From b48e4aa3e5ff6d2849f10f6619b591d8d1b0f2fd Mon Sep 17 00:00:00 2001 From: Don Skidmore Date: Sat, 29 Nov 2014 05:22:32 +0000 Subject: [PATCH] ixgbe: Add timeout parameter to ixgbe_host_interface_command Since on X550 we use host interface commands to read,write and erase some commands require more time to complete. So this adds a timeout parameter to ixgbe_host_interface_command as wells as a return_data parameter allowing us to return with any data. Signed-off-by: Don Skidmore Signed-off-by: Jeff Kirsher --- .../net/ethernet/intel/ixgbe/ixgbe_common.c | 41 ++++++++++++++----- drivers/net/ethernet/intel/ixgbe/ixgbe_type.h | 9 ++-- 2 files changed, 37 insertions(+), 13 deletions(-) diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c index 0e754b4c4220..7ed1e086c891 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c @@ -3446,23 +3446,34 @@ static u8 ixgbe_calculate_checksum(u8 *buffer, u32 length) * @buffer: contains the command to write and where the return status will * be placed * @length: length of buffer, must be multiple of 4 bytes + * @timeout: time in ms to wait for command completion + * @return_data: read and return data from the buffer (true) or not (false) + * Needed because FW structures are big endian and decoding of + * these fields can be 8 bit or 16 bit based on command. Decoding + * is not easily understood without making a table of commands. + * So we will leave this up to the caller to read back the data + * in these cases. * * Communicates with the manageability block. On success return 0 * else return IXGBE_ERR_HOST_INTERFACE_COMMAND. **/ static s32 ixgbe_host_interface_command(struct ixgbe_hw *hw, u32 *buffer, - u32 length) + u32 length, u32 timeout, + bool return_data) { - u32 hicr, i, bi; + u32 hicr, i, bi, fwsts; u32 hdr_size = sizeof(struct ixgbe_hic_hdr); - u8 buf_len, dword_len; + u16 buf_len, dword_len; - if (length == 0 || length & 0x3 || - length > IXGBE_HI_MAX_BLOCK_BYTE_LENGTH) { - hw_dbg(hw, "Buffer length failure.\n"); + if (length == 0 || length > IXGBE_HI_MAX_BLOCK_BYTE_LENGTH) { + hw_dbg(hw, "Buffer length failure buffersize-%d.\n", length); return IXGBE_ERR_HOST_INTERFACE_COMMAND; } + /* Set bit 9 of FWSTS clearing FW reset indication */ + fwsts = IXGBE_READ_REG(hw, IXGBE_FWSTS); + IXGBE_WRITE_REG(hw, IXGBE_FWSTS, fwsts | IXGBE_FWSTS_FWRI); + /* Check that the host interface is enabled. */ hicr = IXGBE_READ_REG(hw, IXGBE_HICR); if ((hicr & IXGBE_HICR_EN) == 0) { @@ -3470,7 +3481,12 @@ static s32 ixgbe_host_interface_command(struct ixgbe_hw *hw, u32 *buffer, return IXGBE_ERR_HOST_INTERFACE_COMMAND; } - /* Calculate length in DWORDs */ + /* Calculate length in DWORDs. We must be DWORD aligned */ + if ((length % (sizeof(u32))) != 0) { + hw_dbg(hw, "Buffer length failure, not aligned to dword"); + return IXGBE_ERR_INVALID_ARGUMENT; + } + dword_len = length >> 2; /* @@ -3484,7 +3500,7 @@ static s32 ixgbe_host_interface_command(struct ixgbe_hw *hw, u32 *buffer, /* Setting this bit tells the ARC that a new command is pending. */ IXGBE_WRITE_REG(hw, IXGBE_HICR, hicr | IXGBE_HICR_C); - for (i = 0; i < IXGBE_HI_COMMAND_TIMEOUT; i++) { + for (i = 0; i < timeout; i++) { hicr = IXGBE_READ_REG(hw, IXGBE_HICR); if (!(hicr & IXGBE_HICR_C)) break; @@ -3492,12 +3508,15 @@ static s32 ixgbe_host_interface_command(struct ixgbe_hw *hw, u32 *buffer, } /* Check command successful completion. */ - if (i == IXGBE_HI_COMMAND_TIMEOUT || + if ((timeout != 0 && i == timeout) || (!(IXGBE_READ_REG(hw, IXGBE_HICR) & IXGBE_HICR_SV))) { hw_dbg(hw, "Command has failed with no status valid.\n"); return IXGBE_ERR_HOST_INTERFACE_COMMAND; } + if (!return_data) + return 0; + /* Calculate length in DWORDs */ dword_len = hdr_size >> 2; @@ -3568,7 +3587,9 @@ s32 ixgbe_set_fw_drv_ver_generic(struct ixgbe_hw *hw, u8 maj, u8 min, for (i = 0; i <= FW_CEM_MAX_RETRIES; i++) { ret_val = ixgbe_host_interface_command(hw, (u32 *)&fw_cmd, - sizeof(fw_cmd)); + sizeof(fw_cmd), + IXGBE_HI_COMMAND_TIMEOUT, + true); if (ret_val != 0) continue; diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h index cc1ac04ce353..4ec6eadf4ed7 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h @@ -2314,9 +2314,12 @@ enum ixgbe_fdir_pballoc_type { #define IXGBE_FDIR_DROP_QUEUE 127 /* Manageablility Host Interface defines */ -#define IXGBE_HI_MAX_BLOCK_BYTE_LENGTH 1792 /* Num of bytes in range */ -#define IXGBE_HI_MAX_BLOCK_DWORD_LENGTH 448 /* Num of dwords in range */ -#define IXGBE_HI_COMMAND_TIMEOUT 500 /* Process HI command limit */ +#define IXGBE_HI_MAX_BLOCK_BYTE_LENGTH 1792 /* Num of bytes in range */ +#define IXGBE_HI_MAX_BLOCK_DWORD_LENGTH 448 /* Num of dwords in range */ +#define IXGBE_HI_COMMAND_TIMEOUT 500 /* Process HI command limit */ +#define IXGBE_HI_FLASH_ERASE_TIMEOUT 1000 /* Process Erase command limit */ +#define IXGBE_HI_FLASH_UPDATE_TIMEOUT 5000 /* Process Update command limit */ +#define IXGBE_HI_FLASH_APPLY_TIMEOUT 0 /* Process Apply command limit */ /* CEM Support */ #define FW_CEM_HDR_LEN 0x4 -- 2.34.1