From b49c22a6ca3656c68506fea57caf3d8f08878570 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Tue, 5 Apr 2016 13:28:24 -0700 Subject: [PATCH] cpufreq: Convert printk(KERN_ to pr_ Use the more common logging style. Miscellanea: o Coalesce formats o Realign arguments o Add a missing space between a coalesced format Signed-off-by: Joe Perches Acked-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/acpi-cpufreq.c | 10 +-- drivers/cpufreq/cpufreq-nforce2.c | 24 +++---- drivers/cpufreq/e_powersaver.c | 60 +++++++---------- drivers/cpufreq/elanfreq.c | 2 +- drivers/cpufreq/ia64-acpi-cpufreq.c | 9 ++- drivers/cpufreq/longhaul.c | 80 ++++++++++------------- drivers/cpufreq/loongson2_cpufreq.c | 2 +- drivers/cpufreq/maple-cpufreq.c | 9 ++- drivers/cpufreq/omap-cpufreq.c | 4 +- drivers/cpufreq/p4-clockmod.c | 15 +---- drivers/cpufreq/pmac32-cpufreq.c | 12 ++-- drivers/cpufreq/pmac64-cpufreq.c | 43 ++++++------ drivers/cpufreq/powernow-k6.c | 13 ++-- drivers/cpufreq/powernow-k7.c | 65 ++++++++---------- drivers/cpufreq/pxa2xx-cpufreq.c | 7 +- drivers/cpufreq/s3c2412-cpufreq.c | 13 ++-- drivers/cpufreq/s3c2440-cpufreq.c | 4 +- drivers/cpufreq/s3c24xx-cpufreq-debugfs.c | 2 +- drivers/cpufreq/s3c24xx-cpufreq.c | 57 ++++++++-------- drivers/cpufreq/s5pv210-cpufreq.c | 4 +- drivers/cpufreq/sc520_freq.c | 6 +- drivers/cpufreq/speedstep-centrino.c | 3 +- drivers/cpufreq/speedstep-ich.c | 6 +- drivers/cpufreq/speedstep-lib.c | 9 +-- drivers/cpufreq/speedstep-smi.c | 5 +- 25 files changed, 199 insertions(+), 265 deletions(-) diff --git a/drivers/cpufreq/acpi-cpufreq.c b/drivers/cpufreq/acpi-cpufreq.c index 7f38fb55f223..ed9e93df7ecf 100644 --- a/drivers/cpufreq/acpi-cpufreq.c +++ b/drivers/cpufreq/acpi-cpufreq.c @@ -648,10 +648,7 @@ static int acpi_cpufreq_blacklist(struct cpuinfo_x86 *c) if ((c->x86 == 15) && (c->x86_model == 6) && (c->x86_mask == 8)) { - printk(KERN_INFO "acpi-cpufreq: Intel(R) " - "Xeon(R) 7100 Errata AL30, processors may " - "lock up on frequency changes: disabling " - "acpi-cpufreq.\n"); + pr_info("acpi-cpufreq: Intel(R) Xeon(R) 7100 Errata AL30, processors may lock up on frequency changes: disabling acpi-cpufreq\n"); return -ENODEV; } } @@ -799,8 +796,7 @@ static int acpi_cpufreq_cpu_init(struct cpufreq_policy *policy) if (perf->control_register.space_id == ACPI_ADR_SPACE_FIXED_HARDWARE && policy->cpuinfo.transition_latency > 20 * 1000) { policy->cpuinfo.transition_latency = 20 * 1000; - printk_once(KERN_INFO - "P-state transition latency capped at 20 uS\n"); + pr_info_once("P-state transition latency capped at 20 uS\n"); } /* table init */ @@ -822,7 +818,7 @@ static int acpi_cpufreq_cpu_init(struct cpufreq_policy *policy) goto err_freqfree; if (perf->states[0].core_frequency * 1000 != policy->cpuinfo.max_freq) - printk(KERN_WARNING FW_WARN "P-state 0 is not max freq\n"); + pr_warn(FW_WARN "P-state 0 is not max freq\n"); switch (perf->control_register.space_id) { case ACPI_ADR_SPACE_SYSTEM_IO: diff --git a/drivers/cpufreq/cpufreq-nforce2.c b/drivers/cpufreq/cpufreq-nforce2.c index db69eeb501a7..7da96d536ac9 100644 --- a/drivers/cpufreq/cpufreq-nforce2.c +++ b/drivers/cpufreq/cpufreq-nforce2.c @@ -174,13 +174,13 @@ static int nforce2_set_fsb(unsigned int fsb) int pll = 0; if ((fsb > max_fsb) || (fsb < NFORCE2_MIN_FSB)) { - printk(KERN_ERR PFX "FSB %d is out of range!\n", fsb); + pr_err(PFX "FSB %d is out of range!\n", fsb); return -EINVAL; } tfsb = nforce2_fsb_read(0); if (!tfsb) { - printk(KERN_ERR PFX "Error while reading the FSB\n"); + pr_err(PFX "Error while reading the FSB\n"); return -EINVAL; } @@ -276,8 +276,7 @@ static int nforce2_target(struct cpufreq_policy *policy, /* local_irq_save(flags); */ if (nforce2_set_fsb(target_fsb) < 0) - printk(KERN_ERR PFX "Changing FSB to %d failed\n", - target_fsb); + pr_err(PFX "Changing FSB to %d failed\n", target_fsb); else pr_debug("Changed FSB successfully to %d\n", target_fsb); @@ -325,8 +324,7 @@ static int nforce2_cpu_init(struct cpufreq_policy *policy) /* FIX: Get FID from CPU */ if (!fid) { if (!cpu_khz) { - printk(KERN_WARNING PFX - "cpu_khz not set, can't calculate multiplier!\n"); + pr_warn(PFX "cpu_khz not set, can't calculate multiplier!\n"); return -ENODEV; } @@ -341,8 +339,8 @@ static int nforce2_cpu_init(struct cpufreq_policy *policy) } } - printk(KERN_INFO PFX "FSB currently at %i MHz, FID %d.%d\n", fsb, - fid / 10, fid % 10); + pr_info(PFX "FSB currently at %i MHz, FID %d.%d\n", + fsb, fid / 10, fid % 10); /* Set maximum FSB to FSB at boot time */ max_fsb = nforce2_fsb_read(1); @@ -401,11 +399,9 @@ static int nforce2_detect_chipset(void) if (nforce2_dev == NULL) return -ENODEV; - printk(KERN_INFO PFX "Detected nForce2 chipset revision %X\n", - nforce2_dev->revision); - printk(KERN_INFO PFX - "FSB changing is maybe unstable and can lead to " - "crashes and data loss.\n"); + pr_info(PFX "Detected nForce2 chipset revision %X\n", + nforce2_dev->revision); + pr_info(PFX "FSB changing is maybe unstable and can lead to crashes and data loss\n"); return 0; } @@ -423,7 +419,7 @@ static int __init nforce2_init(void) /* detect chipset */ if (nforce2_detect_chipset()) { - printk(KERN_INFO PFX "No nForce2 chipset.\n"); + pr_info(PFX "No nForce2 chipset\n"); return -ENODEV; } diff --git a/drivers/cpufreq/e_powersaver.c b/drivers/cpufreq/e_powersaver.c index 4085244c8a67..c420f0cb46a7 100644 --- a/drivers/cpufreq/e_powersaver.c +++ b/drivers/cpufreq/e_powersaver.c @@ -141,11 +141,9 @@ static int eps_set_state(struct eps_cpu_data *centaur, /* Print voltage and multiplier */ rdmsr(MSR_IA32_PERF_STATUS, lo, hi); current_voltage = lo & 0xff; - printk(KERN_INFO "eps: Current voltage = %dmV\n", - current_voltage * 16 + 700); + pr_info("eps: Current voltage = %dmV\n", current_voltage * 16 + 700); current_multiplier = (lo >> 8) & 0xff; - printk(KERN_INFO "eps: Current multiplier = %d\n", - current_multiplier); + pr_info("eps: Current multiplier = %d\n", current_multiplier); } #endif return 0; @@ -166,7 +164,7 @@ static int eps_target(struct cpufreq_policy *policy, unsigned int index) dest_state = centaur->freq_table[index].driver_data & 0xffff; ret = eps_set_state(centaur, policy, dest_state); if (ret) - printk(KERN_ERR "eps: Timeout!\n"); + pr_err("eps: Timeout!