From c73190fa2e3ab6b441170ce23bd4bd7a44e213fd Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 18 Nov 2008 11:11:18 -0800 Subject: [PATCH] Staging: comedi: dt9812: remove dt9812.h An extra .h file is not needed for the dt9812 driver so merge it into the .c file. Cc: Anders Blomdell Cc: David Schleef Cc: Frank Mori Hess Cc: Ian Abbott Signed-off-by: Greg Kroah-Hartman --- drivers/staging/comedi/drivers/dt9812.c | 207 ++++++++++++++++++++++- drivers/staging/comedi/drivers/dt9812.h | 210 ------------------------ 2 files changed, 206 insertions(+), 211 deletions(-) delete mode 100644 drivers/staging/comedi/drivers/dt9812.h diff --git a/drivers/staging/comedi/drivers/dt9812.c b/drivers/staging/comedi/drivers/dt9812.c index e93c308c8325..3ded199cf1b0 100644 --- a/drivers/staging/comedi/drivers/dt9812.c +++ b/drivers/staging/comedi/drivers/dt9812.c @@ -53,7 +53,212 @@ for my needs. #include #include "../comedidev.h" -#include "dt9812.h" + +#define DT9812_DIAGS_BOARD_INFO_ADDR 0xFBFF +#define DT9812_MAX_WRITE_CMD_PIPE_SIZE 32 +#define DT9812_MAX_READ_CMD_PIPE_SIZE 32 + +/* + * See Silican Laboratories C8051F020/1/2/3 manual + */ +#define F020_SFR_P4 0x84 +#define F020_SFR_P1 0x90 +#define F020_SFR_P2 0xa0 +#define F020_SFR_P3 0xb0 +#define F020_SFR_AMX0CF 0xba +#define F020_SFR_AMX0SL 0xbb +#define F020_SFR_ADC0CF 0xbc +#define F020_SFR_ADC0L 0xbe +#define F020_SFR_ADC0H 0xbf +#define F020_SFR_DAC0L 0xd2 +#define F020_SFR_DAC0H 0xd3 +#define F020_SFR_DAC0CN 0xd4 +#define F020_SFR_DAC1L 0xd5 +#define F020_SFR_DAC1H 0xd6 +#define F020_SFR_DAC1CN 0xd7 +#define F020_SFR_ADC0CN 0xe8 + +#define F020_MASK_ADC0CF_AMP0GN0 0x01 +#define F020_MASK_ADC0CF_AMP0GN1 0x02 +#define F020_MASK_ADC0CF_AMP0GN2 0x04 + +#define F020_MASK_ADC0CN_AD0EN 0x80 +#define F020_MASK_ADC0CN_AD0INT 0x20 +#define F020_MASK_ADC0CN_AD0BUSY 0x10 + +#define F020_MASK_DACxCN_DACxEN 0x80 + +typedef enum { + /* A/D D/A DI DO CT */ + DT9812_DEVID_DT9812_10, /* 8 2 8 8 1 +/- 10V */ + DT9812_DEVID_DT9812_2PT5,/* 8 2 8 8 1 0-2.44V */ +#if 0 + DT9812_DEVID_DT9813, /* 16 2 4 4 1 +/- 10V */ + DT9812_DEVID_DT9814 /* 24 2 0 0 1 +/- 10V */ +#endif +} dt9812_devid_t; + +typedef enum { + DT9812_GAIN_0PT25 = 1, + DT9812_GAIN_0PT5 = 2, + DT9812_GAIN_1 = 4, + DT9812_GAIN_2 = 8, + DT9812_GAIN_4 = 16, + DT9812_GAIN_8 = 32, + DT9812_GAIN_16 = 64, +} dt9812_gain_t; + +typedef enum { + DT9812_LEAST_USB_FIRMWARE_CMD_CODE = 0, + /* Write Flash memory */ + DT9812_W_FLASH_DATA = 0, + /* Read Flash memory misc