From b5660ba76b41af69a0c09d434927bb4b4cadd4b1 Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" Date: Tue, 25 Feb 2014 12:14:06 -0800 Subject: [PATCH] x86, platforms: Remove NUMAQ The NUMAQ support seems to be unmaintained, remove it. Cc: Paul Gortmaker Cc: David Rientjes Acked-by: Paul E. McKenney Signed-off-by: H. Peter Anvin Link: http://lkml.kernel.org/r/n/530CFD6C.7040705@zytor.com --- arch/x86/Kconfig | 36 +-- arch/x86/Kconfig.cpu | 2 +- arch/x86/include/asm/mmzone_32.h | 3 - arch/x86/include/asm/mpspec.h | 6 - arch/x86/include/asm/numaq.h | 171 ---------- arch/x86/kernel/apic/Makefile | 1 - arch/x86/kernel/apic/numaq_32.c | 524 ------------------------------- arch/x86/kernel/cpu/intel.c | 4 - arch/x86/mm/numa.c | 4 - arch/x86/pci/Makefile | 1 - arch/x86/pci/numaq_32.c | 165 ---------- 11 files changed, 9 insertions(+), 908 deletions(-) delete mode 100644 arch/x86/include/asm/numaq.h delete mode 100644 arch/x86/kernel/apic/numaq_32.c delete mode 100644 arch/x86/pci/numaq_32.c diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 3c7f6dbf8498..e1d0c9ac2b56 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -346,7 +346,6 @@ config X86_EXTENDED_PLATFORM for the following (non-PC) 32 bit x86 platforms: Goldfish (Android emulator) AMD Elan - NUMAQ (IBM/Sequent) RDC R-321x SoC SGI 320/540 (Visual Workstation) STA2X11-based (e.g. Northville) @@ -487,32 +486,18 @@ config X86_32_NON_STANDARD depends on X86_32 && SMP depends on X86_EXTENDED_PLATFORM ---help--- - This option compiles in the NUMAQ, bigsmp, and STA2X11 default - subarchitectures. It is intended for a generic binary kernel. If you - select them all, kernel will probe it one by one and will fallback to - default. + This option compiles in the bigsmp and STA2X11 default + subarchitectures. It is intended for a generic binary + kernel. If you select them all, kernel will probe it one by + one and will fallback to default. # Alphabetically sorted list of Non standard 32 bit platforms -config X86_NUMAQ - bool "NUMAQ (IBM/Sequent)" - depends on X86_32_NON_STANDARD - depends on PCI - select NUMA - select X86_MPPARSE - ---help--- - This option is used for getting Linux to run on a NUMAQ (IBM/Sequent) - NUMA multiquad box. This changes the way that processors are - bootstrapped, and uses Clustered Logical APIC addressing mode instead - of Flat Logical. You will need a new lynxer.elf file to flash your - firmware with - send email to . - config X86_SUPPORTS_MEMORY_FAILURE def_bool y # MCE code calls memory_failure(): depends on X86_MCE # On 32-bit this adds too big of NODES_SHIFT and we run out of page flags: - depends on !X86_NUMAQ # On 32-bit SPARSEMEM adds too big of SECTIONS_WIDTH: depends on X86_64 || !SPARSEMEM select ARCH_SUPPORTS_MEMORY_FAILURE @@ -783,7 +768,7 @@ config NR_CPUS range 2 8192 if SMP && !MAXSMP && CPUMASK_OFFSTACK && X86_64 default "1" if !SMP default "8192" if MAXSMP - default "32" if SMP && (X86_NUMAQ || X86_BIGSMP) + default "32" if SMP && X86_BIGSMP default "8" if SMP ---help--- This allows you to specify the maximum number of CPUs which this @@ -1064,13 +1049,11 @@ config X86_CPUID choice prompt "High Memory Support" - default HIGHMEM64G if X86_NUMAQ default HIGHMEM4G depends on X86_32 config NOHIGHMEM bool "off" - depends on !X86_NUMAQ ---help--- Linux can use up to 64 Gigabytes of physical memory on x86 systems. However, the address space of 32-bit x86 processors is only 4 @@ -1107,7 +1090,6 @@ config NOHIGHMEM config HIGHMEM4G bool "4GB" - depends on !X86_NUMAQ ---help--- Select this if you have a 32-bit processor and between 1 and 4 gigabytes of physical RAM. @@ -1199,8 +1181,8 @@ config DIRECT_GBPAGES config NUMA bool "Numa Memory Allocation and Scheduler Support" depends