\n"); return ret; } @@ -194,36 +192,36 @@ static int eps_cpu_init(struct cpufreq_policy *policy) return -ENODEV; /* Check brand */ - printk(KERN_INFO "eps: Detected VIA "); + pr_info("eps: Detected VIA "); switch (c->x86_model) { case 10: rdmsr(0x1153, lo, hi); brand = (((lo >> 2) ^ lo) >> 18) & 3; - printk(KERN_CONT "Model A "); + pr_cont("Model A "); break; case 13: rdmsr(0x1154, lo, hi); brand = (((lo >> 4) ^ (lo >> 2))) & 0x000000ff; - printk(KERN_CONT "Model D "); + pr_cont("Model D "); break; } switch (brand) { case EPS_BRAND_C7M: - printk(KERN_CONT "C7-M\n"); + pr_cont("C7-M\n"); break; case EPS_BRAND_C7: - printk(KERN_CONT "C7\n"); + pr_cont("C7\n"); break; case EPS_BRAND_EDEN: - printk(KERN_CONT "Eden\n"); + pr_cont("Eden\n"); break; case EPS_BRAND_C7D: - printk(KERN_CONT "C7-D\n"); + pr_cont("C7-D\n"); break; case EPS_BRAND_C3: - printk(KERN_CONT "C3\n"); + pr_cont("C3\n"); return -ENODEV; break; } @@ -235,7 +233,7 @@ static int eps_cpu_init(struct cpufreq_policy *policy) /* Can be locked at 0 */ rdmsrl(MSR_IA32_MISC_ENABLE, val); if (!(val & MSR_IA32_MISC_ENABLE_ENHANCED_SPEEDSTEP)) { - printk(KERN_INFO "eps: Can't enable Enhanced PowerSaver\n"); + pr_info("eps: Can't enable Enhanced PowerSaver\n"); return -ENODEV; } } @@ -243,22 +241,19 @@ static int eps_cpu_init(struct cpufreq_policy *policy) /* Print voltage and multiplier */ rdmsr(MSR_IA32_PERF_STATUS, lo, hi); current_voltage = lo & 0xff; - printk(KERN_INFO "eps: Current voltage = %dmV\n", - current_voltage * 16 + 700); + pr_info("eps: Current voltage = %dmV\n", current_voltage * 16 + 700); current_multiplier = (lo >> 8) & 0xff; - printk(KERN_INFO "eps: Current multiplier = %d\n", current_multiplier); + pr_info("eps: Current multiplier = %d\n", current_multiplier); /* Print limits */ max_voltage = hi & 0xff; - printk(KERN_INFO "eps: Highest voltage = %dmV\n", - max_voltage * 16 + 700); + pr_info("eps: Highest voltage = %dmV\n", max_voltage * 16 + 700); max_multiplier = (hi >> 8) & 0xff; - printk(KERN_INFO "eps: Highest multiplier = %d\n", max_multiplier); + pr_info("eps: Highest multiplier = %d\n", max_multiplier); min_voltage = (hi >> 16) & 0xff; - printk(KERN_INFO "eps: Lowest voltage = %dmV\n", - min_voltage * 16 + 700); + pr_info("eps: Lowest voltage = %dmV\n", min_voltage * 16 + 700); min_multiplier = (hi >> 24) & 0xff; - printk(KERN_INFO "eps: Lowest multiplier = %d\n", min_multiplier); + pr_info("eps: Lowest multiplier = %d\n", min_multiplier); /* Sanity checks */ if (current_multiplier == 0 || max_multiplier == 0 @@ -276,17 +271,13 @@ static int eps_cpu_init(struct cpufreq_policy *policy) /* Check for systems using underclocked CPU */ if (!freq_failsafe_off && max_multiplier != current_multiplier) { - printk(KERN_INFO "eps: Your processor is running at different " - "frequency then its maximum. Aborting.\n"); - printk(KERN_INFO "eps: You can use freq_failsafe_off option " - "to disable this check.\n"); + pr_info("eps: Your processor is running at different frequency then its maximum. Aborting.\n"); + pr_info("eps: You can use freq_failsafe_off option to disable this check.\n"); return -EINVAL; } if (!voltage_failsafe_off && max_voltage != current_voltage) { - printk(KERN_INFO "eps: Your processor is running at different " - "voltage then its maximum. Aborting.\n"); - printk(KERN_INFO "eps: You can use voltage_failsafe_off " - "option to disable this check.\n"); + pr_info("eps: Your processor is running at different voltage then its maximum. Aborting.\n"); + pr_info("eps: You can use voltage_failsafe_off option to disable this check.\n"); return -EINVAL; } @@ -297,13 +288,13 @@ static int eps_cpu_init(struct cpufreq_policy *policy) /* Check for ACPI processor speed limit */ if (!ignore_acpi_limit && !eps_acpi_init()) { if (!acpi_processor_get_bios_limit(policy->cpu, &limit)) { - printk(KERN_INFO "eps: ACPI limit %u.%uGHz\n", + pr_info("eps: ACPI limit %u.%uGHz\n", limit/1000000, (limit%1000000)/10000); eps_acpi_exit(policy); /* Check if max_multiplier is in BIOS limits */ if (limit && max_multiplier * fsb > limit) { - printk(KERN_INFO "eps: Aborting.\n"); + pr_info("eps: Aborting\n"); return -EINVAL; } } @@ -319,8 +310,7 @@ static int eps_cpu_init(struct cpufreq_policy *policy) v = (set_max_voltage - 700) / 16; /* Check if voltage is within limits */ if (v >= min_voltage && v <= max_voltage) { - printk(KERN_INFO "eps: Setting %dmV as maximum.\n", - v * 16 + 700); + pr_info("eps: Setting %dmV as maximum\n", v * 16 + 700); max_voltage = v; } } diff --git a/drivers/cpufreq/elanfreq.c b/drivers/cpufreq/elanfreq.c index 1c06e786c9ba..8f4dded3016f 100644 --- a/drivers/cpufreq/elanfreq.c +++ b/drivers/cpufreq/elanfreq.c @@ -185,7 +185,7 @@ static int elanfreq_cpu_init(struct cpufreq_policy *policy) static int __init elanfreq_setup(char *str) { max_freq = simple_strtoul(str, &str, 0); - printk(KERN_WARNING "You're using the deprecated elanfreq command line option. Use elanfreq.max_freq instead, please!\n"); + pr_warn("You're using the deprecated elanfreq command line option. Use elanfreq.max_freq instead, please!\n"); return 1; } __setup("elanfreq=", elanfreq_setup); diff --git a/drivers/cpufreq/ia64-acpi-cpufreq.c b/drivers/cpufreq/ia64-acpi-cpufreq.c index 0202429f1c5b..fd36d6cd3787 100644 --- a/drivers/cpufreq/ia64-acpi-cpufreq.c +++ b/drivers/cpufreq/ia64-acpi-cpufreq.c @@ -118,8 +118,7 @@ processor_get_freq ( if (ret) { set_cpus_allowed_ptr(current, &saved_mask); - printk(KERN_WARNING "get performance failed with error %d\n", - ret); + pr_warn("get performance failed with error %d\n", ret); ret = 0; goto migrate_end; } @@ -177,7 +176,7 @@ processor_set_freq ( ret = processor_set_pstate(value); if (ret) { - printk(KERN_WARNING "Transition failed with error %d\n", ret); + pr_warn("Transition failed with error %d\n", ret); retval = -ENODEV; goto migrate_end; } @@ -291,8 +290,8 @@ acpi_cpufreq_cpu_init ( /* notify BIOS that we exist */ acpi_processor_notify_smm(THIS_MODULE); - printk(KERN_INFO "acpi-cpufreq: CPU%u - ACPI performance management " - "activated.\n", cpu); + pr_info("acpi-cpufreq: CPU%u - ACPI performance management activated\n", + cpu); for (i = 0; i < data->acpi_data.state_count; i++) pr_debug(" %cP%d: %d MHz, %d mW, %d uS, %d uS, 0x%x 0x%x\n", diff --git a/drivers/cpufreq/longhaul.c b/drivers/cpufreq/longhaul.c index 0f6b229afcb9..2baeb8c01474 100644 --- a/drivers/cpufreq/longhaul.c +++ b/drivers/cpufreq/longhaul.c @@ -347,14 +347,13 @@ retry_loop: freqs.new = calc_speed(longhaul_get_cpu_mult()); /* Check if requested frequency is set. */ if (unlikely(freqs.new != speed)) { - printk(KERN_INFO PFX "Failed to set requested frequency!\n"); + pr_info(PFX "Failed to set requested frequency!\n"); /* Revision ID = 1 but processor is expecting revision key * equal to 0. Jumpers at the bottom of processor will change * multiplier and FSB, but will not change bits in Longhaul * MSR nor enable voltage scaling. */ if (!revid_errata) { - printk(KERN_INFO PFX "Enabling \"Ignore Revision ID\" " - "option.