From c509fdd94ad60f780a022feb53bffb27a72d4f70 Mon Sep 17 00:00:00 2001 From: Jade Bilkey Date: Fri, 7 Mar 2014 19:44:22 -0500 Subject: [PATCH] staging: silicom: fix trailing whitespace in libbp_sd.h Fixes checkpatch.pl trailing whitespace errors. Signed-off-by: Jade Bilkey Reviewed-by: Sarah Sharp Signed-off-by: Greg Kroah-Hartman --- drivers/staging/silicom/bypasslib/libbp_sd.h | 244 +++++++++---------- 1 file changed, 122 insertions(+), 122 deletions(-) diff --git a/drivers/staging/silicom/bypasslib/libbp_sd.h b/drivers/staging/silicom/bypasslib/libbp_sd.h index 3b4f8364ed18..405ca67f289c 100644 --- a/drivers/staging/silicom/bypasslib/libbp_sd.h +++ b/drivers/staging/silicom/bypasslib/libbp_sd.h @@ -18,7 +18,7 @@ * @if_index: network device index * * Output: - * 1 - if device is bypass controlling device, + * 1 - if device is bypass controlling device, * 0 - if device is bypass slave device * -1 - device not support Bypass **/ @@ -30,7 +30,7 @@ int is_bypass_sd(int if_index); * * Output: * network device index of the slave device - * -1 - on failure (device not support Bypass or it's a slave device) + * -1 - on failure (device not support Bypass or it's a slave device) **/ int get_bypass_slave_sd(int if_index); @@ -39,55 +39,55 @@ int get_bypass_slave_sd(int if_index); * @if_index: network device index * * Output: - * flags word on success;flag word is a 32-bit mask word with each bit defines different + * flags word on success;flag word is a 32-bit mask word with each bit defines different * capability as described bellow. * Value of 1 for supporting this feature. 0 for not supporting this feature. * -1 - on failure (if the device is not capable of the operation or not a Bypass device) * Bit feature description - * + * * 0 BP_CAP The interface is Bypass capable in general - * + * * 1 BP_STATUS_CAP The interface can report of the current Bypass mode - * - * 2 BP_STATUS_CHANGE_CAP The interface can report on a change to bypass mode from + * + * 2 BP_STATUS_CHANGE_CAP The interface can report on a change to bypass mode from * the last time the mode was defined - * + * * 3 SW_CTL_CAP The interface is Software controlled capable for bypass/non bypass modes. - * - * 4 BP_DIS_CAP The interface is capable of disabling the Bypass mode at all times. - * This mode will retain its mode even during power loss and also after - * power recovery. This will overcome on any bypass operation due to + * + * 4 BP_DIS_CAP The interface is capable of disabling the Bypass mode at all times. + * This mode will retain its mode even during power loss and also after + * power recovery. This will overcome on any bypass operation due to * watchdog timeout or set bypass command. - * + * * 5 BP_DIS_STATUS_CAP The interface can report of the current DIS_BP_CAP - * - * 6 STD_NIC_CAP The interface is capable to be configured to operate as standard, non Bypass, + * + * 6 STD_NIC_CAP The interface is capable to be configured to operate as standard, non Bypass, * NIC interface (have direct connection to interfaces at all power modes) - * + * * 7 BP_PWOFF_NO_CAP The interface can be in Bypass mode at power off state - * - * 8 BP_PWOFF_OFF_CAP The interface can disconnect the Bypass mode at power off state without + * + * 8 BP_PWOFF_OFF_CAP The interface can disconnect the Bypass mode at power off state without * effecting all the other states of operation - * - * 9 BP_PWOFF_CTL_CAP The behavior of the Bypass mode at Power-off state can be controlled by + * + * 9 BP_PWOFF_CTL_CAP The behavior of the Bypass mode at Power-off state can be controlled by * software without effecting any other state - * - *10 BP_PWUP_ON_CAP The interface can be in Bypass mode when power is turned on + * + *10 BP_PWUP_ON_CAP The interface can be in Bypass mode when power is turned on * (until the system take control of the bypass functionality) - * - *11 BP_PWUP_OFF_CAP The interface can disconnect from Bypass mode when power is turned on + * + *11 BP_PWUP_OFF_CAP The interface can disconnect from Bypass mode when power is turned on * (until the system take control of the bypass functionality) - * + * *12 BP_PWUP_CTL_CAP The behavior of the Bypass mode at Power-up can be controlled by software - * - *13 WD_CTL_CAP The interface has watchdog capabilities to turn to Bypass mode when not reset + * + *13 WD_CTL_CAP The interface has watchdog capabilities to turn to Bypass mode when not reset * for defined period of time. - * + * *14 WD_STATUS_CAP The interface can report on the watchdog status (Active/inactive) - * + * *15 