From adc18315889b3e67a4a2a9717fbbfab5cd2d7b57 Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Mon, 1 Oct 2012 15:21:20 -0600 Subject: [PATCH] ARM: tegra: simplify DEBUG_LL UART selection options Delete CONFIG_TEGRA_DEBUG_UART_AUTO_SCRATCH; it's not useful any more: * No upstream bootloader currently or will ever support this option. * CONFIG_TEGRA_DEBUG_UART_AUTO_ODMDATA is a much more direct alternative. Merge the fixed and automatic UART selection menus into a single choice for simplicity; now you either pick AUTO_ODMDATA or a single fixed UART, rather than potentially having an AUTO option override whatever fixed option was chosen. Remove TEGRA_DEBUG_UART_NONE; if you don't want a Tegra DEBUG_LL UART, simply don't turn on DEBUG_LL. NONE used to be the default option, so pick AUTO_ODMDATA as the new default. Signed-off-by: Stephen Warren --- arch/arm/mach-tegra/Kconfig | 40 ++++---------- arch/arm/mach-tegra/common.c | 5 +- arch/arm/mach-tegra/include/mach/uncompress.h | 52 ++----------------- arch/arm/mach-tegra/iomap.h | 14 ----- 4 files changed, 15 insertions(+), 96 deletions(-) diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig index 9ff6f6ea3617..97fcd16e2dab 100644 --- a/arch/arm/mach-tegra/Kconfig +++ b/arch/arm/mach-tegra/Kconfig @@ -58,11 +58,16 @@ config TEGRA_AHB perfomance parameters(priority, prefech size). choice - prompt "Default low-level debug console UART" - default TEGRA_DEBUG_UART_NONE + prompt "Low-level debug console UART" -config TEGRA_DEBUG_UART_NONE - bool "None" +config TEGRA_DEBUG_UART_AUTO_ODMDATA + bool "Via ODMDATA" + help + Automatically determines which UART to use for low-level debug based + on the ODMDATA value. This value is part of the BCT, and is written + to the boot memory device using nvflash, or other flashing tool. + When bits 19:18 are 3, then bits 17:15 indicate which UART to use; + 0/1/2/3/4 are UART A/B/C/D/E. config TEGRA_DEBUG_UARTA bool "UART-A" @@ -81,33 +86,6 @@ config TEGRA_DEBUG_UARTE endchoice -choice - prompt "Automatic low-level debug console UART" - default TEGRA_DEBUG_UART_AUTO_NONE - -config TEGRA_DEBUG_UART_AUTO_NONE - bool "None" - -config TEGRA_DEBUG_UART_AUTO_ODMDATA - bool "Via ODMDATA" - help - Automatically determines which UART to use for low-level debug based - on the ODMDATA value. This value is part of the BCT, and is written - to the boot memory device using nvflash, or other flashing tool. - When bits 19:18 are 3, then bits 17:15 indicate which UART to use; - 0/1/2/3/4 are UART A/B/C/D/E. - -config TEGRA_DEBUG_UART_AUTO_SCRATCH - bool "Via UART scratch register" - help - Automatically determines which UART to use for low-level debug based - on the UART scratch register value. Some bootloaders put ASCII 'D' - in this register when they initialize their own console UART output. - Using this option allows the kernel to automatically pick the same - UART. - -endchoice - config TEGRA_EMC_SCALING_ENABLE bool "Enable scaling the memory frequency" diff --git a/arch/arm/mach-tegra/common.c b/arch/arm/mach-tegra/common.c index 3e03e5f15c14..8b41e4c0d53f 100644 --- a/arch/arm/mach-tegra/common.c +++ b/arch/arm/mach-tegra/common.c @@ -44,14 +44,13 @@ * kernel is loaded. The data is declared here rather than debug-macro.S so * that multiple inclusions of debug-macro.S point at the same data. */ -#define TEGRA_DEBUG_UART_OFFSET (TEGRA_DEBUG_UART_BASE & 0xFFFF) u32 tegra_uart_config[3] = { /* Debug UART initialization required */ 1, /* Debug UART physical address */ - (u32)(IO_APB_PHYS + TEGRA_DEBUG_UART_OFFSET), + 0, /* Debug UART virtual address */ - (u32)(IO_APB_VIRT + TEGRA_DEBUG_UART_OFFSET), + 0, }; #ifdef CONFIG_OF diff --git a/arch/arm/mach-tegra/include/mach/uncompress.h b/arch/arm/mach-tegra/include/mach/uncompress.h index 27725750ca3e..4150c71c006f 100644 --- a/arch/arm/mach-tegra/include/mach/uncompress.h +++ b/arch/arm/mach-tegra/include/mach/uncompress.h @@ -139,51 +139,19 @@ int auto_odmdata(void) } #endif -#ifdef CONFIG_TEGRA_DEBUG_UART_AUTO_SCRATCH -int auto_scratch(void) -{ - int i; - - /* - * Look for the first UART that: - * a) Is not in reset. - * b) Is clocked. - * c) Has a 'D' in the scratchpad register. - * - * Note that on Tegra30, the first two conditions are required, since - * if not true, accesses to the UART scratch register will hang. - * Tegra20 doesn't have this issue. - * - * The intent is that the bootloader will tell the kernel which UART - * to use by setting up those conditions. If nothing found, we'll fall - * back to what's specified in TEGRA_DEBUG_UART_BASE. - */ - for (i = 0; i < ARRAY_SIZE(uarts); i++) { - if (!uart_clocked(i)) - continue; - - uart = (volatile u8 *)uarts[i].base; - if (uart[UART_SCR << DEBUG_UART_SHIFT] != 'D') - continue; - - return i; - } - - return -1; -} -#endif - /* * Setup before decompression. This is where we do UART selection for * earlyprintk and init the uart_base register. */ static inline void arch_decomp_setup(void) { - int uart_id, auto_uart_id; + int uart_id; volatile u32 *apb_misc = (volatile u32 *)TEGRA_APB_MISC_BASE; u32 chip, div; -#if defined(CONFIG_TEGRA_DEBUG_UARTA) +#if defined(CONFIG_TEGRA_DEBUG_UART_AUTO_ODMDATA) + uart_id = auto_odmdata(); +#elif defined(CONFIG_TEGRA_DEBUG_UARTA) uart_id = 0; #elif defined(CONFIG_TEGRA_DEBUG_UARTB) uart_id = 1; @@ -193,19 +161,7 @@ static inline void arch_decomp_setup(void) uart_id = 3; #elif defined(CONFIG_TEGRA_DEBUG_UARTE) uart_id = 4; -#else - uart_id = -1; -#endif - -#if defined(CONFIG_TEGRA_DEBUG_UART_AUTO_ODMDATA) - auto_uart_id = auto_odmdata(); -#elif defined(CONFIG_TEGRA_DEBUG_UART_AUTO_SCRATCH) - auto_uart_id = auto_scratch(); -#else - auto_uart_id = -1; #endif - if (auto_uart_id != -1) - uart_id = auto_uart_id; if (uart_id < 0 || uart_id >= ARRAY_SIZE(uarts) || !uart_clocked(uart_id)) diff --git a/arch/arm/mach-tegra/iomap.h b/arch/arm/mach-tegra/iomap.h index 53151030a07d..db8be51cad80 100644 --- a/arch/arm/mach-tegra/iomap.h +++ b/arch/arm/mach-tegra/iomap.h @@ -261,20 +261,6 @@ #define TEGRA_SDMMC4_BASE 0xC8000600 #define TEGRA_SDMMC4_SIZE SZ_512 -#if defined(CONFIG_TEGRA_DEBUG_UART_NONE) -# define TEGRA_DEBUG_UART_BASE 0 -#elif defined(CONFIG_TEGRA_DEBUG_UARTA) -# define TEGRA_DEBUG_UART_BASE TEGRA_UARTA_BASE -#elif defined(CONFIG_TEGRA_DEBUG_UARTB) -# define TEGRA_DEBUG_UART_BASE TEGRA_UARTB_BASE -#elif defined(CONFIG_TEGRA_DEBUG_UARTC) -# define TEGRA_DEBUG_UART_BASE TEGRA_UARTC_BASE -#elif defined(CONFIG_TEGRA_DEBUG_UARTD) -# define TEGRA_DEBUG_UART_BASE TEGRA_UARTD_BASE -#elif defined(CONFIG_TEGRA_DEBUG_UARTE) -# define TEGRA_DEBUG_UART_BASE TEGRA_UARTE_BASE -#endif - /* On TEGRA, many peripherals are very closely packed in * two 256MB io windows (that actually only use about 64KB * at the start of each). -- 2.34.1