From bc521818e28042bb6018d91c353d24fb01ccb162 Mon Sep 17 00:00:00 2001 From: Ulf Hansson Date: Tue, 13 Dec 2011 16:57:55 +0100 Subject: [PATCH] ARM: 7219/1: mmc: mmci: Change vdd_handler to a generic ios_handler The purpose of the vdd_handler does not make sense. We remove it and use a generic approach instead. A new ios_handler is added, the purpose of which e.g. can be to control GPIO pins to a levelshifter. Previously the vdd_handler was also used for making additional changes to the power register bits. This option is superfluous and is therefore removed. Adaptaptions from the old vdd_handler to the new ios_handler is done for mach-ux500 board, which was the only one using the vdd_handler. This patch is based upon a patch from Sebastian Rasmussen. Tested-by: Linus Walleij Signed-off-by: Sebastian Rasmussen Signed-off-by: Ulf Hansson Signed-off-by: Russell King --- arch/arm/mach-ux500/board-mop500-sdi.c | 21 ++++++++------------- drivers/mmc/host/mmci.c | 8 ++++---- include/linux/amba/mmci.h | 6 +++--- 3 files changed, 15 insertions(+), 20 deletions(-) diff --git a/arch/arm/mach-ux500/board-mop500-sdi.c b/arch/arm/mach-ux500/board-mop500-sdi.c index 23be34b3bb6e..4049bd7f061f 100644 --- a/arch/arm/mach-ux500/board-mop500-sdi.c +++ b/arch/arm/mach-ux500/board-mop500-sdi.c @@ -31,21 +31,13 @@ * SDI 0 (MicroSD slot) */ -/* MMCIPOWER bits */ -#define MCI_DATA2DIREN (1 << 2) -#define MCI_CMDDIREN (1 << 3) -#define MCI_DATA0DIREN (1 << 4) -#define MCI_DATA31DIREN (1 << 5) -#define MCI_FBCLKEN (1 << 7) - /* GPIO pins used by the sdi0 level shifter */ static int sdi0_en = -1; static int sdi0_vsel = -1; -static u32 mop500_sdi0_vdd_handler(struct device *dev, unsigned int vdd, - unsigned char power_mode) +static int mop500_sdi0_ios_handler(struct device *dev, struct mmc_ios *ios) { - switch (power_mode) { + switch (ios->power_mode) { case MMC_POWER_UP: case MMC_POWER_ON: /* @@ -65,8 +57,7 @@ static u32 mop500_sdi0_vdd_handler(struct device *dev, unsigned int vdd, break; } - return MCI_FBCLKEN | MCI_CMDDIREN | MCI_DATA0DIREN | - MCI_DATA2DIREN | MCI_DATA31DIREN; + return 0; } #ifdef CONFIG_STE_DMA40 @@ -90,13 +81,17 @@ static struct stedma40_chan_cfg mop500_sdi0_dma_cfg_tx = { #endif static struct mmci_platform_data mop500_sdi0_data = { - .vdd_handler = mop500_sdi0_vdd_handler, + .ios_handler = mop500_sdi0_ios_handler, .ocr_mask = MMC_VDD_29_30, .f_max = 50000000, .capabilities = MMC_CAP_4_BIT_DATA | MMC_CAP_SD_HIGHSPEED | MMC_CAP_MMC_HIGHSPEED, .gpio_wp = -1, + .sigdir = MCI_ST_FBCLKEN | + MCI_ST_CMDDIREN | + MCI_ST_DATA0DIREN | + MCI_ST_DATA2DIREN, #ifdef CONFIG_STE_DMA40 .dma_filter = stedma40_filter, .dma_rx_param = &mop500_sdi0_dma_cfg_rx, diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c index eb11ce61941d..0af1507d15c0 100644 --- a/drivers/mmc/host/mmci.c +++ b/drivers/mmc/host/mmci.c @@ -1026,6 +1026,10 @@ static void mmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) unsigned long flags; int ret; + if (host->plat->ios_handler && + host->plat->ios_handler(mmc_dev(mmc), ios)) + dev_err(mmc_dev(mmc), "platform ios_handler failed\n"); + switch (ios->power_mode) { case MMC_POWER_OFF: if (host->vcc) @@ -1045,10 +1049,6 @@ static void mmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) return; } } - if (host->plat->vdd_handler) - pwr |= host->plat->vdd_handler(mmc_dev(mmc), ios->vdd, - ios->power_mode); - /* * The ST Micro variant doesn't have the PL180s MCI_PWR_UP * and instead uses MCI_PWR_ON so apply whatever value is diff --git a/include/linux/amba/mmci.h b/include/linux/amba/mmci.h index b51bf5fa85f8..32a89cf5ec45 100644 --- a/include/linux/amba/mmci.h +++ b/include/linux/amba/mmci.h @@ -31,7 +31,8 @@ struct dma_chan; * @ocr_mask: available voltages on the 4 pins from the block, this * is ignored if a regulator is used, see the MMC_VDD_* masks in * mmc/host.h - * @vdd_handler: a callback function to translate a MMC_VDD_* + * @ios_handler: a callback function to act on specfic ios changes, + * used for example to control a levelshifter * mask into a value to be binary (or set some other custom bits * in MMCIPWR) or:ed and written into the MMCIPWR register of the * block. May also control external power based on the power_mode. @@ -61,8 +62,7 @@ struct dma_chan; struct mmci_platform_data { unsigned int f_max; unsigned int ocr_mask; - u32 (*vdd_handler)(struct device *, unsigned int vdd, - unsigned char power_mode); + int (*ios_handler)(struct device *, struct mmc_ios *); unsigned int (*status)(struct device *); int gpio_wp; int gpio_cd; -- 2.34.1