WD_TIMEOUT_CAP The interface can report the time left till watchdog triggers to Bypass mode. - * - *16-31 RESERVED + * + *16-31 RESERVED * * **/ int get_bypass_caps_sd(int if_index); @@ -97,34 +97,34 @@ int get_bypass_caps_sd(int if_index); * @if_index: network device index * * Output: - * - * Set of numbers defining the various parameters of the watchdog capable + * + * Set of numbers defining the various parameters of the watchdog capable * to be set to as described bellow. * -1 - on failure (device not support Bypass or it's a slave device) - * + * * Bit feature description - * + * * 0-3 WD_MIN_TIME The interface WD minimal time period in 100mS units - * - * 4 WD_STEP_TIME The steps of the WD timer in + * + * 4 WD_STEP_TIME The steps of the WD timer in * 0 - for linear steps (WD_MIN_TIME * X) * 1 - for multiply by 2 from previous step (WD_MIN_TIME * 2^X) - * - * 5-8 WD_STEP_COUNT Number of steps the WD timer supports in 2^X + * + * 5-8 WD_STEP_COUNT Number of steps the WD timer supports in 2^X * (X bit available for defining the value) - * - * - * + * + * + * **/ int get_wd_set_caps_sd(int if_index); /** * set_bypass - set Bypass state * @if_index: network device index of the controlling device - * @bypass_mode: bypass mode (1=on, 0=off) + * @bypass_mode: bypass mode (1=on, 0=off) * Output: * 0 - on success - * -1 - on failure (device not support Bypass or it's a slave device) + * -1 - on failure (device not support Bypass or it's a slave device) **/ int set_bypass_sd(int if_index, int bypass_mode); @@ -133,7 +133,7 @@ int set_bypass_sd(int if_index, int bypass_mode); * @if_index: network device index of the controlling device * Output: * 0/1 - (off/on) on success - * -1 - on failure (device not support Bypass or it's a slave device) + * -1 - on failure (device not support Bypass or it's a slave device) **/ int get_bypass_sd(int if_index); @@ -142,7 +142,7 @@ int get_bypass_sd(int if_index); * @if_index: network device index of the controlling device * Output: * 0/1 - (off/on) on success - * -1 - on failure (device not support Bypass or it's a slave device) + * -1 - on failure (device not support Bypass or it's a slave device) **/ int get_bypass_change_sd(int if_index); @@ -152,8 +152,8 @@ int get_bypass_change_sd(int if_index); * @dis_bypass: disable bypass(1=dis, 0=en) * Output: * 0 - on success - * -1 - on failure (device is not capable of the operation ordevice not support Bypass - * or it's a slave device) + * -1 - on failure (device is not capable of the operation ordevice not support Bypass + * or it's a slave device) **/ int set_dis_bypass_sd(int if_index, int dis_bypass); @@ -162,8 +162,8 @@ int set_dis_bypass_sd(int if_index, int dis_bypass); * @if_index: network device index of the controlling device * Output: * 0/1 - on success (normal Bypass mode/ Disable bypass) - * -1 - on failure (device is not capable of the operation ordevice not support Bypass - * or it's a slave device) + * -1 - on failure (device is not capable of the operation ordevice not support Bypass + * or it's a slave device) **/ int get_dis_bypass_sd(int if_index); @@ -172,9 +172,9 @@ int get_dis_bypass_sd(int if_index); * @if_index: network device index of the controlling device * @bypass_mode: bypass mode setting at power off state (1=BP en, 0=BP Dis) * Output: - * 0 - on success - * -1 - on failure (device is not capable of the operation ordevice not support Bypass - * or it's a slave device) + * 0 - on success + * -1 - on failure (device is not capable of the operation ordevice not support Bypass + * or it's a slave device) **/ int set_bypass_pwoff_sd(int if_index, int bypass_mode); @@ -183,8 +183,8 @@ int set_bypass_pwoff_sd(int if_index, int bypass_mode); * @if_index: network device index of the controlling device * Output: * 0/1 - on success (Disable bypass at power off state / normal Bypass mode) - * -1 - on failure (device is not capable of the operation ordevice not support Bypass - * or it's a slave device) + * -1 - on failure (device is not capable of the operation ordevice not support Bypass + * or it's a slave device) **/ int get_bypass_pwoff_sd(int if_index); @@ -193,9 +193,9 @@ int get_bypass_pwoff_sd(int if_index); * @if_index: network device index of the controlling device * @bypass_mode: bypass mode setting at power up state (1=BP en, 0=BP Dis) * Output: - * 0 - on success - * -1 - on failure (device is not capable of the operation ordevice not support Bypass - * or it's a slave device) + * 0 - on success + * -1 - on failure (device is