\n"); + pr_info(PFX "Enabling \"Ignore Revision ID\" option\n"); revid_errata = 1; msleep(200); goto retry_loop; @@ -364,11 +363,10 @@ retry_loop: * but it doesn't change frequency. I tried poking various * bits in northbridge registers, but without success. */ if (longhaul_flags & USE_ACPI_C3) { - printk(KERN_INFO PFX "Disabling ACPI C3 support.\n"); + pr_info(PFX "Disabling ACPI C3 support\n"); longhaul_flags &= ~USE_ACPI_C3; if (revid_errata) { - printk(KERN_INFO PFX "Disabling \"Ignore " - "Revision ID\" option.\n"); + pr_info(PFX "Disabling \"Ignore Revision ID\" option\n"); revid_errata = 0; } msleep(200); @@ -379,7 +377,7 @@ retry_loop: * RevID = 1. RevID errata will make things right. Just * to be 100% sure. */ if (longhaul_version == TYPE_LONGHAUL_V2) { - printk(KERN_INFO PFX "Switching to Longhaul ver. 1\n"); + pr_info(PFX "Switching to Longhaul ver. 1\n"); longhaul_version = TYPE_LONGHAUL_V1; msleep(200); goto retry_loop; @@ -387,8 +385,7 @@ retry_loop: } if (!bm_timeout) { - printk(KERN_INFO PFX "Warning: Timeout while waiting for " - "idle PCI bus.\n"); + pr_info(PFX "Warning: Timeout while waiting for idle PCI bus\n"); return -EBUSY; } @@ -433,12 +430,12 @@ static int longhaul_get_ranges(void) /* Get current frequency */ mult = longhaul_get_cpu_mult(); if (mult == -1) { - printk(KERN_INFO PFX "Invalid (reserved) multiplier!\n"); + pr_info(PFX "Invalid (reserved) multiplier!\n"); return -EINVAL; } fsb = guess_fsb(mult); if (fsb == 0) { - printk(KERN_INFO PFX "Invalid (reserved) FSB!\n"); + pr_info(PFX "Invalid (reserved) FSB!\n"); return -EINVAL; } /* Get max multiplier - as we always did. @@ -468,11 +465,11 @@ static int longhaul_get_ranges(void) print_speed(highest_speed/1000)); if (lowest_speed == highest_speed) { - printk(KERN_INFO PFX "highestspeed == lowest, aborting.\n"); + pr_info(PFX "highestspeed == lowest, aborting\n"); return -EINVAL; } if (lowest_speed > highest_speed) { - printk(KERN_INFO PFX "nonsense! lowest (%d > %d) !\n", + pr_info(PFX "nonsense! lowest (%d > %d) !\n", lowest_speed, highest_speed); return -EINVAL; } @@ -538,16 +535,16 @@ static void longhaul_setup_voltagescaling(void) rdmsrl(MSR_VIA_LONGHAUL, longhaul.val); if (!(longhaul.bits.RevisionID & 1)) { - printk(KERN_INFO PFX "Voltage scaling not supported by CPU.\n"); + pr_info(PFX "Voltage scaling not supported by CPU\n"); return; } if (!longhaul.bits.VRMRev) { - printk(KERN_INFO PFX "VRM 8.5\n"); + pr_info(PFX "VRM 8.5\n"); vrm_mV_table = &vrm85_mV[0]; mV_vrm_table = &mV_vrm85[0]; } else { - printk(KERN_INFO PFX "Mobile VRM\n"); + pr_info(PFX "Mobile VRM\n"); if (cpu_model < CPU_NEHEMIAH) return; vrm_mV_table = &mobilevrm_mV[0]; @@ -558,27 +555,21 @@ static void longhaul_setup_voltagescaling(void) maxvid = vrm_mV_table[longhaul.bits.MaximumVID]; if (minvid.mV == 0 || maxvid.mV == 0 || minvid.mV > maxvid.mV) { - printk(KERN_INFO PFX "Bogus values Min:%d.%03d Max:%d.%03d. " - "Voltage scaling disabled.\n", - minvid.mV/1000, minvid.mV%1000, - maxvid.mV/1000, maxvid.mV%1000); + pr_info(PFX "Bogus values Min:%d.%03d Max:%d.%03d - Voltage scaling disabled\n", + minvid.mV/1000, minvid.mV%1000, + maxvid.mV/1000, maxvid.mV%1000); return; } if (minvid.mV == maxvid.mV) { - printk(KERN_INFO PFX "Claims to support voltage scaling but " - "min & max are both %d.%03d. " - "Voltage scaling disabled\n", - maxvid.mV/1000, maxvid.mV%1000); + pr_info(PFX "Claims to support voltage scaling but min & max are both %d.%03d - Voltage scaling disabled\n", + maxvid.mV/1000, maxvid.mV%1000); return; } /* How many voltage steps*/ numvscales = maxvid.pos - minvid.pos + 1; - printk(KERN_INFO PFX - "Max VID=%d.%03d " - "Min VID=%d.%03d, " - "%d possible voltage scales\n", + pr_info(PFX "Max VID=%d.%03d Min VID=%d.%03d, %d possible voltage scales\n", maxvid.mV/1000, maxvid.mV%1000, minvid.mV/1000, minvid.mV%1000, numvscales); @@ -617,12 +608,12 @@ static void longhaul_setup_voltagescaling(void) pos = minvid.pos; freq_pos->driver_data |= mV_vrm_table[pos] << 8; vid = vrm_mV_table[mV_vrm_table[pos]]; - printk(KERN_INFO PFX "f: %d kHz, index: %d, vid: %d mV\n", + pr_info(PFX "f: %d kHz, index: %d, vid: %d mV\n", speed, (int)(freq_pos - longhaul_table), vid.mV); } can_scale_voltage = 1; - printk(KERN_INFO PFX "Voltage scaling enabled.\n"); + pr_info(PFX "Voltage scaling enabled\n"); } @@ -720,8 +711,7 @@ static int enable_arbiter_disable(void) pci_write_config_byte(dev, reg, pci_cmd); pci_read_config_byte(dev, reg, &pci_cmd); if (!(pci_cmd & 1<<7)) { - printk(KERN_ERR PFX - "Can't enable access to port 0x22.\n"); + pr_err(PFX "Can't enable access to port 0x22\n"); status = 0; } } @@ -758,8 +748,7 @@ static int longhaul_setup_southbridge(void) if (pci_cmd & 1 << 7) { pci_read_config_dword(dev, 0x88, &acpi_regs_addr); acpi_regs_addr &= 0xff00; - printk(KERN_INFO PFX "ACPI I/O at 0x%x\n", - acpi_regs_addr); + pr_info(PFX "ACPI I/O at 0x%x\n", acpi_regs_addr); } pci_dev_put(dev); @@ -853,14 +842,14 @@ static int longhaul_cpu_init(struct cpufreq_policy *policy) longhaul_version = TYPE_LONGHAUL_V1; } - printk(KERN_INFO PFX "VIA %s CPU detected. ", cpuname); + pr_info(PFX "VIA %s CPU detected. ", cpuname); switch (longhaul_version) { case TYPE_LONGHAUL_V1: case TYPE_LONGHAUL_V2: - printk(KERN_CONT "Longhaul v%d supported.\n", longhaul_version); + pr_cont("Longhaul v%d supported\n", longhaul_version); break; case TYPE_POWERSAVER: - printk(KERN_CONT "Powersaver supported.\n"); + pr_cont("Powersaver supported\n"); break; }; @@ -889,15 +878,14 @@ static int longhaul_cpu_init(struct cpufreq_policy *policy) if (!(longhaul_flags & USE_ACPI_C3 || longhaul_flags & USE_NORTHBRIDGE) && ((pr == NULL) || !(pr->flags.bm_control))) { - printk(KERN_ERR PFX - "No ACPI support. Unsupported northbridge.\n"); + pr_err(PFX "No ACPI support: Unsupported northbridge\n"); return -ENODEV; } if (longhaul_flags & USE_NORTHBRIDGE) - printk(KERN_INFO PFX "Using northbridge support.\n"); + pr_info(PFX "Using northbridge support\n"); if (longhaul_flags & USE_ACPI_C3) - printk(KERN_INFO PFX "Using ACPI support.\n"); + pr_info(PFX "Using ACPI support\n"); ret = longhaul_get_ranges(); if (ret != 0) @@ -934,20 +922,18 @@ static int __init longhaul_init(void) return -ENODEV; if (!enable) { - printk(KERN_ERR PFX "Option \"enable\" not set. Aborting.\n"); + pr_err(PFX "Option \"enable\" not set - Aborting\n"); return -ENODEV; } #ifdef CONFIG_SMP if (num_online_cpus() > 1) { - printk(KERN_ERR PFX "More than 1 CPU detected, " - "longhaul disabled.\n"); + pr_err(PFX "More than 1 CPU detected, longhaul disabled\n"); return -ENODEV; } #endif #ifdef CONFIG_X86_IO_APIC if (cpu_has_apic) { - printk(KERN_ERR PFX "APIC detected. Longhaul is currently " - "broken in this configuration.