config info */ + DT9812_R_FLASH_DATA = 1, + + /* + * Register read/write commands for processor + */ + + /* Read a single byte of USB memory */ + DT9812_R_SINGLE_BYTE_REG = 2, + /* Write a single byte of USB memory */ + DT9812_W_SINGLE_BYTE_REG = 3, + /* Multiple Reads of USB memory */ + DT9812_R_MULTI_BYTE_REG = 4, + /* Multiple Writes of USB memory */ + DT9812_W_MULTI_BYTE_REG = 5, + /* Read, (AND) with mask, OR value, then write (single) */ + DT9812_RMW_SINGLE_BYTE_REG = 6, + /* Read, (AND) with mask, OR value, then write (multiple) */ + DT9812_RMW_MULTI_BYTE_REG = 7, + + /* + * Register read/write commands for SMBus + */ + + /* Read a single byte of SMBus */ + DT9812_R_SINGLE_BYTE_SMBUS = 8, + /* Write a single byte of SMBus */ + DT9812_W_SINGLE_BYTE_SMBUS = 9, + /* Multiple Reads of SMBus */ + DT9812_R_MULTI_BYTE_SMBUS = 10, + /* Multiple Writes of SMBus */ + DT9812_W_MULTI_BYTE_SMBUS = 11, + + /* + * Register read/write commands for a device + */ + + /* Read a single byte of a device */ + DT9812_R_SINGLE_BYTE_DEV = 12, + /* Write a single byte of a device */ + DT9812_W_SINGLE_BYTE_DEV = 13, + /* Multiple Reads of a device */ + DT9812_R_MULTI_BYTE_DEV = 14, + /* Multiple Writes of a device */ + DT9812_W_MULTI_BYTE_DEV = 15, + + /* Not sure if we'll need this */ + DT9812_W_DAC_THRESHOLD = 16, + + /* Set interrupt on change mask */ + DT9812_W_INT_ON_CHANGE_MASK = 17, + + /* Write (or Clear) the CGL for the ADC */ + DT9812_W_CGL = 18, + /* Multiple Reads of USB memory */ + DT9812_R_MULTI_BYTE_USBMEM = 19, + /* Multiple Writes to USB memory */ + DT9812_W_MULTI_BYTE_USBMEM = 20, + + /* Issue a start command to a given subsystem */ + DT9812_START_SUBSYSTEM = 21, + /* Issue a stop command to a given subsystem */ + DT9812_STOP_SUBSYSTEM = 22, + + /* calibrate the board using CAL_POT_CMD */ + DT9812_CALIBRATE_POT = 23, + /* set the DAC FIFO size */ + DT9812_W_DAC_FIFO_SIZE = 24, + /* Write or Clear the CGL for the DAC */ + DT9812_W_CGL_DAC = 25, + /* Read a single value from a subsystem */ + DT9812_R_SINGLE_VALUE_CMD = 26, + /* Write a single value to a subsystem */ + DT9812_W_SINGLE_VALUE_CMD = 27, + /* Valid DT9812_USB_FIRMWARE_CMD_CODE's will be less than this number */ + DT9812_MAX_USB_FIRMWARE_CMD_CODE, +} dt9812_usb_firmware_cmd_t; + +typedef struct { + u16 numbytes; + u16 address; +} dt9812_flash_data_t; + +#define DT9812_MAX_NUM_MULTI_BYTE_RDS \ + ((DT9812_MAX_WRITE_CMD_PIPE_SIZE - 4 - 1) / sizeof(u8)) + +typedef struct { + u8 count; + u8 