From ae3e4c277669e16093f0e71ca927cf33e7dde053 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Tue, 16 Jul 2013 12:32:08 +0200 Subject: [PATCH] leds: Remove leds-renesas-tpu driver The driver is superseded by the generic pwm-renesas-tpu driver used with leds-pwm. Signed-off-by: Laurent Pinchart Acked-by: Bryan Wu Signed-off-by: Simon Horman --- drivers/leds/Kconfig | 12 - drivers/leds/Makefile | 1 - drivers/leds/leds-renesas-tpu.c | 337 ------------------ .../linux/platform_data/leds-renesas-tpu.h | 14 - 4 files changed, 364 deletions(-) delete mode 100644 drivers/leds/leds-renesas-tpu.c delete mode 100644 include/linux/platform_data/leds-renesas-tpu.h diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig index e43402dd1dea..074bcb3892b5 100644 --- a/drivers/leds/Kconfig +++ b/drivers/leds/Kconfig @@ -429,18 +429,6 @@ config LEDS_ASIC3 cannot be used. This driver supports hardware blinking with an on+off period from 62ms to 125s. Say Y to enable LEDs on the HP iPAQ hx4700. -config LEDS_RENESAS_TPU - bool "LED support for Renesas TPU" - depends on LEDS_CLASS=y && HAVE_CLK && GPIOLIB - help - This option enables build of the LED TPU platform driver, - suitable to drive any TPU channel on newer Renesas SoCs. - The driver controls the GPIO pin connected to the LED via - the GPIO framework and expects the LED to be connected to - a pin that can be driven in both GPIO mode and using TPU - pin function. The latter to support brightness control. - Brightness control is supported but hardware blinking is not. - config LEDS_TCA6507 tristate "LED Support for TCA6507 I2C chip" depends on LEDS_CLASS && I2C diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile index ac2897732b02..ae4b6135f665 100644 --- a/drivers/leds/Makefile +++ b/drivers/leds/Makefile @@ -49,7 +49,6 @@ obj-$(CONFIG_LEDS_MC13783) += leds-mc13783.o obj-$(CONFIG_LEDS_NS2) += leds-ns2.o obj-$(CONFIG_LEDS_NETXBIG) += leds-netxbig.o obj-$(CONFIG_LEDS_ASIC3) += leds-asic3.o -obj-$(CONFIG_LEDS_RENESAS_TPU) += leds-renesas-tpu.o obj-$(CONFIG_LEDS_MAX8997) += leds-max8997.o obj-$(CONFIG_LEDS_LM355x) += leds-lm355x.o obj-$(CONFIG_LEDS_BLINKM) += leds-blinkm.o diff --git a/drivers/leds/leds-renesas-tpu.c b/drivers/leds/leds-renesas-tpu.c deleted file mode 100644 index adebf4931e1e..000000000000 --- a/drivers/leds/leds-renesas-tpu.c +++ /dev/null @@ -1,337 +0,0 @@ -/* - * LED control using Renesas TPU - * - * Copyright (C) 2011 Magnus Damm - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -enum r_tpu_pin { R_TPU_PIN_UNUSED, R_TPU_PIN_GPIO, R_TPU_PIN_GPIO_FN }; -enum r_tpu_timer { R_TPU_TIMER_UNUSED, R_TPU_TIMER_ON }; - -struct r_tpu_priv { - struct led_classdev ldev; - void __iomem *mapbase; - struct clk *clk; - struct platform_device *pdev; - enum r_tpu_pin pin_state; - enum r_tpu_timer timer_state; - unsigned long min_rate; - unsigned int refresh_rate; - struct work_struct work; - enum led_brightness new_brightness; -}; - -static DEFINE_SPINLOCK(r_tpu_lock); - -#define TSTR -1 /* Timer start register (shared register) */ -#define TCR 0 /* Timer control register (+0x00) */ -#define TMDR 1 /* Timer mode register (+0x04) */ -#define TIOR 2 /* Timer I/O control register (+0x08) */ -#define TIER 3 /* Timer interrupt enable register (+0x0c) */ -#define TSR 4 /* Timer status register (+0x10) */ -#define TCNT 5 /* Timer counter (+0x14) */ -#define TGRA 6 /* Timer general register A (+0x18) */ -#define TGRB 7 /* Timer general register B (+0x1c) */ -#define TGRC 8 /* Timer general register C (+0x20) */ -#define TGRD 9 /* Timer general register D (+0x24) */ - -static inline u16 r_tpu_read(struct r_tpu_priv *p, int reg_nr) -{ - struct led_renesas_tpu_config *cfg = p->pdev->dev.platform_data; - void __iomem *base = p->mapbase; - unsigned long offs = reg_nr << 2; - - if (reg_nr == TSTR) - return ioread16(base - cfg->channel_offset); - - return ioread16(base + offs); -} - -static inline void r_tpu_write(struct r_tpu_priv *p, int reg_nr, u16 value) -{ - struct led_renesas_tpu_config *cfg = p->pdev->dev.platform_data; - void __iomem *base = p->mapbase; - unsigned long offs = reg_nr << 2; - - if (reg_nr == TSTR) { - iowrite16(value, base - cfg->channel_offset); - return; - } - - iowrite16(value, base + offs); -} - -static void r_tpu_start_stop_ch(struct r_tpu_priv *p, int start) -{ - struct led_renesas_tpu_config *cfg = p->pdev->dev.platform_data; - unsigned long flags; - u16 value; - - /* start stop register shared by multiple timer channels */ - spin_lock_irqsave(&r_tpu_lock, flags); - value = r_tpu_read(p, TSTR); - - if (start) - value |= 1 << cfg->timer_bit; - else - value &= ~(1 << cfg->timer_bit); - - r_tpu_write(p, TSTR, value); - spin_unlock_irqrestore(&r_tpu_lock, flags); -} - -static int r_tpu_enable(struct r_tpu_priv *p, enum led_brightness brightness) -{ - struct led_renesas_tpu_config *cfg = p->pdev->dev.platform_data; - int prescaler[] = { 1, 4, 16, 64 }; - int k, ret; - unsigned long rate, tmp; - - if (p->timer_state == R_TPU_TIMER_ON) - return 0; - - /* wake up device and enable clock */ - pm_runtime_get_sync(&p->pdev->dev); - ret = clk_enable(p->clk); - if (ret) { - dev_err(&p->pdev->dev, "cannot enable clock\n"); - return ret; - } - - /* make sure channel is disabled */ - r_tpu_start_stop_ch(p, 0); - - /* get clock rate after enabling it */ - rate = clk_get_rate(p->clk); - - /* pick the lowest acceptable rate */ - for (k = ARRAY_SIZE(prescaler) - 1; k >= 0; k--) - if ((rate / prescaler[k]) >= p->min_rate) - break; - - if (k < 0) { - dev_err(&p->pdev->dev, "clock rate mismatch\n"); - goto err0; - } - dev_dbg(&p->pdev->dev, "rate = %lu, prescaler %u\n", - rate, prescaler[k]); - - /* clear TCNT on TGRB match, count on rising edge, set prescaler */ - r_tpu_write(p, TCR, 0x0040 | k); - - /* output 0 until TGRA, output 1 until TGRB */ - r_tpu_write(p, TIOR, 0x0002); - - rate /= prescaler[k] * p->refresh_rate; - r_tpu_write(p, TGRB, rate); - dev_dbg(&p->pdev->dev, "TRGB = 0x%04lx\n", rate); - - tmp = (cfg->max_brightness - brightness) * rate; - r_tpu_write(p, TGRA, tmp / cfg->max_brightness); - dev_dbg(&p->pdev->dev, "TRGA = 0x%04lx\n", tmp / cfg->max_brightness); - - /* PWM mode */ - r_tpu_write(p, TMDR, 0x0002); - - /* enable channel */ - r_tpu_start_stop_ch(p, 1); - - p->timer_state = R_TPU_TIMER_ON; - return 0; - err0: - clk_disable(p->clk); - pm_runtime_put_sync(&p->pdev->dev); - return -ENOTSUPP; -} - -static void r_tpu_disable(struct r_tpu_priv *p) -{ - if (p->timer_state == R_TPU_TIMER_UNUSED) - return; - - /* disable channel */ - r_tpu_start_stop_ch(p, 0); - - /* stop clock and mark device as idle */ - clk_disable(p->clk); - pm_runtime_put_sync(&p->pdev->dev); - - p->timer_state = R_TPU_TIMER_UNUSED; -} - -static void r_tpu_set_pin(struct r_tpu_priv *p, enum r_tpu_pin new_state, - enum led_brightness brightness) -{ - struct led_renesas_tpu_config *cfg = p->pdev->dev.platform_data; - - if (p->pin_state == new_state) { - if (p->pin_state == R_TPU_PIN_GPIO) - gpio_set_value(cfg->pin_gpio, brightness); - return; - } - - if (p->pin_state == R_TPU_PIN_GPIO) - gpio_free(cfg->pin_gpio); - - if (p->pin_state == R_TPU_PIN_GPIO_FN) - gpio_free(cfg->pin_gpio_fn); - - if (new_state == R_TPU_PIN_GPIO) - gpio_request_one(cfg->pin_gpio, !!brightness ? - GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW, - cfg->name); - - if (new_state == R_TPU_PIN_GPIO_FN) - gpio_request(cfg->pin_gpio_fn, cfg->name); - - p->pin_state = new_state; -} - -static void r_tpu_work(struct work_struct *work) -{ - struct r_tpu_priv *p = container_of(work, struct r_tpu_priv, work); - enum led_brightness brightness = p->new_brightness; - - r_tpu_disable(p); - - /* off and maximum are handled as GPIO pins, in between PWM */ - if ((brightness == 0) || (brightness == p->ldev.max_brightness)) - r_tpu_set_pin(p, R_TPU_PIN_GPIO, brightness); - else { - r_tpu_set_pin(p, R_TPU_PIN_GPIO_FN, 0); - r_tpu_enable(p, brightness); - } -} - -static void r_tpu_set_brightness(struct led_classdev *ldev, - enum led_brightness brightness) -{ - struct r_tpu_priv *p = container_of(ldev, struct r_tpu_priv, ldev); - p->new_brightness = brightness; - schedule_work(&p->work); -} - -static int r_tpu_probe(struct platform_device *pdev) -{ - struct led_renesas_tpu_config *cfg = pdev->dev.platform_data; - struct r_tpu_priv *p; - struct resource *res; - int ret; - - if (!cfg) { - dev_err(&pdev->dev, "missing platform data\n"); - return -ENODEV; - } - - p = devm_kzalloc(&pdev->dev, sizeof(*p), GFP_KERNEL); - if (p == NULL) { - dev_err(&pdev->dev, "failed to allocate driver data\n"); - return -ENOMEM; - } - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(&pdev->dev, "failed to get I/O memory\n"); - return -ENXIO; - } - - /* map memory, let mapbase point to our channel */ - p->mapbase = devm_ioremap_nocache(&pdev->dev, res->start, - resource_size(res)); - if (p->mapbase == NULL) { - dev_err(&pdev->dev, "failed to remap I/O memory\n"); - return -ENXIO; - } - - /* get hold of clock */ - p->clk = devm_clk_get(&pdev->dev, NULL); - if (IS_ERR(p->clk)) { - dev_err(&pdev->dev, "cannot get clock\n"); - return PTR_ERR(p->clk); - } - - p->pdev = pdev; - p->pin_state = R_TPU_PIN_UNUSED; - p->timer_state = R_TPU_TIMER_UNUSED; - p->refresh_rate = cfg->refresh_rate ? cfg->refresh_rate : 100; - r_tpu_set_pin(p, R_TPU_PIN_GPIO, LED_OFF); - platform_set_drvdata(pdev, p); - - INIT_WORK(&p->work, r_tpu_work); - - p->ldev.name = cfg->name; - p->ldev.brightness = LED_OFF; - p->ldev.max_brightness = cfg->max_brightness; - p->ldev.brightness_set = r_tpu_set_brightness; - p->ldev.flags |= LED_CORE_SUSPENDRESUME; - ret = led_classdev_register(&pdev->dev, &p->ldev); - if (ret < 0) - goto err0; - - /* max_brightness may be updated by the LED core code */ - p->min_rate = p->ldev.max_brightness * p->refresh_rate; - - pm_runtime_enable(&pdev->dev); - return 0; - - err0: - r_tpu_set_pin(p, R_TPU_PIN_UNUSED, LED_OFF); - return ret; -} - -static int r_tpu_remove(struct platform_device *pdev) -{ - struct r_tpu_priv *p = platform_get_drvdata(pdev); - - r_tpu_set_brightness(&p->ldev, LED_OFF); - led_classdev_unregister(&p->ldev); - cancel_work_sync(&p->work); - r_tpu_disable(p); - r_tpu_set_pin(p, R_TPU_PIN_UNUSED, LED_OFF); - - pm_runtime_disable(&pdev->dev); - - return 0; -} - -static struct platform_driver r_tpu_device_driver = { - .probe = r_tpu_probe, - .remove = r_tpu_remove, - .driver = { - .name = "leds-renesas-tpu", - } -}; - -module_platform_driver(r_tpu_device_driver); - -MODULE_AUTHOR("Magnus Damm"); -MODULE_DESCRIPTION("Renesas TPU LED Driver"); -MODULE_LICENSE("GPL v2"); diff --git a/include/linux/platform_data/leds-renesas-tpu.h b/include/linux/platform_data/leds-renesas-tpu.h deleted file mode 100644 index 055387086fc1..000000000000 --- a/include/linux/platform_data/leds-renesas-tpu.h +++ /dev/null @@ -1,14 +0,0 @@ -#ifndef __LEDS_RENESAS_TPU_H__ -#define __LEDS_RENESAS_TPU_H__ - -struct led_renesas_tpu_config { - char *name; - unsigned pin_gpio_fn; - unsigned pin_gpio; - unsigned int channel_offset; - unsigned int timer_bit; - unsigned int max_brightness; - unsigned int refresh_rate; -}; - -#endif /* __LEDS_RENESAS_TPU_H__ */ -- 2.34.1