on SMP - depends on X86_64 || (X86_32 && HIGHMEM64G && (X86_NUMAQ || X86_BIGSMP)) - default y if (X86_NUMAQ || X86_BIGSMP) + depends on X86_64 || (X86_32 && HIGHMEM64G && X86_BIGSMP) + default y if X86_BIGSMP ---help--- Enable NUMA (Non Uniform Memory Access) support. @@ -1211,8 +1193,7 @@ config NUMA For 64-bit this is recommended if the system is Intel Core i7 (or later), AMD Opteron, or EM64T NUMA. - For 32-bit this is only needed on (rare) 32-bit-only platforms - that support NUMA topologies, such as NUMAQ, or if you boot a 32-bit + For 32-bit this is only needed if you boot a 32-bit kernel on a 64-bit NUMA platform. Otherwise, you should say N. @@ -1258,7 +1239,6 @@ config NODES_SHIFT range 1 10 default "10" if MAXSMP default "6" if X86_64 - default "4" if X86_NUMAQ default "3" depends on NEED_MULTIPLE_NODES ---help--- diff --git a/arch/x86/Kconfig.cpu b/arch/x86/Kconfig.cpu index c026cca5602c..3c6b17b08a18 100644 --- a/arch/x86/Kconfig.cpu +++ b/arch/x86/Kconfig.cpu @@ -363,7 +363,7 @@ config X86_P6_NOP config X86_TSC def_bool y - depends on ((MWINCHIP3D || MCRUSOE || MEFFICEON || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || MK8 || MVIAC3_2 || MVIAC7 || MGEODEGX1 || MGEODE_LX || MCORE2 || MATOM) && !X86_NUMAQ) || X86_64 + depends on (MWINCHIP3D || MCRUSOE || MEFFICEON || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || MK8 || MVIAC3_2 || MVIAC7 || MGEODEGX1 || MGEODE_LX || MCORE2 || MATOM) || X86_64 config X86_CMPXCHG64 def_bool y diff --git a/arch/x86/include/asm/mmzone_32.h b/arch/x86/include/asm/mmzone_32.h index 8a9b3e288cb4..1ec990bd7dc0 100644 --- a/arch/x86/include/asm/mmzone_32.h +++ b/arch/x86/include/asm/mmzone_32.h @@ -11,9 +11,6 @@ #ifdef CONFIG_NUMA extern struct pglist_data *node_data[]; #define NODE_DATA(nid) (node_data[nid]) - -#include - #endif /* CONFIG_NUMA */ #ifdef CONFIG_DISCONTIGMEM diff --git a/arch/x86/include/asm/mpspec.h b/arch/x86/include/asm/mpspec.h index 3e6b4920ef5d..f5a617956735 100644 --- a/arch/x86/include/asm/mpspec.h +++ b/arch/x86/include/asm/mpspec.h @@ -25,12 +25,6 @@ extern int pic_mode; extern unsigned int def_to_bigsmp; -#ifdef CONFIG_X86_NUMAQ -extern int mp_bus_id_to_node[MAX_MP_BUSSES]; -extern int mp_bus_id_to_local[MAX_MP_BUSSES]; -extern int quad_local_to_mp_bus_id [NR_CPUS/4][4]; -#endif - #else /* CONFIG_X86_64: */ #define MAX_MP_BUSSES 256 diff --git a/arch/x86/include/asm/numaq.h b/arch/x86/include/asm/numaq.h deleted file mode 100644 index c3b3c322fd87..000000000000 --- a/arch/x86/include/asm/numaq.h +++ /dev/null @@ -1,171 +0,0 @@ -/* - * Written by: Patricia Gaughen, IBM Corporation - * - * Copyright (C) 2002, IBM Corp. - * - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for more - * details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - * Send feedback to - */ - -#ifndef _ASM_X86_NUMAQ_H -#define _ASM_X86_NUMAQ_H - -#ifdef CONFIG_X86_NUMAQ - -extern int found_numaq; -extern int numaq_numa_init(void); -extern int pci_numaq_init(void); - -extern void *xquad_portio; - -#define XQUAD_PORTIO_BASE 0xfe400000 -#define XQUAD_PORTIO_QUAD 0x40000 /* 256k per quad. */ -#define XQUAD_PORT_ADDR(port, quad) (xquad_portio + (XQUAD_PORTIO_QUAD*quad) + port) - -/* - * SYS_CFG_DATA_PRIV_ADDR, struct eachquadmem, and struct sys_cfg_data are the - */ -#define SYS_CFG_DATA_PRIV_ADDR 0x0009d000 /* place for scd in private - quad space */ - -/* - * Communication area for each processor on lynxer-processor tests. - * - * NOTE: If you change the size of this eachproc structure you need - * to change the definition for EACH_QUAD_SIZE. - */ -struct eachquadmem { - unsigned int priv_mem_start; /* Starting address of this */ - /* quad's private memory. */ - /* This is always 0. */ - /* In MB. */ - unsigned int priv_mem_size; /* Size of this quad's */ - /* private memory. */ - /* In MB. */ - unsigned int low_shrd_mem_strp_start;/* Starting address of this */ - /* quad's low shared block */ - /* (untranslated). */ - /* In MB. */ - unsigned int low_shrd_mem_start; /* Starting address of this */ - /* quad's low shared memory */ - /* (untranslated). */ - /* In MB. */ - unsigned int low_shrd_mem_size; /* Size of this quad's low */ - /* shared memory. */ - /* In MB. */ - unsigned int lmmio_copb_start; /* Starting address of this */ - /* quad's local memory */ - /* mapped I/O in the */ - /* compatibility OPB. */ - /* In MB. */ - unsigned int lmmio_copb_size; /* Size of this quad's local */ - /* memory mapped I/O in the */ - /* compatibility OPB. */ - /* In MB. */ - unsigned int lmmio_nopb_start; /* Starting address of this */ - /* quad's local memory */ - /* mapped I/O in the */ - /* non-compatibility OPB. */ - /* In MB. */ - unsigned int lmmio_nopb_size; /* Size of this quad's local */ - /* memory mapped I/O in the */ - /* non-compatibility OPB. */ - /* In MB. */ - unsigned int io_apic_0_start; /* Starting address of I/O */ - /* APIC 0. */ - unsigned int io_apic_0_sz; /* Size I/O APIC 0. */ - unsigned int io_apic_1_start; /* Starting address of I/O */ - /* APIC 1. */ - unsigned int io_apic_1_sz; /* Size I/O APIC 1. */ - unsigned int hi_shrd_mem_start; /* Starting address of this */ - /* quad's high shared memory.*/ - /* In MB. */ - unsigned int hi_shrd_mem_size; /* Size of this quad's high */ - /* shared memory. */ - /* In MB. */ - unsigned int mps_table_addr; /* Address of this quad's */ - /* MPS tables from BIOS, */ - /* in system space.*/ - unsigned int lcl_MDC_pio_addr; /* Port-I/O address for */ - /* local access of MDC. */ - unsigned int rmt_MDC_mmpio_addr; /* MM-Port-I/O address for */ - /* remote access of MDC. */ - unsigned int mm_port_io_start; /* Starting address of this */ - /* quad's memory mapped Port */ - /* I/O space. */ - unsigned int mm_port_io_size; /* Size of this quad's memory*/ - /* mapped Port I/O space. */ - unsigned int mm_rmt_io_apic_start; /* Starting address of this */ - /* quad's memory mapped */ - /* remote I/O APIC space. */ - unsigned int mm_rmt_io_apic_size; /* Size of this quad's memory*/ - /* mapped remote I/O APIC */ - /* space. */ - unsigned int mm_isa_start; /* Starting address of this */ - /* quad's memory mapped ISA */ - /* space (contains MDC */ - /* memory space). */ - unsigned int mm_isa_size; /* Size of this quad's memory*/ - /* mapped ISA space (contains*/ - /* MDC memory space). */ - unsigned int rmt_qmi_addr; /* Remote addr to access QMI.*/ - unsigned int lcl_qmi_addr; /* Local addr to access QMI. */ -}; - -/* - * Note: This structure must be NOT be changed unless the multiproc and - * OS are changed to reflect the new structure. - */ -struct sys_cfg_data { - unsigned int quad_id; - unsigned int bsp_proc_id; /* Boot Strap Processor in this quad. */ - unsigned int scd_version; /* Version number of this table. */ - unsigned int first_quad_id; - unsigned int quads_present31_0; /* 1 bit for each quad */ - unsigned int quads_present63_32; /* 1 bit for each quad */ - unsigned int config_flags; - unsigned int boot_flags; - unsigned int csr_start_addr; /* Absolute value (not in MB) */ - unsigned int csr_size; /* Absolute value (not in MB) */ - unsigned int lcl_apic_start_addr; /* Absolute value (not in MB) */ - unsigned int lcl_apic_size; /* Absolute value (not in MB) */ - unsigned int low_shrd_mem_base; /* 0 or 512MB or 1GB */ - unsigned int low_shrd_mem_quad_offset; /* 0,128M,256M,512M,1G */ - /* may not be totally populated */ - unsigned int split_mem_enbl; /* 0 for no low shared memory */ - unsigned int mmio_sz; /* Size of