not capable of the operation ordevice not support Bypass + * or it's a slave device) **/ int set_bypass_pwup_sd(int if_index, int bypass_mode); @@ -204,8 +204,8 @@ int set_bypass_pwup_sd(int if_index, int bypass_mode); * @if_index: network device index of the controlling device * Output: * 0/1 - on success (Disable bypass at power up state / normal Bypass mode) - * -1 - on failure (device is not capable of the operation ordevice not support Bypass - * or it's a slave device) + * -1 - on failure (device is not capable of the operation ordevice not support Bypass + * or it's a slave device) **/ int get_bypass_pwup_sd(int if_index); @@ -213,50 +213,50 @@ int get_bypass_pwup_sd(int if_index); * set_bypass_wd - Set watchdog state * @if_index: network device index of the controlling device * @ms_timeout: requested timeout (in ms units), 0 for disabling the watchdog timer - * @ms_timeout_set(output): requested timeout (in ms units), + * @ms_timeout_set(output): requested timeout (in ms units), * that the adapter supports and will be used by the watchdog * Output: - * 0 - on success - * -1 - on failure (device is not capable of the operation ordevice not support Bypass - * or it's a slave device) + * 0 - on success + * -1 - on failure (device is not capable of the operation ordevice not support Bypass + * or it's a slave device) **/ int set_bypass_wd_sd(int if_index, int ms_timeout, int *ms_timeout_set); /** * get_bypass_wd - Get watchdog state * @if_index: network device index of the controlling device - * @ms_timeout (output): WDT timeout (in ms units), + * @ms_timeout (output): WDT timeout (in ms units), * -1 for unknown wdt status * 0 if WDT is disabled * Output: * 0 - on success - * -1 - on failure (device is not capable of the operation ordevice not support Bypass - * or it's a slave device) + * -1 - on failure (device is not capable of the operation ordevice not support Bypass + * or it's a slave device) **/ int get_bypass_wd_sd(int if_index, int *ms_timeout_set); /** * get_wd_expire_time - Get watchdog expire * @if_index: network device index of the controlling device - * @ms_time_left (output): time left till watchdog time expire, + * @ms_time_left (output): time left till watchdog time expire, * -1 if WDT has expired * 0 if WDT is disabled * Output: * 0 - on success - * -1 - on failure (device is not capable of the operation ordevice not support Bypass - * or it's a slave device or unknown wdt status) + * -1 - on failure (device is not capable of the operation ordevice not support Bypass + * or it's a slave device or unknown wdt status) **/ int get_wd_expire_time_sd(int if_index, int *ms_time_left); /** * reset_bypass_wd_timer - Reset watchdog timer * @if_index: network device index of the controlling device - * + * * Output: * 1 - on success * 0 - watchdog is not configured - * -1 - on failure (device is not capable of the operation ordevice not support Bypass - * or it's a slave device or unknown wdt status) + * -1 - on failure (device is not capable of the operation ordevice not support Bypass + * or it's a slave device or unknown wdt status) **/ int reset_bypass_wd_timer_sd(int if_index); @@ -264,53 +264,53 @@ int reset_bypass_wd_timer_sd(int if_index); * set_std_nic - Standard NIC mode of operation * @if_index: network device index of the controlling device * @nic_mode: 0/1 (Default Bypass mode / Standard NIC mode) - * + * * Output: * 0 - on success - * -1 - on failure (device is not capable of the operation ordevice not support Bypass - * or it's a slave device) + * -1 - on failure (device is not capable of the operation ordevice not support Bypass + * or it's a slave device) **/ int set_std_nic_sd(int if_index, int nic_mode); /** * get_std_nic - Get Standard NIC mode setting * @if_index: network device index of the controlling device - * + * * Output: * 0/1 (Default Bypass mode / Standard NIC mode) on success - * -1 - on failure (device is not capable of the operation ordevice not support Bypass - * or it's a slave device) + * -1 - on failure (device is not capable of the operation ordevice not support Bypass + * or it's a slave device) **/ int get_std_nic_sd(int if_index); /** - * set_tx - set transmitter enable/disable + * set_tx - set transmitter enable/disable * @if_index: network device index of the controlling device * @tx_state: 0/1 (Transmit Disable / Transmit Enable) - * + * * Output: * 0 - on success - * -1 - on failure (device is not capable of the operation ) + * -1 - on failure (device is not capable of the operation ) **/ int