From bbffe435248444065bd76141c41bbe65db950cc9 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Fri, 6 Jul 2012 12:08:18 -0600 Subject: [PATCH] PCI: leave MEM and IO decoding disabled during 64-bit BAR sizing, too After 253d2e5498, we disable MEM and IO decoding for most devices while we size 32-bit BARs. However, we restore the original COMMAND register before we size the upper 32 bits of 64-bit BARs, so we can still cause a conflict. This patch waits to restore the original COMMAND register until we're completely finished sizing the BAR. Reference: https://lkml.org/lkml/2007/8/25/154 Acked-by: Jacob Pan Signed-off-by: Bjorn Helgaas --- drivers/pci/probe.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index 658ac977cb56..66b3a6ffe5a0 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -152,9 +152,6 @@ int __pci_read_base(struct pci_dev *dev, enum pci_bar_type type, pci_read_config_dword(dev, pos, &sz); pci_write_config_dword(dev, pos, l); - if (!dev->mmio_always_on) - pci_write_config_word(dev, PCI_COMMAND, orig_cmd); - /* * All bits set in sz means the device isn't working properly. * If the BAR isn't implemented, all bits must be 0. If it's a @@ -239,6 +236,9 @@ int __pci_read_base(struct pci_dev *dev, enum pci_bar_type type, } out: + if (!dev->mmio_always_on) + pci_write_config_word(dev, PCI_COMMAND, orig_cmd); + return (res->flags & IORESOURCE_MEM_64) ? 1 : 0; fail: res->flags = 0; -- 2.34.1