signed-off-by: Mark Brown --- sound/soc/codecs/max98090.c | 10 +++------- 1 file changed, 3 insertions(+), 7 deletions(-) diff --git a/sound/soc/codecs/max98090.c b/sound/soc/codecs/max98090.c index d36cd154db55..c88bf821b86f 100644 --- a/sound/soc/codecs/max98090.c +++ b/sound/soc/codecs/max98090.c @@ -1795,13 +1795,6 @@ static int max98090_set_bias_level(struct snd_soc_codec *codec, switch (level) { case SND_SOC_BIAS_ON: - if (max98090->jack_state == M98090_JACK_STATE_HEADSET) { - /* - * Set to normal bias level. - */ - snd_soc_update_bits(codec, M98090_REG_MIC_BIAS_VOLTAGE, - M98090_MBVSEL_MASK, M98090_MBVSEL_2V8); - } break; case SND_SOC_BIAS_PREPARE: @@ -2296,6 +2289,9 @@ static int max98090_probe(struct snd_soc_codec *codec) snd_soc_write(codec, M98090_REG_BIAS_CONTROL, M98090_VCM_MODE_MASK); + snd_soc_update_bits(codec, M98090_REG_MIC_BIAS_VOLTAGE, + M98090_MBVSEL_MASK, M98090_MBVSEL_2V8); + max98090_handle_pdata(codec); max98090_add_widgets(codec); -- 2.34.1