set_tx_sd(int if_index, int tx_state); /** * get_std_nic - get transmitter state (disable / enable) * @if_index: network device index of the controlling device - * + * * Output: * 0/1 (ransmit Disable / Transmit Enable) on success - * -1 - on failure (device is not capable of the operation ordevice not support Bypass) + * -1 - on failure (device is not capable of the operation ordevice not support Bypass) **/ int get_tx_sd(int if_index); /** * set_tap - set TAP state * @if_index: network device index of the controlling device - * @tap_mode: 1 tap mode , 0 normal nic mode + * @tap_mode: 1 tap mode , 0 normal nic mode * Output: * 0 - on success - * -1 - on failure (device not support TAP or it's a slave device) + * -1 - on failure (device not support TAP or it's a slave device) **/ int set_tap_sd(int if_index, int tap_mode); @@ -319,7 +319,7 @@ int set_tap_sd(int if_index, int tap_mode); * @if_index: network device index of the controlling device * Output: * 0/1 - (off/on) on success - * -1 - on failure (device not support TAP or it's a slave device) + * -1 - on failure (device not support TAP or it's a slave device) **/ int get_tap_sd(int if_index); @@ -328,7 +328,7 @@ int get_tap_sd(int if_index); * @if_index: network device index of the controlling device * Output: * 0/1 - (off/on) on success - * -1 - on failure (device not support TAP or it's a slave device) + * -1 - on failure (device not support TAP or it's a slave device) **/ int get_tap_change_sd(int if_index); @@ -338,8 +338,8 @@ int get_tap_change_sd(int if_index); * @dis_tap: disable tap(1=dis, 0=en) * Output: * 0 - on success - * -1 - on failure (device is not capable of the operation ordevice not support TAP - * or it's a slave device) + * -1 - on failure (device is not capable of the operation ordevice not support TAP + * or it's a slave device) **/ int set_dis_tap_sd(int if_index, int dis_tap); @@ -348,8 +348,8 @@ int set_dis_tap_sd(int if_index, int dis_tap); * @if_index: network device index of the controlling device * Output: * 0/1 - on success (normal TAP mode/ Disable TAP) - * -1 - on failure (device is not capable of the operation ordevice not support TAP - * or it's a slave device) + * -1 - on failure (device is not capable of the operation ordevice not support TAP + * or it's a slave device) **/ int get_dis_tap_sd(int if_index); @@ -358,9 +358,9 @@ int get_dis_tap_sd(int if_index); * @if_index: network device index of the controlling device * @bypass_mode: tap mode setting at power up state (1=TAP en, 0=TAP Dis) * Output: - * 0 - on success - * -1 - on failure (device is not capable of the operation ordevice not support TAP - * or it's a slave device) + * 0 - on success + * -1 - on failure (device is not capable of the operation ordevice not support TAP + * or it's a slave device) **/ int set_tap_pwup_sd(int if_index, int tap_mode); @@ -369,18 +369,18 @@ int set_tap_pwup_sd(int if_index, int tap_mode); * @if_index: network device index of the controlling device * Output: * 0/1 - on success (Disable TAP at power up state / normal TAP mode) - * -1 - on failure (device is not capable of the operation ordevice not support TAP - * or it's a slave device) + * -1 - on failure (device is not capable of the operation ordevice not support TAP + * or it's a slave device) **/ int get_tap_pwup_sd(int if_index); /** * set_bp_disc - set Disconnect state * @if_index: network device index of the controlling device - * @tap_mode: 1 disc mode , 0 non-disc mode + * @tap_mode: 1 disc mode , 0 non-disc mode * Output: * 0 - on success - * -1 - on failure (device not support Disconnect or it's a slave device) + * -1 - on failure (device not support Disconnect or it's a slave device) **/ int set_bp_disc_sd(int if_index, int disc_mode); @@ -389,7 +389,7 @@ int set_bp_disc_sd(int if_index, int disc_mode); * @if_index: network device index of the controlling device * Output: * 0/1 - (off/on) on success - * -1 - on failure (device not support Disconnect or it's a slave device) + * -1 - on failure (device not support Disconnect or it's a slave device) **/ int get_bp_disc_sd(int if_index); @@ -398,7 +398,7 @@ int get_bp_disc_sd(int if_index); * @if_index: network device index of the controlling device * Output: * 0/1 - (off/on) on success - * -1 - on failure (device not support Disconnect or it's a slave device) + * -1 - on failure (device not support Disconnect or it's a slave device) **/ int get_bp_disc_change_sd(int if_index); @@ -408,8 +408,8 @@ int get_bp_disc_change_sd(int if_index); * @dis_tap: disable