\n"); + pr_err(PFX "APIC detected. Longhaul is currently broken in this configuration.\n"); return -ENODEV; } #endif @@ -955,7 +941,7 @@ static int __init longhaul_init(void) case 6 ... 9: return cpufreq_register_driver(&longhaul_driver); case 10: - printk(KERN_ERR PFX "Use acpi-cpufreq driver for VIA C7\n"); + pr_err(PFX "Use acpi-cpufreq driver for VIA C7\n"); default: ; } diff --git a/drivers/cpufreq/loongson2_cpufreq.c b/drivers/cpufreq/loongson2_cpufreq.c index cd593c1f66dc..93c7928cf461 100644 --- a/drivers/cpufreq/loongson2_cpufreq.c +++ b/drivers/cpufreq/loongson2_cpufreq.c @@ -76,7 +76,7 @@ static int loongson2_cpufreq_cpu_init(struct cpufreq_policy *policy) cpuclk = clk_get(NULL, "cpu_clk"); if (IS_ERR(cpuclk)) { - printk(KERN_ERR "cpufreq: couldn't get CPU clk\n"); + pr_err("cpufreq: couldn't get CPU clk\n"); return PTR_ERR(cpuclk); } diff --git a/drivers/cpufreq/maple-cpufreq.c b/drivers/cpufreq/maple-cpufreq.c index cc3408fc073f..7e55632291d7 100644 --- a/drivers/cpufreq/maple-cpufreq.c +++ b/drivers/cpufreq/maple-cpufreq.c @@ -174,7 +174,7 @@ static int __init maple_cpufreq_init(void) /* Get first CPU node */ cpunode = of_cpu_device_node_get(0); if (cpunode == NULL) { - printk(KERN_ERR "cpufreq: Can't find any CPU 0 node\n"); + pr_err("cpufreq: Can't find any CPU 0 node\n"); goto bail_noprops; } @@ -182,8 +182,7 @@ static int __init maple_cpufreq_init(void) /* we actually don't care on which CPU to access PVR */ pvr_hi = PVR_VER(mfspr(SPRN_PVR)); if (pvr_hi != 0x3c && pvr_hi != 0x44) { - printk(KERN_ERR "cpufreq: Unsupported CPU version (%x)\n", - pvr_hi); + pr_err("cpufreq: Unsupported CPU version (%x)\n", pvr_hi); goto bail_noprops; } @@ -222,8 +221,8 @@ static int __init maple_cpufreq_init(void) maple_pmode_cur = -1; maple_scom_switch_freq(maple_scom_query_freq()); - printk(KERN_INFO "Registering Maple CPU frequency driver\n"); - printk(KERN_INFO "Low: %d Mhz, High: %d Mhz, Cur: %d MHz\n", + pr_info("Registering Maple CPU frequency driver\n"); + pr_info("Low: %d Mhz, High: %d Mhz, Cur: %d MHz\n", maple_cpu_freqs[1].frequency/1000, maple_cpu_freqs[0].frequency/1000, maple_cpu_freqs[maple_pmode_cur].frequency/1000); diff --git a/drivers/cpufreq/omap-cpufreq.c b/drivers/cpufreq/omap-cpufreq.c index e3866e0d5bf8..655fc9427626 100644 --- a/drivers/cpufreq/omap-cpufreq.c +++ b/drivers/cpufreq/omap-cpufreq.c @@ -163,13 +163,13 @@ static int omap_cpufreq_probe(struct platform_device *pdev) { mpu_dev = get_cpu_device(0); if (!mpu_dev) { - pr_warning("%s: unable to get the mpu device\n", __func__); + pr_warn("%s: unable to get the mpu device\n", __func__); return -EINVAL; } mpu_reg = regulator_get(mpu_dev, "vcc"); if (IS_ERR(mpu_reg)) { - pr_warning("%s: unable to get MPU regulator\n", __func__); + pr_warn("%s: unable to get MPU regulator\n", __func__); mpu_reg = NULL; } else { /* diff --git a/drivers/cpufreq/p4-clockmod.c b/drivers/cpufreq/p4-clockmod.c index 5dd95dab580d..4d1a44370338 100644 --- a/drivers/cpufreq/p4-clockmod.c +++ b/drivers/cpufreq/p4-clockmod.c @@ -124,11 +124,7 @@ static unsigned int cpufreq_p4_get_frequency(struct cpuinfo_x86 *c) { if (c->x86 == 0x06) { if (cpu_has(c, X86_FEATURE_EST)) - printk_once(KERN_WARNING PFX "Warning: EST-capable " - "CPU detected. The acpi-cpufreq module offers " - "voltage scaling in addition to frequency " - "scaling. You should use that instead of " - "p4-clockmod, if possible.\n"); + pr_warn_once(PFX "Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition to frequency scaling. You should use that instead of p4-clockmod, if possible.\n"); switch (c->x86_model) { case 0x0E: /* Core */ case 0x0F: /* Core Duo */ @@ -152,11 +148,7 @@ static unsigned int cpufreq_p4_get_frequency(struct cpuinfo_x86 *c) p4clockmod_driver.flags |= CPUFREQ_CONST_LOOPS; if (speedstep_detect_processor() == SPEEDSTEP_CPU_P4M) { - printk(KERN_WARNING PFX "Warning: Pentium 4-M detected. " - "The speedstep-ich or acpi cpufreq modules offer " - "voltage scaling in addition of frequency scaling. " - "You should use either one instead of p4-clockmod, " - "if possible.\n"); + pr_warn(PFX "Warning: Pentium 4-M detected. The speedstep-ich or acpi cpufreq modules offer voltage scaling in addition of frequency scaling. You should use either one instead of p4-clockmod, if possible.\n"); return speedstep_get_frequency(SPEEDSTEP_CPU_P4M); } @@ -265,8 +257,7 @@ static int __init cpufreq_p4_init(void) ret = cpufreq_register_driver(&p4clockmod_driver); if (!ret) - printk(KERN_INFO PFX "P4/Xeon(TM) CPU On-Demand Clock " - "Modulation available\n"); + pr_info(PFX "P4/Xeon(TM) CPU On-Demand Clock Modulation available\n"); return ret; } diff --git a/drivers/cpufreq/pmac32-cpufreq.c b/drivers/cpufreq/pmac32-cpufreq.c index 1f49d97a70ea..072d7b3841b9 100644 --- a/drivers/cpufreq/pmac32-cpufreq.c +++ b/drivers/cpufreq/pmac32-cpufreq.c @@ -481,13 +481,13 @@ static int pmac_cpufreq_init_MacRISC3(struct device_node *cpunode) freqs = of_get_property(cpunode, "bus-frequencies", &lenp); lenp /= sizeof(u32); if (freqs == NULL || lenp != 2) { - printk(KERN_ERR "cpufreq: bus-frequencies incorrect or missing\n"); + pr_err("cpufreq: bus-frequencies incorrect or missing\n"); return 1; } ratio = of_get_property(cpunode, "processor-to-bus-ratio*2", NULL); if (ratio == NULL) { - printk(KERN_ERR "cpufreq: processor-to-bus-ratio*2 missing\n"); + pr_err("cpufreq: processor-to-bus-ratio*2 missing\n"); return 1; } @@ -550,7 +550,7 @@ static int pmac_cpufreq_init_7447A(struct device_node *cpunode) if (volt_gpio_np) voltage_gpio = read_gpio(volt_gpio_np); if (!voltage_gpio){ - printk(KERN_ERR "cpufreq: missing cpu-vcore-select gpio\n"); + pr_err("cpufreq: missing cpu-vcore-select gpio\n"); return 1; } @@ -675,9 +675,9 @@ out: pmac_cpu_freqs[CPUFREQ_HIGH].frequency = hi_freq; ppc_proc_freq = cur_freq * 1000ul; - printk(KERN_INFO "Registering PowerMac CPU frequency driver\n"); - printk(KERN_INFO "Low: %d Mhz, High: %d Mhz, Boot: %d Mhz\n", - low_freq/1000, hi_freq/1000, cur_freq/1000); + pr_info("Registering PowerMac CPU frequency driver\n"); + pr_info("Low: %d Mhz, High: %d Mhz, Boot: %d Mhz\n", + low_freq/1000, hi_freq/1000, cur_freq/1000); return cpufreq_register_driver(&pmac_cpufreq_driver); } diff --git a/drivers/cpufreq/pmac64-cpufreq.c b/drivers/cpufreq/pmac64-cpufreq.c index 4ff86878727f..5ffe0855ba8f 100644 --- a/drivers/cpufreq/pmac64-cpufreq.c +++ b/drivers/cpufreq/pmac64-cpufreq.c @@ -138,7 +138,7 @@ static void g5_vdnap_switch_volt(int speed_mode) usleep_range(1000, 1000); } if (done == 0) - printk(KERN_WARNING "cpufreq: Timeout in clock slewing !