total system memory mapped I/O */ - /* (in MB). */ - unsigned int quad_spin_lock; /* Spare location used for quad */ - /* bringup. */ - unsigned int nonzero55; /* For checksumming. */ - unsigned int nonzeroaa; /* For checksumming. */ - unsigned int scd_magic_number; - unsigned int system_type; - unsigned int checksum; - /* - * memory configuration area for each quad - */ - struct eachquadmem eq[MAX_NUMNODES]; /* indexed by quad id */ -}; - -void numaq_tsc_disable(void); - -#endif /* CONFIG_X86_NUMAQ */ -#endif /* _ASM_X86_NUMAQ_H */ - diff --git a/arch/x86/kernel/apic/Makefile b/arch/x86/kernel/apic/Makefile index 70e141520ad7..dcb5b15401ce 100644 --- a/arch/x86/kernel/apic/Makefile +++ b/arch/x86/kernel/apic/Makefile @@ -18,7 +18,6 @@ obj-y += apic_flat_64.o endif # APIC probe will depend on the listing order here -obj-$(CONFIG_X86_NUMAQ) += numaq_32.o obj-$(CONFIG_X86_BIGSMP) += bigsmp_32.o # For 32bit, probe_32 need to be listed last diff --git a/arch/x86/kernel/apic/numaq_32.c b/arch/x86/kernel/apic/numaq_32.c deleted file mode 100644 index 030ea1c04f72..000000000000 --- a/arch/x86/kernel/apic/numaq_32.c +++ /dev/null @@ -1,524 +0,0 @@ -/* - * Written by: Patricia Gaughen, IBM Corporation - * - * Copyright (C) 2002, IBM Corp. - * Copyright (C) 2009, Red Hat, Inc., Ingo Molnar - * - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for more - * details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - * Send feedback to - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include - -int found_numaq; - -/* - * Have to match translation table entries to main table entries by counter - * hence the mpc_record variable .... can't see a less disgusting way of - * doing this .... - */ -struct mpc_trans { - unsigned char mpc_type; - unsigned char trans_len; - unsigned char trans_type; - unsigned char trans_quad; - unsigned char trans_global; - unsigned char trans_local; - unsigned short trans_reserved; -}; - -static int mpc_record; - -static struct mpc_trans *translation_table[MAX_MPC_ENTRY]; - -int mp_bus_id_to_node[MAX_MP_BUSSES]; -int mp_bus_id_to_local[MAX_MP_BUSSES]; -int quad_local_to_mp_bus_id[NR_CPUS/4][4]; - - -static inline void numaq_register_node(int node, struct sys_cfg_data *scd) -{ - struct eachquadmem *eq = scd->eq + node; - u64 start = (u64)(eq->hi_shrd_mem_start - eq->priv_mem_size) << 20; - u64 end = (u64)(eq->hi_shrd_mem_start + eq->hi_shrd_mem_size) << 20; - int ret; - - node_set(node, numa_nodes_parsed); - ret = numa_add_memblk(node, start, end); - BUG_ON(ret < 0); -} - -/* - * Function: smp_dump_qct() - * - * Description: gets memory layout from the quad config table. This - * function also updates numa_nodes_parsed with the nodes (quads) present. - */ -static void __init smp_dump_qct(void) -{ - struct sys_cfg_data *scd; - int node; - - scd = (void *)__va(SYS_CFG_DATA_PRIV_ADDR); - - for_each_node(node) { - if (scd->quads_present31_0 & (1 << node)) - numaq_register_node(node, scd); - } -} - -void numaq_tsc_disable(void) -{ - if (!found_numaq) - return; - - if (num_online_nodes() > 1) { - printk(KERN_DEBUG "NUMAQ: disabling TSC\n"); - setup_clear_cpu_cap(X86_FEATURE_TSC); - } -} - -static void __init numaq_tsc_init(void) -{ - numaq_tsc_disable(); -} - -static inline int generate_logical_apicid(int quad, int phys_apicid) -{ - return (quad << 4) + (phys_apicid ? phys_apicid << 1 : 1); -} - -/* x86_quirks member */ -static int mpc_apic_id(struct mpc_cpu *m) -{ - int quad = translation_table[mpc_record]->trans_quad; - int logical_apicid = generate_logical_apicid(quad, m->apicid); - - printk(KERN_DEBUG - "Processor #%d %u:%u APIC version %d (quad %d, apic %d)\n", - m->apicid, (m->cpufeature & CPU_FAMILY_MASK) >> 8, - (m->cpufeature & CPU_MODEL_MASK) >> 