address[DT9812_MAX_NUM_MULTI_BYTE_RDS]; +} dt9812_read_multi_t; + +typedef struct { + u8 address; + u8 value; +} dt9812_write_byte_t; + +#define DT9812_MAX_NUM_MULTI_BYTE_WRTS \ + ((DT9812_MAX_WRITE_CMD_PIPE_SIZE - 4 - 1) / sizeof(dt9812_write_byte_t)) + +typedef struct { + u8 count; + dt9812_write_byte_t write[DT9812_MAX_NUM_MULTI_BYTE_WRTS]; +} dt9812_write_multi_t; + +typedef struct { + u8 address; + u8 and_mask; + u8 or_value; +} dt9812_rmw_byte_t; + +#define DT9812_MAX_NUM_MULTI_BYTE_RMWS \ + ((DT9812_MAX_WRITE_CMD_PIPE_SIZE - 4 - 1) / sizeof(dt9812_rmw_byte_t)) + +typedef struct { + u8 count; + dt9812_rmw_byte_t rmw[DT9812_MAX_NUM_MULTI_BYTE_RMWS]; +} dt9812_rmw_multi_t; + +typedef struct dt9812_usb_cmd { + + u32 cmd; + union { + dt9812_flash_data_t flash_data_info; + dt9812_read_multi_t read_multi_info; + dt9812_write_multi_t write_multi_info; + dt9812_rmw_multi_t rmw_multi_info; + } u; +#if 0 + WRITE_BYTE_INFO WriteByteInfo; + READ_BYTE_INFO ReadByteInfo; + WRITE_MULTI_INFO WriteMultiInfo; + READ_MULTI_INFO ReadMultiInfo; + RMW_BYTE_INFO RMWByteInfo; + RMW_MULTI_INFO RMWMultiInfo; + DAC_THRESHOLD_INFO DacThresholdInfo; + INT_ON_CHANGE_MASK_INFO IntOnChangeMaskInfo; + CGL_INFO CglInfo; + SUBSYSTEM_INFO SubsystemInfo; + CAL_POT_CMD CalPotCmd; + WRITE_DEV_BYTE_INFO WriteDevByteInfo; + READ_DEV_BYTE_INFO ReadDevByteInfo; + WRITE_DEV_MULTI_INFO WriteDevMultiInfo; + READ_DEV_MULTI_INFO ReadDevMultiInfo; + READ_SINGLE_VALUE_INFO ReadSingleValueInfo; + WRITE_SINGLE_VALUE_INFO WriteSingleValueInfo; +#endif +} dt9812_usb_cmd_t; #define DT9812_NUM_SLOTS 16 diff --git a/drivers/staging/comedi/drivers/dt9812.h b/drivers/staging/comedi/drivers/dt9812.h deleted file mode 100644 index 471958a42220..000000000000 --- a/drivers/staging/comedi/drivers/dt9812.h +++ /dev/null @@ -1,210 +0,0 @@ -#ifndef __DT9812_H__ -#define __DT9812_H__ - -#define DT9812_DIAGS_BOARD_INFO_ADDR 0xFBFF -#define DT9812_MAX_WRITE_CMD_PIPE_SIZE 32 -#define DT9812_MAX_READ_CMD_PIPE_SIZE 32 - -/* - * See Silican Laboratories C8051F020/1/2/3 manual - */ -#define F020_SFR_P4 0x84 -#define F020_SFR_P1 0x90 -#define F020_SFR_P2 0xa0 -#define F020_SFR_P3 0xb0 -#define F020_SFR_AMX0CF 0xba -#define F020_SFR_AMX0SL 0xbb -#define F020_SFR_ADC0CF 0xbc -#define F020_SFR_ADC0L 0xbe -#define F020_SFR_ADC0H 0xbf -#define F020_SFR_DAC0L 0xd2 -#define F020_SFR_DAC0H 0xd3 -#define F020_SFR_DAC0CN 0xd4 -#define F020_SFR_DAC1L 0xd5 -#define F020_SFR_DAC1H 0xd6 -#define F020_SFR_DAC1CN 0xd7 -#define F020_SFR_ADC0CN 0xe8 - -#define F020_MASK_ADC0CF_AMP0GN0 0x01 -#define F020_MASK_ADC0CF_AMP0GN1 0x02 -#define F020_MASK_ADC0CF_AMP0GN2 0x04 - -#define F020_MASK_ADC0CN_AD0EN 0x80 -#define F020_MASK_ADC0CN_AD0INT 0x20 -#define F020_MASK_ADC0CN_AD0BUSY 0x10 - -#define F020_MASK_DACxCN_DACxEN 0x80 - -typedef enum { - /* A/D D/A DI DO CT */ - DT9812_DEVID_DT9812_10, /* 8 2 8 8 1 +/- 10V */ - DT9812_DEVID_DT9812_2PT5,/* 8 2 8 8 1 0-2.44V */ -#if 0 - DT9812_DEVID_DT9813, /* 16 2 4 4 1 +/- 10V */ - DT9812_DEVID_DT9814 /* 24 2 0 0 1 +/- 10V */ -#endif -} dt9812_devid_t; - -typedef enum { - DT9812_GAIN_0PT25 = 1, - DT9812_GAIN_0PT5 = 2, - DT9812_GAIN_1 = 4, - DT9812_GAIN_2 = 8, - DT9812_GAIN_4 = 16, - DT9812_GAIN_8 = 32, - DT9812_GAIN_16 = 64, -} dt9812_gain_t; - -typedef enum { - DT9812_LEAST_USB_FIRMWARE_CMD_CODE = 0, - /* Write Flash memory */ - DT9812_W_FLASH_DATA = 0, - /* Read Flash memory misc config info */ - DT9812_R_FLASH_DATA = 1, - - /* - * Register read/write commands for processor - */ - - /* Read a single byte of USB memory */ - DT9812_R_SINGLE_BYTE_REG = 2, - /* Write a single byte of USB memory */ - DT9812_W_SINGLE_BYTE_REG = 3, - /* Multiple Reads of USB memory */ - DT9812_R_MULTI_BYTE_REG = 4, - /* Multiple Writes of USB memory */ - DT9812_W_MULTI_BYTE_REG = 5, - /* Read, (AND) with mask, OR value, then write (single) */ - DT9812_RMW_SINGLE_BYTE_REG = 6, - /* Read, (AND) with mask, OR value, then write (multiple) */ - DT9812_RMW_MULTI_BYTE_REG = 7, - - /* - * Register read/write commands for SMBus - */ - - /* Read a single byte of SMBus */ - DT9812_R_SINGLE_BYTE_SMBUS = 8, - /* Write a single byte of SMBus */ - DT9812_W_SINGLE_BYTE_SMBUS = 9, - /* Multiple Reads of SMBus */ - DT9812_R_MULTI_BYTE_SMBUS = 10, - /* Multiple Writes of SMBus */ - DT9812_W_MULTI_BYTE_SMBUS = 11, - - /* - * Register read/write commands for a device - */ - - /* Read a single byte of a device */ - DT9812_R_SINGLE_BYTE_DEV = 12, - /* Write a single byte of a device */ - DT9812_W_SINGLE_BYTE_DEV = 13, - /* Multiple Reads of a device */ - DT9812_R_MULTI_BYTE_DEV = 14, - /* Multiple Writes of a device */ - DT9812_W_MULTI_BYTE_DEV = 15, - - /* Not sure if we'll need this */ - DT9812_W_DAC_THRESHOLD = 16, - - /* Set interrupt on change mask */ - DT9812_W_INT_ON_CHANGE_MASK = 17, - - /* Write (or Clear) the CGL for the ADC */ - DT9812_W_CGL = 18, - /* Multiple Reads of USB memory */ - DT9812_R_MULTI_BYTE_USBMEM = 19, - /* Multiple Writes to USB memory */ - DT9812_W_MULTI_BYTE_USBMEM = 20, - - /* Issue a start command to a given subsystem */ - DT9812_START_SUBSYSTEM = 21, - /* Issue a stop command to a given subsystem */ - DT9812_STOP_SUBSYSTEM = 22, - - /* calibrate the board using CAL_POT_CMD */ - DT9812_CALIBRATE_POT = 23, - /* set the DAC FIFO size */ - DT9812_W_DAC_FIFO_SIZE = 24, - /* Write or Clear the CGL for the DAC */ - DT9812_W_CGL_DAC = 25, - /* Read a single value from a subsystem */ - DT9812_R_SINGLE_VALUE_CMD = 26, - /* Write a single value to a subsystem */ - DT9812_W_SINGLE_VALUE_CMD = 27, - /* Valid DT9812_USB_FIRMWARE_CMD_CODE's will be less than this number */ - DT9812_MAX_USB_FIRMWARE_CMD_CODE, -} dt9812_usb_firmware_cmd_t; - -typedef struct { - u16 numbytes; - u16 address; -} dt9812_flash_data_t; - -#define DT9812_MAX_NUM_MULTI_BYTE_RDS \ - ((DT9812_MAX_WRITE_CMD_PIPE_SIZE - 4 - 1) / sizeof(u8)) - -typedef struct { - u8 count; - u8 address[DT9812_MAX_NUM_MULTI_BYTE_RDS]; -} dt9812_read_multi_t; - -typedef struct { - u8 address; - u8 value; -} dt9812_write_byte_t; - -#define DT9812_MAX_NUM_MULTI_BYTE_WRTS \ - ((DT9812_MAX_WRITE_CMD_PIPE_SIZE - 4 - 1) / sizeof(dt9812_write_byte_t)) - -typedef struct { - u8 count; - dt9812_write_byte_t write[DT9812_MAX_NUM_MULTI_BYTE_WRTS]; -} dt9812_write_multi_t; - -typedef struct { - u8 address; - u8 and_mask; - u8 or_value; -} dt9812_rmw_byte_t; - -#define DT9812_MAX_NUM_MULTI_BYTE_RMWS \ - ((DT9812_MAX_WRITE_CMD_PIPE_SIZE - 4 - 1) / sizeof(dt9812_rmw_byte_t)) - -typedef struct { - u8 count; - dt9812_rmw_byte_t rmw[DT9812_MAX_NUM_MULTI_BYTE_RMWS]; -} dt9812_rmw_multi_t; - -typedef struct dt9812_usb_cmd { - - u32 cmd; - union { - dt9812_flash_data_t flash_data_info; - dt9812_read_multi_t read_multi_info; - dt9812_write_multi_t write_multi_info; - dt9812_rmw_multi_t rmw_multi_info; - } u; -#if 0 - WRITE_BYTE_INFO WriteByteInfo; - READ_BYTE_INFO ReadByteInfo; - WRITE_MULTI_INFO WriteMultiInfo; - READ_MULTI_INFO ReadMultiInfo; - RMW_BYTE_INFO RMWByteInfo; - RMW_MULTI_INFO RMWMultiInfo; - DAC_THRESHOLD_INFO DacThresholdInfo; - INT_ON_CHANGE_MASK_INFO IntOnChangeMaskInfo; - CGL_INFO CglInfo; - SUBSYSTEM_INFO SubsystemInfo; - CAL_POT_CMD CalPotCmd; - WRITE_DEV_BYTE_INFO WriteDevByteInfo; - READ_DEV_BYTE_INFO ReadDevByteInfo; - WRITE_DEV_MULTI_INFO WriteDevMultiInfo; - READ_DEV_MULTI_INFO ReadDevMultiInfo; - READ_SINGLE_VALUE_INFO ReadSingleValueInfo; - WRITE_SINGLE_VALUE_INFO WriteSingleValueInfo; -#endif -} dt9812_usb_cmd_t; - -#endif -- 2.34.1