\n"); + pr_warn("cpufreq: Timeout in clock slewing !\n"); } @@ -266,7 +266,7 @@ static int g5_pfunc_switch_freq(int speed_mode) rc = pmf_call_one(pfunc_cpu_setfreq_low, NULL); if (rc) - printk(KERN_WARNING "cpufreq: pfunc switch error %d\n", rc); + pr_warn("cpufreq: pfunc switch error %d\n", rc); /* It's an irq GPIO so we should be able to just block here, * I'll do that later after I've properly tested the IRQ code for @@ -282,7 +282,7 @@ static int g5_pfunc_switch_freq(int speed_mode) usleep_range(500, 500); } if (done == 0) - printk(KERN_WARNING "cpufreq: Timeout in clock slewing !\n"); + pr_warn("cpufreq: Timeout in clock slewing !\n"); /* If frequency is going down, last ramp the voltage */ if (speed_mode > g5_pmode_cur) @@ -368,7 +368,7 @@ static int __init g5_neo2_cpufreq_init(struct device_node *cpunode) } pvr_hi = (*valp) >> 16; if (pvr_hi != 0x3c && pvr_hi != 0x44) { - printk(KERN_ERR "cpufreq: Unsupported CPU version\n"); + pr_err("cpufreq: Unsupported CPU version\n"); goto bail_noprops; } @@ -403,8 +403,7 @@ static int __init g5_neo2_cpufreq_init(struct device_node *cpunode) root = of_find_node_by_path("/"); if (root == NULL) { - printk(KERN_ERR "cpufreq: Can't find root of " - "device tree\n"); + pr_err("cpufreq: Can't find root of device tree\n"); goto bail_noprops; } pfunc_set_vdnap0 = pmf_find_function(root, "set-vdnap0"); @@ -412,8 +411,7 @@ static int __init g5_neo2_cpufreq_init(struct device_node *cpunode) pmf_find_function(root, "slewing-done"); if (pfunc_set_vdnap0 == NULL || pfunc_vdnap0_complete == NULL) { - printk(KERN_ERR "cpufreq: Can't find required " - "platform function\n"); + pr_err("cpufreq: Can't find required platform function\n"); goto bail_noprops; } @@ -453,10 +451,10 @@ static int __init g5_neo2_cpufreq_init(struct device_node *cpunode) g5_pmode_cur = -1; g5_switch_freq(g5_query_freq()); - printk(KERN_INFO "Registering G5 CPU frequency driver\n"); - printk(KERN_INFO "Frequency method: %s, Voltage method: %s\n", - freq_method, volt_method); - printk(KERN_INFO "Low: %d Mhz, High: %d Mhz, Cur: %d MHz\n", + pr_info("Registering G5 CPU frequency driver\n"); + pr_info("Frequency method: %s, Voltage method: %s\n", + freq_method, volt_method); + pr_info("Low: %d Mhz, High: %d Mhz, Cur: %d MHz\n", g5_cpu_freqs[1].frequency/1000, g5_cpu_freqs[0].frequency/1000, g5_cpu_freqs[g5_pmode_cur].frequency/1000); @@ -493,7 +491,7 @@ static int __init g5_pm72_cpufreq_init(struct device_node *cpunode) if (cpuid != NULL) eeprom = of_get_property(cpuid, "cpuid", NULL); if (eeprom == NULL) { - printk(KERN_ERR "cpufreq: Can't find cpuid EEPROM !\n"); + pr_err("cpufreq: Can't find cpuid EEPROM !\n"); rc = -ENODEV; goto bail; } @@ -511,7 +509,7 @@ static int __init g5_pm72_cpufreq_init(struct device_node *cpunode) break; } if (hwclock == NULL) { - printk(KERN_ERR "cpufreq: Can't find i2c clock chip !\n"); + pr_err("cpufreq: Can't find i2c clock chip !\n"); rc = -ENODEV; goto bail; } @@ -539,7 +537,7 @@ static int __init g5_pm72_cpufreq_init(struct device_node *cpunode) /* Check we have minimum requirements */ if (pfunc_cpu_getfreq == NULL || pfunc_cpu_setfreq_high == NULL || pfunc_cpu_setfreq_low == NULL || pfunc_slewing_done == NULL) { - printk(KERN_ERR "cpufreq: Can't find platform functions !\n"); + pr_err("cpufreq: Can't find platform functions !\n"); rc = -ENODEV; goto bail; } @@ -567,7 +565,7 @@ static int __init g5_pm72_cpufreq_init(struct device_node *cpunode) /* Get max frequency from device-tree */ valp = of_get_property(cpunode, "clock-frequency", NULL); if (!valp) { - printk(KERN_ERR "cpufreq: Can't find CPU frequency !\n"); + pr_err("cpufreq: Can't find CPU frequency !\n"); rc = -ENODEV; goto bail; } @@ -583,8 +581,7 @@ static int __init g5_pm72_cpufreq_init(struct device_node *cpunode) /* Check for machines with no useful settings */ if (il == ih) { - printk(KERN_WARNING "cpufreq: No low frequency mode available" - " on this model !\n"); + pr_warn("cpufreq: No low frequency mode available on this model !\n"); rc = -ENODEV; goto bail; } @@ -595,7 +592,7 @@ static int __init g5_pm72_cpufreq_init(struct device_node *cpunode) /* Sanity check */ if (min_freq >= max_freq || min_freq < 1000) { - printk(KERN_ERR "cpufreq: Can't calculate low frequency !\n"); + pr_err("cpufreq: Can't calculate low frequency !\n"); rc = -ENXIO; goto bail; } @@ -619,10 +616,10 @@ static int __init g5_pm72_cpufreq_init(struct device_node *cpunode) g5_pmode_cur = -1; g5_switch_freq(g5_query_freq()); - printk(KERN_INFO "Registering G5 CPU frequency driver\n"); - printk(KERN_INFO "Frequency method: i2c/pfunc, " - "Voltage method: %s\n", has_volt ? "i2c/pfunc" : "none"); - printk(KERN_INFO "Low: %d Mhz, High: %d Mhz, Cur: %d MHz\n", + pr_info("Registering G5 CPU frequency driver\n"); + pr_info("Frequency method: i2c/pfunc, Voltage method: %s\n", + has_volt ? "i2c/pfunc" : "none"); + pr_info("Low: %d Mhz, High: %d Mhz, Cur: %d MHz\n", g5_cpu_freqs[1].frequency/1000, g5_cpu_freqs[0].frequency/1000, g5_cpu_freqs[g5_pmode_cur].frequency/1000); diff --git a/drivers/cpufreq/powernow-k6.c b/drivers/cpufreq/powernow-k6.c index e6f24b281e3e..981f40b1caf4 100644 --- a/drivers/cpufreq/powernow-k6.c +++ b/drivers/cpufreq/powernow-k6.c @@ -141,7 +141,7 @@ static int powernow_k6_target(struct cpufreq_policy *policy, { if (clock_ratio[best_i].driver_data > max_multiplier) { - printk(KERN_ERR PFX "invalid target frequency\n"); + pr_err(PFX "invalid target frequency\n"); return -EINVAL; } @@ -175,13 +175,14 @@ static int powernow_k6_cpu_init(struct cpufreq_policy *policy) max_multiplier = param_max_multiplier; goto have_max_multiplier; } - printk(KERN_ERR "powernow-k6: invalid max_multiplier parameter, valid parameters 20, 30, 35, 40, 45, 50, 55, 60\n"); + pr_err("powernow-k6: invalid max_multiplier parameter, valid parameters 20, 30, 35, 40, 45, 50, 55, 60\n"); return -EINVAL; } if (!max_multiplier) { - printk(KERN_WARNING "powernow-k6: unknown frequency %u, cannot determine current multiplier\n", khz); - printk(KERN_WARNING "powernow-k6: use module parameters max_multiplier and bus_frequency\n"); + pr_warn("powernow-k6: unknown frequency %u, cannot determine current multiplier\n", + khz); + pr_warn("powernow-k6: use module parameters max_multiplier and bus_frequency\n"); return -EOPNOTSUPP; } @@ -193,7 +194,7 @@ have_max_multiplier: busfreq = param_busfreq / 10; goto have_busfreq; } - printk(KERN_ERR "powernow-k6: invalid bus_frequency parameter, allowed range 50000 - 150000 kHz\n"); + pr_err("powernow-k6: invalid bus_frequency parameter, allowed range 50000 - 150000 kHz\n"); return -EINVAL; } @@ -275,7 +276,7 @@ static int __init powernow_k6_init(void) return -ENODEV; if (!request_region(POWERNOW_IOPORT, 16, "PowerNow!")) { - printk(KERN_INFO PFX "PowerNow IOPORT region already used.