4, - m->apicver, quad, logical_apicid); - - return logical_apicid; -} - -/* x86_quirks member */ -static void mpc_oem_bus_info(struct mpc_bus *m, char *name) -{ - int quad = translation_table[mpc_record]->trans_quad; - int local = translation_table[mpc_record]->trans_local; - - mp_bus_id_to_node[m->busid] = quad; - mp_bus_id_to_local[m->busid] = local; - - printk(KERN_INFO "Bus #%d is %s (node %d)\n", m->busid, name, quad); -} - -/* x86_quirks member */ -static void mpc_oem_pci_bus(struct mpc_bus *m) -{ - int quad = translation_table[mpc_record]->trans_quad; - int local = translation_table[mpc_record]->trans_local; - - quad_local_to_mp_bus_id[quad][local] = m->busid; -} - -/* - * Called from mpparse code. - * mode = 0: prescan - * mode = 1: one mpc entry scanned - */ -static void numaq_mpc_record(unsigned int mode) -{ - if (!mode) - mpc_record = 0; - else - mpc_record++; -} - -static void __init MP_translation_info(struct mpc_trans *m) -{ - printk(KERN_INFO - "Translation: record %d, type %d, quad %d, global %d, local %d\n", - mpc_record, m->trans_type, m->trans_quad, m->trans_global, - m->trans_local); - - if (mpc_record >= MAX_MPC_ENTRY) - printk(KERN_ERR "MAX_MPC_ENTRY exceeded!\n"); - else - translation_table[mpc_record] = m; /* stash this for later */ - - if (m->trans_quad < MAX_NUMNODES && !node_online(m->trans_quad)) - node_set_online(m->trans_quad); -} - -static int __init mpf_checksum(unsigned char *mp, int len) -{ - int sum = 0; - - while (len--) - sum += *mp++; - - return sum & 0xFF; -} - -/* - * Read/parse the MPC oem tables - */ -static void __init smp_read_mpc_oem(struct mpc_table *mpc) -{ - struct mpc_oemtable *oemtable = (void *)(long)mpc->oemptr; - int count = sizeof(*oemtable); /* the header size */ - unsigned char *oemptr = ((unsigned char *)oemtable) + count; - - mpc_record = 0; - printk(KERN_INFO - "Found an OEM MPC table at %8p - parsing it...\n", oemtable); - - if (memcmp(oemtable->signature, MPC_OEM_SIGNATURE, 4)) { - printk(KERN_WARNING - "SMP mpc oemtable: bad signature [%c%c%c%c]!\n", - oemtable->signature[0], oemtable->signature[1], - oemtable->signature[2], oemtable->signature[3]); - return; - } - - if (mpf_checksum((unsigned char *)oemtable, oemtable->length)) { - printk(KERN_WARNING "SMP oem mptable: checksum error!\n"); - return; - } - - while (count < oemtable->length) { - switch (*oemptr) { - case MP_TRANSLATION: - { - struct mpc_trans *m = (void *)oemptr; - - MP_translation_info(m); - oemptr += sizeof(*m); - count += sizeof(*m); - ++mpc_record; - break; - } - default: - printk(KERN_WARNING - "Unrecognised OEM table entry type! - %d\n", - (int)*oemptr); - return; - } - } -} - -static __init void early_check_numaq(void) -{ - /* - * get boot-time SMP configuration: - */ - if (smp_found_config) - early_get_smp_config(); - - if (found_numaq) { - x86_init.mpparse.mpc_record = numaq_mpc_record; - x86_init.mpparse.setup_ioapic_ids = x86_init_noop; - x86_init.mpparse.mpc_apic_id = mpc_apic_id; - x86_init.mpparse.smp_read_mpc_oem = smp_read_mpc_oem; - x86_init.mpparse.mpc_oem_pci_bus = mpc_oem_pci_bus; - x86_init.mpparse.mpc_oem_bus_info = mpc_oem_bus_info; - x86_init.timers.tsc_pre_init = numaq_tsc_init; - x86_init.pci.init = pci_numaq_init; - } -} - -int __init numaq_numa_init(void) -{ - early_check_numaq(); - if (!found_numaq) - return -ENOENT; - smp_dump_qct(); - - return 0; -} - -#define NUMAQ_APIC_DFR_VALUE (APIC_DFR_CLUSTER) - -static inline unsigned int numaq_get_apic_id(unsigned long x) -{ - return (x >> 24) & 0x0F; -} - -static inline void numaq_send_IPI_mask(const struct cpumask *mask, int vector) -{ - default_send_IPI_mask_sequence_logical(mask, vector); -} - -static inline void numaq_send_IPI_allbutself(int vector) -{ - default_send_IPI_mask_allbutself_logical(cpu_online_mask, vector); -} - -static inline void numaq_send_IPI_all(int vector) -{ - numaq_send_IPI_mask(cpu_online_mask, vector); -} - -#define NUMAQ_TRAMPOLINE_PHYS_LOW (0x8) -#define NUMAQ_TRAMPOLINE_PHYS_HIGH (0xa) - -/* - * Because we use NMIs rather than the INIT-STARTUP sequence to - * bootstrap the CPUs, the APIC may be in a weird state. Kick it: - */ -static inline void numaq_smp_callin_clear_local_apic(void) -{ - clear_local_APIC(); -} - -static inline const struct cpumask *numaq_target_cpus(void) -{ - return cpu_all_mask; -} - -static unsigned long numaq_check_apicid_used(physid_mask_t *map, int apicid) -{ - return physid_isset(apicid, *map); -} - -static inline unsigned long numaq_check_apicid_present(int bit) -{ - return physid_isset(bit, phys_cpu_present_map); -} - -static inline int numaq_apic_id_registered(void) -{ - return 1; -} - -static inline void numaq_init_apic_ldr(void) -{ - /* Already done in NUMA-Q firmware */ -} - -static inline void numaq_setup_apic_routing(void) -{ - printk(KERN_INFO - "Enabling APIC mode: NUMA-Q. Using %d I/O APICs\n", - nr_ioapics); -} - -/* - * Skip adding the timer int on secondary nodes, which causes - * a small but painful rift in the time-space continuum. - */ -static inline int numaq_multi_timer_check(int apic, int irq) -{ - return apic != 0 && irq == 0; -} - -static inline void numaq_ioapic_phys_id_map(physid_mask_t *phys_map, physid_mask_t *retmap) -{ - /* We don't have a good way to do this yet - hack */ - return physids_promote(0xFUL, retmap); -} - -/* - * Supporting over 60 cpus on NUMA-Q requires a locality-dependent - * cpu to APIC ID relation to properly interact with the intelligent - * mode of the cluster controller. - */ -static inline int numaq_cpu_present_to_apicid(int mps_cpu) -{ - if (mps_cpu < 60) - return ((mps_cpu >> 2) << 4) | (1 << (mps_cpu & 0x3)); - else - return BAD_APICID; -} - -static inline int numaq_apicid_to_node(int logical_apicid) -{ - return logical_apicid >> 4; -} - -static int numaq_numa_cpu_node(int cpu) -{ - int logical_apicid = early_per_cpu(x86_cpu_to_logical_apicid, cpu); - - if (logical_apicid != BAD_APICID) - return numaq_apicid_to_node(logical_apicid); - return NUMA_NO_NODE; -} - -static void numaq_apicid_to_cpu_present(int logical_apicid, physid_mask_t *retmap) -{ - int node = numaq_apicid_to_node(logical_apicid); - int cpu = __ffs(logical_apicid & 0xf); - - physid_set_mask_of_physid(cpu + 4*node, retmap); -} - -/* Where the IO area was mapped on multiquad, always 0 otherwise */ -void *xquad_portio; - -static inline int numaq_check_phys_apicid_present(int phys_apicid) -{ - return 1; -} - -/* - * We use physical apicids here, not logical, so just return the default - * physical broadcast to stop people from breaking us - */ -static int -numaq_cpu_mask_to_apicid_and(const struct cpumask *cpumask, - const struct cpumask *andmask, - unsigned int *apicid) -{ - *apicid = 0x0F; - return 0; -} - -/* No NUMA-Q box has a HT CPU, but it can't hurt to use the default code. */ -static inline int numaq_phys_pkg_id(int cpuid_apic, int index_msb) -{ - return cpuid_apic >> index_msb; -} - -static int -numaq_mps_oem_check(struct mpc_table *mpc, char *oem, char *productid) -{ - if (strncmp(oem, "IBM NUMA", 8)) - printk(KERN_ERR "Warning! Not a NUMA-Q system!