tap(1=dis, 0=en) * Output: * 0 - on success - * -1 - on failure (device is not capable ofthe operation ordevice not support Disconnect - * or it's a slave device) + * -1 - on failure (device is not capable ofthe operation ordevice not support Disconnect + * or it's a slave device) **/ int set_bp_dis_disc_sd(int if_index, int dis_disc); @@ -418,8 +418,8 @@ int set_bp_dis_disc_sd(int if_index, int dis_disc); * @if_index: network device index of the controlling device * Output: * 0/1 - on success (normal Disconnect mode/ Disable Disconnect) - * -1 - on failure (device is not capable of the operation ordevice not support Disconnect - * or it's a slave device) + * -1 - on failure (device is not capable of the operation ordevice not support Disconnect + * or it's a slave device) **/ int get_bp_dis_disc_sd(int if_index); @@ -428,9 +428,9 @@ int get_bp_dis_disc_sd(int if_index); * @if_index: network device index of the controlling device * @disc_mode: tap mode setting at power up state (1=Disc en, 0=Disc Dis) * Output: - * 0 - on success - * -1 - on failure (device is not capable of the operation ordevice not support Disconnect - * or it's a slave device) + * 0 - on success + * -1 - on failure (device is not capable of the operation ordevice not support Disconnect + * or it's a slave device) **/ int set_bp_disc_pwup_sd(int if_index, int disc_mode); @@ -439,18 +439,18 @@ int set_bp_disc_pwup_sd(int if_index, int disc_mode); * @if_index: network device index of the controlling device * Output: * 0/1 - on success (Disable Disconnect at power up state / normal Disconnect mode) - * -1 - on failure (device is not capable of the operation ordevice not support TAP - * or it's a slave device) + * -1 - on failure (device is not capable of the operation ordevice not support TAP + * or it's a slave device) **/ int get_bp_disc_pwup_sd(int if_index); /** * set_wd_exp_mode - Set adapter state when WDT expired. * @if_index: network device index of the controlling device - * @bypass_mode: adapter mode (1=tap mode, 0=bypass mode) + * @bypass_mode: adapter mode (1=tap mode, 0=bypass mode) * Output: * 0 - on success - * -1 - on failure (device not support Bypass or it's a slave device) + * -1 - on failure (device not support Bypass or it's a slave device) **/ int set_wd_exp_mode_sd(int if_index, int bypass_mode); @@ -459,39 +459,39 @@ int set_wd_exp_mode_sd(int if_index, int bypass_mode); * @if_index: network device index of the controlling device * Output: * 0/1 - (bypass/tap) on success - * -1 - on failure (device not support Bypass or it's a slave device) + * -1 - on failure (device not support Bypass or it's a slave device) **/ int get_wd_exp_mode_sd(int if_index); /** * set_wd_autoreset - reset WDT periodically. * @if_index: network device index of the controlling device - * @bypass_mode: adapter mode (1=tap mode, 0=bypass mode) + * @bypass_mode: adapter mode (1=tap mode, 0=bypass mode) * Output: * 1 - on success - * -1 - on failure (device is not capable of the operation ordevice not support Bypass - * or it's a slave device or unknown wdt status) + * -1 - on failure (device is not capable of the operation ordevice not support Bypass + * or it's a slave device or unknown wdt status) **/ int set_wd_autoreset_sd(int if_index, int time); /** * set_wd_autoreset - reset WDT periodically. * @if_index: network device index of the controlling device - * @bypass_mode: adapter mode (1=tap mode, 0=bypass mode) + * @bypass_mode: adapter mode (1=tap mode, 0=bypass mode) * Output: * 1 - on success - * -1 - on failure (device is not capable of the operation ordevice not support Bypass - * or it's a slave device or unknown wdt status) + * -1 - on failure (device is not capable of the operation ordevice not support Bypass + * or it's a slave device or unknown wdt status) **/ int get_wd_autoreset_sd(int if_index); /** * set_tpl - set TPL state * @if_index: network device index of the controlling device - * @tpl_mode: 1 tpl mode , 0 normal nic mode + * @tpl_mode: 1 tpl mode , 0 normal nic mode * Output: * 0 - on success - * -1 - on failure (device not support TPL) + * -1 - on failure (device not support TPL) **/ int set_tpl_sd(int if_index, int tpl_mode); @@ -500,7 +500,7 @@ int set_tpl_sd(int if_index, int tpl_mode); * @if_index: network device index of the controlling device * Output: * 0/1 - (off/on) on success - * -1 - on failure (device not support TPL or it's a slave device) + * -1 - on failure (device not support TPL or it's a slave device) **/ int get_tpl_sd(int if_index); -- 2.34.1