\n"); + pr_info(PFX "PowerNow IOPORT region already used\n"); return -EIO; } diff --git a/drivers/cpufreq/powernow-k7.c b/drivers/cpufreq/powernow-k7.c index c1ae1999770a..4a1b420da72e 100644 --- a/drivers/cpufreq/powernow-k7.c +++ b/drivers/cpufreq/powernow-k7.c @@ -127,14 +127,13 @@ static int check_powernow(void) maxei = cpuid_eax(0x80000000); if (maxei < 0x80000007) { /* Any powernow info ? */ #ifdef MODULE - printk(KERN_INFO PFX "No powernow capabilities detected\n"); + pr_info(PFX "No powernow capabilities detected\n"); #endif return 0; } if ((c->x86_model == 6) && (c->x86_mask == 0)) { - printk(KERN_INFO PFX "K7 660[A0] core detected, " - "enabling errata workarounds\n"); + pr_info(PFX "K7 660[A0] core detected, enabling errata workarounds\n"); have_a0 = 1; } @@ -144,22 +143,22 @@ static int check_powernow(void) if (!(edx & (1 << 1 | 1 << 2))) return 0; - printk(KERN_INFO PFX "PowerNOW! Technology present. Can scale: "); + pr_info(PFX "PowerNOW! Technology present. Can scale: "); if (edx & 1 << 1) { - printk("frequency"); + pr_cont("frequency"); can_scale_bus = 1; } if ((edx & (1 << 1 | 1 << 2)) == 0x6) - printk(" and "); + pr_cont(" and "); if (edx & 1 << 2) { - printk("voltage"); + pr_cont("voltage"); can_scale_vid = 1; } - printk(".\n"); + pr_cont("\n"); return 1; } @@ -427,16 +426,14 @@ err1: err05: kfree(acpi_processor_perf); err0: - printk(KERN_WARNING PFX "ACPI perflib can not be used on " - "this platform\n"); + pr_warn(PFX "ACPI perflib can not be used on this platform\n"); acpi_processor_perf = NULL; return retval; } #else static int powernow_acpi_init(void) { - printk(KERN_INFO PFX "no support for ACPI processor found." - " Please recompile your kernel with ACPI processor\n"); + pr_info(PFX "no support for ACPI processor found - please recompile your kernel with ACPI processor\n"); return -EINVAL; } #endif @@ -468,8 +465,7 @@ static int powernow_decode_bios(int maxfid, int startvid) psb = (struct psb_s *) p; pr_debug("Table version: 0x%x\n", psb->tableversion); if (psb->tableversion != 0x12) { - printk(KERN_INFO PFX "Sorry, only v1.2 tables" - " supported right now\n"); + pr_info(PFX "Sorry, only v1.2 tables supported right now\n"); return -ENODEV; } @@ -481,10 +477,8 @@ static int powernow_decode_bios(int maxfid, int startvid) latency = psb->settlingtime; if (latency < 100) { - printk(KERN_INFO PFX "BIOS set settling time " - "to %d microseconds. " - "Should be at least 100. " - "Correcting.\n", latency); + pr_info(PFX "BIOS set settling time to %d microseconds. Should be at least 100. Correcting.\n", + latency); latency = 100; } pr_debug("Settling Time: %d microseconds.\n", @@ -516,10 +510,9 @@ static int powernow_decode_bios(int maxfid, int startvid) p += 2; } } - printk(KERN_INFO PFX "No PST tables match this cpuid " - "(0x%x)\n", etuple); - printk(KERN_INFO PFX "This is indicative of a broken " - "BIOS.\n"); + pr_info(PFX "No PST tables match this cpuid (0x%x)\n", + etuple); + pr_info(PFX "This is indicative of a broken BIOS\n"); return -EINVAL; } @@ -552,7 +545,7 @@ static int fixup_sgtc(void) sgtc = 100 * m * latency; sgtc = sgtc / 3; if (sgtc > 0xfffff) { - printk(KERN_WARNING PFX "SGTC too large %d\n", sgtc); + pr_warn(PFX "SGTC too large %d\n", sgtc); sgtc = 0xfffff; } return sgtc; @@ -574,14 +567,10 @@ static unsigned int powernow_get(unsigned int cpu) static int acer_cpufreq_pst(const struct dmi_system_id *d) { - printk(KERN_WARNING PFX - "%s laptop with broken PST tables in BIOS detected.\n", + pr_warn(PFX "%s laptop with broken PST tables in BIOS detected\n", d->ident); - printk(KERN_WARNING PFX - "You need to downgrade to 3A21 (09/09/2002), or try a newer " - "BIOS than 3A71 (01/20/2003)\n"); - printk(KERN_WARNING PFX - "cpufreq scaling has been disabled as a result of this.\n"); + pr_warn(PFX "You need to downgrade to 3A21 (09/09/2002), or try a newer BIOS than 3A71 (01/20/2003)\n"); + pr_warn(PFX "cpufreq scaling has been disabled as a result of this\n"); return 0; } @@ -616,40 +605,38 @@ static int powernow_cpu_init(struct cpufreq_policy *policy) fsb = (10 * cpu_khz) / fid_codes[fidvidstatus.bits.CFID]; if (!fsb) { - printk(KERN_WARNING PFX "can not determine bus frequency\n"); + pr_warn(PFX "can not determine bus frequency\n"); return -EINVAL; } pr_debug("FSB: %3dMHz\n", fsb/1000); if (dmi_check_system(powernow_dmi_table) || acpi_force) { - printk(KERN_INFO PFX "PSB/PST known to be broken. " - "Trying ACPI instead\n"); + pr_info(PFX "PSB/PST known to be broken - trying ACPI instead\n"); result = powernow_acpi_init(); } else { result = powernow_decode_bios(fidvidstatus.bits.MFID, fidvidstatus.bits.SVID); if (result) { - printk(KERN_INFO PFX "Trying ACPI perflib\n"); + pr_info(PFX "Trying ACPI perflib\n"); maximum_speed = 0; minimum_speed = -1; latency = 0; result = powernow_acpi_init(); if (result) { - printk(KERN_INFO PFX - "ACPI and legacy methods failed\n"); + pr_info(PFX "ACPI and legacy methods failed\n"); } } else { /* SGTC use the bus clock as timer */ latency = fixup_sgtc(); - printk(KERN_INFO PFX "SGTC: %d\n", latency); + pr_info(PFX "SGTC: %d\n", latency); } } if (result) return result; - printk(KERN_INFO PFX "Minimum speed %d MHz. Maximum speed %d MHz.\n", - minimum_speed/1000, maximum_speed/1000); + pr_info(PFX "Minimum speed %d MHz - Maximum speed %d MHz\n", + minimum_speed/1000, maximum_speed/1000); policy->cpuinfo.transition_latency = cpufreq_scale(2000000UL, fsb, latency); diff --git a/drivers/cpufreq/pxa2xx-cpufreq.c b/drivers/cpufreq/pxa2xx-cpufreq.c index 46fee1539cc8..8a27667c16fa 100644 --- a/drivers/cpufreq/pxa2xx-cpufreq.c +++ b/drivers/cpufreq/pxa2xx-cpufreq.c @@ -233,9 +233,8 @@ static void pxa27x_guess_max_freq(void) { if (!pxa27x_maxfreq) { pxa27x_maxfreq = 416000; - printk(KERN_INFO "PXA CPU 27x max frequency not defined " - "(pxa27x_maxfreq), assuming pxa271 with %dkHz maxfreq\n", - pxa27x_maxfreq); + pr_info("PXA CPU 27x max frequency not defined (pxa27x_maxfreq), assuming pxa271 with %dkHz maxfreq\n", + pxa27x_maxfreq); } else { pxa27x_maxfreq *= 1000; } @@ -417,7 +416,7 @@ static int pxa_cpufreq_init(struct cpufreq_policy *policy) cpufreq_table_validate_and_show(policy, pxa27x_freq_table); } - printk(KERN_INFO "PXA CPU frequency change support initialized\n"); + pr_info("PXA CPU frequency change support initialized\n"); return 0; } diff --git a/drivers/cpufreq/s3c2412-cpufreq.c b/drivers/cpufreq/s3c2412-cpufreq.c index eb262133fef2..f9447bac9e22 