From aca3a0489ac019b58cf32794d5362bb284cb9b94 Mon Sep 17 00:00:00 2001 From: Zhuang Jin Can Date: Tue, 21 Jul 2015 17:20:31 +0300 Subject: [PATCH] xhci: do not report PLC when link is in internal resume state Port link change with port in resume state should not be reported to usbcore, as this is an internal state to be handled by xhci driver. Reporting PLC to usbcore may cause usbcore clearing PLC first and port change event irq won't be generated. Cc: Signed-off-by: Zhuang Jin Can Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-hub.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index fdca8edc5836..78241b5550df 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -591,7 +591,14 @@ static u32 xhci_get_port_status(struct usb_hcd *hcd, status |= USB_PORT_STAT_C_RESET << 16; /* USB3.0 only */ if (hcd->speed == HCD_USB3) { - if ((raw_port_status & PORT_PLC)) + /* Port link change with port in resume state should not be + * reported to usbcore, as this is an internal state to be + * handled by xhci driver. Reporting PLC to usbcore may + * cause usbcore clearing PLC first and port change event + * irq won't be generated. + */ + if ((raw_port_status & PORT_PLC) && + (raw_port_status & PORT_PLS_MASK) != XDEV_RESUME) status |= USB_PORT_STAT_C_LINK_STATE << 16; if ((raw_port_status & PORT_WRC)) status |= USB_PORT_STAT_C_BH_RESET << 16; -- 2.34.1