From abf1e27fbb4200a010b8fcb1be8cc02485744862 Mon Sep 17 00:00:00 2001 From: John Bonesio Date: Wed, 17 Nov 2010 15:28:30 -0800 Subject: [PATCH] powerpc/5200: dts: rename nodes to prepare for refactoring dts files This patch renames nodes in dts fils for MPC5200b files to prepare for refactoring of these files later. When refactoring it will be easier to verify the results if the node names aren't changing at the same time. Signed-off-by: John Bonesio Signed-off-by: Grant Likely --- arch/powerpc/boot/dts/cm5200.dts | 8 ++++---- arch/powerpc/boot/dts/digsy_mtc.dts | 6 +++--- arch/powerpc/boot/dts/lite5200b.dts | 2 +- arch/powerpc/boot/dts/media5200.dts | 2 +- arch/powerpc/boot/dts/motionpro.dts | 10 +++++----- arch/powerpc/boot/dts/mucmc52.dts | 6 +++--- arch/powerpc/boot/dts/pcm030.dts | 6 +++--- arch/powerpc/boot/dts/pcm032.dts | 6 +++--- arch/powerpc/boot/dts/uc101.dts | 6 +++--- 9 files changed, 26 insertions(+), 26 deletions(-) diff --git a/arch/powerpc/boot/dts/cm5200.dts b/arch/powerpc/boot/dts/cm5200.dts index dd3860846f15..9369dcd00a5f 100644 --- a/arch/powerpc/boot/dts/cm5200.dts +++ b/arch/powerpc/boot/dts/cm5200.dts @@ -160,25 +160,25 @@ reg = <0x1f00 0x100>; }; - serial@2000 { // PSC1 + psc@2000 { // PSC1 compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; reg = <0x2000 0x100>; interrupts = <2 1 0>; }; - serial@2200 { // PSC2 + psc@2200 { // PSC2 compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; reg = <0x2200 0x100>; interrupts = <2 2 0>; }; - serial@2400 { // PSC3 + psc@2400 { // PSC3 compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; reg = <0x2400 0x100>; interrupts = <2 3 0>; }; - serial@2c00 { // PSC6 + psc@2c00 { // PSC6 compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; reg = <0x2c00 0x100>; interrupts = <2 4 0>; diff --git a/arch/powerpc/boot/dts/digsy_mtc.dts b/arch/powerpc/boot/dts/digsy_mtc.dts index 8e9be6bfe23e..f0592de71bb6 100644 --- a/arch/powerpc/boot/dts/digsy_mtc.dts +++ b/arch/powerpc/boot/dts/digsy_mtc.dts @@ -155,13 +155,13 @@ reg = <0x1f00 0x100>; }; - serial@2600 { // PSC4 + psc@2600 { // PSC4 compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; reg = <0x2600 0x100>; interrupts = <2 11 0>; }; - serial@2800 { // PSC5 + psc@2800 { // PSC5 compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; reg = <0x2800 0x100>; interrupts = <2 12 0>; @@ -217,7 +217,7 @@ }; }; - lpb { + localbus { compatible = "fsl,mpc5200b-lpb","simple-bus"; #address-cells = <2>; #size-cells = <1>; diff --git a/arch/powerpc/boot/dts/lite5200b.dts b/arch/powerpc/boot/dts/lite5200b.dts index 59702ace900f..a74b79084059 100644 --- a/arch/powerpc/boot/dts/lite5200b.dts +++ b/arch/powerpc/boot/dts/lite5200b.dts @@ -172,7 +172,7 @@ reg = <0x1f00 0x100>; }; - serial@2000 { // PSC1 + psc@2000 { // PSC1 compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; cell-index = <0>; reg = <0x2000 0x100>; diff --git a/arch/powerpc/boot/dts/media5200.dts b/arch/powerpc/boot/dts/media5200.dts index 0c3902bc5b6a..a70ef680f301 100644 --- a/arch/powerpc/boot/dts/media5200.dts +++ b/arch/powerpc/boot/dts/media5200.dts @@ -183,7 +183,7 @@ }; // PSC6 in uart mode - console: serial@2c00 { // PSC6 + console: psc@2c00 { // PSC6 compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; cell-index = <5>; port-number = <0>; // Logical port assignment diff --git a/arch/powerpc/boot/dts/motionpro.dts b/arch/powerpc/boot/dts/motionpro.dts index 6ca4fc144a33..f6261ea0972b 100644 --- a/arch/powerpc/boot/dts/motionpro.dts +++ b/arch/powerpc/boot/dts/motionpro.dts @@ -100,7 +100,7 @@ interrupts = <1 14 0>; }; - motionpro-led@660 { // Motion-PRO status LED + timer@660 { // Motion-PRO status LED compatible = "promess,motionpro-led"; label = "motionpro-statusled"; reg = <0x660 0x10>; @@ -108,7 +108,7 @@ blink-delay = <100>; // 100 msec }; - motionpro-led@670 { // Motion-PRO ready LED + timer@670 { // Motion-PRO ready LED compatible = "promess,motionpro-led"; label = "motionpro-readyled"; reg = <0x670 0x10>; @@ -169,14 +169,14 @@ reg = <0x1f00 0x100>; }; - serial@2000 { // PSC1 + psc@2000 { // PSC1 compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; reg = <0x2000 0x100>; interrupts = <2 1 0>; }; // PSC2 in spi master mode - spi@2200 { // PSC2 + psc@2200 { // PSC2 compatible = "fsl,mpc5200b-psc-spi","fsl,mpc5200-psc-spi"; cell-index = <1>; reg = <0x2200 0x100>; @@ -184,7 +184,7 @@ }; // PSC5 in uart mode - serial@2800 { // PSC5 + psc@2800 { // PSC5 compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; reg = <0x2800 0x100>; interrupts = <2 12 0>; diff --git a/arch/powerpc/boot/dts/mucmc52.dts b/arch/powerpc/boot/dts/mucmc52.dts index b72a7581d798..8dc212d9238b 100644 --- a/arch/powerpc/boot/dts/mucmc52.dts +++ b/arch/powerpc/boot/dts/mucmc52.dts @@ -126,19 +126,19 @@ reg = <0x1f00 0x100>; }; - serial@2000 { /* PSC1 in UART mode */ + psc@2000 { /* PSC1 in UART mode */ compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; reg = <0x2000 0x100>; interrupts = <2 1 0>; }; - serial@2200 { /* PSC2 in UART mode */ + psc@2200 { /* PSC2 in UART mode */ compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; reg = <0x2200 0x100>; interrupts = <2 2 0>; }; - serial@2c00 { /* PSC6 in UART mode */ + psc@2c00 { /* PSC6 in UART mode */ compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; reg = <0x2c00 0x100>; interrupts = <2 4 0>; diff --git a/arch/powerpc/boot/dts/pcm030.dts b/arch/powerpc/boot/dts/pcm030.dts index e7c36bc88fa0..34ab3bbcf990 100644 --- a/arch/powerpc/boot/dts/pcm030.dts +++ b/arch/powerpc/boot/dts/pcm030.dts @@ -185,7 +185,7 @@ reg = <0x1f00 0x100>; }; - ac97@2000 { /* PSC1 in ac97 mode */ + psc@2000 { /* PSC1 in ac97 mode */ compatible = "mpc5200b-psc-ac97","fsl,mpc5200b-psc-ac97"; cell-index = <0>; reg = <0x2000 0x100>; @@ -194,7 +194,7 @@ /* PSC2 port is used by CAN1/2 */ - serial@2400 { /* PSC3 in UART mode */ + psc@2400 { /* PSC3 in UART mode */ compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; cell-index = <2>; reg = <0x2400 0x100>; @@ -205,7 +205,7 @@ /* PSC5 is ??? */ - serial@2c00 { /* PSC6 in UART mode */ + psc@2c00 { /* PSC6 in UART mode */ compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; cell-index = <5>; reg = <0x2c00 0x100>; diff --git a/arch/powerpc/boot/dts/pcm032.dts b/arch/powerpc/boot/dts/pcm032.dts index e175e2c601b5..29fde83b99b3 100644 --- a/arch/powerpc/boot/dts/pcm032.dts +++ b/arch/powerpc/boot/dts/pcm032.dts @@ -185,7 +185,7 @@ reg = <0x1f00 0x100>; }; - ac97@2000 { /* PSC1 is ac97 */ + psc@2000 { /* PSC1 is ac97 */ compatible = "fsl,mpc5200b-psc-ac97","fsl,mpc5200-psc-ac97"; cell-index = <0>; reg = <0x2000 0x100>; @@ -194,7 +194,7 @@ /* PSC2 port is used by CAN1/2 */ - serial@2400 { /* PSC3 in UART mode */ + psc@2400 { /* PSC3 in UART mode */ compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; cell-index = <2>; reg = <0x2400 0x100>; @@ -205,7 +205,7 @@ /* PSC5 is ??? */ - serial@2c00 { /* PSC6 in UART mode */ + psc@2c00 { /* PSC6 in UART mode */ compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; cell-index = <5>; reg = <0x2c00 0x100>; diff --git a/arch/powerpc/boot/dts/uc101.dts b/arch/powerpc/boot/dts/uc101.dts index 019264c62904..e00441a3e5a7 100644 --- a/arch/powerpc/boot/dts/uc101.dts +++ b/arch/powerpc/boot/dts/uc101.dts @@ -158,19 +158,19 @@ reg = <0x1f00 0x100>; }; - serial@2000 { /* PSC1 in UART mode */ + psc@2000 { /* PSC1 in UART mode */ compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; reg = <0x2000 0x100>; interrupts = <2 1 0>; }; - serial@2200 { /* PSC2 in UART mode */ + psc@2200 { /* PSC2 in UART mode */ compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; reg = <0x2200 0x100>; interrupts = <2 2 0>; }; - serial@2c00 { /* PSC6 in UART mode */ + psc@2c00 { /* PSC6 in UART mode */ compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; reg = <0x2c00 0x100>; interrupts = <2 4 0>; -- 2.34.1