From b05193c44c24f303791cda913fa37b8bef33cc4f Mon Sep 17 00:00:00 2001 From: Timur Tabi Date: Fri, 13 Jul 2012 17:40:43 -0500 Subject: [PATCH] powerpc/85xx: remove P1020RDB and P2020RDB CAMP device trees We only need two examples of CAMP device trees in the upstream kernel. Co-operative Asymmetric Multi-Processing (CAMP) is a technique where two or more operating systems (typically multiple copies of the same Linux kernel) are loaded into memory, and each kernel is given a subset of the available cores to execute on. For example, on a four-core system, one kernel runs on cores 0 and 1, and the other runs on cores 2 and 3. The devices are also partitioned among the operating systems, and this is done with customized device trees. Each kernel gets its own device tree that has only the devices that it should know about. Unfortunately, this approach is very hackish. The kernels are trusted to only access devices in their respective device trees, and the partitioning only works for devices that can be handled. Crafting the device trees is a tricky process, and getting U-Boot to load and start all kernels is cumbersome. But most importantly, each CAMP setup is very application-specific, since the actual partitioning of resources is done in the DTS by the system designer. Therefore, it doesn't make a lot of sense to have a lot of CAMP device trees, since we only expect them to be used as examples. Signed-off-by: Timur Tabi Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/p1020rdb_camp_core0.dts | 63 -------- arch/powerpc/boot/dts/p1020rdb_camp_core1.dts | 141 ------------------ arch/powerpc/boot/dts/p2020rdb_camp_core0.dts | 67 --------- arch/powerpc/boot/dts/p2020rdb_camp_core1.dts | 125 ---------------- 4 files changed, 396 deletions(-) delete mode 100644 arch/powerpc/boot/dts/p1020rdb_camp_core0.dts delete mode 100644 arch/powerpc/boot/dts/p1020rdb_camp_core1.dts delete mode 100644 arch/powerpc/boot/dts/p2020rdb_camp_core0.dts delete mode 100644 arch/powerpc/boot/dts/p2020rdb_camp_core1.dts diff --git a/arch/powerpc/boot/dts/p1020rdb_camp_core0.dts b/arch/powerpc/boot/dts/p1020rdb_camp_core0.dts deleted file mode 100644 index 41b4585c5da8..000000000000 --- a/arch/powerpc/boot/dts/p1020rdb_camp_core0.dts +++ /dev/null @@ -1,63 +0,0 @@ -/* - * P1020 RDB Core0 Device Tree Source in CAMP mode. - * - * In CAMP mode, each core needs to have its own dts. Only mpic and L2 cache - * can be shared, all the other devices must be assigned to one core only. - * This dts file allows core0 to have memory, l2, i2c, spi, gpio, tdm, dma, usb, - * eth1, eth2, sdhc, crypto, global-util, message, pci0, pci1, msi. - * - * Please note to add "-b 0" for core0's dts compiling. - * - * Copyright 2011 Freescale Semiconductor Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -/include/ "p1020rdb.dts" - -/ { - model = "fsl,P1020RDB"; - compatible = "fsl,P1020RDB", "fsl,MPC85XXRDB-CAMP"; - - aliases { - ethernet1 = &enet1; - ethernet2 = &enet2; - serial0 = &serial0; - pci0 = &pci0; - pci1 = &pci1; - }; - - cpus { - PowerPC,P1020@1 { - status = "disabled"; - }; - }; - - memory { - device_type = "memory"; - }; - - localbus@ffe05000 { - status = "disabled"; - }; - - soc@ffe00000 { - serial1: serial@4600 { - status = "disabled"; - }; - - enet0: ethernet@b0000 { - status = "disabled"; - }; - - mpic: pic@40000 { - protected-sources = < - 42 29 30 34 /* serial1, enet0-queue-group0 */ - 17 18 24 45 /* enet0-queue-group1, crypto */ - >; - }; - }; -}; diff --git a/arch/powerpc/boot/dts/p1020rdb_camp_core1.dts b/arch/powerpc/boot/dts/p1020rdb_camp_core1.dts deleted file mode 100644 index 517453821884..000000000000 --- a/arch/powerpc/boot/dts/p1020rdb_camp_core1.dts +++ /dev/null @@ -1,141 +0,0 @@ -/* - * P1020 RDB Core1 Device Tree Source in CAMP mode. - * - * In CAMP mode, each core needs to have its own dts. Only mpic and L2 cache - * can be shared, all the other devices must be assigned to one core only. - * This dts allows core1 to have l2, eth0, crypto. - * - * Please note to add "-b 1" for core1's dts compiling. - * - * Copyright 2011 Freescale Semiconductor Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -/include/ "p1020rdb.dts" - -/ { - model = "fsl,P1020RDB"; - compatible = "fsl,P1020RDB", "fsl,MPC85XXRDB-CAMP"; - - aliases { - ethernet0 = &enet0; - serial0 = &serial1; - }; - - cpus { - PowerPC,P1020@0 { - status = "disabled"; - }; - }; - - memory { - device_type = "memory"; - }; - - localbus@ffe05000 { - status = "disabled"; - }; - - soc@ffe00000 { - ecm-law@0 { - status = "disabled"; - }; - - ecm@1000 { - status = "disabled"; - }; - - memory-controller@2000 { - status = "disabled"; - }; - - i2c@3000 { - status = "disabled"; - }; - - i2c@3100 { - status = "disabled"; - }; - - serial0: serial@4500 { - status = "disabled"; - }; - - spi@7000 { - status = "disabled"; - }; - - gpio: gpio-controller@f000 { - status = "disabled"; - }; - - dma@21300 { - status = "disabled"; - }; - - mdio@24000 { - status = "disabled"; - }; - - mdio@25000 { - status = "disabled"; - }; - - enet1: ethernet@b1000 { - status = "disabled"; - }; - - enet2: ethernet@b2000 { - status = "disabled"; - }; - - usb@22000 { - status = "disabled"; - }; - - sdhci@2e000 { - status = "disabled"; - }; - - mpic: pic@40000 { - protected-sources = < - 16 /* ecm, mem, L2, pci0, pci1 */ - 43 42 59 /* i2c, serial0, spi */ - 47 63 62 /* gpio, tdm */ - 20 21 22 23 /* dma */ - 03 02 /* mdio */ - 35 36 40 /* enet1-queue-group0 */ - 51 52 67 /* enet1-queue-group1 */ - 31 32 33 /* enet2-queue-group0 */ - 25 26 27 /* enet2-queue-group1 */ - 28 72 58 /* usb, sdhci, crypto */ - 0xb0 0xb1 0xb2 /* message */ - 0xb3 0xb4 0xb5 - 0xb6 0xb7 - 0xe0 0xe1 0xe2 /* msi */ - 0xe3 0xe4 0xe5 - 0xe6 0xe7 /* sdhci, crypto , pci */ - >; - }; - - msi@41600 { - status = "disabled"; - }; - - global-utilities@e0000 { //global utilities block - status = "disabled"; - }; - }; - - pci0: pcie@ffe09000 { - status = "disabled"; - }; - - pci1: pcie@ffe0a000 { - status = "disabled"; - }; -}; diff --git a/arch/powerpc/boot/dts/p2020rdb_camp_core0.dts b/arch/powerpc/boot/dts/p2020rdb_camp_core0.dts deleted file mode 100644 index 66aac864c4cc..000000000000 --- a/arch/powerpc/boot/dts/p2020rdb_camp_core0.dts +++ /dev/null @@ -1,67 +0,0 @@ -/* - * P2020 RDB Core0 Device Tree Source in CAMP mode. - * - * In CAMP mode, each core needs to have its own dts. Only mpic and L2 cache - * can be shared, all the other devices