From c751a3d58cf2dae89ec941a259025b0175d67b0c Mon Sep 17 00:00:00 2001 From: Vlad Yasevich Date: Sat, 5 Apr 2014 06:25:26 +0000 Subject: [PATCH] e1000e: Correctly include VLAN_HLEN when changing interface MTU When changing the interface mtu, the driver starts with a value that doesn't include VLAN_HLEN. Later tests in the driver set the rx_buffer_len based on the mtu. As a result, when the user increases the mtu to 1504 (to support 802.1AD for example), the driver rx_buffer_len does not change and frames longer the 1522 bytes are rejected as too long. Include VLAN_HLEN from the start so that an user mtu greater then 1500 bytes is correctly reflected in the driver rx_buffer_len. CC: e1000-devel@lists.sourceforge.net Signed-off-by: Vlad Yasevich Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/e1000e/netdev.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c index d50c91e50528..165f7bcd66ae 100644 --- a/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/drivers/net/ethernet/intel/e1000e/netdev.c @@ -5687,7 +5687,7 @@ struct rtnl_link_stats64 *e1000e_get_stats64(struct net_device *netdev, static int e1000_change_mtu(struct net_device *netdev, int new_mtu) { struct e1000_adapter *adapter = netdev_priv(netdev); - int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN; + int max_frame = new_mtu + VLAN_HLEN + ETH_HLEN + ETH_FCS_LEN; /* Jumbo frame support */ if ((max_frame > ETH_FRAME_LEN + ETH_FCS_LEN) && -- 2.34.1