100644 --- a/drivers/cpufreq/s3c2412-cpufreq.c +++ b/drivers/cpufreq/s3c2412-cpufreq.c @@ -197,21 +197,20 @@ static int s3c2412_cpufreq_add(struct device *dev, hclk = clk_get(NULL, "hclk"); if (IS_ERR(hclk)) { - printk(KERN_ERR "%s: cannot find hclk clock\n", __func__); + pr_err("%s: cannot find hclk clock\n", __func__); return -ENOENT; } fclk = clk_get(NULL, "fclk"); if (IS_ERR(fclk)) { - printk(KERN_ERR "%s: cannot find fclk clock\n", __func__); + pr_err("%s: cannot find fclk clock\n", __func__); goto err_fclk; } fclk_rate = clk_get_rate(fclk); if (fclk_rate > 200000000) { - printk(KERN_INFO - "%s: fclk %ld MHz, assuming 266MHz capable part\n", - __func__, fclk_rate / 1000000); + pr_info("%s: fclk %ld MHz, assuming 266MHz capable part\n", + __func__, fclk_rate / 1000000); s3c2412_cpufreq_info.max.fclk = 266000000; s3c2412_cpufreq_info.max.hclk = 133000000; s3c2412_cpufreq_info.max.pclk = 66000000; @@ -219,13 +218,13 @@ static int s3c2412_cpufreq_add(struct device *dev, armclk = clk_get(NULL, "armclk"); if (IS_ERR(armclk)) { - printk(KERN_ERR "%s: cannot find arm clock\n", __func__); + pr_err("%s: cannot find arm clock\n", __func__); goto err_armclk; } xtal = clk_get(NULL, "xtal"); if (IS_ERR(xtal)) { - printk(KERN_ERR "%s: cannot find xtal clock\n", __func__); + pr_err("%s: cannot find xtal clock\n", __func__); goto err_xtal; } diff --git a/drivers/cpufreq/s3c2440-cpufreq.c b/drivers/cpufreq/s3c2440-cpufreq.c index 0129f5c70a61..f6cefe34e411 100644 --- a/drivers/cpufreq/s3c2440-cpufreq.c +++ b/drivers/cpufreq/s3c2440-cpufreq.c @@ -66,7 +66,7 @@ static int s3c2440_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg) __func__, fclk, armclk, hclk_max); if (armclk > fclk) { - printk(KERN_WARNING "%s: armclk > fclk\n", __func__); + pr_warn("%s: armclk > fclk\n", __func__); armclk = fclk; } @@ -273,7 +273,7 @@ static int s3c2440_cpufreq_add(struct device *dev, armclk = s3c_cpufreq_clk_get(NULL, "armclk"); if (IS_ERR(xtal) || IS_ERR(hclk) || IS_ERR(fclk) || IS_ERR(armclk)) { - printk(KERN_ERR "%s: failed to get clocks\n", __func__); + pr_err("%s: failed to get clocks\n", __func__); return -ENOENT; } diff --git a/drivers/cpufreq/s3c24xx-cpufreq-debugfs.c b/drivers/cpufreq/s3c24xx-cpufreq-debugfs.c index 9b7b4289d66c..8182608aeac1 100644 --- a/drivers/cpufreq/s3c24xx-cpufreq-debugfs.c +++ b/drivers/cpufreq/s3c24xx-cpufreq-debugfs.c @@ -178,7 +178,7 @@ static int __init s3c_freq_debugfs_init(void) { dbgfs_root = debugfs_create_dir("s3c-cpufreq", NULL); if (IS_ERR(dbgfs_root)) { - printk(KERN_ERR "%s: error creating debugfs root\n", __func__); + pr_err("%s: error creating debugfs root\n", __func__); return PTR_ERR(dbgfs_root); } diff --git a/drivers/cpufreq/s3c24xx-cpufreq.c b/drivers/cpufreq/s3c24xx-cpufreq.c index 68ef8fd9482f..68f883744500 100644 --- a/drivers/cpufreq/s3c24xx-cpufreq.c +++ b/drivers/cpufreq/s3c24xx-cpufreq.c @@ -175,7 +175,7 @@ static int s3c_cpufreq_settarget(struct cpufreq_policy *policy, cpu_new.freq.fclk = cpu_new.pll.frequency; if (s3c_cpufreq_calcdivs(&cpu_new) < 0) { - printk(KERN_ERR "no divisors for %d\n", target_freq); + pr_err("no divisors for %d\n", target_freq); goto err_notpossible; } @@ -187,7 +187,7 @@ static int s3c_cpufreq_settarget(struct cpufreq_policy *policy, if (cpu_new.freq.hclk != cpu_cur.freq.hclk) { if (s3c_cpufreq_calcio(&cpu_new) < 0) { - printk(KERN_ERR "%s: no IO timings\n", __func__); + pr_err("%s: no IO timings\n", __func__); goto err_notpossible; } } @@ -262,7 +262,7 @@ static int s3c_cpufreq_settarget(struct cpufreq_policy *policy, return 0; err_notpossible: - printk(KERN_ERR "no compatible settings for %d\n", target_freq); + pr_err("no compatible settings for %d\n", target_freq); return -EINVAL; } @@ -331,7 +331,7 @@ static int s3c_cpufreq_target(struct cpufreq_policy *policy, &index); if (ret < 0) { - printk(KERN_ERR "%s: no PLL available\n", __func__); + pr_err("%s: no PLL available\n", __func__); goto err_notpossible; } @@ -346,7 +346,7 @@ static int s3c_cpufreq_target(struct cpufreq_policy *policy, return s3c_cpufreq_settarget(policy, target_freq, pll); err_notpossible: - printk(KERN_ERR "no compatible settings for %d\n", target_freq); + pr_err("no compatible settings for %d\n", target_freq); return -EINVAL; } @@ -356,7 +356,7 @@ struct clk *s3c_cpufreq_clk_get(struct device *dev, const char *name) clk = clk_get(dev, name); if (IS_ERR(clk)) - printk(KERN_ERR "cpufreq: failed to get clock '%s'\n", name); + pr_err("cpufreq: failed to get clock '%s'\n", name); return clk; } @@ -378,15 +378,16 @@ static int __init s3c_cpufreq_initclks(void) if (IS_ERR(clk_fclk) || IS_ERR(clk_hclk) || IS_ERR(clk_pclk) || IS_ERR(_clk_mpll) || IS_ERR(clk_arm) || IS_ERR(_clk_xtal)) { - printk(KERN_ERR "%s: could not get clock(s)\n", __func__); + pr_err("%s: could not get clock(s)\n", __func__); return -ENOENT; } - printk(KERN_INFO "%s: clocks f=%lu,h=%lu,p=%lu,a=%lu\n", __func__, - clk_get_rate(clk_fclk) / 1000, - clk_get_rate(clk_hclk) / 1000, - clk_get_rate(clk_pclk) / 1000, - clk_get_rate(clk_arm) / 1000); + pr_info("%s: clocks f=%lu,h=%lu,p=%lu,a=%lu\n", + __func__, + clk_get_rate(clk_fclk) / 1000, + clk_get_rate(clk_hclk) / 1000, + clk_get_rate(clk_pclk) / 1000, + clk_get_rate(clk_arm) / 1000); return 0; } @@ -424,7 +425,7 @@ static int s3c_cpufreq_resume(struct cpufreq_policy *policy) ret = s3c_cpufreq_settarget(NULL, suspend_freq, &suspend_pll); if (ret) { - printk(KERN_ERR "%s: failed to reset pll/freq\n", __func__); + pr_err("%s: failed to reset pll/freq\n", __func__); return ret; } @@ -449,13 +450,12 @@ static struct cpufreq_driver s3c24xx_driver = { int s3c_cpufreq_register(struct s3c_cpufreq_info *info) { if (!info || !info->name) { - printk(KERN_ERR "%s: failed to pass valid information\n", - __func__); + pr_err("%s: failed to pass valid information\n", __func__); return -EINVAL; } - printk(KERN_INFO "S3C24XX CPU Frequency driver, %s cpu support\n", - info->name); + pr_info("S3C24XX CPU Frequency driver, %s cpu support\n", + info->name); /* check our driver info has valid data */ @@ -478,7 +478,7 @@ int __init s3c_cpufreq_setboard(struct s3c_cpufreq_board *board) struct s3c_cpufreq_board *ours; if (!board) { - printk(KERN_INFO "%s: no board data\n", __func__); + pr_info("%s: no board data\n", __func__); return -EINVAL; } @@ -487,7 +487,7 @@ int __init s3c_cpufreq_setboard(struct s3c_cpufreq_board *board) ours = kzalloc(sizeof(*ours), GFP_KERNEL); if (ours == NULL) { - printk(KERN_ERR "%s: no memory\n", __func__); + pr_err("%s: no memory\n", __func__); return -ENOMEM; } @@ -502,15 +502,15 @@ static int __init s3c_cpufreq_auto_io(void) int ret; if (!cpu_cur.info->get_iotiming) { - printk(KERN_ERR "%s: get_iotiming undefined\n", __func__); + pr_err("%s: get_iotiming undefined\n", __func__); return -ENOENT; } - printk(KERN_INFO "%s: working out IO settings\n", __func__); + pr_info("%s: working out IO settings\n", __func__); ret = (cpu_cur.info->get_iotiming)(&cpu_cur, &s3c24xx_iotiming); if (ret) - printk(KERN_ERR "%s: failed to get timings\n", __func__); + pr_err("%s: failed to get timings\n", __func__); return ret; } @@ -561,7 +561,7 @@ static void s3c_cpufreq_update_loctkime(void) val = calc_locktime(rate, cpu_cur.info->locktime_u) << bits; val |= calc_locktime(rate, cpu_cur.info->locktime_m); - printk(KERN_INFO "%s: new locktime is 0x%08x\n", __func__, val); + pr_info("%s: new locktime is 0x%08x\n", __func__, val); __raw_writel(val, S3C2410_LOCKTIME); } @@ -580,7 +580,7 @@ static int s3c_cpufreq_build_freq(void) ftab = kzalloc(sizeof(*ftab) * size, GFP_KERNEL); if (!ftab) { - printk(KERN_ERR "%s: no memory for tables\n", __func__); + pr_err("%s: no memory for tables\n", __func__); return -ENOMEM; } @@ -608,15 +608,14 @@ static int __init s3c_cpufreq_initcall(void) if (cpu_cur.board->auto_io) { ret = s3c_cpufreq_auto_io(); if (ret) { - printk(KERN_ERR "%s: failed to get io timing\n", + pr_err("%s: failed to get io timing\n", __func__); goto out; } } if (cpu_cur.board->need_io && !cpu_cur.info->set_iotiming) { - printk(KERN_ERR "%s: no IO support registered\n", - __func__); + pr_err("%s: no IO support registered\n", __func__); ret = -EINVAL; goto out; } @@ -666,9 +665,9 @@ int s3c_plltab_register(struct cpufreq_frequency_table *plls, vals += plls_no; vals->frequency = CPUFREQ_TABLE_END; - printk(KERN_INFO "cpufreq: %d PLL entries\n", plls_no); + pr_info("cpufreq: %d PLL entries\n", plls_no); } else - printk(KERN_ERR "cpufreq: no memory for PLL tables\n"); + pr_err("cpufreq: no memory for PLL tables\n"); return vals ? 0 : -ENOMEM; } diff --git a/drivers/cpufreq/s5pv210-cpufreq.c b/drivers/cpufreq/s5pv210-cpufreq.c index a145b319d171..344e584412ed 100644 --- a/drivers/cpufreq/s5pv210-cpufreq.c +++ b/drivers/cpufreq/s5pv210-cpufreq.c @@ -205,7 +205,7 @@ static void s5pv210_set_refresh(enum s5pv210_dmc_port ch, unsigned long freq) } else if (ch == DMC1) { reg = (dmc_base[1] + 0x30); } else { - printk(KERN_ERR "Cannot find DMC port\n"); + pr_err("Cannot find DMC port\n"); return; } @@ -534,7 +534,7 @@ static int s5pv210_cpu_init(struct cpufreq_policy *policy) mem_type = check_mem_type(dmc_base[0]); if ((mem_type != LPDDR) && (mem_type != LPDDR2)) { - printk(KERN_ERR "CPUFreq doesn't support this memory type\n"); + pr_err("CPUFreq doesn't support this memory type\n"); ret = -EINVAL; goto out_dmc1; } diff --git a/drivers/cpufreq/sc520_freq.c b/drivers/cpufreq/sc520_freq.c index ac84e4818014..57bbddf55786 100644 --- a/drivers/cpufreq/sc520_freq.c +++ b/drivers/cpufreq/sc520_freq.c @@ -44,8 +44,8 @@ static unsigned int sc520_freq_get_cpu_frequency(unsigned int cpu) switch (clockspeed_reg & 0x03) { default: - printk(KERN_ERR PFX "error: cpuctl register has unexpected " - "value %02x\n", clockspeed_reg); + pr_err(PFX "error: cpuctl register has unexpected value %02x\n", + clockspeed_reg); case 0x01: return 100000; case 0x02: @@ -112,7 +112,7 @@ static int __init sc520_freq_init(void) cpuctl = ioremap((unsigned long)(MMCR_BASE + OFFS_CPUCTL), 1); if (!cpuctl) { - printk(KERN_ERR "sc520_freq: error: failed to remap memory\n"); + pr_err("sc520_freq: error: failed to remap memory\n"); return -ENOMEM; } diff --git a/drivers/cpufreq/speedstep-centrino.c b/drivers/cpufreq/speedstep-centrino.c index 7d4a31571608..47df2d649b78 100644 --- a/drivers/cpufreq/speedstep-centrino.c +++ b/drivers/cpufreq/speedstep-centrino.c @@ -386,8 +386,7 @@ static int centrino_cpu_init(struct cpufreq_policy *policy) /* check to see if it stuck */ rdmsr(MSR_IA32_MISC_ENABLE, l, h); if (!(l & MSR_IA32_MISC_ENABLE_ENHANCED_SPEEDSTEP)) { - printk(KERN_INFO PFX - "couldn't enable Enhanced SpeedStep\n"); + pr_info(PFX "couldn't enable Enhanced SpeedStep\n"); return -ENODEV; } } diff --git a/drivers/cpufreq/speedstep-ich.c b/drivers/cpufreq/speedstep-ich.c index 37555c6b86a7..9d00c226a6aa 100644 --- a/drivers/cpufreq/speedstep-ich.c +++ b/drivers/cpufreq/speedstep-ich.c @@ -68,13 +68,13 @@ static int speedstep_find_register(void) /* get PMBASE */ pci_read_config_dword(speedstep_chipset_dev, 0x40, &pmbase); if (!(pmbase & 0x01)) { - printk(KERN_ERR "speedstep-ich: could not find speedstep register\n"); + pr_err("speedstep-ich: could not find speedstep register\n"); return -ENODEV; } pmbase &= 0xFFFFFFFE; if (!pmbase) { - printk(KERN_ERR "speedstep-ich: could not find speedstep register\n"); + pr_err("speedstep-ich: could not find speedstep register\n"); return -ENODEV; } @@ -136,7 +136,7 @@ static void speedstep_set_state(unsigned int state) pr_debug("change to %u MHz succeeded\n", speedstep_get_frequency(speedstep_processor) / 1000); else - printk(KERN_ERR "cpufreq: change failed - I/O error\n"); + pr_err("cpufreq: change failed - I/O error\n"); return; } diff --git a/drivers/cpufreq/speedstep-lib.c b/drivers/cpufreq/speedstep-lib.c index 15d3214aaa00..32bdf1df9517 100644 --- a/drivers/cpufreq/speedstep-lib.c +++ b/drivers/cpufreq/speedstep-lib.c @@ -153,7 +153,7 @@ static unsigned int pentium_core_get_frequency(void) fsb = 333333; break; default: - printk(KERN_ERR "PCORE - MSR_FSB_FREQ undefined value"); + pr_err("PCORE - MSR_FSB_FREQ undefined value\n"); } rdmsr(MSR_IA32_EBL_CR_POWERON, msr_lo, msr_tmp); @@ -453,11 +453,8 @@ unsigned int speedstep_get_freqs(enum speedstep_processor processor, */ if (*transition_latency > 10000000 || *transition_latency < 50000) { - printk(KERN_WARNING PFX "frequency transition " - "measured seems out of range (%u " - "nSec), falling back to a safe one of" - "%u nSec.\n", - *transition_latency, 500000); + pr_warn(PFX "frequency transition measured seems out of range (%u nSec), falling back to a safe one of %u nSec\n", + *transition_latency, 500000); *transition_latency = 500000; } } diff --git a/drivers/cpufreq/speedstep-smi.c b/drivers/cpufreq/speedstep-smi.c index 819229e824fb..af32a5f38806 100644 --- a/drivers/cpufreq/speedstep-smi.c +++ b/drivers/cpufreq/speedstep-smi.c @@ -204,9 +204,8 @@ static void speedstep_set_state(unsigned int state) (speedstep_freqs[new_state].frequency / 1000), retry, result); else - printk(KERN_ERR "cpufreq: change to state %u " - "failed with new_state %u and result %u\n", - state, new_state, result); + pr_err("cpufreq: change to state %u failed with new_state %u and result %u\n", + state, new_state, result); return; } -- 2.34.1