must be assigned to one core only. - * This dts file allows core0 to have memory, l2, i2c, spi, gpio, dma1, usb, - * eth1, eth2, sdhc, crypto, global-util, pci0. - * - * Copyright 2009-2011 Freescale Semiconductor Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -/include/ "p2020rdb.dts" - -/ { - model = "fsl,P2020RDB"; - compatible = "fsl,P2020RDB", "fsl,MPC85XXRDB-CAMP"; - - cpus { - PowerPC,P2020@1 { - status = "disabled"; - }; - }; - - localbus@ffe05000 { - status = "disabled"; - }; - - soc@ffe00000 { - serial1: serial@4600 { - status = "disabled"; - }; - - dma@c300 { - status = "disabled"; - }; - - enet0: ethernet@24000 { - status = "disabled"; - }; - - mpic: pic@40000 { - protected-sources = < - 42 76 77 78 79 /* serial1 , dma2 */ - 29 30 34 26 /* enet0, pci1 */ - 0xe0 0xe1 0xe2 0xe3 /* msi */ - 0xe4 0xe5 0xe6 0xe7 - >; - }; - - msi@41600 { - status = "disabled"; - }; - }; - - pci0: pcie@ffe08000 { - status = "disabled"; - }; - - pci2: pcie@ffe0a000 { - status = "disabled"; - }; -}; diff --git a/arch/powerpc/boot/dts/p2020rdb_camp_core1.dts b/arch/powerpc/boot/dts/p2020rdb_camp_core1.dts deleted file mode 100644 index 9bd8ef493dd2..000000000000 --- a/arch/powerpc/boot/dts/p2020rdb_camp_core1.dts +++ /dev/null @@ -1,125 +0,0 @@ -/* - * P2020 RDB Core1 Device Tree Source in CAMP mode. - * - * In CAMP mode, each core needs to have its own dts. Only mpic and L2 cache - * can be shared, all the other devices must be assigned to one core only. - * This dts allows core1 to have l2, dma2, eth0, pci1, msi. - * - * Please note to add "-b 1" for core1's dts compiling. - * - * Copyright 2009-2011 Freescale Semiconductor Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -/include/ "p2020rdb.dts" - -/ { - model = "fsl,P2020RDB"; - compatible = "fsl,P2020RDB", "fsl,MPC85XXRDB-CAMP"; - - cpus { - PowerPC,P2020@0 { - status = "disabled"; - }; - }; - - localbus@ffe05000 { - status = "disabled"; - }; - - soc@ffe00000 { - ecm-law@0 { - status = "disabled"; - }; - - ecm@1000 { - status = "disabled"; - }; - - memory-controller@2000 { - status = "disabled"; - }; - - i2c@3000 { - status = "disabled"; - }; - - i2c@3100 { - status = "disabled"; - }; - - serial0: serial@4500 { - status = "disabled"; - }; - - spi@7000 { - status = "disabled"; - }; - - gpio: gpio-controller@f000 { - status = "disabled"; - }; - - dma@21300 { - status = "disabled"; - }; - - usb@22000 { - status = "disabled"; - }; - - mdio@24520 { - status = "disabled"; - }; - - mdio@25520 { - status = "disabled"; - }; - - mdio@26520 { - status = "disabled"; - }; - - enet1: ethernet@25000 { - status = "disabled"; - }; - - enet2: ethernet@26000 { - status = "disabled"; - }; - - sdhci@2e000 { - status = "disabled"; - }; - - crypto@30000 { - status = "disabled"; - }; - - mpic: pic@40000 { - protected-sources = < - 17 18 43 42 59 47 /*ecm, mem, i2c, serial0, spi,gpio */ - 16 20 21 22 23 28 /* L2, dma1, USB */ - 03 35 36 40 31 32 33 /* mdio, enet1, enet2 */ - 72 45 58 25 /* sdhci, crypto , pci */ - >; - }; - - global-utilities@e0000 { //global utilities block - status = "disabled"; - }; - - }; - - pci0: pcie@ffe08000 { - status = "disabled"; - }; - - pci1: pcie@ffe09000 { - status = "disabled"; - }; -}; -- 2.34.1