\n"); - else - found_numaq = 1; - - return found_numaq; -} - -static int probe_numaq(void) -{ - /* already know from get_memcfg_numaq() */ - return found_numaq; -} - -static void numaq_setup_portio_remap(void) -{ - int num_quads = num_online_nodes(); - - if (num_quads <= 1) - return; - - printk(KERN_INFO - "Remapping cross-quad port I/O for %d quads\n", num_quads); - - xquad_portio = ioremap(XQUAD_PORTIO_BASE, num_quads*XQUAD_PORTIO_QUAD); - - printk(KERN_INFO - "xquad_portio vaddr 0x%08lx, len %08lx\n", - (u_long) xquad_portio, (u_long) num_quads*XQUAD_PORTIO_QUAD); -} - -/* Use __refdata to keep false positive warning calm. */ -static struct apic __refdata apic_numaq = { - - .name = "NUMAQ", - .probe = probe_numaq, - .acpi_madt_oem_check = NULL, - .apic_id_valid = default_apic_id_valid, - .apic_id_registered = numaq_apic_id_registered, - - .irq_delivery_mode = dest_LowestPrio, - /* physical delivery on LOCAL quad: */ - .irq_dest_mode = 0, - - .target_cpus = numaq_target_cpus, - .disable_esr = 1, - .dest_logical = APIC_DEST_LOGICAL, - .check_apicid_used = numaq_check_apicid_used, - .check_apicid_present = numaq_check_apicid_present, - - .vector_allocation_domain = flat_vector_allocation_domain, - .init_apic_ldr = numaq_init_apic_ldr, - - .ioapic_phys_id_map = numaq_ioapic_phys_id_map, - .setup_apic_routing = numaq_setup_apic_routing, - .multi_timer_check = numaq_multi_timer_check, - .cpu_present_to_apicid = numaq_cpu_present_to_apicid, - .apicid_to_cpu_present = numaq_apicid_to_cpu_present, - .setup_portio_remap = numaq_setup_portio_remap, - .check_phys_apicid_present = numaq_check_phys_apicid_present, - .enable_apic_mode = NULL, - .phys_pkg_id = numaq_phys_pkg_id, - .mps_oem_check = numaq_mps_oem_check, - - .get_apic_id = numaq_get_apic_id, - .set_apic_id = NULL, - .apic_id_mask = 0x0F << 24, - - .cpu_mask_to_apicid_and = numaq_cpu_mask_to_apicid_and, - - .send_IPI_mask = numaq_send_IPI_mask, - .send_IPI_mask_allbutself = NULL, - .send_IPI_allbutself = numaq_send_IPI_allbutself, - .send_IPI_all = numaq_send_IPI_all, - .send_IPI_self = default_send_IPI_self, - - .wakeup_secondary_cpu = wakeup_secondary_cpu_via_nmi, - .trampoline_phys_low = NUMAQ_TRAMPOLINE_PHYS_LOW, - .trampoline_phys_high = NUMAQ_TRAMPOLINE_PHYS_HIGH, - - /* We don't do anything here because we use NMI's to boot instead */ - .wait_for_init_deassert = false, - .smp_callin_clear_local_apic = numaq_smp_callin_clear_local_apic, - .inquire_remote_apic = NULL, - - .read = native_apic_mem_read, - .write = native_apic_mem_write, - .eoi_write = native_apic_mem_write, - .icr_read = native_apic_icr_read, - .icr_write = native_apic_icr_write, - .wait_icr_idle = native_apic_wait_icr_idle, - .safe_wait_icr_idle = native_safe_apic_wait_icr_idle, - - .x86_32_early_logical_apicid = noop_x86_32_early_logical_apicid, - .x86_32_numa_cpu_node = numaq_numa_cpu_node, -}; - -apic_driver(apic_numaq); diff --git a/arch/x86/kernel/cpu/intel.c b/arch/x86/kernel/cpu/intel.c index 5cd9bfabd645..ea56e7c9abe6 100644 --- a/arch/x86/kernel/cpu/intel.c +++ b/arch/x86/kernel/cpu/intel.c @@ -267,10 +267,6 @@ static void intel_workarounds(struct cpuinfo_x86 *c) } #endif -#ifdef CONFIG_X86_NUMAQ - numaq_tsc_disable(); -#endif - intel_smp_check(c); } #else diff --git a/arch/x86/mm/numa.c b/arch/x86/mm/numa.c index 27aa0455fab3..1d045f9c390f 100644 --- a/arch/x86/mm/numa.c +++ b/arch/x86/mm/numa.c @@ -687,10 +687,6 @@ static int __init dummy_numa_init(void) void __init x86_numa_init(void) { if (!numa_off) { -#ifdef CONFIG_X86_NUMAQ - if (!numa_init(numaq_numa_init)) - return; -#endif #ifdef CONFIG_ACPI_NUMA if (!numa_init(x86_acpi_numa_init)) return; diff --git a/arch/x86/pci/Makefile b/arch/x86/pci/Makefile index 758b8272c821..5c6fc3577a49 100644 --- a/arch/x86/pci/Makefile +++ b/arch/x86/pci/Makefile @@ -13,7 +13,6 @@ obj-y += legacy.o irq.o obj-$(CONFIG_STA2X11) += sta2x11-fixup.o -obj-$(CONFIG_X86_NUMAQ) += numaq_32.o obj-$(CONFIG_X86_NUMACHIP) += numachip.o obj-$(CONFIG_X86_INTEL_MID) += intel_mid_pci.o diff --git a/arch/x86/pci/numaq_32.c b/arch/x86/pci/numaq_32.c deleted file mode 100644 index 72c229f9ebcf..000000000000 --- a/arch/x86/pci/numaq_32.c +++ /dev/null @@ -1,165 +0,0 @@ -/* - * numaq_32.c - Low-level PCI access for NUMA-Q machines - */ - -#include -#include -#include -#include -#include -#include -#include - -#define BUS2QUAD(global) (mp_bus_id_to_node[global]) - -#define BUS2LOCAL(global) (mp_bus_id_to_local[global]) - -#define QUADLOCAL2BUS(quad,local) (quad_local_to_mp_bus_id[quad][local]) - -#define PCI_CONF1_MQ_ADDRESS(bus, devfn, reg) \ - (0x80000000 | (BUS2LOCAL(bus) << 16) | (devfn << 8) | (reg & ~3)) - -static void write_cf8(unsigned bus, unsigned devfn, unsigned reg) -{ - unsigned val = PCI_CONF1_MQ_ADDRESS(bus, devfn, reg); - if (xquad_portio) - writel(val, XQUAD_PORT_ADDR(0xcf8, BUS2QUAD(bus))); - else - outl(val, 0xCF8); -} - -static int pci_conf1_mq_read(unsigned int seg, unsigned int bus, - unsigned int devfn, int reg, int len, u32 *value) -{ - unsigned long flags; - void *adr __iomem = XQUAD_PORT_ADDR(0xcfc, BUS2QUAD(bus)); - - WARN_ON(seg); - if (!value || (bus >= MAX_MP_BUSSES) || (devfn > 255) || (reg > 255)) - return -EINVAL; - - raw_spin_lock_irqsave(&pci_config_lock, flags); - - write_cf8(bus, devfn, reg); - - switch (len) { - case 1: - if (xquad_portio) - *value = readb(adr + (reg & 3)); - else - *value = inb(0xCFC + (reg & 3)); - break; - case 2: - if (xquad_portio) - *value = readw(adr + (reg & 2)); - else - *value = inw(0xCFC + (reg & 2)); - break; - case 4: - if (xquad_portio) - *value = readl(adr); - else - *value = inl(0xCFC); - break; - } - - raw_spin_unlock_irqrestore(&pci_config_lock, flags); - - return 0; -} - -static int pci_conf1_mq_write(unsigned int seg, unsigned int bus, - unsigned int devfn, int reg, int len, u32 value) -{ - unsigned long flags; - void *adr __iomem = XQUAD_PORT_ADDR(0xcfc, BUS2QUAD(bus)); - - WARN_ON(seg); - if ((bus >= MAX_MP_BUSSES) || (devfn > 255) || (reg > 255)) - return -EINVAL; - - raw_spin_lock_irqsave(&pci_config_lock, flags); - - write_cf8(bus, devfn, reg); - - switch (len) { - case 1: - if (xquad_portio) - writeb(value, adr + (reg & 3)); - else - outb((u8)value, 0xCFC + (reg & 3)); - break; - case 2: - if (xquad_portio) - writew(value, adr + (reg & 2)); - else - outw((u16)value, 0xCFC + (reg & 2)); - break; - case 4: - if (xquad_portio) - writel(value, adr + reg); - else - outl((u32)value, 0xCFC); - break; - } - - raw_spin_unlock_irqrestore(&pci_config_lock, flags); - - return 0; -} - -#undef PCI_CONF1_MQ_ADDRESS - -static const struct pci_raw_ops pci_direct_conf1_mq = { - .read = pci_conf1_mq_read, - .write = pci_conf1_mq_write -}; - - -static void pci_fixup_i450nx(struct pci_dev *d) -{ - /* - * i450NX -- Find and scan all secondary buses on all PXB's. - */ - int pxb, reg; - u8 busno, suba, subb; - int quad = BUS2QUAD(d->bus->number); - - dev_info(&d->dev, "searching for i450NX host bridges\n"); - reg = 0xd0; - for(pxb=0; pxb<2; pxb++) { - pci_read_config_byte(d, reg++, &busno); - pci_read_config_byte(d, reg++, &suba); - pci_read_config_byte(d, reg++, &subb); - dev_dbg(&d->dev, "i450NX PXB %d: %02x/%02x/%02x\n", - pxb, busno, suba, subb); - if (busno) { - /* Bus A */ - pci_scan_bus_with_sysdata(QUADLOCAL2BUS(quad, busno)); - } - if (suba < subb) { - /* Bus B */ - pci_scan_bus_with_sysdata(QUADLOCAL2BUS(quad, suba+1)); - } - } - pcibios_last_bus = -1; -} -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82451NX, pci_fixup_i450nx); - -int __init pci_numaq_init(void) -{ - int quad; - - raw_pci_ops = &pci_direct_conf1_mq; - - pcibios_scan_root(0); - if (num_online_nodes() > 1) - for_each_online_node(quad) { - if (quad == 0) - continue; - printk("Scanning PCI bus %d for quad %d\n", - QUADLOCAL2BUS(quad,0), quad); - pci_scan_bus_with_sysdata(QUADLOCAL2BUS(quad, 0)); - } - return 0; -} -- 2.34.1